Search NASA⌕ Search

SEARCH · Search NASA

Results for “SURFACE GEOMETRY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Boosting CO 2 Electrochemical Reduction with Atomically Precise Surface Modification on Gold Nanoclusters

Thiolate-protected gold nanoclusters (NCs) are promising catalytic materials for the electrochemical CO 2 reduction reaction (CO 2 RR). In this work an atomic level modification of a Au 23 NC is made by substituting two surface Au atoms with two Cd atoms, and it enhances the CO 2 RR selectivity to 90–95 % at the applied potential between -0.5 to -0.9 V, which is doubled compared to that of the undoped Au 23 . Additionally, the Cd-doped Au 19 Cd 2 exhibits the highest CO 2 RR activity (2200 mA mg -1 at -1.0 V vs. RHE) among the reported NCs. This synergetic effect between Au and Cd is remarkable. Density-functional theory calculations reveal that the exposure of a sulfur active site upon partial ligand removal provides an energetically feasible CO 2 RR pathway. The thermodynamic energy barrier for CO formation is 0.74 eV lower on Au 19 Cd 2 than on Au 23 . Here these results reveal that Cd doping can boost the CO 2 RR performance of Au NCs by modifying the surface geometry and electronic structure, which further changes the intermediate binding energy. This work offers insights into the surface doping mechanism of the CO 2 RR and bimetallic synergism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1989

Flow visualization study of grooved surface/surfactant/air sheet interaction

The effects of groove geometry, surfactants, and airflow rate have been ascertained by a flow-visualization study of grooved-surface models which addresses the possible conditions for skin friction-reduction in marine vehicles. It is found that the grooved surface geometry holds the injected bubble stream near the wall and, in some cases, results in a 'tube' of air which remains attached to the wall. It is noted that groove dimension and the use of surfactants can substantially affect the stability of this air tube; deeper grooves, surfactants with high contact angles, and angled air injection, are all found to increase the stability of the attached air tube, while convected disturbances and high shear increase interfacial instability.

Reed, Jason C.↗
NASA NTRS1992

Estimation of effective aerodynamic roughness with altimeter measurements

A new method is presented for estimating the aerodynamic roughness length of heterogeneous land surfaces and complex landscapes using elevation measurements performed with an airborne laser altimeter and the Seasat radar altimeter. Land surface structure is characterized at increasing length scales by considering three basic landscape elements: (1) partial to complete canopies of herbaceous vegetation; (2) sparse obstacles (e.g., shrubs and trees); and (3) local relief. Measured parameters of land surface geometry are combined to obtain an effective aerodynamic roughness length which parameterizes the total atmosphere-land surface stress.

Menenti, M.↗
DOE OSTI2021

Universal signatures of Dirac fermions in entanglement and charge fluctuations

We study the entanglement entropy (EE) and charge fluctuations in models where the low-energy physics is governed by massless Dirac fermions. We focus on the response to flux insertion which, for the EE, is widely assumed to be universal, i.e., independent of the microscopic details. We provide an analytical derivation of the EE and charge fluctuations for the seminal example of graphene, using the dimensional reduction of its tight-binding model to the one-dimensional Su-Schrieffer-Heeger model. Our asymptotic expression for the EE matches the conformal field theory prediction. We show that the charge variance has the same asymptotic behavior, up to a constant prefactor. To check the validity of universality arguments, we numerically consider several models, with different geometries and numbers of Dirac cones, and either for strictly two-dimensional models or for a gapless surface mode of three-dimensional topological insulators. We also show that the flux response does not depend on the entangling surface geometry as long as it encloses the flux. Finally we consider the universal corner contributions to the EE. We show that in the presence of corners, the Kitaev-Preskill subtraction scheme provides nonuniversal, geometry-dependent results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2021

Quantifying Uncertainties in Nighttime Light Retrievals From Suomi-NPP and NOAA-20 VIIRS Day/Night Band Data

Satellite observations of nighttime lights (NTL) from Suomi-NPP and NOAA-20 VIIRS Day/Night Band data have been widely used to estimate human activities. Long-term changes such as urban development and abrupt short-term changes such as power outages have been monitored from temporal NTL acquired by satellites. While high temporal NTL variation has been found across NTL data of varying temporal scale (e.g., daily, monthly, and annual composites), the sources of measurement error and uncertainty are poorly understood. This paper quantifies the sources of VIIRS-derived NTL uncertainty due to view-illumination geometry, surface Bidirectional Reflectance Distribution Function (BRDF)/albedo, and the effects of snow cover, lunar irradiance, aerosol loading, cloud mask, vegetation, geometry, and ephemeral artifacts (e.g., the Aurora Borealis). Based on this current assessment of NASA Black Marble retrievals (VNP46, Collection V001), we found that angular and atmospheric effects dominate retrieval uncertainty. Errors introduced by upstream data inputs (e.g., a coarser nighttime snow cover flag and misclassification errors in the existing VIIRS nighttime cloud mask) were also found to impact retrieval quality. Despite these challenges, a consistent daily NTL time series record can be routinely generated from top-of-atmosphere VNP46 radiances. Key recommendations include: (1) the use of lunar-BRDF adjusted and atmospherically corrected NTL (i.e., as identified as high-quality retrievals in the VNP46 QA fields), (2) development and improvement to the VIIRS snow cover and cloud masks algorithms to accurately reflect NTL retrieval conditions, (3) characterizing seasonal variations in NTL due to vegetation and snow, (4) reducing geometric effects due to the spatial mismatch of gridded pixel and observation footprint, (5) employing angularly-consistent NTL observations from multiple VIIRS instruments (i.e., Suomi-NPP and NOAA-20) to reduce pixel-based uncertainties and address persistent data gaps, and (6) being mindful of surface-reflected radiance from aurora events at mid-to-high latitudes.

Zhuosen Wang↗
NASA NTRS2002

Triangle Geometry Processing for Surface Modeling and Cartesian Grid Generation

Cartesian mesh generation is accomplished for component based geometries, by intersecting components subject to mesh generation to extract wetted surfaces with a geometry engine using adaptive precision arithmetic in a system which automatically breaks ties with respect to geometric degeneracies. During volume mesh generation, intersected surface triangulations are received to enable mesh generation with cell division of an initially coarse grid. The hexagonal cells are resolved, preserving the ability to directionally divide cells which are locally well aligned.

Aftosmis, Michael J.↗
NASA NTRS1987

Experimental and numerical analyses of laminar boundary-layer flow stability over an aircraft fuselage forebody

Fuelled by a need to reduce viscous drag of airframes, significant advances have been made in the last decade to design lifting surface geometries with considerable amounts of laminar flow. In contrast to the present understanding of practical limits for natural laminar flow over lifting surfaces, limited experimental results are available examining applicability of natural laminar flow over axisymmetric and nonaxisymmetric fuselage shapes at relevantly high length Reynolds numbers. The drag benefits attainable by realizing laminar flow over nonlifting aircraft components such as fuselages and nacelles are shown. A flight experiment to investigate transition location and transition mode over the forward fuselage of a light twin engine propeller driven airplane is examined.

Vijgen, Paul M. H. W.↗
NASA NTRS1994

Clean assembly and integration techniques for the Hubble Space Telescope High Fidelity Mechanical Simulator

A mechanical simulator of the Hubble Space Telescope (HST) Aft Shroud was built to perform verification testing of the Servicing Mission Scientific Instruments (SI's) and to provide a facility for astronaut training. All assembly, integration, and test activities occurred under the guidance of a contamination control plan, and all work was reviewed by a contamination engineer prior to implementation. An integrated approach was followed in which materials selection, manufacturing, assembly, subsystem integration, and end product use were considered and controlled to ensure that the use of the High Fidelity Mechanical Simulator (HFMS) as a verification tool would not contaminate mission critical hardware. Surfaces were cleaned throughout manufacturing, assembly, and integration, and reverification was performed following major activities. Direct surface sampling was the preferred method of verification, but access and material constraints led to the use of indirect methods as well. Although surface geometries and coatings often made contamination verification difficult, final contamination sampling and monitoring demonstrated the ability to maintain a class M5.5 environment with surface levels less than 400B inside the HFMS.

Hughes, David W.↗
DOE OSTI2021

Geometry and dynamics of passive scalar structures in compressible turbulent mixing

We present a structure-based numerical analysis of passive scalar mixing in decaying homogeneous isotropic turbulence (DHIT) and shock-turbulence interaction canonical configurations. The analysis focuses on the temporal evolution of ensembles of passive scalar structures, initialized as spheres of different sizes relative to the Taylor microscale. An algorithm is introduced to track the evolution of each individual structure and the interactions with other structures in the ensemble, relating changes in the surface geometry and the underlying physical processes (turbulent transport, scalar dissipation, and shock compression). The tracking algorithm is applied to datasets from shock-capturing direct numerical simulations of DHIT, with Taylor microscale Reynolds number Re λ =40 and turbulence Mach number M t =0.2 ⁠, and STI cases in which the turbulence is processed by a shock wave at Mach numbers M = 1.5 and 3.0. Temporal surface convolution increases for initially larger structures, resulting in a higher probability of locally hyperbolic geometries where breakup into smaller structures occurs. Shock-induced deformation of the structures amplifies breakup processes, enhancing mixing, particularly for larger structures. Mixing enhancement by the shock is manifested as an amplification of the surface-averaged scalar gradient, which increases for initially larger structures. The alignment between the scalar gradient and the most extensional strain-rate eigendirection on the scalar isosurfaces also increases across the shock. Larger magnitudes of the scalar gradient and its alignment with the most compressive strain-rate eigendirection correlate with flatter surface regions. Shock-induced structure compression increases the area coverage of flat regions, where the amplification of scalar gradient is localized.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1975

QUICK-GEOMETRY, a rapid response method for mathematically modeling configuration geometry

The philosophy, development, and various applications of the QUICK-GEOMETRY system were outlined. This system provides a practical method for developing the geometry models that are essential to the operation of computer-based design and manufacturing systems. Of particular interest are the various methods for modeling surface geometry that are used by aerodynamic analysis codes.

Vachris, A. F., Jr.↗
NASA NTRS2003

Contributions of the NASA Langley Research Center to the DARPA/AFRL/NASA/ Northrop Grumman Smart Wing Program

An overview of the contributions of the NASA Langley Research Center (LaRC) to the DARPA/AFRL/NASA/ Northrop Grumman Corporation (NGC) Smart Wing program is presented. The overall objective of the Smart Wing program was to develop smart** technologies and demonstrate near-flight-scale actuation systems to improve the aerodynamic performance of military aircraft. NASA LaRC s roles were to provide technical guidance, wind-tunnel testing time and support, and Computational Fluid Dynamics (CFD) analyses. The program was divided into two phases, with each phase having two wind-tunnel entries in the Langley Transonic Dynamics Tunnel (TDT). This paper focuses on the fourth and final wind-tunnel test: Phase 2, Test 2. During this test, a model based on the NGC Unmanned Combat Air Vehicle (UCAV) concept was tested at Mach numbers up to 0.8 and dynamic pressures up to 150 psf to determine the aerodynamic performance benefits that could be achieved using hingeless, smoothly-contoured control surfaces actuated with smart materials technologies. The UCAV-based model was a 30% geometric scale, full-span, sting-mounted model with the smart control surfaces on the starboard wing and conventional, hinged control surfaces on the port wing. Two LaRC-developed instrumentation systems were used during the test to externally measure the shapes of the smart control surface and quantify the effects of aerodynamic loading on the deflections: Videogrammetric Model Deformation (VMD) and Projection Moire Interferometry (PMI). VMD is an optical technique that uses single-camera photogrammetric tracking of discrete targets to determine deflections at specific points. PMI provides spatially continuous measurements of model deformation by computationally analyzing images of a grid projected onto the model surface. Both the VMD and PMI measurements served well to validate the use of on-board (internal) rotary potentiometers to measure the smart control surface deflection angles. Prior to the final entry, NASA LaRC also performed three-dimensional unstructured Navier Stokes CFD analyses in an attempt to predict the potential aerodynamic impact of the smart control surface on overall model forces and moments. Eight different control surface shapes were selected for study at Mach = 0.6, Reynolds number = 3.25 x 10(exp 6), and + 2 deg., 3 deg., 8 deg., and 10 deg.model angles-of-attack. For the baseline, undeflected control surface geometry, the CFD predictions and wind-tunnel results matched well. The agreement was not as good for the more complex aero-loaded control surface shapes, though, because of the inability to accurately predict those shapes. Despite these results, the NASA CFD study served as an important step in studying advanced control effectors.

Florance, Jennifer P.↗
NASA NTRS1992

TIGER: Turbomachinery interactive grid generation

A three dimensional, interactive grid generation code, TIGER, is being developed for analysis of flows around ducted or unducted propellers. TIGER is a customized grid generator that combines new technology with methods from general grid generation codes. The code generates multiple block, structured grids around multiple blade rows with a hub and shroud for either C grid or H grid topologies. The code is intended for use with a Euler/Navier-Stokes solver also being developed, but is general enough for use with other flow solvers. TIGER features a silicon graphics interactive graphics environment that displays a pop-up window, graphics window, and text window. The geometry is read as a discrete set of points with options for several industrial standard formats and NASA standard formats. Various splines are available for defining the surface geometries. Grid generation is done either interactively or through a batch mode operation using history files from a previously generated grid. The batch mode operation can be done either with a graphical display of the interactive session or with no graphics so that the code can be run on another computer system. Run time can be significantly reduced by running on a Cray-YMP.

Soni, Bharat K.↗
DOE OSTI2023

Signatures of Cooper pair dynamics and quantum-critical superconductivity in tunable carrier bands

Different superconducting pairing mechanisms are markedly distinct in the underlying Cooper pair kinematics. Quantum-critical soft modes drive pairing interactions in which the pair scattering processes are highly collinear and can be classified into two categories: forward scattering and backscattering. Conversely, in conventional phonon mechanisms, Cooper pair scattering is of a generic noncollinear character. In this study, we present a method to discern the kinematic type by observing the evolution of superconductivity while adjusting the Fermi surface geometry. To demonstrate our approach, we utilize the recently reported phase diagrams of untwisted graphene multilayers. Our analysis connects the emergence of superconductivity at “ghost crossings” of Fermi surfaces in distinct valleys to the pair kinematics of a backscattering type. Together with the observed nonmonotonic behavior of superconductivity near its onset (sharp rise followed by a drop), it lends strong support to a particular quantum-critical superconductivity scenario in which pairing is driven by intervalley coherence fluctuations. These findings offer direct insights into the genesis of pairing in these systems, providing compelling evidence for the electron–electron interactions driving superconductivity. More broadly, our work highlights the potential of tuning bands via ghost crossings as a promising means of boosting superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Passive Freeze-Out of the Richtmyer-Meshkov Instability

The Richtmyer-Meshkov instability (RMI) poses a major challenge in inertial confinement fusion (ICF) due to its role in mixing and performance degradation. We report the first experimental observation of passive freeze-out of RMI in a low-pressure surrogate regime, an instability stagnation effect induced without modifying the driving pressure pulse or the target surface geometry. Using additively manufactured subsurface voids in a sinusoidal target, we convert a single shock into a sequence of weaker shocks that suppress instability growth upstream of the surface by over 70%. High-speed x-ray imaging and hydrodynamic simulations suggest that this suppression arises primarily from temporal shaping, with lesser contributions from spatial curvature and shock weakening. Our results demonstrate a driver-independent pathway for controlling shock-driven hydrodynamic instabilities relevant to ICF and other high energy density systems.

Materials science↗
NASA NTRS1973

Effect of Subsonic Inlet Lip Geometry on Predicted Surface and Flow Mach Number Distributions

The effect of subsonic inlet lip geometry on predicted surface and flow Mach number distributions is illustrated. The theoretical results were obtained from incompressible potential flow calculations corrected for compressibility. The major emphasis of this investigation is on the low-speed (takeoff and landing) operating conditions. The low-speed results were obtained for a range of three geometric variables of interest: contraction ratio, defined as the ratio of highlight area to throat area; internal lip major - to minor-axis ratio; and internal lip shape. The low-speed results were obtained at both static conditions and a free-stream velocity of 42.6m/sec, with incidence angles ranging from 0 deg to 50 deg. The results indicate that of the three geometric variables considered, contraction ratio had the largest effect on the surface Mach number distributions. The effects of inlet diameter ratio and blunting of the external forebody on maximum external surface Mach numbers are illustrated at a cruise Mach number of 0.8.

Albers, J. A.↗
NASA NTRS1983

Evaluation of LANDSAT-4 TM and MSS ground geometry performance without ground control

LANDSAT thematic mapper P-data of Washington, D.C., Harrisburg, PA, and Salton Sea, CA were analyzed to determine magnitudes and causes of error in the geometric conformity of the data to known earth-surface geometry. Several tests of data geometry were performed. Intra-band and inter-band correlation and registration were investigated, exclusive of map-based ground truth. Specifically, the magnitudes and statistical trends of pixel offsets between a single band's mirror scans (due to processing procedures) were computed, and the inter-band integrity of registration was analyzed.

Bryant, N. A.↗
NASA NTRSDate not supplied

Testing of Mars Retropropulsion Concepts in the Langley Unitary Plan Wind Tunnel

Future Mars human lander missions will require using retrorockets beginning at supersonic conditions, something which has never been done before at Mars. Significant aerosciences challenges exist due to interactions between the retrorocket exhaust plumes, the freestream flow, and the vehicle that alter the aerodynamic behavior. Historical retropropulsion ground and flight data do not provide a basis for calibrating the computational uncertainties for aerodynamic interference forces and moments on proposed Mars descent vehicles, either because of insufficient data or dissimilar vehicles geometries and/or conditions. A new retropropulsion wind tunnel test was conducted in the NASA Langley Unitary Plan Wind Tunnel in order to address some of the deficiencies of previous tests and to provide a basis for computational model comparisons on relevant geometries. The test included improvements in model design and measured data. Two sub-scale model geometries derived from full-scale vehicle concepts were tested: a blunt low lift-to-drag vehicle and a more slender geometry. The first model includes variations in nozzle parameters that were estimated to have first-order effects on the measurements: location, pointing direction, size, and exit-to-throat area ratio. Both models were instrumented with discrete steady and unsteady pressure sensors on the aerodynamic and interior flow path surfaces. The heats shields of both models also were covered with pressure sensitive paint that effectively measures a steady pressure distribution in an otherwise unsteady flow field. This pressure distribution was integrated over the surface geometry in order to estimate the steady aerodynamic force and moment coefficient contribution from the painted surfaces; this approach was used as a replacement for using a flow-through balance. This paper will cover the test objectives, model design, test matrix, and available test results for each model configuration at different freestream Mach numbers, model attitude, and non-dimensional thrust magnitude. A subsequent publication will cover uncertainty quantification of the test data and comparisons to computational fluid dynamics model results.

Powered Descent↗