Search NASA⌕ Search

SEARCH · Search NASA

Results for “Runge-Kutta method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

A method of weighted residuals with trigonometric basis functions for sound transmission in circular ducts

The method of weighted residuals (MWR) in the form of a modified Galerkin method with trigonometric basis functions is used to compute the transmission of sound in an axisymmetric duct. The method is used to generate the axial wave number for uniform ducts. These are compared with exact solutions generated by a formal eigenvalue routine in the hard-wall case and a Runge-Kutta integration eigenvalue scheme in the soft-wall case. The method is applicable to both flow and no-flow cases.

Vo, P. T.↗
NASA NTRS1985

DEAN: A program for dynamic engine analysis

The Dynamic Engine Analysis program, DEAN, is a FORTRAN code implemented on the IBM/370 mainframe at NASA Lewis Research Center for digital simulation of turbofan engine dynamics. DEAN is an interactive program which allows the user to simulate engine subsystems as well as a full engine systems with relative ease. The nonlinear first order ordinary differential equations which define the engine model may be solved by one of four integration schemes, a second order Runge-Kutta, a fourth order Runge-Kutta, an Adams Predictor-Corrector, or Gear's method for still systems. The numerical data generated by the model equations are displayed at specified intervals between which the user may choose to modify various parameters affecting the model equations and transient execution. Following the transient run, versatile graphics capabilities allow close examination of the data. DEAN's modeling procedure and capabilities are demonstrated by generating a model of simple compressor rig.

Sadler, G. G.↗
NASA NTRS1986

Pseudo-time algorithms for the Navier-Stokes equations

A pseudo-time method is introduced to integrate the compressible Navier-Stokes equations to a steady state. This method is a generalization of a method used by Crocco and also by Allen and Cheng. We show that for a simple heat equation that this is just a renormalization of the time. For a convection-diffusion equation the renormalization is dependent only on the viscous terms. We implement the method for the Navier-Stokes equations using a Runge-Kutta type algorithm. This permits the time step to be chosen based on the inviscid model only. We also discuss the use of residual smoothing when viscous terms are present.

Swanson, R. C.↗
NASA NTRS1985

DEAN - A program for Dynamic Engine ANalysis

The Dynamic Engine Analysis Program, DEAN, is a FORTRAN code implemented on the IBM/370 mainframe at NASA Lewis Research Center for digital simulation of turbofan engine dynamics. DEAN is an interactive program which allows the user to simulate engine subsystems as well as full engine systems with relative ease. The nonlinear first order ordinary differential equations which define the engine model may be solved by one of four integration schemes, a second order Runge-Kutta, a fourth order Runge-Kutta, an Adams Predictor-Corrector, or Gear's method for still systems. The numerical data generated by the model equations are displayed a specified intervals between which the user may choose to modify various parameters affecting the model equations and transient execution. Following the transient run, versatile graphics capabilities allow close examination of the data. DEAN's modeling procedure and capabilities are demonstrated by generating a model of simple compressor rig.

Sadler, G. G.↗
NASA NTRS1977

An ILLIAC program for the numerical simulation of homogeneous incompressible turbulence

An algorithm and ILLIAC computer program, developed for the simulation of homogeneous incompressible turbulence in the presence of an applied mean strain, are described. The turbulence field is represented spatially by a truncated triple Fourier series (spectral method) and followed in time using a fourth-order Runge-Kutta algorithm. These include: (1) transformation of variables suggested by Taylor's sudden-distortion theory; (2) implicit viscous diffusion by use of an integrating factor; (3) implicit pressure calculation suggested by Taylor's sudden-distortion theory, and (4) inexpensive control of aliasing by random and phased coordinate shifts.

Rogallo, R. S.↗
NASA NTRS1979

Nonlinear wave choked inlets

The quasi-one dimensional flow program was modified in two ways. The Runge-Kutta subroutine was replaced with a subroutine which used a modified divided difference form of the Adams Pece method and the matrix inversion routine was replaced with a pseudo inverse routine. Calculations were run using both the original and modified programs. Comparison of the calculations showed that the original Runge-Kutta routine could not detect singularity near the throat and was integrating across it. The modified version was able to detect the singularity and therefore gave more valid calculations.

Source record↗
NASA NTRS1984

On the solution of problems involving impact type loading

The response of beam and plate members to pulse and impact loading is investigated, and numerical methods are analyzed and compared. The equations of motion, the finite difference and finite element methods, the time integration/Runge-Kutta techniques, and material modeling are discussed in detail. It is found that both the finite difference and the finite element methods could be accurately employed to discretize the spatial variation in the displacements. Central differences or a fourth order Runge-Kutta algorithm could be used for the time integration. The total energy of the system would give the stability and accuracy of the solution. Results showed that the finite element method provided better efficiency in obtaining accurate solution than the finite difference method when a scalar processor is used. However, the finite difference method was more efficient on the vector processor. Therefore, the most efficient method of solution depends on the type of computer present for the analysis.

Moyer, E. T., Jr.↗
NASA NTRS1986

An Euler aerodynamic method for leading-edge vortex flow simulation

The current capabilities and the future plans for a three dimensional Euler Aerodynamic Method are described. The basic solution algorithm is based on the finite volume, Runge-Kutta pseudo-time-stepping scheme of FLO-57. Several modifications to improve accuracy and computational efficiency were incorporated and others are being investigated. The computer code is used to analyze a cropped delta wing at 0.6 Mach number and an arrow wing at 0.85 Mach number. Computed aerodynamic parameters are compared with experimental data. In all cases, the configuration is impulsively started and no Kutta condition is applied at sharp edges. The results indicate that with additional development and validation, the present method will be a useful tool for engineering analysis of high speed aircraft.

Raj, P.↗
NASA NTRS1986

Influence of numerical dissipation in computing supersonic vortex-dominated flows

Steady supersonic vortex-dominated flows are solved using the unsteady Euler equations for conical and three-dimensional flows around sharp- and round-edged delta wings. The computational method is a finite-volume scheme which uses a four-stage Runge-Kutta time stepping with explicit second- and fourth-order dissipation terms. The grid is generated by a modified Joukowski transformation. The steady flow solution is obtained through time-stepping with initial conditions corresponding to the freestream conditions, and the bow shock is captured as a part of the solution. The scheme is applied to flat-plate and elliptic-section wings with a leading edge sweep of 70 deg at an angle of attack of 10 deg and a freestream Mach number of 2.0. Three grid sizes of 29 x 39, 65 x 65 and 100 x 100 have been used. The results for sharp-edged wings show that they are consistent with all grid sizes and variation of the artificial viscosity coefficients. The results for round-edged wings show that separated and attached flow solutions can be obtained by varying the artificial viscosity coefficients. They also show that the solutions are independent of the way time stepping is done. Local time-stepping and global minimum time-steeping produce same solutions.

Kandil, O. A.↗
NASA NTRS1985

Numerical solution of the Euler equations for high-speed, blended wing-body configurations

Simulation of high-speed three-dimensional flow about blended wing-body combinations is investigated. A finite-volume explicit scheme with Runge-Kutta time integration is used to solve the compressible Euler equations in order to simulate the flow. The method, augmented by carefully chosen dissipative terms and convergence accelerators such as enthalpy damping and maximum local time-stepping, has been found to be very efficient in solving high-speed flows involving strong shocks. An analytic method for generating the body geometry and an algebraic method for quasi-three-dimensional grid generation are described. Results are presented for various blended wing-body configurations at different Mach numbers and angles of attack.

Moitra, A.↗
NASA NTRS1974

Some self starting integrators for x Prime equals f (x, t)

The integration is discussed of the vector differential equation X = F(x, t) from time t sub i to t sub (i = 1) where only the values of x sub i are available for the the integration. No previous values of x or x prime are used. Using an orbit integration problem, comparisons are made between Taylor series integrators and various types and orders of Runge-Kutta integrators. A fourth order Runge-Kutta type integrator for orbital work is presented, and approximate (there may be no exact) fifth order Runge-Kutta integrators are discussed. Also discussed and compared is a self starting integrator ising delta f/delta x. A numerical method for controlling the accuracy of integration is given, and the special equations for accurately integrating accelerometer data are shown.

Lear, W. M.↗
NASA NTRS1986

Computation of three-dimensional, rotational flow through turbomachinery blade rows for improved aerodynamic design studies

The performance of a three dimensional computer code developed for predicting the flowfield in stationary and rotating turbomachinery blade rows is described in this study. The four stage Runge-Kutta numerical integration scheme is used for solving the governing flow equations and yields solution to the full, three dimensional, unsteady Euler equations in cylindrical coordinates. This method is fully explicit and uses the finite volume, time marching procedure. In order to demonstrate the accuracy and efficiency of the code, steady solutions were obtained for several cascade geometries under widely varying flow conditions. Computed flowfield results are presented for a fully subsonic turbine stator and a low aspect ratio, transonic compressor rotor blade under maximum flow and peak efficiency design conditions. Comparisons with Laser Anemometer measurements and other numerical predictions are also provided to illustrate that the present method predicts important flow features with good accuracy and can be used for cost effective aerodynamic design studies.

Subramanian, S. V.↗
NASA NTRS1985

SSME Turbopump Turbine Computations

A two-dimensional viscous code was developed to be used in the prediction of the flow in the SSME high-pressure turbopump blade passages. The rotor viscous code (RVC) employs a four-step Runge-Kutta scheme to solve the two-dimensional, thin-layer Navier-Stokes equations. The Baldwin-Lomax eddy-viscosity model is used for these turbulent flow calculations. A viable method was developed to use the relative exit conditions from an upstream blade row as the inlet conditions to the next blade row. The blade loading diagrams are compared with the meridional values obtained from an in-house quasithree-dimensional inviscid code. Periodic boundary conditions are imposed on a body-fitted C-grid computed by using the GRAPE GRids about Airfoils using Poisson's Equation (GRAPE) code. Total pressure, total temperature, and flow angle are specified at the inlet. The upstream-running Riemann invariant is extrapolated from the interior. Static pressure is specified at the exit such that mass flow is conserved from blade row to blade row, and the conservative variables are extrapolated from the interior. For viscous flows the noslip condition is imposed at the wall. The normal momentum equation gives the pressure at the wall. The density at the wall is obtained from the wall total temperature.

Jorgenson, P. G. E.↗
NASA NTRS1985

Convergence acceleration of iterative solutions of Euler equations for transonic flow computations

In this paper, two acceleration techniques for Euler calculations are investigated. The first technique is an extrapolation procedure based on the Power Method; it is applicable when the iterative matrix has dominant eigenvalues. Both real and complex conjugate roots are allowed. The second technique is a generalization of the Minimal Residual Method, where the extrapolation step consists of a weighted combination of the corrections at different iteration levels and the weights are chosen to minimize the Lz norm of the residual. Numerical results, using Jameson's Runge-Kutta Multigrid Code, are presented. The extra computational work to apply either technique is negligible and the extra storage is not a problem on current supercomputers.

Hafez, M.↗
NASA NTRS1986

Euler solutions for high-speed flow about complex three-dimensional configurations

A numerical algorithm based on a finite-volume explicit scheme with Runge-Kutta time integration of the Euler equations is presented for calculating high-speed three-dimensional flow about complex aerospace configurations. The use of enhancing factors such as artificial dissipative terms, enthalpy damping and local time-stepping are described. An algebraic method for generating quasi-three-dimensional computational grids for realistic aerospace configurations is presented. Computed results for various three-dimensional bodies at different Mach numbers and angles of attack have been obtained using the methods for grid-generation and flow simulation. Comparison of computed and experimental data for an advanced tactical aircraft-like configuration is presented, and a reasonable agreement of the data is noticed.

Moitra, A.↗
NASA NTRS1986

Development of an explicit multigrid algorithm for quasi-three-dimensional viscous flows in turbomachinery

A rapid quasi three-dimensional analysis was developed for blade-to-blade flows in turbomachinery. The analysis solves the unsteady Euler or thin layer Navier-Stokes equations in a body-fitted coordinate system. It accounts for the effects of rotation, radius change, and stream-surface thickness. The Baldwin-Lomax eddy-viscosity model is used for turbulent flows. The equations which are solved b a two-stage Runge-Kutta scheme made efficient by use of vectorization, a variable time-step, and a flux-based multigrid scheme, are described. A stability analysis is presented for the two-stage. Results for a flat-plate model problem show the applicability of the method to axial, radial, and rotating geometries. Results for a centrifugal impeller and a radial diffuser show that the quasi three-dimensional viscous analysis can be a practical design tool.

Chima, R. V.↗
NASA NTRS1985

Development of an explicit multigrid algorithm for quasi-three-dimensional viscous flows in turbo-machinery

A rapid quasi three-dimensional analysis was developed for blade-to-blade flows in turbomachinery. The analysis solves the unsteady Euler or thin layer Navier-Stokes equations in a body-fitted coordinate system. It accounts for the effects of rotation, radius change, and stream-surface thickness. The Baldwin-Lomax eddy-viscosity model is used for turbulent flows. The equations which are solved by a two-stage Runge-Kutta scheme made efficient by use of vectorization, a variable time-step, and a flux-based multigrid scheme, are described. A stability analysis is presented for the two-stage scheme. Results for a flat-plate model problem show the applicability of the method to axial, radial, and rotating geometries. Results for a centrifugal impeller and a radial diffuser show that the quasi three-dimensional viscous analysis can be a practical design tool.

Chima, R. V.↗