Search NASA⌕ Search

SEARCH · Search NASA

Results for “SME”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Simulation of DWPF Chemical Process Cell Using a Reaction Calorimeter

The Defense Waste Processing Facility (DWPF) converts liquid radioactive waste into glass using a Sludge Receipt Adjustment Tank (SRAT) and Slurry Mix Evaporator (SME) in addition to other processes. The SRAT and SME processes can be simulated on a small-scale using the Mettler-Toledo Reaction Calorimeter (RC1). This equipment is able to automate the execution and monitoring of experiments involving nonradioactive chemical simulants. During the chemical processing of sludge in the SRAT process, foam begins to form and can foam over the reaction vessel. The current antifoam used at DWPF creates a risk of increased flammability and has a limited pH range. Usually, mercury is circulated back into the reaction vessel during the SRAT process, making it difficult to remove. To combat foam over, novel antifoams will be tested during the boil-up process using the RC1. To improve mercury extraction, 3D-printed coalescer columns will be tested within the Mercury Water Wash Tank (MWWT) of the RC1. Testing of Simulant Sludge Batch 6 (SB6) was performed to ensure: the sludge would form a stable foam at boiling during full SRAT/SME runs; the antifoam would reduce the amount of foam within the vessel The sludge and a Precipitate Reactor Feed Tank (PRFT) simulant with monosodium titanate (MST) were mixed separately, combined, and then heated to boiling. As shown below, the antifoam used was able to eliminate the foam within the vessel, as expected. The FormLabs Form2 3D Printer can be used to create roughly 3-inch tall and 1-inch diameter columns from clear and ceramic resins. The columns will utilize chemical and physical forces to draw the mercury out of a condensed offgas stream leaving the RC1 reaction vessel. These columns will be tested during full SRAT/SME runs on the basis of how well they are able to collect elemental mercury. In preparation for full-scale runs, the RC1 equipment was assembled onto a custom table and tested with water runs. The software used to control automation, iControl, has a user-friendly interface that allows the experiment to be altered as needed. An example of the data recorded during an experimental run is represented in Figure 1 below. Water runs were utilized as a way to prove if the RC1 system was functioning in the following areas: Boil-up rates, Chemical additions using pumps, Temperature readings, Balance readings, Probe readings, Offgas system, Agitation. Future Plans: Five novel antifoams will be tested during full SRAT/SME runs. The most effective antifoam will be utilized in DWPF's Chemical Process Cell. The design of the Mercury Extraction Coalescer can be further manipulated to increase the extraction of not only elemental mercury, but other heavy metals in environmental remediation processes as well.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Importance of Electron Correlation on the Geometry and Electronic Structure of [2Fe–2S] Systems: A Benchmark Study of the [Fe 2 S 2 (SCH 3 ) 4 ] 2–,3–,4– , [Fe 2 S 2 (SCys) 4 ] 2– , [Fe 2 S 2 (S- p -tol) 4 ] 2– , and [Fe 2 S 2 (S- o -xyl) 4 ] 2– Complexes

Iron–sulfur clusters are crucial for biological electron transport and catalysis. Obtaining accurate geometries, energetics, manifolds of their excited electronic states, and reduction energies is important to understand their role in these processes. Here, using a [2Fe–2S] model complex with Fe II and Fe III oxidation states, which leads to different charges, i.e., [Fe 2 S 2 (SMe) 4 ] 2–,3–,4– , we benchmarked a variety of computational methodologies ranging from density functional theory (DFT) to post-Hartree–Fock methods, including complete active space self-consistent field (CASSCF), multireference configuration interaction, the second-order N-electron valence state perturbation theory (NEVPT2), and the linearized integrand approximation of adiabatic connection (AC0) approaches. Additionally, we studied three experimentally well-characterized complexes, [Fe 2 S 2 (SCys) 4 ] 2– , [Fe 2 S 2 (S-o-tol) 4 ] 2– , and [Fe 2 S 2 (S-o-xyl) 4 ] 2– , via DFT methods. We conclude that the dynamic electron correlation is important for accurately predicting the geometry of these complexes. Broken symmetry (BS) DFT correctly predicts experimental geometries of low-spin multiplicity, while CASSCF does not. However, BS-DFT significantly overestimates the difference between the low- and high-spin electronic states for a given oxidation state. At the same time, CASSCF underestimates it but provides relative energies closer to the reference NEVPT2 results. Finally, AC0 provides energetics of NEVPT2 quality with the additional advantage of being able to use large CASSCF sizes. NEVPT2 gives the best estimates of the Fe III /Fe III → Fe II /Fe III (4.27 eV) and Fe II /F III → Fe II /F II (7.72 eV) reduction energies. The results provide insight into the electronic structure of these complexes and assist in the understanding of their physical properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Impacts of the Addition of Sodium Reactor Experiment (SRE) and DR-3 Fuel from H-Canyon to Tank 40 on Acid Stoichiometry and Hydrogen Production

H-Canyon plans to discard Sodium Reactor Experiment (SRE) material that is currently stored in Tanks 16.3 and 16.4. Savannah River Remediation (SRR) determined that a portion of the SRE material can be added to Sludge Batch 9 (SB9) in Tank 40 and the remainder will be added to Sludge Batch 10 (SB10) that is currently being prepared in Tank 51. A processing flowsheet for both the nitric-formic acid flowsheet and the nitric-glycolic acid flowsheet were previously developed for SB9 sludge-only and coupled operation with the Actinide Removal Process – Modular Caustic Side Solvent Extraction Unit (ARP-MCU) and the Salt Waste Processing Facility (SWPF). Due to the compositional change in Tank 40 after the addition of SRE material, it is necessary to determine the influence on the acid stoichiometry operating window and hydrogen production for SB9 processing. An assessment was completed to address the influence of an addition of SRE and DR-3 Fuel from H-Canyon on the chemistry of Tank 40, the defined acid stoichiometry window (with and without SWPF streams) for the nitric-formic and nitric-glycolic acid flowsheets, and the resulting influence of the hydrogen production. Hydrogen production during the SRAT/SME cycles consists of thermolytic, radiolytic, and catalytic hydrogen. For the nitric-formic acid flowsheet, catalytic hydrogen dominates the hydrogen production during DWPF operation mode for the SRAT and SME vessels. This report was written to summarize that assessment. No SRNL testing is needed prior to adding up to 7,100 additional gallons of SRE and DR-3 Fuel from H-Canyon to Tank 40. Also, the addition of SRE will not exceed the Shielded Cells reported values for catalytic hydrogen for either the nitric-formic acid flowsheet (Technical Safety Requirement (TSR) limit of 0.15 lb/h) or the nitric-glycolic acid flowsheet (TSR limit 0.024 lb/h). The addition of the ARP stream from SWPF and the use of the nitric-glycolic acid flowsheet are both expected to decrease hydrogen generation, leading to a larger safety margin in the CPC.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

The Coordination Behaviour of Cu I Photosensitizers Bearing Multidentate Ligands Investigated by X-ray Absorption Spectroscopy

A systematic series of four novel homo- and heteroleptic CuI photosensitizers based on tetradentate 1,10-phenanthroline ligands of the type X^N^N^X containing two additional donor moieties in the 2,9-position (X=SMe or OMe) were designed. Their solid-state structures were assessed by X-ray diffraction. Cyclic voltammetry, UV-vis absorption, emission and X-ray absorption spectroscopy were then used to determine their electrochemical, photophysical and structural features in solution. Following, time-resolved X-ray absorption spectroscopy in the picosecond time scale, coupled with time-dependent density functional theory calculations, provided in-depth information on the excited state electron configurations. For the first time, a significant shortening of the Cu–X distance and a change in the coordination mode to a pentacoordinated geometry is shown in the excited states of the two homoleptic complexes. These findings are important with respect to a precise understanding of the excited state structures and a further stabilization of this type of photosensitizers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A tool for assessing demand side management and operating strategies for isolated microgrids

Globally, power system operators are exploring ways to leverage the capabilities of smart meters to implement fine-grained demand side management (DSM). Here this paper presents a new simulation tool to evaluate operating strategies for smart-meter-enabled (SME) islanded microgrids being advanced for sustainable rural electrification in emerging economies. Based on MATLAB/Simulink, the tool's component-level models of small microgrids can be easily configured. Alternative rule-based operating strategies are implemented with controllable supply and storage components as well as other components driven by external factors (e.g., weather and time of day). To account for the wide range of possible operating conditions in real-world applications, statistical metrics can be evaluated using Monte Carlo (MC) methods based on user-defined, time-dependent probability distributions for demands, supplies, and environmental variables. Features of the tool are demonstrated with case studies for a representative microgrid in rural Rwanda.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

The Effect of Geometry, Spin, and Orbital Optimization in Achieving Accurate, Correlated Results for Iron–Sulfur Cubanes

Iron–sulfur clusters comprise an important functional motif in the catalytic centers of biological systems, capable of enabling important chemical transformations at ambient conditions. This remarkable capability derives from a notoriously complex electronic structure that is characterized by a high density of states that is sensitive to geometric changes. The spectral sensitivity to subtle geometric changes has received little attention from correlated, large active space calculations, owing partly to the exceptional computational complexity for treating these large and correlated systems accurately. Here, to provide insight into this aspect, we report the first Complete Active Space Self Consistent Field (CASSCF) calculations for different geometries of the [Fe(II/III) 4 S 4 (SMe) 4 ] -2 clusters using two complementary, correlated solvers: spin-pure Adaptive Sampling Configuration Interaction (ASCI) and Density Matrix Renormalization Group (DMRG). We find that the previously established picture of a double-exchange driven magnetic structure, with minute energy gaps (<1 mHa) between consecutive spin states, has a weak dependence on the underlying geometry. However, the spin gap between the singlet and the spin state 2S + 1 = 19, corresponding to a maximal number of Fe-d electrons being unpaired and of parallel spin, is strongly geometry dependent, changing by a factor of 3 upon slight deformations that are still within biologically relevant parameters. The CASSCF orbital optimization procedure, using active spaces as large as 86 electrons in 52 orbitals, was found to reduce this gap compared to typical mean-field orbital approaches. Our results show the need for performing large active space calculations to unveil the challenging electronic structure of these complex catalytic centers and should serve as accurate starting points for fully correlated treatments upon inclusion of dynamical correlation outside the active space.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Synthesis, Structure, and Photophysical Properties of Platinum Compounds with Thiophene-Derived Cyclohexyl Diimine Ligands

Platinum(II) and platinum(IV) compounds were prepared by the stereoselective and regioselective reactions of thiophene-derived cyclohexyl diimine C^N^N-ligands with [Pt 2 Me 4 (μ-SMe 2 ) 2 ]. Newly synthesized ligands were characterized by NMR spectroscopy and elemental analysis, and Pt(II)/Pt(IV) compounds were characterized by NMR spectroscopy, elemental analysis, high-resolution mass spectrometry, and single-crystal X-ray diffraction. UV–vis absorbance and photoluminescence measurements were performed on newly synthesized complexes, as well as structurally related Pt(II)/Pt(IV) compounds with benzene-derived cyclohexyl diimine ligands, in dichloromethane solution, as solids, and as 5% by weight PMMA-doped films. DFT and TD-DFT calculations were performed, and the results were compared with the observed spectroscopic properties of the newly synthesized complexes. X-ray total scattering measurements and real space pair distribution function analysis were performed on the synthesized complexes to examine the local- and intermediate-range atomic structures of the emissive solid states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Dual-Emitting Cyclometalated Platinum Compounds with Isocyanide Ligands

Cyclometalated platinum(II) compounds with both C^N chelating iminic ligands and isocyanide ligands were synthesized. Two sets of compounds from the reaction of two separate HC^N ligands (derived from thiophene or benzene) with [Pt2Me4(μ-SMe 2 ) 2 ] were obtained, resulting in square planar compounds with an anionic C^N ligand, a methyl ligand, and a dimethyl sulfide (dms) ligand completing the coordination sphere. Subsequently, the dms ligand was easily substituted by several isocyanide ligands (2-naphthyl, adamantyl, 2,6-dimethylphenyl, ptoluenesulfonylmethyl). The compounds were characterized by multinuclear NMR spectroscopy, IR spectroscopy, and singlecrystal X-ray diffraction (SCXRD). Their photophysical properties were explored using UV/vis, emission, and transient absorption (TA) spectroscopy. The emission spectra for the thiophene-derived compounds showed well-defined dual emission peaks, while the benzene-derived compounds’ bands appeared less resolved. DFT and TDDFT calculations were performed, and results were compared to the observed spectroscopic properties of the newly synthesized complexes.

Inorganic carbon compounds↗
DOE OSTI2026

Cyclometalated Platinum Compounds from Competing C–H/C–X Bond Activation Pathways

X−C^N^N (X = Br, Cl) ligands were reacted with [Pt 2 Me 4 (μ- SMe 2 ) 2 ], 1, resulting in a six-coordinate cyclometalated platinum(IV) compound containing an anionic C^N^N ligand when X = Br and both a platinum(IV) and a platinum(II) product when X = Cl. The platinum(II) species was formed by C−H activation, followed by reductive elimination of methane. The platinum compounds were characterized by multinuclear NMR spectroscopy and single-crystal X-ray diffraction (SCXRD). Photophysical properties were explored by using UV/vis, emission, and transient absorption (TA) spectroscopies. DFT and TDDFT calculations were performed to examine the competition between C−H activation and C−X oxidative addition and compared to experimental results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Enabling Ethanol Dehydrogenation Catalysis by Postsynthetic Anion Exchange of Triazolate-Based Metal–Organic Frameworks

Materials containing soft, polarizable elements are expanding the boundaries of catalytic properties, offering unique electronic communication and stability characteristics compared with their harder counterparts due to the enhanced covalent nature of metal–ligand interactions. However, integrating soft components like sulfur into metal–organic frameworks (MOFs) for catalytic applications remains a largely underexplored challenge. Here, we report the synthesis of a family of triazole-based MOFs and expand upon established postsynthetic anion exchange methods to incorporate sterically encumbered polarizable elements, such as alkyl thiolates. Single-crystal X-ray diffraction, coupled with elemental analysis, confirms the successful anion exchange within M 2 X 2 BBTA (M = Co, Ni; X = μ-Cl, μ-OH, μ-SH, μ-SMe, μ-SEt; H 2 BBTA = 1H,5H-benzo(1,2-d:4,5-d′)bistriazole). We found that the anion identity significantly impacts the catalytic activity and selectivity of the MOFs, especially in nonoxidative ethanol dehydrogenation. Temperature-programmed experiments indicated that the metal single sites act as catalytically active sites below 250 °C. This work not only expands the synthetic toolbox for incorporating polarizable components into MOFs but also provides critical insights into their catalytic potential.

Anions↗
DOE OSTI2021

Synthesis, structures and catalytic activity of some BINOL based boronates and boronium salts

The BINOL supported chiral boronate ester [C 10 H 12 O 2 BC 6 F5(THF)] [(R)-1], [C 10 H 12 O 2 BC 6 F 5 (O=PEt 3 )] [(R)-3] and [C 10 H 12 O 2 BC 6 F 5 ] 2 [(R,R)-2] as well as the chiral boronium salts [C 10 H 12 O 2 B(O=PEt 3 ) 2 ] + [B(O 2 C 10 H 12 ) 2 ] - , [(R)-6] and [C 10 H 12 O 2 B(O=SMe 2 ) 2 ] + [B(O 2 C 10 H 12 ) 2 ] [(R)-7] have been synthesized, characterized by NMR spectroscopy, and the solid state structures of [(R)-1], [(R,R)-2] and [(R)-3] determined. Chiral ester [(R)-1] was found to be a potent Lewis acid, similar to B(C 6 F 5 ) 3 , and capable of rapidly catalyzing the annulation of (R)-, (S)- and rac-styrene oxide with nitrone PhCH=N(O)Me to trans-2-methyl-3,6-diphenyl-1,4,2-dioxazine (trans-11) with high regio- and diastereoslectivities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Initial Implementation Of Machine Learning System for SRF Cavity Fault Classification at CEBAF

The Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Laboratory is high power CW electron accelerator. It uses a mixture of two types of SRF modules, older, lower energy C20/C50 modules and newer higher energy C100 modules, arrayed in two anti-parallel linear accelerators. Accurately classifying the type of cavity faults is essential to maintaining and improving accelerator performance. Each C100 cryomodule contains eight 7-cell cavities. When a cavity fault occurs within a cryomodule, all eight cavities generate 17 waveforms each containing 8192 points. This data is exported from EPICS and saved for review. Analysis of these waveforms is time intensive and requires subject matter expertise (SME). SMEs examine the data from each event and label it according to one of several known cavity fault types. Multiple machine learning models have been developed on this labeled dataset with sufficient performance to warrant the creation of a limited machine learning software system for use by accelerator operations staff. This paper discusses the transition from model development to implementation of a prototype system.

Carpenter, A.↗
DOE OSTI2026

ORCHID: Orchestrated Retrieval-Augmented Classification of High-Risk Property with Intelligent Decision-Making

High-Risk Property (HRP) classification is critical at U.S. Department of Energy (DOE) sites, where inventories include sensitive and often dual-use equipment. Compliance must track evolving rules designated by various export control policies to make transparent and auditable decisions. Traditional expert-only workflows are time-consuming, backlog-prone, and struggle to keep pace with shifting regulatory boundaries. We propose ORCHID, a modular agentic framework for HRP classification that pairs retrieval-augmented generation (RAG) with human oversight to produce policy based outputs that can be audited. Small cooperating agents—retrieval, description refiner, classifier, validator, and feedback logger—coordinate via agent-to-agent messaging and invoke tools through the Model Context Protocol (MCP) for model-agnostic on-premise operation. The interface follows an "Item to Evidence to Decision" loop with step-by-step reasoning, on-policy citations, and append-only audit bundles (run-cards, prompts, evidence). In preliminary tests on real HRP cases, ORCHID improves accuracy and traceability over a non-agentic baseline while deferring uncertain items to Subject Matter Experts (SMEs). The demonstration shows single item submission, grounded citations, SME feedback capture, and exportable audit artifacts—illustrating a practical path to trustworthy LLM assistance in sensitive DOE compliance workflows.

Das, Sanjay [ORNL] (ORCID:0009000542591915)↗
DOE OSTI2025

ICAT: The Interactive Corpus Analysis Tool

The Interactive Corpus Analysis Tool (ICAT) is a Python library for creating dashboards to explore textual datasets and build simple binary classification models to help filter through them and focus on entries of interest. This tool uses a form of interactive machine learning (IML), a paradigm of “machine teaching” (Simard et al., 2017) that sits at the intersection of the fields of human computer interaction (HCI), visual analytics, and machine learning. The intent of ICAT is to allow subject matter experts (SME) with limited to no experience in machine learning to benefit from an iterative human-in-the-loop (HITL) approach to building their own model without needing to understand the details of the underlying algorithm. This interactivity is achieved by allowing the user to create features, label data points, and visually manipulate a representation of the features to manually cluster and investigate data, while a model is trained on the fly based on these actions. ICAT is built on top of the Panel (Holoviz, 2018) library, using a combination of Vega, a custom IPyWidget using D3, and ipyvuetify, and is intended to be used inside of a Jupyter environment.

Martindale, Nathan [Oak Ridge National Laboratory ↗
DOE OSTI2022

Analysis of DWPF Sludge Batch 6 (Macrobatch 7): Pour Stream Glass Samples

The Defense Waste Processing Facility (DWPF) began processing Sludge Batch 6 (SB6), also referred to as Macrobatch 7 (MB7), in June 2010. SB6 is a blend of the heel of Tank 40 from Sludge Batch 5 (SB5), H-Canyon Np transfers and SB6 that was transferred to Tank 40 from Tank 51.1 SB6 was processed using Frit 418. Sludge is received into the DWPF Chemical Processing Cell (CPC) and is processed through the Sludge Receipt and Adjustment Tank (SRAT) and Slurry Mix Evaporator Tank (SME). The treated sludge slurry is then transferred to the Melter Feed Tank (MFT) and fed to the melter. During processing of each sludge batch, the DWPF is required to take at least one glass sample to meet the objectives of the Glass Product Control Program (GPCP) and to complete the necessary Production Records so that the final glass product may be disposed of at a Federal Repository. The DWPF requested various analyses of radioactive glass samples obtained from the melter pour stream during processing of SB6 as well as reduction/oxidation (REDOX) analysis of MFT samples to determine the impact of Argon bubbling. Sample analysis followed the Task Technical and Quality Assurance Plan (TTQAP) and an Analytical Study Plan (ASP). Four Pour Stream (PS) glass samples and two MFT slurry samples were delivered to the Savannah River National Laboratory (SRNL) from the DWPF. Table 1-1 lists the sample information for each pour stream glass sample. SB6 PS3 (S03472) was selected as the official pour stream sample for SB6 and full analysis was requested. This report details the visual observations of the as-received SB6 PS No.3 glass sample as well as results for the chemical composition, Product Consistency Test (PCT), radionuclide content, noble metals, and glass density. REDOX results will be provided for all four pour stream samples and vitrified samples of MFT-558 and MFT-568A. Where appropriate, data from other pour stream samples will be provided.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Permanganate Oxidation of Actual Defense Waste Processing Facility (DWPF) Slurry Mix Evaporator Condensate Tank (SMECT) and Offgas Condensate Tank (OGCT) Samples to Remediate Glycolate

Savannah River Remediation (SRR) tasked Savannah River National Laboratory (SRNL) to examine glycolate destruction in radioactive samples emulating the proposed process. Experiments with radioactive Defense Waste Processing Facility (DWPF) condensates were performed to demonstrate the oxidation of glycolate using sodium permanganate. One test each was performed for Off-Gas Condensate Tank (OGCT) and Slurry Mix Evaporator Condensate Tank (SMECT) samples received. Condensates were blended with Recycle Collection Tank (RCT) heel simulant and Slurry Mix Evaporator (SME) product containing glycolate to represent typical RCT compositions with estimated nominal entrainment of glycolate. A permanganate to glycolate (P/G) molar ratio targeting 5.7 decreased sample glycolate concentration below Ion Chromatography (IC), glycolate method reporting limits in less than 2 hours for the OGCT sample and in less than 8 hours for the SMECT sample.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Programmatic Equipment Procurement: An Improved System for Coordinating the Procurement of New Programmatic Equipment

A better structured system that outlines the communication required between the Project Manager (PM) and all the Key Stakeholders. This system will help the PM work with the SMEs to define the scope of the equipment to be procured. It will also help the PM confirm that all associated key stakeholders (WCI IT, FPOC, etc.) have been contacted and have reviewed the new equipment being proposed to be procured. This step is crucial in order to confirm that the piece of equipment being procured not only meets the SME requirements but also the security, safety and building requirements on site. This is a step that is currently missed or overlooked and can cause delays in procurement after the piece of equipment has already been decided on. This new system should help mitigate any delays or miscommunication regarding the piece of equipment being procured.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

China’s Bid To Lead Artificial Intelligence Chip Development within the Decade

In 2017, the Chinese government announced an ambitious, broad strategy to become the global leader in artificial intelligence (AI) theories, technologies, and applications by 2030 and indicated that China’s ability to indigenously produce cutting-edge AI chips would be integral to its success. China’s goal to become a dominant producer of AI hardware within a decade is a bold undertaking because China faces domestic chip production challenges and fierce competition from US chip producers. Our review of Chinese AI chip product lines shows various levels where Chinese companies compete with global firms in the production chain. China lacks a robust indigenous AI chip production infrastructure, and the United States and its allies are tightening controls on the supply of advanced semiconductor manufacturing equipment (SME) and electronic design automation (EDA) software to China. In contrast to their Chinese counterparts, US companies operate in all areas of AI chip production and have consistently driven the development of new chip designs. AI chip production is a costly endeavor, and China’s chip producers currently lack the customer base to lead global AI chip development by the 2030 goal. An expanded customer base may help China attract the necessary expertise to bolster its AI chip production chain. This would also help Chinese producers make their investments in the requisite technology economically sustainable. Chinese researchers continue to pursue promising next-generation AI chip designs, such as neuromorphic computing-based architectures, which in the next five to ten years could position Chinese companies to make or contribute to key innovations in the field.

74 ATOMIC AND MOLECULAR PHYSICS↗