Search NASA⌕ Search

SEARCH · Search NASA

Results for “Regression approach”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS2007

A Method for Calculating the Probability of Successfully Completing a Rocket Propulsion Ground Test

Propulsion ground test facilities face the daily challenge of scheduling multiple customers into limited facility space and successfully completing their propulsion test projects. Over the last decade NASA s propulsion test facilities have performed hundreds of tests, collected thousands of seconds of test data, and exceeded the capabilities of numerous test facility and test article components. A logistic regression mathematical modeling technique has been developed to predict the probability of successfully completing a rocket propulsion test. A logistic regression model is a mathematical modeling approach that can be used to describe the relationship of several independent predictor variables X(sub 1), X(sub 2),.., X(sub k) to a binary or dichotomous dependent variable Y, where Y can only be one of two possible outcomes, in this case Success or Failure of accomplishing a full duration test. The use of logistic regression modeling is not new; however, modeling propulsion ground test facilities using logistic regression is both a new and unique application of the statistical technique. Results from this type of model provide project managers with insight and confidence into the effectiveness of rocket propulsion ground testing.

Messer, Bradley↗
NASA NTRS1990

Ridge Regression Signal Processing

The introduction of the Global Positioning System (GPS) into the National Airspace System (NAS) necessitates the development of Receiver Autonomous Integrity Monitoring (RAIM) techniques. In order to guarantee a certain level of integrity, a thorough understanding of modern estimation techniques applied to navigational problems is required. The extended Kalman filter (EKF) is derived and analyzed under poor geometry conditions. It was found that the performance of the EKF is difficult to predict, since the EKF is designed for a Gaussian environment. A novel approach is implemented which incorporates ridge regression to explain the behavior of an EKF in the presence of dynamics under poor geometry conditions. The basic principles of ridge regression theory are presented, followed by the derivation of a linearized recursive ridge estimator. Computer simulations are performed to confirm the underlying theory and to provide a comparative analysis of the EKF and the recursive ridge estimator.

Kuhl, Mark R.↗
NASA NTRSDate not supplied

The Added Value of SMAP Soil Moisture in Crop Yield Forecasting Over Argentina

Argentina is one of the major producers and exporter of soybeans, corn, and wheat to the world market; therefore, the accurate and timely forecasting of those crops yield is crucial to national crop management and global food security. Previous studies have mainly focused on developing forecasting models for a specific crop type and location using a single source of data (e.g., vegetation indices), thus providing little insight into the forecasting models' performance on different crop types and regions. Besides, these models are based on traditional statistical regression algorithms, while more advanced machine learning approaches have not been explored. This study investigated the estimation of crop yields of three major crops (corn, soybean, and winter wheat) using Multiple Linear Regression (MLR) and Support Vector Machine (SVM), over major growing provinces in Argentina. Our models were trained and evaluated on data from 2015 to 2020, where three remote sensing products (Normalized difference vegetation index (NDVI), SMAP soil moisture, and MODIS evapotranspiration) were used as predictors. Our results indicated that accurate crop yield forecasts using the developed regression models could be made one to two months before harvest. The MLR and SVM model performance varied among different crop types, where soybean and corn exhibited better predictability compare to the wheat. In most cases, the SVM outperformed the multiple linear regression model due to its ability to capture the nonlinear and complex features of the crop-production process. The forecasted model that combines data from multiple sources outperformed single-source satellite data. The highest accuracy was obtained when the three data sources were all considered in the model development. Results also indicated that the inclusion of SMAP soil moisture improved crop yield forecasting in most provinces, and the most significant improvements occurred in the drier region.

Nazmus Shams Sazib↗
NASA NTRS2020

Data Science for Weather Impacts on Crop Yield

Private businesses in sectors, such as food, energy, and retail, as well as public sector and federal agencies are interested in the predictive understanding of weather impacts on crop yield, which is an important aspect of food security. Scientific literature has mainly examined how crop yield is impacted by growing season-averaged weather indices. Although a few studies did consider weather extremes in their analysis, their scope was either restricted to measuring their conditional relationship with yield or the extreme event types considered were limited. Selection of regression models, whether the more commonly used linear approaches or nonlinear methods, have not been appropriately justified in this context. Here, we develop data-driven methods to examine two inter-related hypotheses for improved scientific understanding and enhanced predictive modeling. The first hypothesis, that extreme weather indices have a statistically significant information content in them is found to be valid based on linear and nonlinear methods for pairwise dependence. The second hypothesis, examines the value addition of nonlinear regression methods, and suggests that linear approaches may not alone be adequate. The results of this study can inform scientific understanding, generation and relevance of indices and end-to-end risk assessment systems in the context of climate impacts on crop yield. An immediate application may be in the context of NASA Earth Exchange (NEX) which facilitates the generation and dissemination of impacts relevant weather data and indices using a multitude of satellite-derived data sets and model outputs.

Data mining, food security, weather impacts↗
NASA NTRSDate not supplied

Uncertainty Quantification using Deep Ensembles for Decision Making in Cyber-Physical-Human Systems

In this paper and its companion, Differential Equation Approximation Using Gradient-Boosted Quantile Regression, Robison et al., we examine an approach to quantifying model uncertainty with the aim of increasing the trustworthiness of computational models in human-machine interactions. In Differential Equation Approximation Using Gradient-Boosted Quantile Regression, we focus on gradient-boosted decision trees, while in this one, we give more details about deep ensembles. Uncertainty quantification is crucial for building trustworthy autonomous decision-making agents in human-machine teams. There are two types of uncertainties: aleatoric and epistemic. The former is related to the inherent stochasticity (noise) of the process, whereas the latter is associated with the lack of knowledge or representation capability of models, such as neural networks. By lack of knowledge, we mean the model’s inability to accurately predict outputs for all possible inputs. The aleatory uncertainty can be estimated fairly easily with, for example, filters, whereas epistemic uncertainty is challenging to compute. This paper uses deep ensembles to quantify both aleatory and epistemic uncertainty. It can act as an uncertainty-aware surrogate transition model for decision-making frameworks. "Uncertainty-aware" means that the surrogate transition model should make predictions along with confidence in those predictions. In the context of decision-making, the transition models are ordinary differential equations (ODEs). Since ODEs can be simulated to make one-step or multi-step predictions, a good surrogate model for them should perform reasonably well in both modes. In a multi-step approach, the trajectory sampling method TS∞ was used to propagate uncertainty over multiple steps. The cartpole dynamical system was selected to demonstrate the ability of deep ensembles as good surrogate transition models for decision-making frameworks. The deep ensembles modeled the dynamics of cartpole ODEs and made uncertainty-aware predictions in single-step and multi-step transition modes.

CPH systems↗
NASA NTRS2011

Directed Incremental Symbolic Execution

The last few years have seen a resurgence of interest in the use of symbolic execution -- a program analysis technique developed more than three decades ago to analyze program execution paths. Scaling symbolic execution and other path-sensitive analysis techniques to large systems remains challenging despite recent algorithmic and technological advances. An alternative to solving the problem of scalability is to reduce the scope of the analysis. One approach that is widely studied in the context of regression analysis is to analyze the differences between two related program versions. While such an approach is intuitive in theory, finding efficient and precise ways to identify program differences, and characterize their effects on how the program executes has proved challenging in practice. In this paper, we present Directed Incremental Symbolic Execution (DiSE), a novel technique for detecting and characterizing the effects of program changes. The novelty of DiSE is to combine the efficiencies of static analysis techniques to compute program difference information with the precision of symbolic execution to explore program execution paths and generate path conditions affected by the differences. DiSE is a complementary technique to other reduction or bounding techniques developed to improve symbolic execution. Furthermore, DiSE does not require analysis results to be carried forward as the software evolves -- only the source code for two related program versions is required. A case-study of our implementation of DiSE illustrates its effectiveness at detecting and characterizing the effects of program changes.

Person, Suzette↗
NASA NTRS1974

Chain pooling to minimize prediction errors in subset regression

The existing theory of subset regression is examined, taking into account optimality criteria, small experiments, nonlinear models, colinearities, and special techniques. Approaches based on chain pooling coupled with principal components regression are discussed, giving attention to a comparison of half-normal plotting with chain pooling, a procedure based on prior ordering, deletion under the F-test, the largest of a set of chi-square variates, and principal components regression and model deletion. The choice of a true (population) model for simulations is considered along with the evaluation of the decision procedure and suitable computer programs.

Holms, A. G.↗
NASA NTRS1994

Modeling ozone episodes in the Baltimore-Washington region

Surface ozone (O3) concentrations in excess of the National Ambient Air Quality Standard (NAAQS) continue to occur in metropolitan areas in the United States despite efforts to control emissions of O3 precursors. Future O3 control strategies will be based on results from modeling efforts that have just begun in many areas. Two initial questions that arise are model sensitivity to domain-specific conditions and the selection of episodes for model evaluation and control strategy development. For the Baltimore-Washington region (B-W), the presence of the Chesapeake Bay introduces a number of issues relevant to model sensitivity. In this paper, the specific questions of the determination of model volume (mixing height) for the Urban Airshed Model (UAM) is discussed and various alternative methods compared. For the latter question, several analytic approaches, Cluster Analysis and classification and Regression Tree (CART) analysis are undertaken to determine meteorological conditions associated with severe O3 events in the B-W domain.

Ryan, William F.↗
NASA NTRS2002

Extreme Weather Events and Their Relationship to Low Frequency Teleconnection Patterns

A new method for identifying the structure and other characteristics of extreme weather events is introduced and applied to both model simulations and observations. The approach is based on a linear regression model that links daily extreme precipitation amounts for a particular point on the globe to precipitation and related quantities at all other points. We present here some initial results of our analysis of extreme precipitation events over the United States, including how they are influenced by ENSO and various large-scale teleconnection patterns such as the PNA. The results are based on simulations made with the NASA/NCAR AGCM (Lin and Rood 1996). The quality of the simulated climate for the NASA/NCAR AGCM forced with observed SSTs is described in Chang et al. (2001). The runs analyzed here consist of three 20-year runs forced with idealized cold, neutral and warm ENSO SST anomalies (superimposed on the mean seasonal cycle of SST). The idealized warm or cold SST anomalies are fixed throughout each 20- year simulation and consist of the first EOF (+/- 3 standard deviations) of monthly SST data. Comparisons are made with the results obtained from a similar analysis that uses daily NOAA precipitation observations (Higgins et al. 1996) over the United States and NCEP/NCAR reanalysis data for the period 1949-1998.

Chang, Yehui↗
NASA NTRS1979

Modern estimation techniques applied to microwave sensing of the marine boundary layer

Previous efforts in the area of satellite microwave sensing of the marine boundary layer have relied upon linear regression techniques to extract geophysical parameters from the microwave measurement data. The approach used in the present paper shifts emphasis away from the generation of regression weighting matrices which implicitly assume that the data are linear in the parameters to be determined and that the problem is statistically stationary. The idea is simply to employ modern computational estimation techniques to obtain parameter estimates from nonlinear noisy measurements. The approach is limited only to the region of validity of Grody's (1976) model. Attention is focused on documenting how estimation techniques, in particular the square root information filter (SRIF), are used to solve a nonlinear function optimization problem.

Bierman, G. J.↗
NASA NTRSDate not supplied

Generative Framework Approach to Match Landsat and Sentinel-2 Data

Linear regression and histogram matching based techniques have been widely used to minimize the surface reflectance difference between two similar satellite observations such as Landsat-8/9 and Sentinel-2A/B products [1]. However, regionally or globally derived conversion factors may not be suitable for all land cover types and locations, resulting in noticeable residual differences between the sensors. Generative Adversarial Network (GAN) has shown promise in the field of image processing for domain or style transfer[2]. In this work we aim to minimize the surface reflectance difference between Landsat and Sentinel-2 products based on GAN.

Sujit Roy↗
NASA NTRS2016

Prediction of Weather Impacts on Airport Arrival Meter Fix Capacity

This paper introduces a data driven model for predicting airport arrival capacity with a look-ahead time 2-8 hour forecast. The model is suitable for air traffic flow management by explicitly investigating the impact of convective weather on airport arrival meter fix throughput. Estimation of the arrival airport capacity under arrival meter fix flow constraints due to severe weather is an important part of Air Traffic Management (ATM). Airport arrival capacity can be reduced if one or more airport arrival meter fixes are partially or completely blocked by convective weather. When the predicted airport arrival demands exceed the predicted available airport's arrival capacity for a sustained period, Ground Delay Program (GDP) operations will be triggered by ATM system. Serious imbalances between demand and capacity occur most frequently when the airport capacity is severely degraded due to either bad airport terminal surface weather or inclement convective weather around airport arrival fixes. A model that predicts the weather-impacted airport arrival meter fix throughput may help ATM personnel to plan GDP operations more efficiently. This paper identifies the characteristics of air traffic flow across arrival meter fixes at Newark Liberty International Airport (EWR). The proposed approach, based on machine-learning methods, is developed to predict the weather impacted EWR arrival Meter Fix (MF) throughput. Sector forecast coverage is used to envision the weather impact on airport arrival MF flow, and the validation is accomplished by using Convective Weather Avoidance Model (CWAM) 0.5 to 2-hour and Collaborative Convective Forecast Product (CCFP) 4 to 8-hour look-ahead forecast data for the period of April-September in 2014. Furthermore, the regression tree ensemble learning of random forests approach for translating a sector forecast coverage model to an EWR arrival meter fix throughput model is examined. The results suggest that ATM decision makers in charge of MF flow control and GDP planning may benefit from adopting the airport arrival meter capacity prediction models to estimate the inclement weather impacts.

Wang, Yao X.↗
NASA NTRS1976

An investigation of correlation between pilot scanning behavior and workload using stepwise regression analysis

An electro-optical device called an oculometer which tracks a subject's lookpoint as a time function has been used to collect data in a real-time simulation study of instrument landing system (ILS) approaches. The data describing the scanning behavior of a pilot during the instrument approaches have been analyzed by use of a stepwise regression analysis technique. A statistically significant correlation between pilot workload, as indicated by pilot ratings, and scanning behavior has been established. In addition, it was demonstrated that parameters derived from the scanning behavior data can be combined in a mathematical equation to provide a good representation of pilot workload.

Waller, M. C.↗
NASA NTRSDate not supplied

Evaluation of Correction Methods for NASA GeneLab Transcriptomic Datasets

Conducting space biology experiments aboard the International Space Station, particularly those utilizing complex model organisms like mice, is expensive and difficult due to limited crew availability, hardware, and space. As a result, sample numbers from these studies are low, reducing the statistical power of any one experiment. Aggregating spaceflight datasets serves as a method to increase sample numbers, allowing for novel insights through bioinformatic analysis of ‘omics data from merged datasets. However, aggregating datasets can introduce unwanted variation including 1) differences in sample handling, processing, and sequencing platforms between datasets (technical variation) as well as 2) differences in experimental design between datasets such as sex or age of the model organism used. In the present study, NASA GeneLab-hosted RNAseq datasets from rodent liver tissues were used to evaluate several statistical methods to correct for this unwanted variation through two approaches, reference-based and standard. The following correction algorithms were applied with (reference-based) and/or without (standard) considering Universal Mouse RNA Reference samples: ComBat and ComBat_seq from the SVA package, median polish, empirical Bayes, and ANOVA-based algorithms from the MBatch package, and negative binomial regression normalization in the DESeq2 package. For each approach, after the correction algorithm was applied, differential gene expression (DGE) analysis of flight and ground control samples was performed with the combined data. The robustness of each tool was evaluated using BatchQC, to determine statistical differences between datasets before and after correction, Principal Component Analysis, to evaluate global gene expression in samples before and after correction, and by comparing DGE analysis of individual datasets and combined datasets before and after correction. The results showed that the reference-based approach introduced several additional (and likely artificial) DEGs when compared with the standard approach. Thus, the most robust standard correction will be implemented in the GeneLab Visualization 2.0 platform when datasets are combined.

GeneLab, RNA-seq, Batch Correction↗
NASA NTRSDate not supplied

Evaluation of Correction Methods for NASA GeneLab Transcriptomic Datasets

Conducting space biology experiments aboard the International Space Station, particularly those utilizing complex model organisms like mice, is expensive and difficult due to limited crew availability, hardware, and space. As a result, sample numbers from these studies are low, reducing the statistical power of any one experiment. Aggregating spaceflight datasets serves as a method to increase sample numbers, allowing for novel insights through bioinformatic analysis of ‘omics data from merged datasets. However, aggregating datasets can introduce unwanted variation including 1) differences in sample handling, processing, and sequencing platforms between datasets (technical variation) as well as 2) differences in experimental design between datasets. In the present study, NASA GeneLab-hosted RNAseq datasets from mouse liver tissues were used to evaluate several statistical methods to correct for this unwanted variation through two approaches, reference-based and standard. The following correction algorithms were applied with (reference-based) and/or without (standard) considering Universal Mouse RNA Reference samples: ComBat and ComBat_seq from the SVA package, median polish, empirical Bayes, and ANOVA-based algorithms from the MBatch package, and negative binomial regression normalization in the DESeq2 package. For each approach, after the correction algorithm was applied, differential gene expression (DGE) analysis of flight and ground control samples was performed with the combined data. The robustness of each tool was evaluated using BatchQC to determine statistical differences between datasets before and after correction, Principal Component Analysis to evaluate global gene expression in samples before and after correction, and by comparing DGE analysis of individual datasets and combined datasets before and after correction. The results showed that the reference-based approach introduced several additional (and likely artificial) DEGs when compared with the respective standard approach. Of the methods tested, standard ComBat and DESeq2 were identified as the most robust correction methods for combining spaceflight mouse liver RNAseq datasets hosted on GeneLab.

GeneLab↗
NASA NTRSDate not supplied

Combining RNA-SEQ Datasets from NASA GENELAB: An Evaluation of Correction Methods

Background: Conducting space biology experiments aboard the International Space Station, particularly those utilizing complex model organisms like mice, is expensive and difficult due to limited crew availability, hardware, and space. As a result, sample numbers from these studies are low, reducing the statistical power of any one experiment. Aggregating spaceflight datasets serves as a method to increase sample numbers, allowing for novel insights through bioinformatic analysis of ‘omics data from merged datasets. However, aggregating datasets can introduce unwanted variation including 1) differences in sample handling, processing, and sequencing platforms between datasets (technical variation) as well as 2) differences in experimental design between datasets. Methods: In the present study, NASA GeneLab-hosted RNAseq datasets from mouse liver tissues were used to evaluate several statistical methods to correct for this unwanted variation through two approaches, reference-based and standard. The following correction algorithms were applied with (reference-based) and/or without (standard) considering Universal Mouse RNA Reference samples: ComBat and ComBat_seq from the SVA package, the median polish, empirical Bayes, and ANOVA-based algorithms from the MBatch package, and negative binomial regression normalization in the DESeq2 package. For each approach, after the correction algorithm was applied, differential gene expression (DGE) analysis of flight and ground control samples was performed with the combined data. The robustness of each tool was evaluated using BatchQC to determine statistical differences between datasets before and after correction, Principal Component Analysis to evaluate global gene expression in samples before and after correction, and by comparing DGE analysis of individual datasets and combined datasets before and after correction. Results: The results showed that the reference-based approach introduced several additional (and likely artificial) differentially expressed genes when compared with the respective standard approach. Conclusions: Of the methods tested, standard ComBat_seq and DESeq2 were identified as the most robust correction methods for combining spaceflight mouse liver RNAseq datasets hosted on GeneLab.

Finsam Samson↗
NASA NTRS1976

Digital controllers for VTOL aircraft

Using linear-optimal estimation and control techniques, digital-adaptive control laws have been designed for a tandem-rotor helicopter which is equipped for fully automatic flight in terminal area operations. Two distinct discrete-time control laws are designed to interface with velocity-command and attitude-command guidance logic, and each incorporates proportional-integral compensation for non-zero-set-point regulation, as well as reduced-order Kalman filters for sensor blending and noise rejection. Adaptation to flight condition is achieved with a novel gain-scheduling method based on correlation and regression analysis. The linear-optimal design approach is found to be a valuable tool in the development of practical multivariable control laws for vehicles which evidence significant coupling and insufficient natural stability.

Stengel, R. F.↗
NASA NTRS1983

Correlating downward flame spread rates for thick fuel beds

Flame spread rates are presented for polymethylmethacrylate fuel beds as a function of gravitational acceleration and ambient pressure and oxygen concentration. The data are correlated by plotting a dimensionless spread rate that is a measure of the heat transferred forward of the flame, required to sustain the flame, compared to the maximum possible forward heat transfer against a Damkoehler number. The latter parameter indicates the approach of the flame to its maximum temperature, where the maximum possible forward heat transfer occurs, such that the dimensionless spread rate approaches unity at large Damkoehler number. Surface regression effects on the flame spread process are incorporated into the dimensionless spread rate, and the final correlation is independent of bed thickness.

Altenkirch, R. A.↗