Results for “STRUCTURAL WEIGHT” — Page 5

NASA NTRSDate not supplied

Lightweight Thrust Chamber Composite Overwrap Lessons Learned

The manufacturing, design, and analysis of filament wound carbon fiber/polymer composite overwraps for additively manufactured, copper combustion chambers are a critical part of NASA’s Rapid Analysis and Manufacturing Propulsion Technology (RAMPT) project. Ideally, the composite overwrap acts as a light-weight structural jacket and allows significant weight reduction of the high pressure thrust chamber assembly, reduction of overall cost, and reduced fabrication schedules. Chamber assemblies for 2000 lb. (2k) and 7000 lb. (7k) of thrust have been successfully tested at NASA’s Marshall Space Flight Center. Multiple lessons were learned throughout the overwrap process development and manufacturing trials. The lessons learned on small scale hardware, such as the 2k and 7k chambers, will guide further composite manufacturing technologies and enable a progression to larger scale assemblies with greater structural loads. Material performance requirements, manufacturing process development, and surface preparation were evaluated during the small chamber trials, with the broad thermal requirements of the resin being the primary driver for material selection and processing. Both epoxy and bismaleimide (BMI) materials were evaluated with respect to both performance in the hot-fire test and ease of fabrication. Separately, surface preparation procedures were studied with the goal of providing a smooth chamber surface to promote a non-bonded overwrap. Recent testing of the 7k trust chamber has provided data in Non-Destructive Evaluation (NDE) and processing in order to continue to evaluate the performance requirements stated.

Allison Clark↗

NASA NTRS1977

Implementation of wind performance studies for large antenna structures

Structural design procedures are described for a large antenna system to meet performance requirements under gravity and wind loading. A computational method is shown for the evaluation of performance in response to wind loading. Cumulative probability distribution curves for wind loading gain reductions for 100-m-diameter antennas are developed to compare a relatively heavy baseline reflector backup structure with two lighter-weight structures; all have equivalent, acceptable performance for gravity loading.

Levy, R.↗

NASA NTRS2005

NASA Heavy Lift Rotorcraft Systems Investigation

The NASA Heavy Lift Rotorcraft Systems Investigation examined in depth several rotorcraft configurations for large civil transport, designed to meet the technology goals of the NASA Vehicle Systems Program. The investigation identified the Large Civil Tiltrotor as the configuration with the best potential to meet the technology goals. The design presented was economically competitive, with the potential for substantial impact on the air transportation system. The keys to achieving a competitive aircraft were low drag airframe and low disk loading rotors; structural weight reduction, for both airframe and rotors; drive system weight reduction; improved engine efficiency; low maintenance design; and manufacturing cost comparable to fixed-wing aircraft. Risk reduction plans were developed to provide the strategic direction to support a heavy-lift rotorcraft development. The following high risk areas were identified for heavy lift rotorcraft: high torque, light weight drive system; high performance, structurally efficient rotor/wing system; low noise aircraft; and super-integrated vehicle management system.

Johnson, Wayne↗

NASA NTRS2006

Designs and Technology Requirements for Civil Heavy Lift Rotorcraft

The NASA Heavy Lift Rotorcraft Systems Investigation examined in depth several rotorcraft configurations for large civil transport, designed to meet the technology goals of the NASA Vehicle Systems Program. The investigation identified the Large Civil Tiltrotor as the configuration with the best potential to meet the technology goals. The design presented was economically competitive, with the potential for substantial impact on the air transportation system. The keys to achieving a competitive aircraft were low drag airframe and low disk loading rotors; structural weight reduction, for both airframe and rotors; drive system weight reduction; improved engine efficiency; low maintenance design; and manufacturing cost comparable to fixed-wing aircraft. Risk reduction plans were developed to provide the strategic direction to support a heavy-lift rotorcraft development. The following high risk areas were identified for heavy lift rotorcraft: high torque, light weight drive system; high performance, structurally efficient rotor/wing system; low noise aircraft; and super-integrated vehicle management system.

Johnson, Wayne↗

NASA NTRS2010

Effects of Buckling Knockdown Factor, Internal Pressure and Material on the Design of Stiffened Cylinders

A design study was conducted to investigate the effect shell buckling knockdown factor (SBKF), internal pressure and aluminum alloy material selection on the structural weight of stiffened cylindrical shells. Two structural optimization codes were used for the design study to determine the optimum minimum-weight design for a series of design cases, and included an in-house developed genetic algorithm (GA) code and PANDA2. Each design case specified a unique set of geometry, material, knockdown factor combinations and loads. The resulting designs were examined and compared to determine the effects of SBKF, internal pressure and material selection on the acreage design weight and controlling failure mode. This design study shows that use of less conservative SBKF values, including internal pressure, and proper selection of material alloy can result in significant weight savings for stiffened cylinders. In particular, buckling-critical cylinders with integrally machined stiffener construction can benefit from the use of thicker plate material that enables taller stiffeners, even when the stiffness, strength and density properties of these materials appear to be inferior.

Lovejoy, Andrew E.↗

NASA NTRSDate not supplied

Mass Estimation Relationships for Conceptual Design of Blended-Wing-Body Cabin with Advanced Structures

Blended-Wing-Body (BWB) achieve a higher L/D than conventional tube and wing aircraft due to aerodynamic shaping of the non-circular pressure vessel that is made feasible through advanced composite technologies such as Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS). Due to the relatively new nature of the BWB, sufficient historical data does not exist for conceptual aircraft designers to base their structural weight estimations on, especially for estimating weights of the pressurized cabin center body. This paper describes general parametric Mass Estimation Relationships (MERs) based on high fidelity finite element analysis using PRSEUS for estimating the weight of a BWB pressurized cabin structure that includes cabin area, center body sweep, fineness ratio, and take-off gross weight.

BWB↗

NASA NTRS2002

Performance Validation Approach for the GTX Air-Breathing Launch Vehicle

The primary objective of the GTX effort is to determine whether or not air-breathing propulsion can enable a launch vehicle to achieve orbit in a single stage. Structural weight, vehicle aerodynamics, and propulsion performance must be accurately known over the entire flight trajectory in order to make a credible assessment. Structural, aerodynamic, and propulsion parameters are strongly interdependent, which necessitates a system approach to design, evaluation, and optimization of a single-stage-to-orbit concept. The GTX reference vehicle serves this purpose, by allowing design, development, and validation of components and subsystems in a system context. The reference vehicle configuration (including propulsion) was carefully chosen so as to provide high potential for structural and volumetric efficiency, and to allow the high specific impulse of air-breathing propulsion cycles to be exploited. Minor evolution of the configuration has occurred as analytical and experimental results have become available. With this development process comes increasing validation of the weight and performance levels used in system performance determination. This paper presents an overview of the GTX reference vehicle and the approach to its performance validation. Subscale test rigs and numerical studies used to develop and validate component performance levels and unit structural weights are outlined. The sensitivity of the equivalent, effective specific impulse to key propulsion component efficiencies is presented. The role of flight demonstration in development and validation is discussed.

Trefny, Charles J.↗

NASA NTRS2002

Performance Validation Approach for the GTX Air-Breathing Launch Vehicle

The primary objective of the GTX effort is to determine whether or not air-breathing propulsion can enable a launch vehicle to achieve orbit in a single stage. Structural weight, vehicle aerodynamics, and propulsion performance must be accurately known over the entire flight trajectory in order to make a credible assessment. Structural, aerodynamic, and propulsion parameters are strongly interdependent, which necessitates a system approach to design, evaluation, and optimization of a single-stage-to-orbit concept. The GTX reference vehicle serves this purpose, by allowing design, development, and validation of components and subsystems in a system context. The reference vehicle configuration (including propulsion) was carefully chosen so as to provide high potential for structural and volumetric efficiency, and to allow the high specific impulse of air-breathing propulsion cycles to be exploited. Minor evolution of the configuration has occurred as analytical and experimental results have become available. With this development process comes increasing validation of the weight and performance levels used in system performance determination. This paper presents an overview of the GTX reference vehicle and the approach to its performance validation. Subscale test rigs and numerical studies used to develop and validate component performance levels and unit structural weights are outlined. The sensitivity of the equivalent, effective specific impulse to key propulsion component efficiencies is presented. The role of flight demonstration in development and validation is discussed.

Trefny, Charles J.↗

NASA NTRSDate not supplied

Using Distributed Fiber-Optic Strain Sensing to Estimate Modal Generalized Modal Coordinates from Flight-Test Data

Background and Motivation - Problem - Contemporary aircraft carry around structural mass so that the flutter instabilities lie well outside of the operational envelope. - Better methods of measuring the structural state could allow reduction of the extra structural weight. - Modal filtering - Standard method in structural analysis - Deformations are a combination of mode shapes - Modal filtering is estimating these modal coordinates from data - Often ordinary least squares methods - Often applied to simpler test articles - Factor Analysis - Classic (in psychology) analysis method - Measurements are a combination of small number of unmeasurable variables - Lessons from this factor can be adapted to improve the modal filtering methods

Jeffrey Ouellette↗

NASA NTRSDate not supplied

Using Distributed Fiber-optic Strain Sensing to Estimate Generalized Modal Coordinates from Flight-test Data

Background and Motivation - Problem - Contemporary aircraft carry around structural mass so that the flutter instabilities lie well outside of the operational envelope. - Better methods of measuring the structural state could allow reduction of the extra structural weight - Modal filtering - Standard method in structural analysis - Deformations are a combination of mode shapes - Modal filtering is estimating these modal coordinates from data - Often ordinary least squares methods - Often applied to simpler test articles - Factor Analysis - Analysis method from psychology - Measurements are a combination of small number of unmeasurable variables. - Lessons from factor analysis can be adapted to improve the modal filtering methods

Jeffrey Ouellette↗

NASA NTRSDate not supplied

Mass Estimation Relationship for Conceptual Design of Blended-Wing-Body Cabin with Advanced Structures

Blended-Wing-Body (BWB) aircraft concepts achieve higher lift-to-drag ratios (L/D) than conventional tube and wing aircraft due to aerodynamic shaping of the non-circular pressure vessel that is made feasible using advanced composite technologies such as Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS). Due to the relatively new nature of the BWB configuration, sufficient historical data is not readily available for conceptual aircraft designers to base their structural weight estimations on, especially for estimating weights of the pressurized cabin center body. This paper describes a general parametric Mass Estimation Relationship (MER) based on high fidelity Finite Element Analysis (FEA) using PRSEUS for conceptual weight estimation of a BWB pressurized cabin structure that includes cabin area, center body sweep, fineness ratio, span ratio, and take-off gross weight as parametric design variables.

BWB↗

NASA NTRSDate not supplied

Mass Estimation Relationship for Conceptual Design of Blended-Wing-Body Cabin with Advanced Structures

Blended-Wing-Body (BWB) aircraft concepts achieve higher lift-to-drag ratios (L/D) than conventional tube and wing aircraft due to aerodynamic shaping of the non-circular pressure vessel that is made feasible using advanced composite technologies such as Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS). Due to the relatively new nature of the BWB configuration, sufficient historical data is not readily available for conceptual aircraft designers to base their structural weight estimations on, especially for estimating weights of the pressurized cabin center body. This paper describes a general parametric Mass Estimation Relationship (MER) based on high fidelity Finite Element Analysis (FEA) using PRSEUS for conceptual weight estimation of a BWB pressurized cabin structure that includes cabin area, center body sweep, fineness ratio, span ratio, and take-off gross weight as parametric design variables.

PRSEUS↗

NASA NTRS1972

Aerodynamic loads measurements on externally blown flap STOL models

Small-scale-model data have shown large static loads on the flap system behind the engines. The large-scale-model tests confirmed the magnitude of these loads and indicated that the relative loading of each flap element depends on the engine-wing-flap geometry. Flap response measurements indicated that the unsteady pressure loading excited the natural vibration modes of the flap system on this model. Since this was a boilerplate model, the only conclusion that can be drawn is that the possibility of large vibration loads must be considered for a flight-weight structure. The similarity of the unsteady pressure and flap response spectra for the wind-off and wind-on cases indicated that it may be possible to realistically test flight-weight flap structures on a static test stand rather than endure the extra costs and scheduling problems associated with large-scale wind-tunnel tests. There is a potential flap-temperature problem which if not resolved might preclude the use of materials such as aluminum and the composites in the flap structure.

Greene, G. C.↗

NASA NTRS2012

Finite Element Based HWB Centerbody Structural Optimization and Weight Prediction

This paper describes a scalable structural model suitable for Hybrid Wing Body (HWB) centerbody analysis and optimization. The geometry of the centerbody and primary wing structure is based on a Vehicle Sketch Pad (VSP) surface model of the aircraft and a FLOPS compatible parameterization of the centerbody. Structural analysis, optimization, and weight calculation are based on a Nastran finite element model of the primary HWB structural components, featuring centerbody, mid section, and outboard wing. Different centerbody designs like single bay or multi-bay options are analyzed and weight calculations are compared to current FLOPS results. For proper structural sizing and weight estimation, internal pressure and maneuver flight loads are applied. Results are presented for aerodynamic loads, deformations, and centerbody weight.

Gern, Frank H.↗

NASA NTRS1980

Thermostructural analyses of structural concepts for hypersonic cruise vehicles

A matrix of structural concepts suitable for Mach 5 hydrogen-fueled hypersonic vehicles are defined, and a thermostructural analysis of each is presented. The thermal environment encountered in this flight regime mandates hot structures of superalloy materials or insulated structures using more conventional materials such as titanium, aluminum, and composites. This paper compares the thermostructural performance of several concepts. The various structures are initially sized to carry a 2.5 g subsonic maneuver load. The structural weights are determined, and these components are then evaluated in a transient heating program along with various thermal protection systems to determine the minimum weight combination. The temperature profiles generated for these minimum weight solutions are used as input to a structural analysis along with a model of the appropriate structural concept to calculate thermal stresses. Generally, hot structure concepts have higher thermal stresses. In most cases, the thermal stresses are below the yield strength of the material. It is shown that integral tanks have weights similar to nonintegral tank concepts for the same level of technology. Moreover, an insulated tubular aluminum-composite structure with nonintegral tanks appear attractive for near-term vehicles.

Taylor, A. H.↗

NASA NTRS1976

The NASA structures and materials research program for supersonic cruise aircraft

The structures and materials part of the NASA Supersonic Cruise Aircraft Research (SCAR) program is reviewed. It is pointed out that in more than three years of work significant new technology has been generated. The aircraft configurations which are efficient aerodynamically have aeroelastic problems that must be alleviated by configuration changes, active controls, or additional structural mass. An approach involving the application of advanced composite materials has the highest potential for structural weight reduction. Attention is given to the structural concepts for an arrow-wing supersonic aircraft and the techniques used in the investigations. It is expected that continuing research in SCAR structures and materials should bring high payoffs in the late 1980s.

Cooper, P. A.↗

NASA NTRS1990

Acoustic design criteria in a general system for structural optimization

Passenger comfort is of great importance in most transport vehicles. For instance, in the new generation of regional turboprop aircraft, a low noise level is vital to be competitive on the market. The possibilities to predict noise levels analytically has improved rapidly in recent years. This will make it possible to take acoustic design criteria into account in early project stages. The development of the ASKA FE-system to include also acoustic analysis has been carried out at Saab Aircraft Division and the Aeronautical Research Institute of Sweden in a joint project. New finite elements have been developed to model the free fluid, porous damping materials, and the interaction between the fluid and structural degrees of freedom. The FE approach to the acoustic analysis is best suited for lower frequencies up to a few hundred Hz. For accurate analysis of interior cabin noise, large 3-D FE-models are built, but 2-D models are also considered to be useful for parametric studies and optimization. The interest is here focused on the introduction of an acoustic design criteria in the general structural optimization system OPTSYS available at the Saab Aircraft Division. The first implementation addresses a somewhat limited class of problems. The problems solved are formulated: Minimize the structural weight by modifying the dimensions of the structure while keeping the noise level in the cavity and other structural design criteria within specified limits.

Brama, Torsten↗

NASA NTRS1993

Wing design for a civil tiltrotor transport aircraft: A preliminary study

A preliminary study was conducted on the design of the wing-box structure for a civil tiltrotor transport aircraft. The wing structural weight is to be minimized subject to structural and aeroelastic constraints. The composite wing-box structure is composed of skin, stringers, ribs, and spars. The design variables include skin ply thicknesses and orientations and spar cap and stringer cross-sectional areas. With the total task defined, an initial study was conducted to learn more about the intricate dynamic and aeroelastic characteristics of the tiltrotor aircraft and their roles in the wing design. Also, some work was done on the wing finite-element modeling (via PATRAN) which would be used in structural analysis and optimization. Initial studies indicate that in order to limit the wing/rotor aeroelastic and dynamic interactions in the preliminary design, the cruise speed, rotor system, and wing geometric attributes must all be held fixed.

Rais-Rohani, Masoud↗