Search NASA⌕ Search

SEARCH · Search NASA

Results for “SUPERSONIC SPEED”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Evaluation of a three-dimensional empirically derived wing at supersonic speeds

A novel wing design concept is introduced which takes advantage of the existence of conical flow at supersonic speeds. The present wing design concept is to create a near conical wing geometry by redistributing airfoils in a spanwise direction. In addition, a set of graphs which review the supersonic aerodynamics of delta wings have been employed to select a design wing sweep and Mach number. An iteration through the wing design logic resulted in the selection of a 65 deg swept delta wing and a design Mach number of 1.62. Theoretical analysis was performed with a nonlinear full-potential analysis method to assess the merits of the wing design approach. The analysis showed large reductions in drag due to lift compared to delta wings configured with traditional thickness and airfoil distributions.

Wood, Richard M.↗
NASA NTRS1976

Theory of wing-body drag at supersonic speeds

The relation of Whitcomb's area rule to the linear formulas for wave drag at slightly supersonic speeds is discussed. By adopting an approximate relation between the source strength and the geometry of a wing-body combination, the wave drag theory is expressed in terms involving the areas intercepted by oblique planes or Mach planes. The resulting formulas are checked by comparison with the drag measurements obtained in wind tunnel experiments and in experiments with falling models in free air. Finally, a theory for determining wing-body shapes of minimum drag at supersonic Mach numbers is discussed and some preliminary experiments are reported.

Jones, R. T.↗
NASA NTRS1956

Theory of wing-body drag at supersonic speeds

The relation of Whitcomb's "area rule" to the linear formulas for wave drag at lightly supersonic speeds is discussed. By adopting an approximate relation between the source strength and the geometry of a wing-body combination, the wave-drag theory is expressed in terms involving the areas intercepted by oblique planes or Mach planes. The resulting formulas are checked by comparison with the drag measurements obtained in wind-tunnel experiments and in experiments with falling models in free air. Finally, a theory for determining wing-body shapes of minimum drag at supersonic Mach numbers is discussed and some preliminary experiments are reported.

Jones, Robert T↗
NASA NTRS1961

Wind-Tunnel Investigation of Paraglider Models at Supersonic Speeds

An investigation was made in the Langley Unitary Plan wind tunnel to determine the behavior of paraglider models at moderate to high supersonic speeds. The models were deployed from a sting in the supersonic stream and steady-state aerodynamic performance data were obtained. Maximum values of the lift-drag ratio were about 1.4 at a Mach number of 2.65 and about 1.2 at a Mach number of 4.65. The angles of attack over which the models could be flown were limited by unsteady behavior of the canopy.

Taylor, Robert T.↗
NASA NTRS1989

Influence of wing geometry on leading-edge vortices and vortex-induced aerodynamics at supersonic speeds

An assessment of the influence of wing geometry on wing leading-edge vortex flows at supersonic speeds is discussed as well as the applicability of various aerodynamic codes for predicting these results. A series of delta-wing wind-tunnel models were tested in the NASA Langley Research Center Unitary Plan Wind Tunnel over a Mach number range from 1.6 to 4.6. The data show that wing airfoil has a significant impact on the localized loading on the wing. The experimental data for the flat wings were compared with results from full-potential, Euler, and Parabolized Navier-Stokes (PNS) computer codes. The theoretical evaluation showed that the full-potential analysis predicted accurate results for the attached-flow (alpha = 0 deg) conditions and that the Euler and PNS analyses made reasonable predictions for both attached and separated flow conditions.

Wood, Richard M.↗
NASA NTRS1955

An Investigation of the Maximum Lift of Wings at Supersonic Speeds

This report presents the results of an exploratory investigation carried out in the Langley 9-inch supersonic tunnel to determine the maximum lift of wings operating at supersonic speeds. A variety of wing plan forms of random thickness distributions were tested at Mach numbers of 1.55, 1.90, and 2.32 and at Reynolds numbers varying between 0.74 x 10(6) and 0.27 x 10(6) at angles of attack ranging from zero up through the angle at which maximum lift occurred. Subsequent pressure-distribution tests on wings of triangular and rectangular plan forms were made at a Mach number of 2.40. The results of these tests substantiated the values of maximum lift obtained during the force tests and further showed no appreciable center-of-pressure shift over the entire angle-of-attack range.

Gallagher, James J↗
NASA NTRS1949

An NACA Vane-Type Angle-of-Attack Indicator for use at Subsonic and Supersonic Speeds

A vane-type angle-of-attack indicator suitable for measurements at both subsonic and supersonic speeds has been developed by the National Advisory Committee for Aeronautics. A brief history is given of the development, and a wind-tunnel calibration of the indicator is presented, together with a discussion of the corrections to be applied to the indicated readings.

Mitchell, Jesse L.↗
NASA NTRS1954

Wind-Tunnel Investigation at Subsonic and Supersonic Speeds of a Fighter Model Employing a Low-Aspect-Ratio Unswept Wing and a Horizontal Tail Mounted Well Above the Wing Plane - Longitudinal Stability and Control

Experimental results showing the static longitudinal-stability and control characteristics of a model of a fighter airplane employing a low-aspect-ratio unswept wing and an all-movable horizontal tail are presented. The investigation was made over a Mach number range from 0.60 to 0.90 and from 1.35 to 1.90 at a constant Reynolds number of 2.40 million, based on the wing mean aerodynamic chord. Because of the location of the horizontal tail at the tip of the vertical tail, interference was noted between the vertical tail and the horizontal tail and between the wing and the horizontal tail. This interference produced a positive pitching-moment coefficient at zero lift throughout the Mach number range of the tests, reduced the change in stability with increasing lift coefficient of the wing at moderate lift coefficients in the subsonic speed range, and reduced the stability at low lift coefficients at high supersonic speeds. The lift and pitching-moment effectiveness of the all movable tail was unaffected by the interference effects and was constant throughout the lift-coefficient range of the tests at each Mach number except 1.90.

Smith, Williard G.↗
NASA NTRS1986

An overview of the fundamental aerodynamics branch's research activities in wing leading-edge vortex flows at supersonic speeds

For the past 3 years, a research program pertaining to the study of wing leading edge vortices at supersonic speeds has been conducted in the Fundamental Aerodynamics Branch of the High-Speed Aerodynamics Division at the Langley Research Center. The purpose of the research is to provide an understanding of the factors governing the formation and the control of wing leading-edge vortices and to evaluate the use of these vortices for improving supersonic aerodynamic performance. The studies include both experimental and theoretical investigations and focus primarily on planform, thickness and camber effects for delta wings. An overview of this research activity is presented.

Miller, D. S.↗
NASA NTRS1985

Lee-side flow over delta wings at supersonic speeds

An experimental investigation of the lee-side flow on sharp leading-edge delta wings at supersonic speeds has been conducted. Pressure data were obtained at Mach numbers from 1.5 to 2.8, and three types of flow-visualization data (oil-flow, tuft, and vapor-screen) were obtained at Mach numbers from 1.7 to 2.8 for wing leading-edge sweep angles from 52.5 deg to 75 deg. From the flow-visualization data, the lee-side flows were classified into seven distinct types and a chart was developed that defines the flow mechanism as a function of the conditions normal to the wing leading edge, specifically, angle of attack and Mach number. Pressure data obtained experimentally and by a semiempirical prediction method were employed to investigate the effects of angle of attack, leading-edge sweep, and Mach number on vortex strength and vortex position. In general, the predicted and measured values of vortex-induced normal force and vortex position obtained from experimental data have the same trends with angle of attack, Mach number, and leading-edge sweep; however, the vortex-induced normal force is underpredicted by 15 to 30 percent, and the vortex spanwise location is overpredicted by approximately 15 percent.

Miller, D. S.↗
NASA NTRS1947

Results of Tests to Determine the Effect of a Conical Windshield on the Drag of a Bluff Body at Supersonic Speeds

Tests to evaluate the effect of a conical windshield on the drag of a bluff body at supersonic speeds were performed for the following configurations: a sharp nose fuselage with stabilizing fins,a blunt nose fuselage with a hemispherical shape, and a blunt nose fuselage with a conical point. Results of the drag coeeficient are described at Mach 1.0 and the greatest Mach number of 1.37.

Alexander, Sidney R.↗
NASA NTRS1956

Stability derivatives of cones at supersonic speeds

The aerodynamic stability derivatives due to pitching velocity and vertical acceleration are derived for circular cones traveling at supersonic speeds. Both first-order and a combination of first and second order potential solutions are obtained, and in calculations for the forces, no approximations are made to the tangency condition or the isentropic pressure relation. In addition, expressions for the forces, moments, and stability derivatives of arbitrary bodies of revolution are derived from Newtonian impact theory.

Tobak, Murry↗
NASA NTRS1957

A study of the motion and aerodynamic heating of missiles entering the earth's atmosphere at high supersonic speeds

A simplified analysis of the velocity and deceleration history of missiles entering the earth's atmosphere at high supersonic speeds is presented. The results of this motion analysis are employed to indicate means available to the designer for minimizing aerodynamic heating. The heating problem considered involves not only the total heat transferred to a missile by convection, but also the maximum average and local time rates of convective heat transfer.

Allen, Julian H↗
NASA NTRS1950

Use of source distributions for evaluating theoretical aerodynamics of thin finite wings at supersonic speeds

A series of publications on the source-distribution methods for evaluating the aerodynamics of thin wings at supersonic speeds is summarized, extended, and unified. Included in the first part are the deviations of: (a) the linearized partial-differential equation for unsteady flow at a substantially constant Mach number. b) The source-distribution solution for the perturbation-velocity potential that satisfies the boundary conditions of tangential flow at the surface and in the plane of the wing; and (c) the integral equation for determining the strength and the location of sources to describe the interaction effects (as represented by upwash) of the bottom and top wing surfaces through the region between the finite wing boundary and the foremost Mach wave. The second part deals with steady-state thin-wing problems. The third part of the report approximates the integral equation for unsteady upwash and includes a solution of approximate equation. Expressions are then derived to evaluate the load distributions for time-dependent finite-wing motions.

Evvard, John C↗
NASA NTRS1994

Experimental study at low supersonic speeds of a missile concept having opposing wraparound tails

A wind-tunnel investigation has been performed at low supersonic speeds (at Mach numbers of 1.60, and 2.16) to evaluate the aerodynamic characteristics of a missile concept capable of being tube launched and controlled with a simple one-axis canard controller. This concept, which features an axisymmetric body with two planar canards and four wraparound tail fins arranged in opposing pairs, must be in rolling motion to be controllable in any radial plane with the planar canards. Thus, producing a constant rolling moment that is invariant with speed and attitude to provide the motion is desirable. Two tail-fin shaping designs, one shaved and one beveled, were evaluated for their efficiency in producing the needed rolling moments, and the results showed that the shaved fins were much more desirable for this task than the beveled fins.

Allen, Jerry M.↗
NASA NTRS1976

Thin oblique airfoils at supersonic speed

Methods of thin airfoil theory have been extended to oblique or sweptback airfoils of finite aspect ratio moving at supersonic speeds. The cases considered thus far are symmetrical airfoils at zero lift having planforms bounded by straight lines. Because of the conical form of the elementary flow fields, the results are comparable in simplicity to the results of the two dimensional thin airfoil theory for subsonic speeds. In the case of untapered airfoils swept back behind the Mach cone the pressure distribution at the center section is similar to that given by the Ackeret theory for a straight airfoil. With increasing distance from the center section the distribution approaches the form given by the subsonic flow theory. The pressure drag is concentrated chiefly at the center section and or long wings a slight negative drag may appear on outboard sections.

Jones, R. T.↗