Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sequential polymerization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

A Preliminary Investigation of the E-Beam Induced Polymerization of Maleimide and Norbornene End-capped Polyimides

A research area of high activity in connection with aerospace engineering has been the development of polymer thermosetting resins that can resist temperature as high as 300 C while maintaining adequate toughness, and providing ease of processing to enable low temperature and low cost composite fabrication methods. In order to meet such requirements, sequential interpenetrating polymer networks (IPNs) based on bismaleimide (BMI) and cyanate ester (CE) monomers were investigated. In these systems, a polycyanurate network is first formed in the presence of BMI and appropriate reactive diluent monomers and in a second step, a network based on the BMI is created in the presence of a fully formed polycyanurate network. The materials developed can be processed at relatively low temperature (less than 150 C) and with the aid of electron beam (EB) curing. Of major importance to the success of this work was the identification of a reactive diluent that improves ease of processing and has tailored reactivity to allow for the controlled synthesis of CE-BMI sequential IPNs. Based on solubility and reactivity of a number of reactive diluents, N-acryloylmorpholine (AMP) was selected as a comonomer for BMI copolymerization. A donor-acceptoreaction mechanism was suggested to explain the relative reactivity of a variety of reactive diluents towards maleimide functionality. The optimum processing parameters for the formation of the first network were determined through the study of metal catalyzed cure and hydrolysis of cyanate esters, whereas the reaction behavior for second network formation in terms of the influence of EB dose rate and temperature was elucidated through an in-situ kinetics study of maleimide and AMP copolymerization. Structure-property relationships were developed which allowed for the design of improved resin systems. In particular, appropriate network coupler possessing cyanate ester and maleimide functionality was synthesized to link the polycyanurate first network to the BMI/AMP second network and thus form linked sequential IPNs (LIPNs). Consequently, Tg as high as 370 C was achieved and a fracture toughness of 120 Joules per square meters was obtained for resin systems that possess adequately low viscosity for processing using liquid molding techniques at low temperature.

Palmese, Giuseppe R.↗

Ab initio molecular dynamics free energy study of enhanced copper (II) dimerization on mineral surfaces

Understanding the adsorption of isolated metal cations from water on to mineral surfaces is critical for toxic waste retention and cleanup in the environment. Heterogeneous nucleation of metal oxyhydroxides and other minerals on material surfaces is key to crystal growth and dissolution. The link connecting these two areas, namely cation dimerization and polymerization, is far less understood. In this work we apply ab initio molecular dynamics calculations to examine the coordination structure of hydroxide-bridged Cu(II) dimers, and the free energy changes associated with Cu(II) dimerization on silica surfaces. The dimer dissociation pathway involves sequential breaking of two Cu 2+ -OH – bonds, yielding three local minima in the free energy profiles associated with 0-2 OH – bridges between the metal cations, and requires the design of a (to our knowledge) novel reaction coordinate for the simulations. Cu(II) adsorbed on silica surfaces are found to exhibit stronger tendency towards dimerization than when residing in water. Cluster-plus-implicit-solvent methods yield incorrect trends if OH – hydration is not correctly depicted. The predicted free energy landscapes are consistent with fast equilibrium times (seconds) among adsorbed structures, and favor Cu 2+ dimer formation on silica surfaces over monomer adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantitative Prediction of Uranium Speciation and Amidoxime Binding in Seawater from Advanced Simulation Techniques

The goal of this project was to quantitatively predict stability of uranium species and thermochemistry of uranium binding with amidoxime ligands in realistic seawater conditions. The specific aims of the project were: (i) determine the stable species of uranium and its solvation structure in realistic seawater conditions; also speciation and solvation of uranium's major competing species in seawater, vanadium; (ii) accurately predict the free energies (and thereby stability constants) of binding between uranium and amidoxime; (iii) accurately predict the reaction enthalpies and entropies of binding between uranium and amidoxime as well as between vanadium and amidoxime. Main results and conclusions are as follows. First-principles molecular dynamic simulations found that the structure of the Ca 2 UO 2 (CO 3 ) 3 complex is very stable and that one Ca ion binds to the center UO 2 (CO 3 ) 3 4- anion stronger than the other Ca ion. This finding suggests that using time-resolved EXAFS spectra may confirm the asymmetry in binding of the two Ca ions in the aqueous Ca 2 UO 2 (CO 3 ) 3 complex. To consider the common ions, solvation of the Ca 2 UO 2 (CO 3 ) 3 complex in seawater was simulated by classical molecular dynamics simulation. It was found that the structure of the Ca 2 UO 2 (CO 3 ) 3 complex is very stable in the model seawater. A Na+ ion was found to be closely associated with the Ca 2 UO 2 (CO 3 ) 3 complex by indirectly interacting with one axial oxygen atom of the UO 2 group bridged by a water molecule. In addition, the Na + ion interacts closely with one Ca 2+ ion than the other. The present simulations revealed the key role of common ions such as Na + in impacting the solvation, structure, and apparent charge of the Ca 2 UO 2 (CO 3 ) 3 complex in seawater. The sequential processes of UO 2 2+ binding with the three CO 3 2- groups and the two Ca 2+ ions in pure water and in 0.1 M NaCl were simulated by classical molecular dynamics with both the non-constrained brute-force approach and umbrella sampling. The simulated free energies show excellent agreement with the experiment. The coordination structures of UO 2 (CO 3 ) 3 4- and CaUO 2 (CO 3 ) 3 2- were found to be significantly affected by the presence of Na + ions, leading to a monodentate binding of a carbonate group to U and a water molecule entering the first coordination shell of U. To shed light on the binding between uranyl and glutardiamidoxime (H 2 B), an important model and state-of-the-art ligand for seawater uranium extraction, a suite of computational methods was employed. From molecular dynamics (MD) simulations, it was found that the binding configurations of B 2- with uranyl favor the twofold distorted η 2 binding between the oximate ends (C=N-O-) and U, while HB - prefers the chelating mode for the oximate end with the neutral end being solvated by water. The free energies of sequential ligand binding to form UO 2 B, [UO 2 B 2 ] 2- , and [UO 2 (HB)B] - were simulated with umbrella sampling and very good agreement with the experimental values was achieved, which corroborates the structural insights into the binding mode. State-of-the-art polymeric sorbents employ both amidoximate and carboxylate groups on the side chains to achieve optimal U uptake and selectivity, so we simulated the binding of a model amidoximate–carboxylate bifunctional ligand with uranyl. Classical MD and free-energy simulations in 0.5 M NaCl showed that the carboxylate group binds first to uranyl, leading to a loose intermediate state, and then, the amidoximate group binds, resulting in a more stable and tight chelate state. Binding of the second bifunctional ligand follows a similar process, and the two ligands prefer a trans configuration around the uranyl group. The simulated free energies indicate that the two bifunctional ligands bind with uranyl 14 kcal/mol stronger than the two ligands with only amidoximate groups, confirming an important synergy between amidoximate and carboxylate groups in binding uranyl.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self-assembly of mesoscopically ordered chromatic polydiacetylene/silica nanocomposites

Nature abounds with intricate composite architectures composed of hard and soft materials synergistically intertwined to provide both useful functionality and mechanical integrity. Recent synthetic efforts to mimic such natural designs have focused on nanocomposites, prepared mainly by slow procedures like monomer or polymer infiltration of inorganic nanostructures or sequential deposition. Here we report the self-assembly of conjugated polymer/silica nanocomposite films with hexagonal, cubic or lamellar mesoscopic order using polymerizable amphiphilic diacetylene molecules as both structure-directing agents and monomers. The self-assembly procedure is rapid and incorporates the organic monomers uniformly within a highly ordered, inorganic environment. Polymerization results in polydiacetylene/silica nanocomposites that are optically transparent and mechanically robust. Compared to ordered diacetylene-containing films prepared as Langmuir monolayers or by Langmuir-Blodgett deposition, the nanostructured inorganic host alters the diacetylene polymerization behaviour, and the resulting nanocomposite exhibits unusual chromatic changes in response to thermal, mechanical and chemical stimuli. The inorganic framework serves to protect, stabilize, and orient the polymer, and to mediate its function. The nanocomposite architecture also provides sufficient mechanical integrity to enable integration into devices and microsystems.

NASA Discipline Life Support Systems↗

Sequential self-assembly of DNA functionalized droplets

Complex structures and devices, both natural and manmade, are often constructed sequentially. From crystallization to embryogenesis, a nucleus or seed is formed and built upon. Sequential assembly allows for initiation, signaling, and logical programming, which are necessary for making enclosed, hierarchical structures. Though biology relies on such schemes, they have not been available in materials science. We demonstrate programmed sequential self-assembly of DNA functionalized emulsions. The droplets are initially inert because the grafted DNA strands are pre-hybridized in pairs. Active strands on initiator droplets then displace one of the paired strands and thus release its complement, which in turn activates the next droplet in the sequence, akin to living polymerization. This strategy provides time and logic control during the self-assembly process, and offers a new perspective on the synthesis of materials.

36 MATERIALS SCIENCE↗

Continuous Flow Fabrication of Block Copolymer-Grafted Silica Micro-Particles in Environmentally Friendly Water/Ethanol Media

Polymer-grafted inorganic particles (PGIPs) are attractive building blocks for numerous chemical and material applications. Surface-initiated controlled radical polymerization (SI-CRP) is the most feasible method to fabricate PGIPs. However, a conventional in-batch reaction still suffers from several disadvantages, including time-consuming purification processes, low grafting efficiency, and possible gelation problems. Herein, a facile method is demonstrated to synthesize block copolymer–grafted inorganic particles, that is, poly(poly(ethylene glycol) methyl ether methacrylate) (PPEGMEMA)-b-poly(N-isopropylacrylamide) (PNIPAM)–grafted silica micro-particles using continuous flow chemistry in an environmentally friendly aqueous media. Immobilizing the chain transfer agent and subsequent SI-CRP can be accomplished sequentially in a continuous flow system, avoiding multi-step purification processes in between. The chain length (MW) of the grafted polymers is tunable by adjusting the flow time or monomer concentration, and the narrower molar mass dispersity (&ETH; < 1.4) of the grafted polymers reveals the uniform polymer chains on the particles. Moreover, compared with the in-batch reaction at the same condition, the continuous system also suppresses possible gelation problems.

36 MATERIALS SCIENCE↗

Poly(cyclohexylethylene)- block -Poly(lactide) Oligomers for Ultrasmall Nanopatterning Using Atomic Layer Deposition

Poly(cyclohexylethylene)-block-poly(lactide) (PCHE–PLA) block polymers were synthesized through a combination of anionic polymerization, heterogeneous catalytic hydrogenation and controlled ring-opening polymerization. Ordered thin films of PCHE–PLA with ultrasmall hexagonally packed cylinders oriented perpendicularly to the substrate surface were prepared by spin-coating and subsequent solvent vapor annealing for use in two distinct templating strategies. In one approach, selective hydrolytic degradation of the PLA domains generated nanoporous PCHE templates with an average pore diameter of 5 ± 1 nm corroborated by atomic force microscopy and grazing incidence small-angle X-ray scattering. Alternatively, sequential infiltration synthesis (SIS) was employed to deposit Al 2 O 3 selectively into the PLA domains of PCHE–PLA thin films. A combination of argon ion milling and O2 reactive ion etching (RIE) enabled the replication of the Al 2 O 3 nanoarray from the PCHE–PLA template on diverse substrates including silicon and gold with feature diameters less than 10 nm.

36 MATERIALS SCIENCE↗

Anionic polymerization of oxadiazole-containing 2-vinylpyridine by precisely tuning nucleophilicity and the polyelectrolyte characteristics of the resulting polymers

Anionic polymerization is one of the most powerful techniques for preparation of well-defined polymers. However, this well-known and widely employed polymerization technique encounters major limitations for the polymerization of functional monomers containing heteroatoms. This work presents the anionic polymerization of 2-phenyl-5-(6-vinylpyridin-3-yl)-1,3,4-oxadiazole (VPyOzP), a heteroatom monomer that contains both oxadiazole and pyridine substituents within the same pendant group, using various initiating systems based on diphenylmethyl potassium (DPM-K) and triphenylmethyl potassium (TPM-K). Remarkably, well-defined poly(2-phenyl-5-(6-vinylpyridin-3-yl)-1,3,4-oxadiazole) (PVPyOzP) polymers having predicted molecular weights (MW) ranging from 2200 to 21 100 g/mol and polydispersity indices (PDI) ranging from 1.11 to 1.15 were prepared with TPM-K, without any additional additives, at –78 °C. The effect of temperature on the polymerization of PVPyOzP was also studied at –78, –45, 0, and 25 °C, and it was observed that increasing the polymerization temperature produced materials with unpredictable MW’s and broader molecular weight distributions. Furthermore, the nucleophilicity of PVPyOzP was investigated through copolymerization with methyl methacrylate and acrylonitrile, where only living poly(methyl methacrylate) (PMMA) prepared by DPM-K/VPPy and in the absence of additives such as lithium chloride (LiCl) and diethyl zinc (ZnEt 2 ) could be used to produce the well-defined block copolymer of PMMA-b-PVPyOzP. It was also demonstrated by sequential monomer addition that the nucleophilicity of living PVPyOzP is located between that of living PMMA and polyacrylonitrile (PAN). Here, the pyridine moiety of the pendant group also allowed for quaternization and produced PQVPyOzP homopolymer using methyl iodide (CH 3 I) and bis(trifluoromethylsulfonyl)amide [Tf 2 N – ]. The resulting charged polymer and counterion complexes were manipulated and investigated for potential use as membranes for carbon dioxide (CO 2 ) capture.

36 MATERIALS SCIENCE↗

Oligomer functionalized nanotubes and composites formed therewith

Disclosed herein is a sequential functionalization methodology for the covalent modification of nanotubes with between one and four repeat units of a polymer. Covalent attachment of oligomer units to the surface of nanotubes results in oligomer units forming an organic sheath around the nanotubes, polymer-functionalized-nanotubes (P-NTs). P-NTs possess chemical functionality identical to that of the functionalizing polymer, and thus provide nanoscale scaffolds which may be readily dispersed within a monomer solution and participate in the polymerization reaction to form a polymer-nanotube/polymer composite. Formation of polymer in the presence of P-NTs leads to a uniform dispersion of nanotubes within the polymer matrix, in contrast to aggregated masses of nanotubes in the case of pristine-NTs. The covalent attachment of oligomeric units to the surface of nanotubes represents the formation of a functional nanoscale building block which can be readily dispersed and integrated within the polymer to form a novel composite material.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Rehydration Data for the Materials International Space Station Experiment (MISSE) Polymer Films

Atomic oxygen erosion of polymers in low Earth orbit (LEO) poses a serious threat to spacecraft performance and durability. Forty thin film polymer and pyrolytic graphite samples, collectively called the PEACE (Polymer Erosion and Contamination Experiment) Polymers, were exposed to the LEO space environment on the exterior of the ISS for nearly four years as part of the Materials International Space Station Experiment 1 & 2 (MISSE 1 & 2) mission. The purpose of the MISSE 2 PEACE Polymers experiment was to determine the atomic oxygen (AO) erosion yield (E(sub y), volume loss per incident oxygen atom) of a wide variety of polymers exposed to the LEO space environment. The Ey values were determined based on mass loss measurements. Because many polymeric materials are hygroscopic, the pre-flight and post-flight mass measurements were obtained using dehydrated samples. To maximize the accuracy of the mass measurements, obtaining dehydration data for each of the polymers was desired to ensure that the samples were fully dehydrated before weighing. A comparison of dehydration and rehydration data showed that rehydration data mirrors dehydration data, and is easier and more reliable to obtain. Tests were also conducted to see if multiple samples could be dehydrated and weighed sequentially. Rehydration curves of 43 polymers and pyrolytic graphite were obtained. This information was used to determine the best pre-flight, and post-flight, mass measurement procedures for the MISSE 2 PEACE Polymers experiment, and for subsequent NASA Glenn Research Center MISSE polymer flight experiments.

de Groh, Kim K.↗

Kinematic fixtures to enable multi-material printing and rapid non-destructive inspection during two-photon lithography

Here, two-photon lithography (TPL) is a polymerization based technique that enables additive manufacturing of millimeter scale parts with submicron features. TPL equipment is often based on retrofitted optical microscopes that lack precise registration capabilities. Consequently, slow and error-prone visual alignment to fiducials is necessary if registration to pre-existing features is required. Herein, we have designed, built, and tested precise kinematic fixtures that are repeatable to within ±315 nm (3σ value) and passively register the build surface to TPL equipment with an accuracy of ±1.7 μm. This enables one to sequentially print with multiple materials by building the structures directly on top of the kinematic fixtures. In addition, the same fixtures passively register to an X-ray computed tomography (CT) system to enable non-destructive 3D inspection that is integrated with the fabrication process. These fixtures (i) provide a practical means to handle micro-scale parts during non-destructive imaging, (ii) reduce the set-up time for X-ray CT from more than an hour to less than a few minutes, and (iii) eliminate operator uncertainty from the multi-material printing and imaging process. As such, these fixtures enable new printing and imaging functionalities that are critical for high-quality additive manufacturing of multi-material polymer parts with microscale and submicron features.

42 ENGINEERING↗

Staged Self-Assembly of Colloidal Metastructures

We demonstrate sequential assembly of chemically patchy colloids such that their valence differs from stage to stage to produce hierarchical structures. For proof of concept, we employ ACB triblock spheres suspended in water, with the C middle band electrostatically repulsive. In the first assembly stage, only A–A hydrophobic attraction contributes, and discrete clusters form. They can be stored, but subsequently activated to allow B–B attractions, leading to higher-order assembly of clusters with one another. The growth dynamics, observed at a single particle level by fluorescence optical microscopy, obey the kinetics of stepwise polymerization, forming chains, pores, and networks. Between linked clusters, we identify three possible bond geometries, linear, triangular, and square, by an argument that is generalizable to other patchy colloid systems. Furthermore, this staged assembly strategy offers a promising route to fabricate colloidal assemblies bearing multiple levels of structural and functional complexity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Few-cycle atomic layer deposition to nanoengineer polybenzimidazole for H 2 /CO 2 separation

Atomic layer deposition (ALD) creates uniform sub-nanometer films on a variety of surfaces and nanopore walls and has been used to modify polymers to improve surface affinity towards specific molecules, solvent resistance, and barrier properties to gases and vapors. Here, for the first time, we demonstrate that few-cycle ALD can be used to engineer functional polymers at a sub-nanometer scale to improve both molecular size-sieving ability and counterintuitively, gas permeability. Particularly, 1-cycle ALD treatment of polybenzimidazole (PBI) by sequential exposure to trimethylaluminum (TMA) and water vapor remarkably increases H 2 permeability by 120% - 270% and H 2 /CO 2 selectivity by 30% at 35–200 °C. The ALD not only deposits an AlOx layer on the surface but also enables the TMA to infiltrate and react with the bulk PBI to form an AlO x network, disrupting polymer chain packing and increasing chain rigidity. The membrane exhibits excellent stability when challenged with simulated syngas, overcoming the permeability/selectivity tradeoff for H 2 /CO 2 separation. In conclusion, this study showcases a facile and scalable way of engineering polymeric membranes at a sub-nanometer level to improve molecular separation performance.

36 MATERIALS SCIENCE↗

Orientation control of high-χ triblock copolymer for sub-10 nm patterning using fluorine-containing polymeric additives

Directed self-assembly (DSA) of block copolymers (BCPs) Is one of the most promising techniques to tackle the ever-increasing demand for subllthographic features In semiconductor industries. BCPs with high Flory-Huggins parameter (chi) are of particular Interest due to their ability to self-assemble at the length scale of sub-10 nm. However, such high-chi BCPs typically have imbalanced surface energies between respective blocks, making it a challenge to achieve desired perpendicular orientation. To address this challenge, we mixed a fluorine-containing polymeric additive with poly(2-vlnylpyrldine)-block-polystyrene-block-poly(2-vlnylpyrldine) (P2VP-b-PS-b-P2VP) and successfully controlled the orientation of the high-chi triblock copolymer. The additive selectively mixes with P2VP block through hydrogen bonding and can reduce the dissimilarity of surface energies between PS and P2VP blocks. After optimizing additive dose and annealing conditions, desired perpendicular orientation formed upon simple thermal annealing. We further demonstrated DSA of this material system with five times density multiplication and a half-pitch as small as 8.5 nm. This material system Is also amenable to sequential Infiltration synthesis treatment to selectively grow metal oxide In P2VP domains, which can facilitate the subsequent pattern transfer. We believe that this integration-friendly DSA platform using simple thermal annealing holds the great potential for sub-10 nm nanopatterning applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Radiation effects on polymeric materials

It is important to study changes in properties of polymeres after irradiation with charged particles, with ultraviolet radiation, and with combinations of both. An apparatus for this purpose has been built at the NASA Langley Research Center. It consists of a chamber 9 inches in diameter and 9 inches high with a port for an electron gun, another port for a mass spectrometer, and a quartz window through which an ultraviolet lamp can be focused. The chamber, including the electron gun and the mass spectrometer, can be evacuated to a pressure of 10 to the 8th power torr. A sample placed in the chamber can be irradiated with electrons and ultraviolet radiation separately, sequentially, or simultaneously, while volatile products can be monitored during all irradiations with the mass spectrometer. The apparatus described above has been used to study three different polymer films: lexan; a polycarbonate; P1700, a polysulfone; and mylar, a polyethylene terephthalate. All three polymers had been studied extensively with both electrons and ultraviolet radiation separately, but not simultaneously. Also, volatile products had not been monitored during irradiation for the materials. A high electron dose rate of 530 Mrads/hr was used so that a sufficient concentration of volatile products would be formed to yield a reasonable mass spectrum.

Kiefer, Richard L.↗

Optical Analysis of Transparent Polymeric Material Exposed to Simulated Space Environment

Transparent polymeric materials are being designed and utilized as solar concentrating lenses for spacecraft power and propulsion systems. These polymeric lenses concentrate solar energy onto energy conversion devices such as solar cells and thermal energy systems. The conversion efficiency is directly related to the transmissivity of the polymeric lens. The Environmental Effects Group of the Marshall Space Flight Center's Materials, Processes, and Manufacturing Department exposed a variety of materials to a simulated space environment and evaluated them for an, change in optical transmission. These materials include Lexan(TM), polyethylene terephthalate (PET). several formulations of Tefzel(TM). and Teflon(TM), and silicone DC 93-500. Samples were exposed to a minimum of 1000 Equivalent Sun Hours (ESH) of near-UV radiation (250 - 400 nm wavelength). Data will be presented on materials exposed to charged particle radiation equivalent to a five-year dose in geosynchronous orbit. These exposures were performed in MSFC's Combined Environmental Effects Test Chamber, a unique facility with the capability to expose materials simultaneously or sequentially to protons, low-energy electrons, high-energy electrons, near UV radiation and vacuum UV radiation.Prolonged exposure to the space environment will decrease the polymer film's transmission and thus reduce the conversion efficiency. A method was developed to normalize the transmission loss and thus rank the materials according to their tolerance to space environmental exposure. Spectral results and the material ranking according to transmission loss are presented.

Edwards, David L.↗

Thermal Desorption/GCMS Analysis of Astrobiologically Relevant Organic Materials

Several macromolecular organic materials, both biologically-derived (type II kerogen and humic acid) and abiotic in origin (Murchison insoluble organic material, cyanide polymer, and Titan tholin) were subjected to thermal desorption using a Chromatoprobe attachment on a Varian Saturn 2000 GCMS system. Each sample was heated sequentially at 100, 200, and 300 C to release volatile components. The evolved compounds were then separated on a Supelco EC-1 dimethylsilica GC column and detected by the Saturn 2000 ion trap mass spectrometer. The various types of macromolecular organic material subjected to thermal desorption produced distinctly different GCMS chromatograms at each temperature, containing fractions of both low and high chromatographic mobility. The relative amounts of detectable volatiles released at each temperature also differed, with type II kerogen and cyanide polymer containing the highest percentage of low-temperature components. In all the samples, the highest yield of released compounds occurred at 300 C. Only cyanide polymer evolved a homologous hydrocarbon series, suggesting that it is the only material among those examined that contains a truly polymeric structure. Pyrolysis/gas chromatography/mass spectrometry has been used extensively for analysis of terrestrial organic macromolecular materials, and was also part of the instrument package on the Viking landers. Thorough analysis by pyrolysis usually employs temperatures of 500 C or higher, which for in situ analyses can be problematic given spacecraft power and materials constraints. This study demonstrates that heating of organic materials of astrobiological relevance to temperatures as low as 200-300 C for short periods releases volatile components that can be analyzed by gas chromatography and mass spectrometry. Even in the absence of full pyrolysis, useful chemical information on samples can be obtained, and materials from different biological and abiological sources can be distinguished. The research described in this paper was carried out at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration.

McDonald, Gene D.↗

Space environmental effects on polymeric materials

Polymeric materials that may be exposed on spacecraft to the hostile environment beyond Earth's atmosphere were subjected to atomic oxygen, electron bombardment, and ultraviolet radiation in terrestrial experiments. Evidence is presented for the utility of an inexpensive asher for determining the relative susceptibility of organic polymers to atomic oxygen. Kapton, Ultem, P1700 polysulfone, and m-CBB/BIS-A (a specially formulated polymer prepared at NASA Langley) all eroded at high rates, just as was observed in shuttle experiments. Films of Ultem, P1700 polysulfone, and m-CBB/BIS-A were irradiated with 85 keV electrons. The UV/VIS absorbance of Ultem was found to decay with time after irradiation, indicating free radical decay. The tensile properties of Ultem began to change only after it had been exposed to 100 Mrads. The effects of dose rate, temperature, and simultaneous vs. sequential electron and UV irradiation were also studied.

Kiefer, Richard L.↗