Selective Hydrogenation of Furfural Acetone over a Cu Catalyst: Combined Theoretical and Experimental Study
The selective hydrogenation of biomass-derived hydroxymethyl furfural (HMF)-acetone-HMF (HAH) presents an alternative route to producing highly functionalized polyesters and polyurethanes. While HAH undergoes furan ring hydrogenation over Pd, Ru, and Ni catalysts, furan ring hydrogenation is not observed over Cu. Herein, we combine reaction kinetics experiments and density functional theory calculations to elucidate the selective hydrogenation behavior of HAH over Cu catalysts. We identified furfural acetone (FAc) as a suitable surrogate for modeling HAH hydrogenation over Cu surfaces and performed reaction kinetics experiments between temperatures of 313–393 K and a H 2 partial pressure of 55 bar. Similar to the behavior of HAH, hydrogenation of FAc follows a consecutive two-step hydrogenation pathway over Cu and does not undergo furan ring hydrogenation. The apparent activation energy barriers for hydrogenation of the aliphatic double bond (0.58 eV) and carbonyl (0.43 eV) of FAc measured in a continuous flow reactor setup are consistent with those reported in prior studies for batch HAH hydrogenation. Reaction orders with respect to each reactant, including H 2 and FAc, were determined to be nearly one. Density functional theory (DFT; GGA-PBE-D3) calculations on Cu(111) showed that the hydrogenation of the aliphatic double bond of FAc is more facile than the hydrogenation of the furan ring, which displays weak interactions with the Cu surface. We determined an apparent activation energy barrier for FAc hydrogenation (0.58 eV) that agreed with our DFT predictions (highest barrier for FAc hydrogenation of 0.57 eV). Finally, our DFT calculations further show that weak interactions between the furan ring and Cu surface are responsible for the selective hydrogenation behavior.