Search NASA⌕ Search

SEARCH · Search NASA

Results for “Relative positioning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Demonstration of event position reconstruction based on diffusion in the NEXT-white detector

Noble element time projection chambers are a leading technology for rare event detection in physics, such as for dark matter and neutrinoless double beta decay searches. Time projection chambers typically assign event position in the drift direction using the relative timing of prompt scintillation and delayed charge collection signals, allowing for reconstruction of an absolute position in the drift direction. In this paper, alternate methods for assigning event drift dis tance via quantification of electron diffusion in a pure high pressure xenon gas time projection chamber are explored. Data from the NEXT-White detector demonstrate the ability to achieve good position assignment accuracy for both high and low-energy events. Using point-like energy deposits from 83m Kr calibration electron captures (E ~ 45 keV), the position of origin of low-energy events is determined to 2 cm precision with bias < 1 mm. A convolutional neural network approach is then used to quantify diffusion for longer tracks (E ≥ 1.5 MeV), from radiogenic electrons, yielding a precision of 3 cm on the event barycenter. The precision achieved with these methods indicates the feasibility energy calibrations of better than 1% FWHM at Q ββ in pure xenon, as well as the potential for event fiducialization in large future detectors using an alternate method that does not rely on primary scintillation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Machine Learning Enabled Position Detection for 6.78 MHz UAV Wireless Power Transfer System

This paper presents a novel supervised machine learning (SML) approach for accurate position detection of the receiver coil in wireless power transfer (WPT) systems using only secondary-side electrical measurements, with applications in autonomous unmanned aerial vehicle (UAV) charging. The proposed method trains a supervised learning model to map measured secondary-side voltage and current features to the receiver’s spatial position with high precision. This enables an autonomous UAV to determine its location relative to the primary coil center, the optimal position for maximizing wireless charging efficiency. The sensing method is fully integrated into a standard WPT system, utilizing the same primary and secondary coils for both power transfer and position detection, thereby eliminating additional sensing hardware. The use of a 6.78 MHz operating frequency enhances positional sensitivity, as high-frequency near-field electromagnetic fields respond strongly to small spatial variations. Experimental validation is performed on a 30 W scaled prototype featuring a 210 mm × 140 mm primary coil, a 50 mm × 80 mm receiver coil, and a 15 mm air gap. Results demonstrate reliable position estimation and a strong correlation between predicted position and optimal coil alignment. This integrated framework unifying position detection and wireless charging offers a promising foundation for future autonomous electric vertical takeoff and landing (eVTOL) systems, enabling compact, hardware-efficient, and high-accuracy charging solutions.

Colak, Kerim [New York University]↗

Decoding Antenna Behavior in Metal—Organic Frameworks

Metal–organic frameworks (MOFs) define a solid-state platform for developing artificial photosystems. Efficient anisotropic exciton migrations in these frameworks entail “antenna behavior” that can power up the distal interior reaction centers (RC), driving charge separation between donor-acceptor pairs. Reminiscent of the natural light-harvesting complex, such processes can achieve high quantum yield by exploiting the vast interior surface of the porous crystallites. It is important to understand the optimum positioning of the RC site relative to the anisotropic exciton migration path within these frameworks. The efficiency of such antenna behavior is probed here through Stern–Volmer (SV) type analysis with a series of node-anchored redox quenchers, ferrocene-carboxylate, ferrocene acetate, and dinitrobenzoate. Decoding various intrinsic processes, this work constructs a revised SV formalism in solid assembly that hosts ultrafast anisotropic exciton migration to account for the intrinsic exciton hopping rate from the extrinsic electron transfer rate, and the dimension of effective quenching. In conclusion, this transformative understanding can be applied to other relevant solid-state assemblies.

Saha, Bapan [Southern Illinois University, Carbond↗

Symmetry Breaking Induced by Chiral Phosphonic Acids in a 2D Tin-Halide Perovskite

The ability to induce and modulate chirality in metal halide perovskite semiconductors (MHPs) using chiral additives expands the compositional design space and offers a means of tuning chiroptical properties. Motivated by the ability of phosphonic acids to interact with metal ions, we designed three chiral phosphonic acids (CPAs) to impose chirality in otherwise achiral 2D MHP, phenylammonium tin iodide (PA 2 SnI 4 ). We found that both the position of the phosphonic acid relative to the bond between the two naphthalene rings (i.e., the chiral axis) and the distance between the phosphonic acid and the binaphthyl chiral units significantly impact the transfer of structural chirality into the MHP lattice. The compound with a phosphonic acid directly bound to one of the naphthalene rings at the carbon adjacent to the chiral axis resulted in the largest circular dichroism dissymmetry factor of the three phosphonic acids. Furthermore, optical pump-terahertz probe measurements reveal an increase in the charge carrier mobility in the MHPs following the addition of CPAs. This dual functionality of CPAs in inducing chirality and improving charge transport properties in MHPs is promising for chiral-optoelectronic applications.

14 SOLAR ENERGY↗

Determining tolerance requirements for spray-duct alignment in ducted fuel injection

Several ducted fuel injection (DFI) studies have highlighted the importance of accuracy in aligning the duct axis with that of its corresponding spray for optimal effectiveness, as misalignment adversely impacts the method’s performance. The need for accurate alignment could lead to added manufacturing complexity via tighter tolerances. This study systematically explores cases of horizontal, vertical, and rotational misalignment, analyzing their respective effects on DFI performance. Vertical and horizontal misalignments at the duct inlet plane were varied at magnitudes of 6.25%, 12.5%, and 25.0% of the duct diameter, corresponding to 0.125, 0.25, and 0.5 mm, respectively. Rotational misalignments were set at 1°, 2°, and 4°, corresponding to 3.65%, 7.30%, and 14.6%, respectively, of the duct diameter at its inlet plane. The investigation yields spray-duct alignment tolerance limits and highlights the influence of misalignment direction on emissions due to the interactions with swirl and squish inside the combustion chamber. The results indicate that the tolerance limits for the alignment are within 4° and 0.5 mm relative to the geometrically aligned position. If the misalignment exceeds 4°of rotation or 0.5 mm in the horizontal direction, the beneficial effects on soot reduction using this method are no longer observed. The findings contribute to an understanding that can be used to optimize DFI for cleaner and more efficient combustion in compression-ignition engines.

Şener, Ramazan↗

Eroding Permafrost Coastlines Release Biodegradable Dissolved Organic Carbon to the Arctic Ocean

Coastal erosion mobilizes large quantities of organic matter (OM) to the Arctic Ocean where it may fuel greenhouse gas emissions and marine production. While the biodegradability of permafrost-derived dissolved organic carbon (DOC) has been extensively studied in inland soils and freshwaters, few studies have examined dissolved OM (DOM) leached from eroding coastal permafrost in seawater. To address this knowledge gap, we sampled three horizons from bluff exposures near Drew Point, Alaska: seasonally thawed active layer soils, permafrost containing Holocene terrestrial and/or lacustrine OM, and permafrost containing late-Pleistocene marine-derived OM. Samples were leached in seawater to compare DOC yields, DOM composition (chromophoric DOM, Fourier transform ion cyclotron resonance mass spectrometry), and biodegradable DOC (BDOC). Holocene terrestrial permafrost leached the most DOC compared to active layer soils and Pleistocene marine permafrost. However, DOC from Pleistocene marine permafrost was the most biodegradable (33 ± 6% over 90 days), followed by DOC from active layer soils (23 ± 5%) and Holocene terrestrial permafrost (14 ± 3%). Permafrost leachates contained relatively more aliphatic and peptide-like formulae, whereas active layer leachates contained relatively more aromatic formulae. BDOC was positively correlated with nitrogen-containing and aliphatic formulae, and negatively correlated with polyphenolic and condensed aromatic formulae. Using estimates of eroding OM, we scale our results to estimate DOC and BDOC inputs to the Alaska Beaufort Sea. While DOC inputs from coastal erosion are relatively small compared to rivers, our results suggest that erosion may be an important source of BDOC to the Beaufort Sea when river inputs are low.

Bristol, Emily M.↗

Hyper Spectral Anomaly Detection

Anomaly detection is a common machine learning (ML) task with growing importance in the fields of imaging, quality assurance, and multiple security related disciplines. Anomaly detection is more difficult than traditional machine learning methods due to the inherent unlabeled nature of the datasets. Existing anomaly detection architectures commonly face challenges with explainability, retaining information related to the relational structure of the data, and false positive rates. Hyperspectral Imaging Anomaly Detection (HSI) is a statistical model that employs vertex and edge weighted graphs to preserve the data’s relationships on different topographical scales. The model is able to generalize from anomaly detection in 2D images to novel datasets related to cyber-security. Furthermore, the use of multi-spectral and other filtering methods results in fewer false positives and increases the explainability of model predictions. When applying HSI to cyber-security datasets, we are able to successfully detect malicious activity with a relatively high degree of accuracy.

97 - MATHEMATICS AND COMPUTING↗

Swarm path planner system for vehicles

A system for determining optimal paths without collision through a travel volume for a swarm of vehicles is disclosed. The system determines a travel path for the swarm leader vehicle using a minimal cost path derived from various measures of environmental cost for avoiding objects in traveling from leader location to target location. The system also determines, for each empty neighbor location of each follower vehicle, relational costs for follower vehicle travel relative to leader vehicle travel. The various measures of relational cost seek to maintain a prescribed positional relationship between each follower vehicle and the leader vehicle given the leader vehicle travel path. Based on various measures of environmental and relational cost, the system determines the best travel path for the each follower vehicle relative to the leader vehicle.

Paglieroni, David W.↗

Data for Spatial Analysis of Cell Patterning to Aid Genetic and Phenotypic Understanding of Grass Stomatal Density: A Case Study in Maize

Biological processes involve complex hierarchies where composite traits result from multiple component traits. However, holistically understanding of how sets of component traits interact to underpin genotype-to-phenotype relationships is generally lacking. Stomatal density (SD) is a tractable model system for exploring how high-throughput phenotyping (HTP) data could be exploited by a new spatial analysis approach to better understand a developmentally and functionally important trait. SD is a composite trait, resulting from various components related to cell identity and size, which are themselves governed by a series of spatio-developmental processes. Data from 192 recombinant inbred lines of maize [Zea mays (L.)] were analyzed by a new stomatal patterning phenotype (SPP) to (1) describe the average spatial probability distribution of the nearest neighboring stomata; (2) derive a core set of component traits related to cell size, cell packing, and positional probabilities; (3) build a structural equation model of component traits underlying SD; and (4) identify stomatal patterning quantitative trait loci (QTL). The core set of SPP-derived traits explained 74% of the variation in SD. Analyzing SPP component traits allowed some loci previously identified as generic SD QTL to be recognized as specific to lateral versus longitudinal elements of stomatal patterning. Therefore, this study highlights how novel insights can be gained by decomposing a composite trait (e.g., SD) into a set of component traits that were present in HTP data but not previously exploited.

AI/ML↗

Quantifying the impacts of atmospheric rivers on the surface energy budget of the Arctic based on reanalysis

We present a comprehensive analysis of Arctic surface energy budget (SEB) components during atmospheric river (AR) events identified by integrated water vapor transport exceeding the monthly 85th-percentile climatological threshold in 3-hourly ERA5 reanalysis data from January 1980 to December 2019. Analysis of average anomalies in SEB components, net SEB, and the overall AR contribution to both the seasonal SEB components and net SEB climatology reveals clear seasonality and distinct land–sea–sea ice contrast patterns. Over the sea-ice-covered central Arctic Ocean, ARs significantly impact net SEB, inducing substantial surface warming in fall, winter, and spring. This warming is primarily driven by large anomalies in surface downward longwave radiation (LWD), which average 29–45 W m −2 during the cold seasons. In contrast, AR-related LWD anomalies are smaller in summer, averaging around 15 W m −2 , indicating a reduced impact during this season. Over sub-polar oceans, ARs have the most substantial positive impact on net SEB in cold seasons, mainly attributed to significant positive turbulent heat flux anomalies. AR-related turbulent heat anomalies reduce the upward turbulent flux, contributing up to −11 % relative to its seasonal climatology. In summer, ARs induce negative impacts on net SEB, primarily due to reduced shortwave radiation from increased cloud cover during AR events. Over continents, ARs generate smaller absolute impacts on net SEB because the large LWD anomalies are largely offset by corresponding increases in upward longwave radiation, particularly during cold seasons. Additionally, the seemingly large relative contributions of ARs to the net SEB over land primarily reflects the small magnitude of the climatological net SEB over continents. Greenland, especially western Greenland, exhibits significant downward longwave radiation anomalies associated with ARs, which drive large net SEB anomalies and contribute >54 % to mean SEB and induce amplified surface warming year-round. This holds significance for melt events, particularly during summer. Additionally, results of AR-related SEB impacts strongly depend on detection methods, as restrictive AR detection algorithms that emphasize extreme AR events, with large AR-related anomalies, do not necessarily indicate a large overall contribution to the SEB climatology due to the low occurrence frequency of these events. This study quantifies the role of ARs in the surface energy budget, contributing to our understanding of the Arctic warming and sea ice decline in ongoing Arctic amplification.

Arctic Sea ice change↗

Electron-Deficient Phenazines: Synthesis, Structures, Redox, and Optoelectronic Properties in the Gas Phase, in Solution, and in the Solid State

High-temperature gas-phase reactions of 1,4-C4F8I2 with phenazine (PHNZ) afforded new thermally- and air-stable derivatives with cyclo-C4F8 substituents, viz. 1,2-PHNZ(C4F8), 2,3-PHNZ(C4F8), 1,2:6,7-PHNZ(C4F8)2, 1,2:7,8-PHNZ(C4F8)2, and 1,2:8,9-PHNZ(C4F8)2. Reactions in the presence of Cu powder resulted in reductive-defluorination/aromatization of some of the cyclo-C4F8 substituents to produce 2,3-PHNZ(C4F4), 2,3-PHNZ(C4HF3), and 1,2:6,7-PHNZ(C4F8)(C4F4), which are formally tri- or tetrafluoro derivatives of benzo[a]phenazine. Single-crystal X-ray diffraction structures of these compounds demonstrate the planarity of 2,3-PHNZ(C4F4) and 2,3-PHNZ(C4HF3) and ordered p-stacking in 1,2-PHNZ(C4HF3), 1,2-PHNZ(C4F4), 1,2-PHNZ(C4F8), and 2,3-PHNZ(C4F8). Low-temperature gas-phase photoelectron spectra of the PHNZ(C4F8)1,2 compounds show that they are strong electron acceptors, with the three PHNZ(C4F8)2 isomers having electron affinities exceeding that of C60. Cyclic voltammetry in acetonitrile show that the five PHNZ(C4F8)1,2 compounds exhibit reversible one-electron reductions with large positive shifts in their reduction potentials relative to unsubstituted PHNZ. Spectroelectrochemical absorption and EPR spectra of PHNZ(C4F8)1,2- • anion radicals and extensive DFT calculations revealed the significant role that the different substitution patterns have on determining the optoelectronic properties of the PHNZ(C4F8)1,2 derivatives and PHNZ(C4F8)1,2- • anion radicals. Time-resolved microwave conductivity measurements and photoluminescence spectra of blends of the PHNZ(C4F8)1,2 derivatives with the donor poly(3-hexylthiophene) (P3HT) were recorded to assess the possible use of the new compounds in optoelectronic devices.

Balser, Sebastian↗

Waiting for inflation: A new initial state for the Universe

We propose a cosmological lingering phase for the initial state prior to inflation which would help address the singularity problem of inflation. The Universe begins with a constant (Hagedorn) temperature and then transitions into an inflationary universe while preserving the null energy condition (NEC). We first consider the phase space of positive spatial curvature models within general relativity and with matter sources that respect the NEC. Depending on the duration of the postlingering inflation, these models can produce a small amount of observable spatial curvature in the cosmic microwave background. We also discuss how lingering can arise with or without spatial curvature in theories of quantum gravity when considering the thermodynamic scaling of particles and its impact on the early Universe. The string theory dilaton is essential to the dynamics. There are many open questions that remain. Published by the American Physical Society 2024

Melcher, Brandon (ORCID:0000000280849682)↗

The Interaction Between Climate Forcing and Feedbacks

A Perturbed Parameter Ensemble (PPE) with the Community Atmosphere Model version 6 (CAM6) is used to better understand the sensitivity of aerosol forcing and cloud feedbacks to changes in model processes. Aerosol forcing through aerosol-cloud interactions is mostly negative (a cooling) due to shortwave radiation, while feedbacks are positive or negative in different regions due to contrasting longwave and shortwave effects. Both forcing and feedbacks are related to the mean climate state. Higher magnitude cloud radiative effects generally mean larger magnitude net negative forcing and larger magnitude net positive feedback. Aerosol forcing is broadly related to the susceptibility of clouds to drop number. Feedbacks also related to susceptibility, but to a lesser extent and in different regions to aerosol forcing. Aerosol forcing and cloud feedbacks are anti-correlated in the CAM6 PPE such that stronger negative forcing is associated with stronger positive feedbacks. Even the processes governing forcing and feedback sensitivity in the PPE are similar. These include the warm rain formation process, ice loss processes and deep convective intensity.

54 ENVIRONMENTAL SCIENCES↗

SPRUCE Soil Volumetric Water Content in Experimental Plots, Marcell Experimental Forest, Minnesota, 2017-2025

This dataset contains soil volumetric water content (VWC) measurements from the Spruce and Peatland Responses Under Changing Environments (SPRUCE) Experiment. Measurements were made inside SPRUCE experimental plots in the S1 Bog at the US Forest Service Marcell Experimental Forest in northern Minnesota, USA from 2018-2025 (2018-06-14 to 2025-12-31). Observations were made with METER 10HS soil moisture sensors. To reduce bulk density related variability, 10HS sensors were placed inside mesh tubes filled with peat at a standard bulk density. The observations under standard bulk density represent relative differences in water content between hummock and hollow positions, and in response to experimental treatments. Productivity of peatlands, and their keystone species sphagnum, are highly dependent on water availability, which is affected by lateral inputs, precipitation, ground water depth and evapotranspiration. Knowledge of near surface and sphagnum water content is useful to understand peatland function. This dataset contains 8 data files in comma-separate values (.csv) format. Additional metadata are provided: one data dictionary and a file-level metadata file in comma-separate values (*.csv) format and a user guide in PDF (*.pdf) format.

Warren, Jeffrey [ORNL] (ORCID:0000000206804697)↗

Spatial analysis of cell patterning to aid genetic and phenotypic understanding of grass stomatal density: A case study in maize

Biological processes involve complex hierarchies where composite traits result from multiple component traits. However, holistically understanding of how sets of component traits interact to underpin genotype-to-phenotype relationships is generally lacking. Stomatal density (SD) is a tractable model system for exploring how high-throughput phenotyping (HTP) data could be exploited by a new spatial analysis approach to better understand a developmentally and functionally important trait. SD is a composite trait, resulting from various components related to cell identity and size, which are themselves governed by a series of spatio-developmental processes. Data from 192 recombinant inbred lines of maize [Zea mays (L.)] were analyzed by a new stomatal patterning phenotype (SPP) to (1) describe the average spatial probability distribution of the nearest neighboring stomata; (2) derive a core set of component traits related to cell size, cell packing, and positional probabilities; (3) build a structural equation model of component traits underlying SD; and (4) identify stomatal patterning quantitative trait loci (QTL). The core set of SPP-derived traits explained 74% of the variation in SD. Analyzing SPP component traits allowed some loci previously identified as generic SD QTL to be recognized as specific to lateral versus longitudinal elements of stomatal patterning. Therefore, this study highlights how novel insights can be gained by decomposing a composite trait (e.g., SD) into a set of component traits that were present in HTP data but not previously exploited.

59 BASIC BIOLOGICAL SCIENCES↗

Vascular endothelial growth factor receptor-1 (FLT1) interactions with amyloid-beta in Alzheimer’s disease: A putative biomarker of amyloid-induced vascular damage

We have identified FLT1 as a protein that changes during Alzheimer's disease (AD) whereby higher brain protein levels are associated with more amyloid, more tau, and faster longitudinal cognitive decline. Given FLT1's role in angiogenesis and immune activation, we hypothesized that FLT1 is upregulated in response to amyloid pathology, driving a vascular-immune cascade resulting in neurodegeneration and cognitive decline. We sought to determine (1) if in vivo FLT1 levels (CSF and plasma) associate with biomarkers of AD neuropathology or differ between diagnostic staging in an aged cohort enriched for early disease, and (2) whether FLT1 expression interacts with amyloid on downstream outcomes, such as phosphorylated tau levels and cognitive performance. Additionally, we sought to replicate FLT1 interactions in the brain. The results showed that higher levels of FLT1 in CSF and post-mortem brain tissue related to increased tau, particularly among amyloid positive individuals. These analyses help clarify the potential utility of FLT1 as a biomarker among individuals with evidence of brain amyloidosis.

60 APPLIED LIFE SCIENCES↗

First multi-institutional systematic comparison of the neutron ambient dose equivalent produced by proton therapy systems

Objective. Isochronous cyclotrons, synchrocyclotrons, and synchrotrons are used to accelerate protons for proton therapy. An accurate measurement of neutron doses generated by these accelerators and associated delivery systems and its clinical relevance requires systematic protocols and proper neutron dosimetry for a meaningful assessment. We present the first comprehensive comparison of neutron ambient dose equivalent (H*(10)) produced by clinically operational proton therapy systems. Approach. Treatment plans with 10 cm modulation-depth and ranges of 10 cm (R10M10) and 25 cm (R25M10) were created to cover a 10 × 10 × 10 cm 3 water target. The pencil beam scanning proton therapy machines studied were: two gantry-mounted synchrocyclotrons (Hyperscan, Mevion, half-gantry), two isochronous cyclotrons (ProBeam, Varian, full-gantry), one isochronous cyclotron (Proteus, IBA, full-gantry), and two synchrotrons (PROBEAT, Hitachi, full- and half-gantry). Proton beams were delivered to 30 × 30 × 40 cm 3 plastic water phantoms. WENDI-II and LUPIN-BF3-NP neutron rem-meters were positioned at three angles (0°, 45°, 90°) relative to the beam direction to measure the neutron H*(10) at distances between 50–300 cm from the isocenter. Main results. H*(10) showed dependence on beam energy, machine type, and measurement location. The highest reading was for the gantry-mounted synchrocyclotron, whereas other systems produced approximately comparable neutron doses. In all cases, the H*(10) reduced with distance from the isocenter. The H*(10) drop at 2 m distance compared to that at 0.5 m was a factor of ∼5 for the gantry-mounted synchrocyclotron whereas in other systems the decrease was a factor of 10. The WENDI-II device suffered from dead-time-associated under-estimation of the dose by a factor of ∼2–3 under the synchrocyclotron beam due to its high dose-per-pulse. However, WENDI-II and LUPIN-BF3-NP results were within reasonable agreement in isochronous cyclotron and synchrotron beams, indicating that both devices are suitable for those systems. Significance. Neutron H*(10) is dependent on various parameters including beam energy, measurement location, as well as machine design. Caution must be exercised in choosing the appropriate neutron-dose-measurement device to be used for low-duty-factor, particularly in high-instantaneous-rate proton delivery systems. By delivering the same volumetric proton dose across different machines, this work provides a benchmark for inter-system comparisons and serves as a foundation for future studies.

LUPIN↗

Cerebellar dysfunction in a mouse model of childhood-onset manganese-induced dystonia parkinsonism

Humans with pathogenic variants of the manganese (Mn) transporter gene SLC39A14 exhibit highly elevated brain Mn concentrations and childhood-onset dystonia-parkinsonism. Here we show that Slc39a14-knockout (KO) mice, a preclinical model of the disease with elevated Mn concentrations in the CB, express deficits in physiological tremor implicating cerebellar (CB) dysfunction. Imaging of intracellular Mn in Purkinje cells (PCs) using synchrotron-based X-ray fluorescence microscopy confirmed highly elevated Mn concentrations in the PCs of Slc39a14-KO mice. To determine biological pathways altered in the CB of Slc39a14-KO mice relative to wildtype (WT), we performed RNA sequencing and discovered significant upregulation of pathways and genes regulating immune response and cell death. To substantiate these findings, we performed quantitative autoradiography of the neuroinflammation biomarker Translocator Protein 18 kDa (TSPO) which was significantly increased in the CB of Slc39a14-KO mice relative to WT. The latter findings were confirmed via immunostaining with the microglial marker Iba-1, revealing widespread microglia activation and clustering in the CB cortex. Immunostaining for cleaved caspase-3 (cCASP3), a marker of apoptosis, showed increased number of PCs with positive immunolabeling for cCASP3 in Slc39a14-KO mice relative to WT. Degeneration of PCs was confirmed by Hematoxylin and Eosin (H&E) staining. Lastly, functional electrophysiological assessment of CB neurocircuitry revealed a marked decrease in firing rates of cerebellar nuclei (CN) neurons and increased variability of PC simple spikes firing. Collectively, these findings show, for the first time, Mn-induced PC degeneration and dysfunctional CB circuitry in Slc39a14-KO mice providing additional evidence for the pathological underpinnings of the dystonia-like movements, balance, and gait abnormalities in SLC39A14 mutation carriers.

36 MATERIALS SCIENCE↗