SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The design of space probes for Saturn and Uranus and the effects of imposing planetary quarantine constraints on that design are discussed. Special attention was given to probability of contamination and procedures for eliminating contamination including dry heat.
NASA's Solar System Exploration Committee has proposed the Mariner Mark II concept for the next generation of deep-space planetary observation missions, which will yield Voyager- and Galileo-quality focused data sets at a fraction of the costs associated with those spacecraft. Cost-limiting strategies under consideration include the use of reconfigurable designs, a multimission ground support system, and the incorporation of such selected new technologies as an all-X band telemetry system, fiber-optic rate sensors for use as an inertial reference system, image compression, and electronic and optical disk data distribution. It is believed possible to meet cost goals of 150-300 million/mission. The missions under consideration are comet rendezvous and sample return, main belt asteroid flybys, and orbits, flybys and probes of Saturn, Titan, Neptune and Uranus.
An economic and performance comparison is made of spacecraft telecommunication links at 8.415, 32.0, and 565646 GHz (0.53-micron wavelength) for the return of 3.43 x 10 to the 11th power bits from a Saturn Orbiter/Titan Probe mission in year 2000. Technical performance and costs for both ends of the links are included. Spacecraft antenna or telescope efficiencies, pointing losses, ground-based or Earth-orbiting relay terminals efficiencies, noise temperatures, recurring and nonrecurring engineering, and maintenance and operations costs are modeled. Weather effects, dc-to-RF or laser power conversion efficiencies, gravity and other environment distortions gain reductions, and the cost of pointing and tracking are analyzed. The effort is focused primarily on the microwave frequency links. There are large uncertainties in the cost results, but conclusions indicate that for a mid-1990's launch, the Ka-band system is as cost effective as X-band. The Ka-band system has a data rate advantage as compared to the X-band system for the same dc power input to the spacecraft. The magnitude of the advantage is a complex function of the weather at the DSN stations and the elevation angle of the ground antenna. A simple numerical comparison of the advantage is difficult and curves are provided. The optical frequency link is more costly based on the launch-to-orbit costs for the orbiting terminal. A more detailed study of the optical system is recommended to quantify astrometric tracking benefits and improve the accuracy of the cost estimate.
The near flyby of Saturn's moon Titan by Voyager 1 revealed a Venus-like interaction between the moon and Saturn's magnetospheric plasma. Although neither the radio science experiment occultation observation nor the in-situ measurements directly detected the ionosphere, plasma of ionospheric origin was observed as Voyager 1 passed through Titan's wake. Balancing the magnetic pressure in this low-beta region of Saturn's magnetosphere with ionospheric particle pressure yields an upper limit on the ionospheric density. Using an ionospheric temperature equal to the exospheric temperature of 200 K yields a charge density of about 3000/cu cm, which is consistent with the peak ionospheric electron density inferred from a balance of electron impact ionization of molecular nitrogen and recombination loss. Both of these quantities are consistent with limits derived from Voyager 1 observations. Good constraints on these quantities are important in planning the Cassini mission to orbit Saturn and probe Titan's ionosphere and atmosphere at the beginning of the next century.
Two successive journeys will soon offer a perspective on the origin of the solar system and perhaps provide clues on the origin of life as well. The missions, the Comet Rendezvous Asteroid Flyby (CRAF) and Cassini (the Saturn orbiter/Titan probe), combine to form the first initiative of the Mariner Mark 2 program, a series of planetary missions whose common objective is to explore primitive bodies and the outer solar system, toward the ultimate goal of understanding the nature of our origins. Cassini and CRAF are exciting planetary missions. The objectives that they share, the region of the solar system in which comets, asteroids, and the Saturnian system have evolved and now reside, and the spacecraft that will carry both sets of experiments to their targets in the outer solar system are described.
Field and laboratory measurements of species of atmospheric interest made as part of the JPL diode laser spectroscopy program are presented. Stratospheric measurements of NO2, NO, CO2, and H2O made in November 1985 using the BLISS instrument are reported, together with recent laboratory measurements of spectral line parameters of HNO3 and HO2NO2. In addition, a novel diode laser instrument concept for the in situ sensing of Titan's atmosphere is described for the Saturn Orbiter/Titan Probe (SOTP) Cassini Mission.
The Comet Rendezvous Asteroid Flyby (CRAF) mission was approved for a New Start by the United States Congress in 1989. CRAF will be developed in parallel with the Cassini (Saturn orbiter/Titan probe) mission. The two missions have been combined into a joint program because of the substantial cost savings (approximately $500 M, or greater than 25 percent) which can be realized by using a common spacecraft design, several identical science instruments, a single management team, and a joint ground operations and data handling system for the two missions. CRAF and Cassini will be the first users of the new Mariner Mark 2 spacecraft which has been designed to carry out the next generation of planetary missions to the outer planets and to small bodies. CRAF is a joint mission between the United States, Germany, and Italy. Each partner will provide both engineering hardware and science experiments. Cassini is a joint mission between the United States, Germany, Italy, and the European Space Agency (ESA), with ESA providing the Titan atmospheric entry probe, called Huygens.
The computer programs developed at NASA Ames Research Center for TPS sizing computation have been applied to many NASA's space missions, such as Mars Pathfinder, StarDust, Mars 2001, DS-II, and Saturn Entry Probe. These computer programs include FIAT (Fully Implicit Ablation and Thermal Response Program, MAT (Multi-component Ablation Thermochemistry Program), TPSX (Thermal Protection Systems Expert & Material Properties Database), and TPSGui (Thermal Protection Systems Graphical User Interface). For most planetary missions, the aerothermodynamics and material response are strongly coupled; thus a closed loop iteration technique between the FIAT and CFD (Computational Fluid Dynamics) codes has been developed to obtain the high fidelity bench mark TPS sizing solution. The computer codes and predictive methods are presented and discussed in detail.
This paper summarizes the first round of orbit determination analysis accomplished as part of navigation studies for the Cassini mission.
Mass spectrometers have been included in the payloads of several deep space missions over the past three decades. Our laboratory has designed and developed mass spectrometers for the Galileo Probe into the atmosphere of Jupiter, the Pioneer Venus Orbiter, the Cassini Orbiter Mission to Saturn, the Cassini/Huygens Probe Mission to Saturn's moon Titan, the Nozomi Mission to Mars, and most recently the CONTOUR comet nucleus flyby mission. Each mission has required attention to miniaturization, autonomous sampling, and consideration of the special hazards and measurement requirements of the target environment. Development ongoing in our laboratory includes further miniaturization, improved performance in the areas of sensitivity and precision for the important isotope measurements, and adaptation for the unusual environments to be encountered in locations such as the surface or subsurface of Europa or Mars. Various aspects of both the technical implementation of these delivered and planned experiments and the science drivers will be described.
While the HEEET project established the dual-layer, 3-D Woven TPS at TRL 6 for extreme entry environment missions such as Saturn and Ice-Giant Probe missions, subsequent to the completion of HEEET project in 2018, further development was undertaken to assess the viability of a variant of the 3-D Woven, a single, insulating layer alone as a viable TPS for Mars Sample Return mission. MSR Earth Entry System (EES) baselined it and named the TPS as 3D, mid-density, carbon-phenolic (3MDCP). MSR program invested in building a new loom and the weaver T.E.A.M. Inc is currently weaving 80” wide 1.2” thick insulating layer. Unlike HEEET, where a set of tiles and seams are integrated to form the heat-shield, 3MDCP is a seamless heatshield by wrapping and shaping a flat panel into the heatshield shape and then rigidizing the preform through resin infusion. MSR EES is investing in technology maturation of 3MDCP for the current mission launch in 2027. This lighting talk will provide key developments and time line for 3MDCP technology maturation to show that 3MDCP will be ready to support future UOP or Saturn Probe mission. In addition, the limitations of the capability will be presented so that Saturn mission proposers as well as UOP flagship mission study can be fully informed as to the 3MDCP capability.
The Huygens probe arrived at Saturn's moon Titan on January 14, 2005, unveiling a world that is radically different from any other in the Solar system. The data obtained, complemented by continuing observations from the Cassini spacecraft, show methane lakes, river channels and drainage basins, sand dunes, cryovolcanos and sierras. This has lead to an enormous scientific interest in a follow-up mission to Titan, using a robotic lighter-than-air vehicle (or aerobot). Aerobots have modest power requirements, can fly missions with extended durations, and have very long distance traverse capabilities. They can execute regional surveys, transport and deploy scientific instruments and in-situ laboratory facilities over vast distances, and also provide surface sampling at strategic science sites. This paper describes our progress in the development of the autonomy technologies that will be required for exploration of Titan. We provide an overview of the autonomy architecture and some of its key components. We also show results obtained from autonomous flight tests conducted in the Mojave desert.
Electronic components and systems capable of low-temperature operation are needed for many future NASA missions where it is desirable to have smaller, lighter, and cheaper (unheated) spacecraft. These missions include Mars (-20 to -120 C) orbiters, landers, and rovers; Europa (-150 C) oceanic exploratory probes and instrumentation; Saturn (-183 C) and Pluto (-229 C) interplanetary probes. At the present, most electronic equipment can operate down to only -55 C. It would be very desirable to have electronic components that expand the operating temperature range down to -233 C. The successful development of these low-temperature components will eventually allow space probes and onboard electronics to operate in very cold environments (out as far as the planet Pluto). As a result, radioisotope heating units, which are used presently to keep space electronics near room temperature, will be reduced in number or eliminated. The new cold electronics will make spacecraft design and operation simpler, more flexible, more reliable, lighter, and cheaper. Researchers at the NASA Glenn Research Center are evaluating potential commercial off-the- shelf devices and are developing new electronic components that will tolerate operation at low temperatures down to -233 C. This work is being carried out mainly inhouse and also through university grants and commercial contracts. The components include analog-to-digital converters, semiconductor switches, capacitors, dielectric and packaging material, and batteries. For example, the effect of low temperature on the capacitance of three different types of capacitors is shown in the graph. Using these advanced components, system products will be developed, including dc/dc converters, battery charge/discharge management systems, digital control electronics, transducers, and sensor instrumentation.
The adaptation of the Saturn-Uranus Atmospheric Entry Probe (SUAEP) to a Jupiter entry probe is summarized. This report is extracted from a comprehensive study of Jovian missions, atmospheric model definitions and probe subsystem alternatives.
Requirements for Pioneer 10 and 11 designs are provided that are adequate to carry the probes for Jupiter and Saturn explorations. For a Uranus probe mission, additional spacecraft modifications are necessary. Considered are weight availability for carrying the probe, aspects of probe to bus link communications and onboard navigation.
The mission goals, control parameters, and instrumentation for the Galileo entry probe are described. The goal for the probe is to penetrate the Jovian atmosphere to 10 bars, begin data gathering and transmission at about 0.1 bar, and make as many in-situ cloud measurements as possible. The probe will pass through a 16,000 K shock layer, which has led to a ratio of 5 kg of heat shield to every kg of instrumentation on the probe. An entry angle between -7.0 to -10.2 deg will be used, and possible targets with respect to declinations associated with a 1986 launch are discussed. The preentry mission phase, entry/descent sequence, and the baseline mission relay link performance are outlined. Data may be available down to 20 bars, and the probe performance will aid in design goals for subsequent Saturn and Uranus probes.
The main objectives of the Cassini mission are to deliver a spacecraft into orbit about Saturn and a Probe into the atmosphere of Titan. Two fundamental constraints drive the design of the initial Saturn orbit and thus affect the mission performance. The first requirement is safe passage through the ring system upon Saturn arrival; the second is delivery of the Probe to Titan with an acceptable relative approach velocity. These constraints lead to the selection of a dual-burn insertion strategy, with maneuvers at periapsis and apoapsis of the initial orbit. Additional science goals constrain the Saturn arrival date and may affect the timing of the orbit insertion burn.
Suitability of Saturn IB/Centaur and Atlas/ Centaur launched solar-electric propulsion vehicles for performing 0.1-AU solar probe mission