Search NASA⌕ Search

SEARCH · Search NASA

Results for “Remote-sensing observations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Satellite-Sensor Calibration Verification Using the Cloud-Shadow Method

An atmospheric-correction method which uses cloud-shaded pixels together with pixels in a neighboring region of similar optical properties is described. This cloud-shadow method uses the difference between the total radiance values observed at the sensor for these two regions, thus removing the nearly identical atmospheric radiance contributions to the two signals (e.g. path radiance and Fresnel-reflected skylight). What remains is largely due to solar photons backscattered from beneath the sea to dominate the residual signal. Normalization by the direct solar irradiance reaching the sea surface and correction for some second-order effects provides the remote-sensing reflectance of the ocean at the location of the neighbor region, providing a known 'ground target' spectrum for use in testing the calibration of the sensor. A similar approach may be useful for land targets if horizontal homogeneity of scene reflectance exists about the shadow. Monte Carlo calculations have been used to correct for adjacency effects and to estimate the differences in the skylight reaching the shadowed and neighbor pixels.

Reinersman, P.↗

Large scale motions of Neptune's bow shock: Evidence for control of the shock position by the rotation phase of Neptune's magnetic field

The Voyager 2 spacecraft observed high levels of Langmuir waves before the inbound crossing of Neptune's bow shock, thereby signifying magnetic connection of the bow shock. The Langmuir waves occurred in multiple bursts throughout two distinct periods separated by an 85 minute absence of wave activity. The times of onsets, peaks, and disappearances of the waves were used together with the magnetic field directions and spacecraft position, to perform a 'remote-sensing' analysis of the shape and location of Neptune's bow shock prior to the inbound bow shock crossing. The bow shock is assumed to have a parabolidal shape with a nose location and flaring parameter determined independently for each wave event. The remote-sensing analysis give a shock position consistent with the time of the inbound shock crossing. The flaring parameter of the shock remains approximately constant throughout each period of wave activity but differs by a factor of 10 between the two periods. The absence of waves between two periods of wave activity coincides with a large rotation of the magnetic field and a large increase in the solar wind ram pressure' both these effects lead to magnetic disconnection of the spacecraft from shock. The planetwards motion of the shock's nose from 38.5 R(sub N) to 34.5 R(sub N) during the second time period occurred while the solar wind ram pressure remained constant to within 15 percent. This second period of planetwards motion of the shock is therefore strong evidence for Neptune's bow shock moving in response to the rotation of Neptune's oblique, tilted magnetic dipole. Normalizing the ram pressure, the remotely-sensed shock moves sunwards during the first wave period and planetwards in the second wave period. The maximum standoff distance occurs while the dipole axis is close to being perpendicular to the Sun-Neptune direction. The remote-sensing analysis provides strong evidence that the location of Neptune's bow shock is controlled by Neptune's rotation phase.

Cairns, Iver H.↗

A quad-pol radar scattering model for use in remote sensing of lava flow morphology

Mapping of spatial variations in surface roughness over large regions is required to understand the nature of volcanic terrains. An invertible scattering model for quad-polarization radar data is presented to assist in the remote-sensing analysis of lava flow surface morphology. This model permits separation of the polarized part of the radar echo into quasispecular, dihedral, and small-perturbation scatterin components, based on an assumed surface dielectric constant. Tests are presented for a quad-pol scene of Craters of the Moon National Monument in Idaho, where there are a number of basaltic lava flows of differing surface morphology. Comparison of calculated model components with the observed morphology of the lava flows suggests that this technique may be useful for the remote description of changes in surface roughness. The scattering mechanisms chosen to represent the polarizing behavior of the real surface display correlations which indicate that they are sensitive to the expected scales of roughness.

Campbell, Bruce A.↗

Alaska SAR processor implementation of E-ERS-1

The synthetic aperture radar (SAR) data processing algorithm used by the Alaska SAR Facility (ASF) for the European Space Agency's first Remote-Sensing Satellite (E-ERS-1) SAR data are examined. Preprocessing highlights two features: signal measurement, which includes signal-to-noise ratio, replica measurement, and noise measurement; and Doppler measurement, which includes clutter lock and autofocus. The custom pipeline architecture performs the main processing with controls at the input interface, range correlator, corner-turn memory, azimuth correlator, and multi-look memory. The control software employs a flexible control scheme. The Committee on Earth Observation Satellites (CEOS) format encapsulates the ASF products. System performance for SAR image processing of E-ERS-1 data is reviewed.

Cuddy, David↗

Contribution of space platforms to a ground and airborne remote-sensing programme over active Italian volcanoes

ERTS-1 imagery of the volcanic areas of southern Italy was used primarily for the evaluation of space platform capabilties in the domains of regional geology, soil and rock-type classification and, more generally, to study the environment of active volcanoes. The test sites were selected and equipped primarily to monitor thermal emission, but ground truth data was also collected in other domains (reflectance of rocks, soils and vegetation). The test areas were overflown with a two channel thermal scanner, while a thermo camera was used on the ground to monitor the hot spots. The primary goal of this survey was to plot the changes in thermal emission with time in the framework of a research program for the surveillance of active volcanoes. However, another task was an evaluation of emissivity changes by comparing the outputs of the two thermal channels. These results were compared with the reflectance changes observed on multispectral ERTS-1 imagery.

Cassinis, R.↗

Bunte Breccia of the Ries - Continuous deposits of large impact craters

The 26-km-diameter Ries impact crater in south Germany and the mechanism of ejection and emplacement associated with its formation about 15 Myr ago are discussed in detail, and the implications of the findings for models of crater formation on earth, moon, and planets are considered. Field observations and laboratory tests on 560-m core materials from nine locations are reported. The continuous deposits (Bunte Breccia) are found to be a chaotic mixture resulting from deposition at ambient temperatures in a highly turbulent environment, probably in the ballistic scenario proposed by Oberbeck et al. (1975), with an emplacement time of only about 5 min. Further impact parameters are estimated using the 'Z model' of Maxwell (1977): initial radius = 6.5 km, excavation depth = 1650 m, excavation volume = 136 cu km, and transient cavity volume = 230 cu km. The interpretation of lunar and planetary remote-sensing and in situ evidence from impact craters is reviewed in the light of the Ries findings. Numerous photographs, maps, diagrams, and tables illustrate the investigation.

Horz, F.↗

Ocean-ice interaction in the marginal ice zone using synthetic aperture radar imagery

Ocean-ice interaction processes in the marginal ice zone (MIZ) by wind, waves, and mesoscale features, such as up/downwelling and eddies are studied using Earth Remote-Sensing Satellite (ERS) 1 synthetic aperture radar (SAR) images and an ocean-ice interaction model. A sequence of seven SAR images of the MIZ in the Chukchi Sea with 3 or 6 days interval are investigated for ice edge advance/retreat. Simultaneous current measurements from the northeast Chukchi Sea, as well as the Barrow wind record, are used to interpret the MIZ dynamics. SAR spectra of waves in ice and ocean waves in the Bering and Chukchi Sea are compared for the study of wave propagation and dominant SAR imaging mechanism. By using the SAR-observed ice edge configuration and wind and wave field in the Chukchi Sea as inputs, a numerical simulation has been performed with the ocean-ice interaction model. After 3 days of wind and wave forcing the resulting ice edge configuration, eddy formation, and flow velocity field are shown to be consistent with SAR observations.

Liu, Antony K.↗

LIMEX '87 ice surface characteristics - Implications for C-band SAR backscatter signatures

Ice surface characterization data collected in 1987, during the Labrador Sea Ice Margin Experiment, are analyzed to estimate the changes in snow and ice properties at the onset of melt. Surface measurements were made from an ice research vessel on several days (some of which had coincident remote-sensing flights) at a number of locations in the marginal ice zone. These data are used as input parameters in a simple scattering model to simulate the effects of variations in material properties upon C-band scattering signatures. Snow moisture and large-scale surface roughness are demonstrated to have the largest effect upon HH polarization scattering cross-section sigma(HH)(O) and large differences are predicted between undeformed floe surfaces and deformed or undulating rough ice surfaces. Using a parametric approach, an approximate picture of rough and smooth ice signatures and their relative contrast are provided. The models reproduce a trend observed in synthetic aperture radar (SAR) images of increasing backscatter contrast between deformed and underformed ice over an early period of warning: such observations are consistent with the results of analysis of SAR images to date. The model also reproduces a calibrated SAR-derived signature with a reasonable degree of accuracy.

Drinkwater, Mark R.↗

Mars surface properties observed by earth-based radar at 70-, 12.5-, and 3.8-cm wavelengths

In the present paper, the results are summarized of a study aimed at determining the small-scale surface properties of Mars (for the Viking project) from a thorough review of all available Martian radar data for the 1973 opposition. Analysis of the quasi-specular echo component showed changes in apparent reflectivity of at least 5 to 1. If attributed entirely to variations in surface material, these correspond to dielectric constants between 1.6 and 4.0. Values of rms surface slope on 1- to 100-m scales range from as low as 0.5 degrees in tablelands near Valles Marineris to more than 3.0 degrees in certain other areas. There is a weak correlation between the small-scale surface characteristics inferred from radar and those inferred from Mariner 9 images and other remote-sensing data sets.

Simpson, R. A.↗

Molecular shifts in dissolved organic matter along a burn severity continuum for common land cover types in the Pacific Northwest, USA

Increasing wildfire severity is of growing concern in the western United States, with consequences for the production, composition, and mobilization of dissolved organic matter (DOM) from terrestrial to aquatic systems. Our current understanding of wildfire impacted DOM (often termed pyrogenic DOM) composition is largely built from temperature-based studies that can be difficult to extrapolate to field conditions, which are often defined by ‘burn severity’, or the post-wildfire impact observed at a site. Thus, burn severity can encapsulate a broader range of fire and environmental conditions not exclusive to temperature. Biogeochemical studies that describe DOM along burn severity continuums remain limited but are needed to better link DOM composition with field conditions post-fire. Here, in this study, we addressed this need with an experimental open air burn simulation that generated chars from vegetation representative of major land cover types in the western United States. The chars were leached to simulate DOM mobilization potential. The DOM composition was characterized by ultra-high resolution mass spectrometry (HR-MS) and UV/VIS absorbance and fluorescence. Our results indicated that the shifts of DOM production and composition along a burn-severity gradient depends on the land cover type that was burned, with the degree of change dependent on the composition of the starting parent vegetation material. Fluorescence signatures indicated a strong convergence across land cover types to more aromatic DOM with increasing severity, while HR-MS indicated an increase in the production of aromatic nitrogen containing DOM with increasing severity. Results from this study enhance our ability to describe DOM composition in a framework that can be more directly related with field and remote-sensing based metrics.

54 ENVIRONMENTAL SCIENCES↗

Structural and stratigraphic features and ERS 1 synthetic aperture radar backscatter characteristics of ice growing on shallow lakes in NW Alaska, winter 1991-1992

Changes in Earth Remote-Sensing Satellite (ERS) 1 C band synthetic aperture radar (SAR) backscatter intensity (sigma(exp 0)) from ice growing on shallow tundra lakes at three locations in NW Alaska are described. Ice core analysis shows that all lakes on the coast at Barrow the ice, whether floating or frozen to the bottom, includes an inclusion-free layer overlying a layer of ice with tubular bubbles oriented parallel to the direction of growth. The clear ice may also be overlain by a discontinuous layer of bubbly snow ice. Backscatter is low (-16 to -22 dB) at the time of initial ice formation, probably due to the specular nature of the upper and lower ice surfaces causing the radar pulse to be reflected away from the radar. As the ice thickens during the autumn, backscatter rises steadily. Once the ice freezes to the lake bottom, regardless of the presence of foward scattering tubular bubbles, low backscatter values of -17 to -18 dB are caused by absorption of the radar signal in the lake bed. For ice that remains afloat all winter the ice-water interface and the tubular bubbles combine, presumably via an incoherent double-bounce mechanism, to cause maximum backscatter values of the order of -6 to -7 dB. The sigma(exp 0) saturates at -6 to -7 dB before maximum ice thickness and tubular bubble content are attained. A simple ice growth model suggests that the layer of ice with tubular bubbles need be only a few centimeters thick midway through the growth season to cause maximum backscatter from floating ice. During the spring thaw a previously unreported backscatter reversal is observed on the floating and grounded portions of the coastal lakes but not on the lakes farther inland. This reversal may be related to the ice surface topography and wetness plus the effects of a longer, cooler melt period by the coast. Time series of backscatter variations from shallow tundra lakes are a record of (1) the development of tubular bubbles in the ice and, by association, changes in the gas content of the underlying water and (2) the freezing of ice to the bottoms of the lakes and therefore lake bathymetry and water availability. SAR is also able to detect the onset of lake ice growth in autumn and the initiation of the spring thaw and thus has potential for monitoring high-altitude lake ice growth and decay processes in relation to climate variability.

Jeffries, M. O.↗

Remote-sensing studies of hydrologic environments in the lower Raritan River System, New Jersey

A series of remote sensing experiments were conducted in January and November 1968. The airborne multisensor missions included photographic and thermal-infrared sensors operated over a single site at a time when streamflow and water temperature observations were being made on the ground. Remote sensing data show: (1) effect of thermal waste water discharges on stream temperatures, (2) cross-channel variations in thermal characteristics due to waste water discharge, channel characteristics, and tidal currents, (3) influence of flow rates on dispersion, (4) patterns and distribution of ice cover, and (5) movement of sediment loads.

Anderson, P. W.↗

Feasibility study ASCS remote sensing/compliance determination system

A short-term technical study was performed by the MSC Earth Observations Division to determine the feasibility of the proposed Agricultural Stabilization and Conservation Service Automatic Remote Sensing/Compliance Determination System. For the study, the term automatic was interpreted as applying to an automated remote-sensing system that includes data acquisition, processing, and management.

Duggan, I. E.↗

Applications of remote-sensing data in Alaska

Public and private agencies were introduced to the use of remotely sensed data obtained by both satellite and aircraft, and benefitted from facilities for data processing enhancement and interpretation as well as from the institute's data library. Cooperative ventures involving the performance of operational activities included assistance to the Bureau of Land Management in the suppression of wildfires; the selection of sites for power line right-of-way; the mapping of leads in sea ice; determination of portions of public lands to be allocated for small scale farming; the identification of areas for large scale farming of barley; the observation of coastal processes and sediment transport near Prudhoe Bay; the establishment of a colar infrared file of the entire state; and photomapping for geological surveys. Monitoring of the outer continental shelf environment and reindeer herds was also conducted. Institutional constraints to full utilization of satellite remote sensing in the state are explored and plans for future activites include the generation of awareness by government agencies, the training of state personnel, and improving coordination and communication with users.

Miller, J. M.↗

The earth observing system - A mission for lidar remote sensing technology

NASA plans an earth observing system (EOS) to address low earth orbit remote sensing satellite requirements. EOS will incorporate three active remote-sensing instruments employing some form of lidar: (1) the Lidar Atmospheric Sounder and Altimeter (LASA), the Laser Atmospheric Wind Sounder (LAWS), and the Geodynamics Laser Ranging System (GLRS). LASA will deepen understanding of atmospheric composition and structure; LAWS will measure winds using Doppler lidar technology; GLRS will be used to ascertain the position of strategically placed retroreflectors to an accuracy of several cm.

Sokoloski, Martin M.↗

Cloud microphysical properties from multispectral reflectance measurements

Images as well as statistical properties of the cloud optical thickness and effective particle radius derived from reflected solar radiation measurements at 0.75, 1.65, and 2.16 micron are presented. The remote-sensing-derived cloud optical thickness and effective radius are compared with the values inferred from nearly simultaneous in situ microphysical measurements obtained from an aircraft. A good spatial correlation is observed for both the optical thickness and effective radius, it is noted that the remote sensing has a tendency to overestimate the effective radius; the optical thickness is overestimated for small optical thicknesses and underestimated for large optical thicknesses. The marginal probability density functions of optical thickness and effective radius are derived from the remote-sensing results and discussed.

King, Michael D.↗

Project Copernicus: An Earth observing system

Hunsaker Aerospace Corporation is presenting this proposal for Project Copernicus to fulfill the need for space-based remote sensing of Earth. Concentration is on data acquisition. Copernicus is designed to be a flexible system of spacecraft in a low near-polar orbit. The goal is to acquire data so that the scientists may begin to understand many Earth processes and interactions. The mission objective of Copernicus is to provide a space-based, remote-sensing measurement data acquisition and transfer system for 15 years. A description of the design project is presented.

Source record↗