Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reference Model Project”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Divergence in land surface modeling: linking spread to structure

Divergence in land carbon cycle simulation is persistent and widespread. Regardless of model intercomparison project, results from individual models diverge significantly from each other and, in consequence, from reference datasets. Here we link model spread to structure using a 15-member ensemble of land surface models from the Multi-scale synthesis and Terrestrial Model Intercomparison Project (MsTMIP) as a test case. Our analysis uses functional benchmarks and model structure as predicted by model skill in a machine learning framework to isolate discrete aspects of model structure associated with divergence. We also quantify how initial conditions prejudice present-day model outcomes after centennial-scale transient simulations. Overall, the functional benchmark and machine learning exercises emphasize the importance of ecosystem structure in correctly simulating carbon and water cycling, highlight uncertainties in the structure of carbon pools, and advise against hard parametric limits on ecosystem function. We also find that initial conditions explain 90% of variation in global satellite-era values—initial conditions largely predetermine transient endpoints, historical environmental change notwithstanding. As MsTMIP prescribes forcing data and spin-up protocol, the range in initial conditions and high levels of predetermination are also structural. Our results suggest that methodological tools linking divergence to discrete aspects of model structure would complement current community best practices in model development.

58 GEOSCIENCES↗

CMIP6-based Multi-model Hydroclimate Projection over the Conterminous US, Version 1.1

This dataset presents a suite of high-resolution downscaled hydro-climate projections over the conterminous United States (CONUS) based on multiple selected Global Climate Models (GCMs) from the Coupled Models Intercomparison Project phase 6 (CMIP6). The CMIP6 GCMs are downscaled using either statistical (DBCCA) or dynamical (RegCM) downscaling approaches based on two meteorological reference datasets (Daymet and Livneh). Subsequently, the downscaled precipitation, temperature, and wind speed are employed to drive two calibrated hydrologic models (VIC and PRMS), enabling the simulation of projected future hydrologic responses across the CONUS. Each ensemble member covers the 1980-2019 baseline and 2020-2059 near-future periods under the high-end (SSP585) emission scenario. Moreover, utilizing only DBCCA and Daymet, the projections are further extended to the 2060-2099 far-future period and across three additional emission scenarios (SSP370, SSP245, and SSP126). This dataset is formulated to support the SECURE Water Act Section 9505 Assessment for the US Department of Energy (DOE) Water Power Technologies Office (WPTO). For further details on this dataset, please refer to Kao et al. (2022) and Rastogi et al. (2022).

13 HYDRO ENERGY↗

The contribution of CEOP data to the understanding and modeling of monsoon systems

CEOP has contributed and will continue to provide integrated data sets from diverse platforms for better understanding of the water and energy cycles, and for validating models. In this talk, I will show examples of how CEOP has contributed to the formulation of a strategy for the study of the monsoon as a system. The CEOP data concept has led to the development of the CEOP Inter-Monsoon Studies (CIMS), which focuses on the identification of model bias, and improvement of model physics such as the diurnal and annual cycles. A multi-model validation project focusing on diurnal variability of the East Asian monsoon, and using CEOP reference site data, as well as CEOP integrated satellite data is now ongoing. Similar validation projects in other monsoon regions are being started. Preliminary studies show that climate models have difficulties in simulating the diurnal signals of total rainfall, rainfall intensity and frequency of occurrence, which have different peak hours, depending on locations. Further more model diurnal cycle of rainfall in monsoon regions tend to lead the observed by about 2-3 hours. These model bias offer insight into lack of, or poor representation of key components of the convective,and stratiform rainfall. The CEOP data also stimulated studies to compare and contrasts monsoon variability in different parts of the world. It was found that seasonal wind reversal, orographic effects, monsoon depressions, meso-scale convective complexes, SST and land surface land influences are common features in all monsoon regions. Strong intraseasonal variability is present in all monsoon regions. While there is a clear demarcation of onset, breaks and withdrawal in the Asian and Australian monsoon region associated with climatological intraseasonal variability, it is less clear in the American and Africa monsoon regions. The examination of satellite and reference site data in monsoon has led to preliminary model experiments to study the impact of aerosol on monsoon variability. I will show examples of how the study of the dynamics of aerosol-water cycle interactions in the monsoon region, can be best achieved using the CEOP data and modeling strategy.

Lau, William K. M.↗

The Radiative Forcing Model Intercomparison Project (RFMIP): Experimental protocol for CMIP6

The phrasing of the first of three questions motivating CMIP6 – “How does the Earth system respond to forcing?” – suggests that forcing is always well-known, yet the radiative forcing to which this question refers has historically been uncertain in coordinated experiments even as understanding of how best to infer radiative forcing has evolved. The Radiative Forcing Model Intercomparison Project (RFMIP) endorsed by CMIP6 seeks to provide a foundation for answering the question through three related activities: (i) accurate characterization of the effective radiative forcing relative to a near-preindustrial baseline and careful diagnosis of the components of this forcing; (ii) assessment of the absolute accuracy of clear-sky radiative transfer parameterizations against reference models on the global scales relevant for climate modeling; and (iii) identification of robust model responses to tightly specified aerosol radiative forcing from 1850 to present. Complete characterization of effective radiative forcing can be accomplished with 180 years (Tier 1) of atmosphere-only simulation using a sea-surface temperature and sea ice concentration climatology derived from the host model's preindustrial control simulation. Assessment of parameterization error requires trivial amounts of computation but the development of small amounts of infrastructure: new, spectrally detailed diagnostic output requested as two snapshots at present-day and preindustrial conditions, and results from the model's radiation code applied to specified atmospheric conditions. In conclusion, the search for robust responses to aerosol changes relies on the CMIP6 specification of anthropogenic aerosol properties; models using this specification can contribute to RFMIP with no additional simulation, while those using a full aerosol model are requested to perform at least one and up to four 165-year coupled ocean–atmosphere simulations at Tier 1.

54 ENVIRONMENTAL SCIENCES↗

Digital Architecture Planning Model

As part of the U.S. Department of Energy’s Light Water Reactor Sustainability Program, the Digital Architecture (DA) Project focuses on providing a model that nuclear utilities can refer to when planning deployment of advanced technologies. The digital architecture planning model (DAPM) is the methodology for mapping power plant operational and support activities into a DA that unifies all data sources needed by the utilities to operate their plants. The DA is defined as a collection of information technology capabilities needed to support and integrate a wide spectrum of real-time digital capabilities for performance improvements of nuclear power plants. DA can be thought of as integration of the separate instrumentation and control and information systems already in place in nuclear power plants, which are brought together for the purpose of creating new levels of automation in plant work activities. A major objective in DAPM development was to survey all key areas that needed to be reviewed in order for a utility to make knowledgeable decisions regarding needs and plans to implement a DA at the plant. The development was done in two steps. First, researchers surveyed the nuclear industry in order to learn their near-term plans for adopting new advanced capabilities and implementing a network (i.e., wireless and wire) infrastructure throughout the plant, including the power block. Secondly, a literature review covering regulatory documents, industry standards, and technical research reports and articles was conducted. The objective of the review was to identify key areas to be covered by the DAPM, which included the following: 1. The need for a DA and its benefits to the plant 2. Resources required to implement the DA 3. Challenges that need to be addressed and resolved to implement the DA 4. Roles and responsibilities of the DA implementation plan. The DAPM was developed based on results from the survey and the literature review. Model development, including the survey results and conclusions made about the key areas during the literature review, are described in this report.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Determination of atmospheric properties for STS-1 aerothermodynamic investigations

A procedure for determining an approximation to the freestream atmospheric properties along the Shuttle entry trajectory is presented. Meteorological data as input is obtained by rawinsondes from surface to 70 km, and meteorological spheres from 60-90 km, launched from Hawaii and California. The Langley Atmospheric Information Retrieval System (LAIRS) developed to approximate the atmospheric freestream properties along the flight path, is outlined, noting temperature and wind data are interpolated in altitude, while gradients and diurnal and semidiurnal coefficients are taken from the COSPAR reference atmosphere. The data are input to a model to project temperature profiles for the Shuttle descent, and the input atmospheric parameters are listed. Efforts are continuing in order to correct discrepancies in the generated profiles for regions below 3 km.

Price, J. M.↗

Hierarchical Ada robot programming system (HARPS)- A complete and working telerobot control system based on the NASREM model

HARPS is a telerobot control system that can perform some simple but useful tasks. This capability is demonstrated by performing the ORU exchange demonstration. HARPS is based on NASREM (NASA Standard Reference Model). All software is developed in Ada, and the project incorporates a number of different CASE (computer-aided software engineering) tools. NASREM was found to be a valid and useful model for building a telerobot control system. Its hierarchical and distributed structure creates a natural and logical flow for implementing large complex robust control systems. The ability of Ada to create and enforce abstraction enhanced the implementation of such control systems.

Leake, Stephen↗

NASA's Seasonal-to-Interannual Prediction Project: In Partnership With the NCCS

Researchers with NASA's Season-to-Interannual Prediction Project (NSIPP) refer to different types of memory when running models on NCCS computers: the computer memory required for their models and the memory of the atmosphere or the ocean. Because of the atmosphere's chaotic nature, its memory is short. For weather predictions, the initial information taken from atmospheric observations has a limited useful life. Currently, there is no way to take observations, initialize an atmosphere model, integrate ahead in time, and make an accurate weather forecast beyond about 2 weeks. After that, the system becomes chaotic. What conditions could be used to make predictions beyond 2 weeks? If not conditions in the atmosphere, then the memory must be found somewhere else. That place is in the oceans. Although most changes in the atmosphere vary on a short timescale, the weather being a prime example, some important large atmospheric climate variations occur over much longer timescales-month s, years, or decades. NSIPP is interested specifically in those phenomena that occur over timescales of several months to a few years, and the El Nino Southern Oscillation (ENSO) is the most significant of these.

Source record↗

Near-Term Reliability and Resilience (NTRR) (Final Report)

The Near-Term Reliability and Resiliency (NTRR) was awarded in December 2020 as an inter-lab project to examine the reliability and resilience of the electricity grid and natural gas transportation availability. The project builds on studies conducted by The North American Electric Reliability Corporation (NERC), the U.S. Department of Energy (DOE), and other non-governmental research and operational focused on reliability and resilience analyses challenges. The research was conceived to address near-term scenarios (within 10 years), when many local and regional policy transitions could begin to impact grid reliability, resilience, and supporting infrastructure availability. To integrate the natural gas interdependency, the team began with the generating capacity and demand projections from the 2020 NERC Long-Term Reliability Assessment and the Bulk Electric System (BES) transmission topologies defined in the Western Electricity Coordinating Council (WECC) Anchor Data Set, Eastern Interconnection Reliability Assessment Group Multi-Regional Modeling Working Group (ERAG/MMWG) Data Set, the team calculated baseline regional power sector gas demands from present electricity delivery year through the end of delivery year 2030/31 by applying security constrained economic dispatch. This demand was compiled along with demand projections for regional residential, commercial, and industrial natural gas demands from the most recent Energy Information Administration (EIA) Annual Energy Outlook Reference Case into Deloitte’s MarketBuilder® North American Gas Model. Through the application of these demands, MarketBuilder® was projected the topology of natural gas flows in the natural gas pipeline network across the interconnected North American system along with regional natural gas prices that may be seen by market participants in future years Additionally, contingencies and sensitivities focused on the built models of the Eastern Interconnection (EI) and Western Interconnection (WI). They address challenges from the following with the outcomes being an identification of performance under the extreme conditions and an identification of potential grid weaknesses that should be addressed to mitigate the reduced performance and improve the resilience and reliability of the specific regions as well as the National Grid: • Weather events including extreme heat, extreme cold, high wind, no wind, wind and solar forecasting errors, and wildfires. • Gas availability, factoring in supply disruption (contractual and physical), seasonal availability constraints, and infrastructure limitations; and • Transmission availability and congestion.

03 NATURAL GAS↗

End-of-Century Changes in Orographic Precipitation with the Intermediate Complexity Atmospheric Research Model over the Western United States

Abstract Downscaled precipitation projections were created using the Intermediate Complexity Atmospheric Research (ICAR) model over the western United States to increase the physical realism in orographic precipitation changes. End-of-century simulations from eight models in phase 5 of the Coupled Model Intercomparison Project (CMIP5) were downscaled with ICAR and compared to the widely utilized statistically downscaled dataset, localized constructed analogs (LOCAs), to understand where and why projections of cool-season (September–May) precipitation differed. ICAR and LOCA precipitation projections were similar, but their sign differed in hydrologically relevant regions likely due to ICAR’s simulation of microphysics and mesoscale dynamics with high-resolution topography (6 km). In the Pacific Northwest, cool-season precipitation projections from ICAR showed an increase on the windward side of the Cascades and no significant change within the lee. This difference between the windward and leeward side was attributed to reduced zonal wind speeds, allowing more time for microphysical processes within ICAR. This contrast is enhanced by rain’s faster fall speed compared to snow, limiting transport into the lee. Meanwhile, LOCA projected an increase in precipitation across the Cascades. In the Upper Colorado River basin, LOCA projected an increase in precipitation in high elevation regions (>3000 m), but ICAR projected no significant change or a decrease in precipitation. High elevation differences were most evident in the spring and fall and were also attributed to a snow-to-rain transition and dynamical processes that impacted orographic enhancement within ICAR. Idealized, controlled studies are needed to better isolate individual processes, but these results underscore the importance of including microphysics and mesoscale dynamics within regional-scale precipitation projections. Significance Statement A set of global climate model simulations was downscaled using an atmospheric model that contains key physical equations, referred to as Intermediate Complexity Atmospheric Research (ICAR). ICAR was used to examine projected changes in end-of-century cool-season precipitation over mountains in the western United States. Precipitation projections from ICAR were similar to projections that used statistical relationships to downscale climate projections. However, projections differed between ICAR and statistically downscaled datasets in whether they increased, decreased, or stayed the same in specific, hydrologically relevant regions such as the eastern Cascades and high elevation areas of the Upper Colorado River basin. These differences were attributed to the simulation of physical processes in ICAR. The results highlight the importance of kilometer-scale atmospheric processes in regional climate projections.

Currier, William Ryan [NOAA/Physical Sciences Labo↗

Economic Assessment of Nuclear Hybrid Energy Systems: Optimization using RAVEN

The energy market supply is under pressure to achieve competing goals, such as minimizing the cost of electricity and greenhouse gas emissions while achieving grid resilience and reliability and meeting regulatory requirements. To study different scenarios for possible evolutions of the energy market that assume a certain renewable penetration and the possible introduction of hybrid nuclear reactors, the HYBRID modeling and simulation project has been initiated by INL. The term hybrid nuclear reactor here refers to nuclear power plants that not only produce electricity, but can also sell heat to an industrial process, like a hydrogen generation or water desalination plant. The RAVEN (Risk Analysis Virtual Environment) code developed at INL together with the modeling language Modelica (the Dymola compiler is used) have been selected as the main modeling tools for the HYBRID modeling and simulation project. This summary outlines the challenge, presents an overview of the developments in the RAVEN code needed to solve it and shows an illustrative example calculation. The HYBRID modeling and simulation project is a multi laboratory effort, involving research teams from three different U.S. national laboratories, led by the Idaho National Laboratory (INL) and supported by the Argonne National Laboratory (ANL) and the Oak Ridge National Laboratory (ORNL)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Expansion of the Verified, Archived, Library of Inputs and Data (VALID) [Slides]

This project dialogue provides an update on the Expansion of Verified, Archived, Library of Inputs and Data or VALID. VALID is a QA-Like (Quality Assurance) process to generate high quality models from reliable reference descriptions and make those models available to users. This presentation provides a brief project overview, a reminder of cases added in FY2021, cases currently in progress, and future plans for VALID.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Map Projection Induced Variations in Locations of Polygon Geofence Edges

This Paper under-estimates answers to the following question under various constraints: If a geofencing algorithm uses a map projection to determine whether a position is inside/outside a polygon region, how far outside/inside the polygon can the point be and the algorithm determine that it is inside/outside (the opposite and therefore incorrect answer)? Geofencing systems for unmanned aircraft systems (UAS) often model stay-in and stay-out regions using 2D polygons with minimum and maximum altitudes. The vertices of the polygons are typically input as latitude-longitude pairs, and the edges as paths between adjacent vertices. There are numerous ways to generate these paths, resulting in numerous potential locations for the edges of stay-in and stay-out regions. These paths may be geodesics on a spherical model of the earth or geodesics on the WGS84 reference ellipsoid. In geofencing applications that use map projections, these paths are inverse images of straight lines in the projected plane. This projected plane may be a projection of a spherical earth model onto a tangent plane, called an orthographic projection. Alternatively, it may be a projection where the straight lines in the projected plane correspond to straight lines in the latitudelongitude coordinate system, also called a Plate Carr´ee projection. This paper estimates distances between different edge paths and an oracle path, which is a geodesic on either the spherical earth or the WGS84 ellipsoidal earth. This paper therefore estimates how far apart different edge paths can be rather than comparing their path lengths, which are not considered. Rather, the comparision is between the actual locations of the edges between vertices. For edges drawn using orthographic projections, this maximum distance increases as the distance from the polygon vertices to the projection point increases. For edges drawn using Plate Carr´ee projections, this maximum distance increases as the vertices become further from the equator. Distances between geodesics on a spherical earth and a WGS84 ellipsoidal earth are also analyzed, using the WGS84 ellipsoid as the oracle. Bounds on the 2D distance between a straight line and a great circle path, in an orthographically projected plane rather than on the surface of the earth, have been formally verified in the PVS theorem prover, meaning that they are mathematically correct in the absence of floating point errors.

Neeley, Paula↗

Develop and verify soil/structure interaction for pile/foundation interaction

Phase II of the Offshore Code Comparison Collaboration, Continued, with Correlation and unCertainty (OC6) project was used to verify the implementation of a new soil-structure interaction (SSI) model for use within offshore wind turbine modeling software. The REDWIN Macro-element model implemented and verified in this study enables a computationally efficient way to model the linear and nonlinear SSI problem, including hysteretic damping, of a monopile structure. The modeling approach was integrated into several modeling tools and a series of increasingly complex simulations was conducted using the IEA 10MW reference turbine mounted on a monopile support structure to verify the coupling between the tools and the REDWIN Macro-element SSI model. This campaign includes only numerical verification between various software and modeling approaches so no experimental measurements are available. The load cases (LC) considered include: LC1 – static response of the tower and substructure LC2 – frequency and mode-shape analysis of the tower and substructure LC3 – response of the tower and substructure due to wind-only loading LC4 – response of the tower and substructure due to wave-only loading LC5 – response of the tower and substructure due to wind and wave loading. Detailed properties of the modeled system are found in the following reference, “Bergua, Roger, Amy Robertson, Jason Jonkman, and Andy Platt. 2021. "Specification Document for OC6 Phase II: Verification of an Advanced Soil-Structure Interaction Model for Offshore Wind Turbines.” Golden, CO: National Renewable Energy Laboratory. NREL/TP-5000-79938. https://www.nlr.gov/docs/fy21osti/79938.pdf. Details on the results from the OC6 Phase II project can be found in the following reference, “Bergua R, Robertson A, Jonkman J, et al. OC6 Phase II: Integration and verification of a new soil–structure interaction model for offshore wind design.” Wind Energy. 2022;25(5):793-810. doi:10.1002/we.2698

17 WIND ENERGY↗

The Contribution of CEOP Data to the Understanding and Modeling of Monsoon Systems

CEOP has contributed and will continue to provide integrated data sets from diverse platforms for better understanding of the water and energy cycles, and for validaintg models. In this talk, I will show examples of how CEOP has contributed to the formulation of a strategy for the study of the monsoon as a system. The CEOP data concept has led to the development of the CEOP Inter-Monsoon Studies (CIMS), which focuses on the identification of model bias, and improvement of model physics such as the diurnal and annual cycles. A multi-model validation project focusing on diurnal variability of the East Asian monsoon, and using CEOP reference site data, as well as CEOP integrated satellite data is now ongoing. Preliminary studies show that climate models have difficulties in simulating the diurnal signals of total rainfall, rainfall intensity and frequency of occurrence, which have different peak hours, depending on locations. Further more model diurnal cycle of rainfall in monsoon regions tend to lead the observed by about 2-3 hours. These model bias offer insight into lack of, or poor representation of, key components of the convective and stratiform rainfall. The CEOP data also stimulated studies to compare and contrasts monsoon variability in different parts of the world. It was found that seasonal wind reversal, orographic effects, monsoon depressions, meso-scale convective complexes, SST and land surface land influences are common features in all monsoon regions. Strong intraseasonal variability is present in all monsoon regions. While there is a clear demarcation of onset, breaks and withdrawal in the Asian and Australian monsoon region associated with climatological intraseasonal variabillity, it is less clear in the American and Africa monsoon regions. The examination of satellite and reference site data in monsoon has led to preliminary model experiments to study the impact of aerosol on monsoon variability. I will show examples of how the study of the dynamics of aerosol-water cycle interactions in the monsoon region, can be best achieved using the CEOP data and modeling strategy.

Lau, William K. M.↗

Sodium-Cooled Fast Reactor Reference Plant Model

This report details the progress of Idaho National Laboratory (INL) in creating a reference plant multiphysics model for the Advanced Burner Test Reactor (ABTR). This model was developed under Task 13 of the U.S. Nuclear Regulatory Commission project “Development and Modeling Support for Advanced Non-Light Water Reactors,” and is an extension of the reference plant model developed in Task 4b, which was improved upon in the following ways. (1) The discrete ordinates method was used in lieu of the super-homogenization (SPH)-corrected diffusion approximation in order to better capture the anisotropic scattering contribution and the neutron leakage change due to thermal expansion. (2) The novel neutronic spatial discretization approach, termed the ring-heterogeneous (RH) approximation, was conceptualized and introduced to capture the differential expansion of the materials in the core. This new technique proved capable of preserving fission rates and maintaining the eigenvalue within 2.5% and 266 pcm with 9 neutron energy groups, respectively. Separating the different materials in the core enables the differential expansion of materials to be explicitly accounted for, eliminating the need for problem-specific cross-section functionalization techniques. (3) The SAM model for the core and system thermal-hydraulics analysis was updated to include 61 channels instead of just four representative ones. This enables users to obtain improved spatial resolution for sodium temperature and density scalar fields. (4) All the mesh files were created via the Multiphysics Object-Oriented Simulation Environment (MOOSE) Reactor module, eliminating all reliance on external tools for mesh creation. (5) Finally, the fuel axial expansion now leverages the HT9 and UPuZr material properties that have been validated against experimental data. The reference plant model was used to perform a full-core unprotected loss of flow (ULOF) transient calculation, including neutronics, thermal and mechanical feedback mechanisms. Future work will be devoted to further enhancements of the model. Potential improvements to the model include the addition of the control rod driveline expansion feedback and the upgrading of the support plate model so as to explicitly include 3D effects. Additionally, a Nuclear Energy Advanced Modeling and Simulation funded parallel effort has completely automated the creation of the ring-heterogeneous (RH) mesh from the fully heterogeneous (FH) geometry, thus maximizing user friendliness for the sodium fast reactor sodium-cooled fast reactor (SFR) workflow and will be incorporated in future work.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Models and Processes to Extract Drug-like Molecules From Natural Language Text

Researchers worldwide are seeking to repurpose existing drugs or discover new drugs to counter the disease caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). A promising source of candidates for such studies is molecules that have been reported in the scientific literature to be drug-like in the context of viral research. However, this literature is too large for human review and features unusual vocabularies for which existing named entity recognition (NER) models are ineffective. We report here on a project that leverages both human and artificial intelligence to detect references to such molecules in free text. We present 1) a iterative model-in-the-loop method that makes judicious use of scarce human expertise in generating training data for a NER model, and 2) the application and evaluation of this method to the problem of identifying drug-like molecules in the COVID-19 Open Research Dataset Challenge (CORD-19) corpus of 198,875 papers. We show that by repeatedly presenting human labelers only with samples for which an evolving NER model is uncertain, our human-machine hybrid pipeline requires only modest amounts of non-expert human labeling time (tens of hours to label 1778 samples) to generate an NER model with an F-1 score of 80.5%—on par with that of non-expert humans—and when applied to CORD’19, identifies 10,912 putative drug-like molecules. This enriched the computational screening team’s targets by 3,591 molecules, of which 18 ranked in the top 0.1% of all 6.6 million molecules screened for docking against the 3CLPro protein.

60 APPLIED LIFE SCIENCES↗

Plutonium Age Dating Interlaboratory Comparison Overview - Project Design, Sample Preparation, and Results [Slides]

Project Design – How do you validate measured Pu model age? There are no certified reference materials (CRMs) that are certified for Pu model age or purification dates. There are no Am isotopic CRMs - IRMM 0243 243 Am spike has 241 Am impurity that can be used; Community working toward "consensus ages." This project executed and evaluated results from a Pu age dating interlaboratory comparison with six IAEA NWAL participant laboratories. It also ran the first quality control evaluation of single-picogram to sub-picogram scale interlaboratory 241 Am assay measurements from cotton swipe matrices. Results are promising, with a majority of 241 Am/ 241 Pu model age results agree to within 1 to 4 years. The calculated 241 Am assay results show interlaboratory variability, expanded percent uncertainties on calculated consensus 241 Am concentrations were: PuAge-S1 = 3.1 %, PuAge-S2 = 23 %, and PuAge-S3 = 26 %. Data can be used to investigate laboratory methods and improve precision and accuracy of 241 Pu and 241 Am assay for future campaigns.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗