Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sensitivity Matrix”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Evidence of off-shell Higgs boson production from ZZ leptonic decay channels and constraints on its total width with the ATLAS detector

This Letter reports on a search for off-shell production of the Higgs boson using 139 fb —1 of $pp$ collision data at $\sqrt{s}$ = 13 TeV collected by the ATLAS detector at the Large Hadron Collider. The signature is a pair of $\overline{Z}$ bosons, with contributions from both the production and subsequent decay of a virtual Higgs boson and the interference of that process with other processes. The two observable final states are $\overline{Z}$ $\overline{Z}$ → 4$\ell$ and $\overline{Z}$ $\overline{Z}$ → 2$\ell$2$ν$ with $\ell$ = $e$ or $μ$. In the $\overline{Z}$ $\overline{Z}$ → 4$\ell$ final state, a dense Neural Network is used to enhance analysis sensitivity with respect to matrix element-based discrimination. The backgroundonly hypothesis is rejected with an observed (expected) significance of 3.3 (2.2) standard deviations, representing experimental evidence for off-shell Higgs boson production. Assuming that no new particles enter the production of the virtual Higgs boson, its total width can be deduced from the measurement of its off-shell production cross-section. The measured total width of the Higgs boson is ${4.5}_{—2.5}^{+3.3}$ MeV, and the observed (expected) upper limit on the total width is found to be 10.5 (10.9) MeV at 95% confidence level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Microenvironment rigidity modulates responses to the HER2 receptor tyrosine kinase inhibitor lapatinib via YAP and TAZ transcription factors

Stiffness is a biophysical property of the extracellular matrix that modulates cellular functions, including proliferation, invasion, and differentiation, and it also may affect therapeutic responses. Therapeutic durability in cancer treatments remains a problem for both chemotherapies and pathway-targeted drugs, but the reasons for this are not well understood. Tumor progression is accompanied by changes in the biophysical properties of the tissue, and we asked whether matrix rigidity modulated the sensitive versus resistant states in HER2-amplified breast cancer cell responses to the HER2-targeted kinase inhibitor lapatinib. The antiproliferative effect of lapatinib was inversely proportional to the elastic modulus of the adhesive substrata. Down-regulation of the mechanosensitive transcription coactivators YAP and TAZ, either by siRNA or with the small-molecule YAP/TEAD inhibitor verteporfin, eliminated modulus-dependent lapatinib resistance. Reduction of YAP in vivo in mice also slowed the growth of implanted HER2-amplified tumors, showing a trend of increasing sensitivity to lapatinib as YAP decreased. Thus we address the role of stiffness in resistance to and efficacy of a HER2 pathway–targeted therapeutic via the mechanotransduction arm of the Hippo pathway.

59 BASIC BIOLOGICAL SCIENCES↗

Measurement of the WW+WZ Production Cross Section Using the lepton+jets Final State at CDF II

We report two complementary measurements of the WW+WZ cross section in the final state consisting of an electron or muon, missing transverse energy, and jets, performed using pp collision data at sq root(s)=1.96 TeV collected by the CDF II detector. The first method uses the dijet invariant mass distribution while the second more sensitive method uses matrix-element calculations. The result from the second method has a signal significance of 5.4{sigma} and is the first observation of WW+WZ production using this signature. Combining the results gives {sigma}{sub WW+WZ}=16.0+-3.3 pb, in agreement with the standard model prediction.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Consistent Data Assimilation of Isotopes: 242 Pu and 105 Pd

In this annual report we illustrate the methodology of the consistent data assimilation that allows to use the information coming from integral experiments for improving the basic nuclear parameters used in cross section evaluation. A series of integral experiments are analyzed using the EMPIRE evaluated files for 242 Pu and 105 Pd. In particular irradiation experiments (PROFIL-1 and -2, TRAPU-1, -2 and -3) provide information about capture cross sections, and a critical configuration, COSMO, where fission spectral indexes were measured, provides information about fission cross section. The observed discrepancies between calculated and experimental results are used in conjunction with the computed sensitivity coefficients and covariance matrix for nuclear parameters in a consistent data assimilation. The results obtained by the consistent data assimilation indicate that not so large modifications on some key identified nuclear parameters allow to obtain reasonable C/E. However, for some parameters such variations are outside the range of 1 s of their initial standard deviation. This can indicate a possible conflict between differential measurements (used to calculate the initial standard deviations) and the integral measurements used in the statistical data adjustment. Moreover, an inconsistency between the C/E of two sets of irradiation experiments (PROFIL and TRAPU) is observed for 242 Pu. This is the end of this project funded by the Nuclear Physics Program of the DOE Office of Science. We can indicate that a proof of principle has been demonstrated for a few isotopes for this innovative methodology. However, we are still far from having explored all the possibilities and made this methodology to be considered proved and robust. In particular many issues are worth further investigation: • Non-linear effects, • Flexibility of nuclear parameters in describing cross sections, • Multi-isotope consistent assimilation, and • Consistency between differential and integral experiments.

105 Pd↗

New Types of Ionization Sources for Mass Spectrometry

The purpose of this Cooperative Research and Development Agreement (CRADA) between UT-Battelle (Contractor) and MDS Sciex (Participant) and ESA, Inc. (Participant) is to research, develop and apply new types of ionization sources and sampling/inlet systems for analytical mass spectrometry making use of the Participants state-of-the-art atmospheric sampling mass spectrometry electrochemical cell technology instrumentation and ancillary equipment. The two overriding goals of this research project are: to understand the relationship among the various instrumental components and operational parameters of the various ion sources and inlet systems under study, the chemical nature of the gases, solvents, and analytes in use, and the nature and abundances of the ions ultimately observed in the mass spectrometer; and to develop new and better analytical and fundamental applications of these ion sources and inlet systems or alternative sources and inlets coupled with mass spectrometry on the basis of the fundamental understanding obtained in Goal 1. The end results of this work are expected to be: (1) an expanded utility for the ion sources and inlet systems under study (such as the analysis of new types of analytes) and the control or alteration of the ionic species observed in the gas-phase; (2) enhanced instrument performance as judged by operational figures-of-merit such as dynamic range, detection limits, susceptibility to matrix signal suppression and sensitivity; and (3) novel applications (such as surface sampling with electrospray) in both applied and fundamental studies. The research projects outlined herein build upon work initiated under the previous CRADA between the Contractor and MDS Sciex on ion sources and inlet systems for mass spectrometry. Specific ion source and inlet systems for exploration of the fundamental properties and practical implementation of these principles are given.

47 OTHER INSTRUMENTATION↗

Fully-Coupled Metallic Fuel Performance Simulations using BISON

This document is a set of slides intended to accompany a talk at a meeting. The first topic taken up is zirconium redistribution. The rod edge Zr increase is evidently due to the Soret term and temperature gradient. Then metallic fission gas release modeling is considered. Based on a GRSIS/FEAST model, the approach of generating fission gas in the fuel matrix is described. A sensitivity study on parameters is presented, including sodium bond & diffusion coefficient sensitivity along with dt sensitivity. Finally, results of some coupled simulations are shown, with ideas about future work.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Accelerated Dissolution Process of the Spent Fuel (UO{sub 2}) under Repository Conditions

Nowadays, nuclear energy is one of the options for developed countries in order to maintain the demand of electric energy. One of the key problems associated with kind of energy generation is the residual waste formed after a fuel cycle (spent nuclear fuel). The thermal treatment received in the reactor and there composition renders these materials very difficult to characterize and thus exhaustive studies are required to obtain knowledge that will help to build a complete, reliable and very safety underground facility. In this way, the option known as the Deep Geological Repository (DGR) is under development by each country taking part in the nuclear energy industry. The unique pathway for the migration to the biosphere of the radionuclide, actinide and lanthanides content in the spent fuel pellet (UO{sub 2}) after the closing of the deep geological repository is by a water transport phenomena. It is a fundamental question to know how much time they will spend on their trip and the first step is the rate of liberation of these radionuclides from the spent fuel pellet. In this way the matrix dissolution rate of the spent fuel pellet, which is not dependent on the specific surface area after normalization by the initial value is a key parameter to begin the performance assessment for any deep geological repository. The specific surface value is, following the Matrix Alteration Model (MAM) sensitivity analysis, one of the most important parameters controlling the radionuclides liberation. In this way, several measurements were carried out to obtain values in different conditions for different sieves of UO{sub 2} powder treated as fresh fuel. First of all, the specific surface area was measured with a multi-point isothermal procedure with N{sub 2} and Kr for both. The values obtained are presented in order to obtain a general law for the rate of evolution with the particle size. These data are part of a bigger project about the complete description of the spent fuel analogues, which are very useful for obtaining new dissolution rates for spent nuclear fuel under repository simulated conditions. (authors)

36 MATERIALS SCIENCE↗

Uncertainty quantification for competing failure mechanisms in unidirectionally reinforced carbon–carbon composites

Microstructure-informed finite element models play a key role in the carbon–carbon composite design process. Variability in manufacturing process parameters and experimental limitations introduce model parameter uncertainty. This study quantifies the effect of model parameter uncertainty on transverse tensile fracture behavior and proposes a methodology to predict the failure mode based on competing microscale damage mechanisms. Finite element simulations incorporate fiber–matrix interface debonding with cohesive zones and matrix damage with a smeared crack band approach in a unidirectional carbon–carbon composite. Results from a variance-based global sensitivity analysis identifies interfacial and matrix damage parameters as the primary source of variability in fracture behavior. Sobol’ indices indicate that matrix and cohesive zone strengths contribute 94% of the variance in the effective ultimate stress. A local analysis elucidates the relationship between these constituent strength parameters and failure mode by estimating the probability of cohesive, matrix, and mixed-mode dominated failure. Based on the results for 4000 simulations, 93% exhibit mixed-mode or interfacial dominated failure, which underscores the crucial role of fiber–matrix interface debonding in the transverse tensile failure of carbon–carbon composites. These uncertainty quantification results facilitate more efficient model calibration and provide a framework for microstructure-informed failure predictions in the face of manufacturing-induced uncertainty.

36 MATERIALS SCIENCE↗

Strongly enhanced tunable photoluminescence in polymorphous silicon carbon thin films via excitation-transfer mechanism

Here, we investigate the enhanced tunable photoluminescence (PL) of hydrogenated polymorphous silicon carbon (pm-Si{sub 1-x}C{sub x}:H) thin films fabricated in a plasma enhanced chemical vapor deposition system. The silicon nanocrystal (nc-Si) inclusions are formed during gas-phase nucleation and incorporated in the hydrogenated amorphous silicon carbon (a-SiC:H) matrix. The nc-Si provides high-quality recombination centers for the photogenerated carriers in the pm-Si{sub 1-x}C{sub x}:H material, while the a-SiC:H matrix plays a role of sensitizer. We elucidate and provide experimental evidence for this excitation-transfer mechanism. Strongly enhanced PL performance can be achieved by effective matrix passivation that favors a diffusion-driven carrier recombination in the nc-Si centers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Statistical uncertainty of fission matrix eigenvalues using perturbation theory

Eigenvalue search of high dominance ratio systems may be slow to converge. The fission matrix element is defined by its element (FM){sub ij}, which are the probability for a neutron born in cell i to create a fission in cell j for a spatial mesh of n{sub i}*n{sub j} elements. Fission matrices are used in Monte Carlo criticality simulations to enhance computing speed, but also to find higher order eigenvalues. However, few studies have been made on the link between statistical uncertainties of fission matrix elements and eigenvalues uncertainties. Thus, dominance ratio statistical uncertainties remain unknown. This paper uses a new generalized perturbation theory (GPT) method to estimate sensitivities of eigenvalues to fission matrix elements and then to calculate dominance ratio uncertainties.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Comparison of the effects of semicarbazide and {beta}-aminopropionitrile on the arterial extracellular matrix in the Brown Norway rat

To investigate a putative role for semicarbazide-sensitive amine oxidase (SSAO) in arterial extracellular matrix (ECM) organization, we compared arteries of growing Brown Norway (BN) rats after chronic administration of semicarbazide (SCZ) and {beta}-aminopropionitrile (BAPN), two inhibitors with different properties and relative specificities for SSAO and lysyl oxidase (LOX). The BN model is particularly well adapted to evaluating effects of toxic compounds on the arterial elastic network. We measured aortic LOX and SSAO activities and quantified several ECM parameters. After a pilot study comparing doses previously studied and testing for additivity, we studied low and high equimolar doses of SCZ and BAPN. Both compounds similarly inhibited LOX, whereas SCZ inhibited SSAO far more effectively than BAPN. Both decreased carotid wall rupture pressure, increased tail tendon collagen solubility, decreased aortic insoluble elastin (% dry weight) and dose-dependently increased defects in the internal elastic lamina of abdominal aorta, iliac and renal arteries. Our results suggest that either these effects are mediated by LOX inhibition, SCZ being slightly more effective than BAPN in our conditions, or SSAO acts similarly to and in synergy with LOX on ECM, the greater SCZ effect reflecting the simultaneous inhibition of both enzymes. However, the high SCZ dose increased aortic collagen and ECM proteins other than insoluble elastin markedly more than did equimolar BAPN, possibly revealing a specific effect of SSAO inhibition. To discriminate between the two above possibilities, and to demonstrate unequivocally a specific effect of SSAO inhibition on ECM formation or organization, we must await availability of more specific inhibitors.

60 APPLIED LIFE SCIENCES↗

Low-energy {sup 18}F(p, {alpha}){sup 15}O cross section measurements relevant to nova {gamma}-ray emission

During nova outbursts the decay of {sup 18}F is the main source of {gamma}-ray emission at and below 511 keV. In spite of much experimental effort, the quantity of {sup 18}F synthesized still suffers from large uncertainties which arise mainly from the {sup 18}F(p, {alpha}){sup 15}O reaction cross section at low energies. We report here on a new direct measurement carried out at the Louvain-la-Neuve RIB facility of Louvain-la-Neuve using an isobarically pure {sup 18}F beam impinging on a thin polyethylene target. Cross sections down to a center-of-mass energy of 400 keV have been obtained and the results together with previous experimental data were compared to R-matrix calculations. The effect of the relative contribution of the two low-lying 3/2{sup +} resonances as well as the sensitivity of the calculations to the R-matrix radius is studied in detail.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Photoconductivity of composite structures based on porous SnO{sub 2} sensitized with CdSe nanocrystals

The introduction of CdSe nanocrystals (colloidal quantum dots) into a porous SnO{sub 2} matrix brings about the appearance of photoconductivity in the structures. Sensitization is a consequence of charge exchange between the quantum dots and the matrix. Photoconductivity spectral measurements show that the nanocrystals embedded into the matrix are responsible for the optical activity of the structure. The photoconductivity of the structures sensitized with different-sized quantum dots is studied in the temperature range from 77 to 300 K. It is shown that the maximum photoconductivity is attained by introducing nanocrystals of the minimum size (2.7 nm). The mechanisms of charge-carrier transport in the matrix and the charge-exchange kinetics are discussed.

36 MATERIALS SCIENCE↗

Sensitivity of Next-Generation CMB Surveys to Neutrinos and Other Light Relics

Neutrinos and other light relics leave characteristic imprints in the cosmic microwave background anisotropies, making their observation a sensitive probe of the particle content and thermal history of the early universe. The energy density in these relativistic species is parameterized by their effective number $N_\mathrm{eff}$. Measuring this parameter at the percent level, which is a long-standing science goal of CMB-S4 and other experiments, would test a wide range of well-motivated physics within and beyond the Standard Model of particle physics. In this paper, we present Fisher-matrix forecasts of the projected sensitivity to $N_\mathrm{eff}$ of several CMB-S4 survey configurations considered during its extensive design phase. The conceptual design reaches $σ(N_\mathrm{eff}) < 0.03$ over its seven-year observing period, while the revised configuration achieves the same precision over a longer timescale. We complement these results with a cosmic-variance-limited survey over the same multipole range to quantify the room for improvement accessible with additional instrumental, observational, and theoretical efforts. Finally, we discuss the broad implications of precise $N_\mathrm{eff}$ measurements for the radiation sector, big bang nucleosynthesis, light thermal relics, and other early-universe physics. The forecasts presented in this work are performed with the publicly released DRAFT (Dark Radiation Anisotropy Flowdown Team) tool. It provides an end-to-end pipeline from simulated foreground maps and component separation to delensing and projected sensitivities for any cosmological parameter, and it can be directly applied to other cosmic microwave background survey designs.

Trendafilova, Cynthia [Case Western Reserve U., CE↗

Distribution-related luminescence of Eu{sup 3+} sensitized by SnO{sub 2} nano-crystals embedding in oxide glassy matrix

Eu{sup 3+} doped transparent glass ceramics embedding SnO{sub 2} nano-crystals were prepared by melt quenching and subsequent heating. Site selective excitation experiments revealed that some Eu{sup 3+} ions were incorporated in the SnO{sub 2} lattices by substituting Sn{sup 4+} ions, whereas the rest located in the oxide glassy matrix. Interestingly, it is found that the Eu{sup 3+} ions residing in the SnO{sub 2} lattices exhibited much longer luminescent decay lifetime than those in the glassy matrix. Measurements on the photoluminescence excitation and photoluminescence spectra demonstrated the occurrence of energy transfer from the SnO{sub 2} nano-crystals to the Eu{sup 3+} ions. The influences of Eu{sup 3+} content, and furthermore, their location on the energy transfer process were discussed. -- Graphical abstract: The Eu{sup 3+} distribution-related energy transfer behavior in transparent glass ceramics embedding SnO{sub 2} nano-crystals. Display Omitted Research Highlights: {yields}We prepared Eu{sup 3+} doped glass ceramics embedding SnO{sub 2} nano-crystals by melt quenching. {yields}The incorporation of Eu{sup 3+} in the SnO{sub 2} lattices by substituting Sn{sup 4+} was revealed. {yields}The efficient energy transfer from SnO{sub 2} to Eu{sup 3+} was verified. {yields}The Eu{sup 3+} distribution-related energy transfer behavior was proposed.

36 MATERIALS SCIENCE↗

First Observation of Electroweak Single Top Quark Production

We report the first observation of single top quark production using 3.2 fb{sup -1} of p{bar p} collision data with {radical}s = 1.96 TeV collected by the Collider Detector at Fermilab. The significance of the observed data is 5.0 standard deviations, and the expected sensitivity is in excess of 5.9 standard deviations. We measure a cross section of 2.3{sub -0.5}{sup +0.6}(stat + syst) pb, extract the CKM matrix element value |V{sub tb}| = 0.91{sub -0.11}{sup +0.11}(stat + syst) {+-} 0.07(theory), and set the limit |V{sub tb}| > 0.71 at the 95% C.L.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Solvent effect on polystyrene surface roughness on top of QCM sensor

Quartz Crystal Microbalance (QCM) has been used as a basis for many chemical sensors and biosensor. Its sensitivity to mass change which can detect a mass change on its surface down to sub ng/cm2 is one of its interesting aspects. Another interesting feature is its ability to work in liquid environment. However, there are many aspects which influence QCM sensor properties in contact with liquid. One of the aspects is surface roughness of the matrix layer where on top of it a biological sensitive layer will be immobilized. One of matrix layers in the immobilizing biological sensitive layer was polystyrene. Polystyrene was coated on the QCM sensor by using the spin coating method. During the coating process, polystyrene was solved using non-polar solvent. It is known that the physical and chemical properties of the solvent affect a transition process from soluble polymer becoming rigid polymer layer. In this work, we show that polystyrene solved in chloroform has a higher surface roughness compare to one solved in toluene, xylene, or tetrahydrofuran. Surface roughness of the polystyrene coating were measured using a non-contact profilometer. However, we also found that there is no difference on the electrical impedance of the QCM sensor coated with polystyrene resulted from differing solvent when the sensor was in contact with air and water. Thus, all of the mentioned solvent can be used to solve the polystyrene as a coating material for QCM sensor without affecting the electrical performance of the sensor, but the choice of the solution can be used as a simple method to control the difference roughness of the polystyrene coating.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗