SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Simultaneous observations of solar wind He(2+) and O(6+) shell-like distributions in the magnetosheath were obtained by the AMPTE CCE on November 1, 1984. It is found that the present distributions are centered on the downstream H(+) bulk velocity and have radii proportional to the mass/charge ratio. The results support an electrostatic cross-shock potential model.
Understanding charge transfer dynamics through the ligand shell of colloidal nanoparticles has been an important pursuit in solar energy conversion. While charge transport through ligand shells of nanoparticle films has been studied intensely in static dry and electrochemical systems, its influence on charge transfer kinetics in dispersed colloidal systems has received relatively less attention. This work reports the oxidation of amine passivated tungsten oxide nanoparticles by an organically soluble tris-(1,10-phenanthroline) iron(III) derivative. By following the rate of this oxidation optically via the production of the ferroin derivative under various reaction conditions and particle derivatizations, we are able to show that the fluxional ligand shells on dispersed, colloidal nanoparticles provide a separate and more facile pathway for charge transfer, in which the rate-limiting step for charge transfer is the ligand dissociation. Since such ligand shells are frequently required for nanoparticle stability, this observation has significant implications for colloidal nanoparticle photocatalysis.
We compare emission line intensities from photoionization models of smooth and fractal shell geometries for low density H II regions, with particular focus on the low-ionization diagnostic diagram [N II]/H{alpha} versus H{alpha}. Building on previously published models and observations of Barnard's Loop, we show that the observed range of intensities and variations in the line intensity ratios may be reproduced with a three-dimensional shell geometry. Our models adopt solar abundances throughout the model nebula, in contrast with previous one-dimensional modeling which suggested the variations in line intensity ratios could only be reproduced if the heavy element abundances were increased by a factor of {approx}1.4. For spatially resolved H II regions, the multiple sightlines that pierce and sample different ionization and temperature conditions within smooth and fractal shells produce a range of line intensities that are easily overlooked if only the total integrated intensities from the entire nebula model are computed. Our conclusion is that inference of H II region properties, such as elemental abundances, via photoionization models of one-dimensional geometries must be treated with caution and further tested through three-dimensional modeling.
We determine the speeds, and many other physical properties, of flame fronts that propagate inward into degenerate and semidegenerate cores of carbon and oxygen (CO) and neon and oxygen (NeOMg) white dwarfs when such flames are bounded on their exterior by a convective region. Combustion in such fronts, per se, is incomplete, with only a small part of the initial mass function burned. A condition of balanced power is set up in the star where the rate of energy emitted as neutrinos from the convective region equals the power available from the unburned fuel that crosses the burning front. The propagation of the burning front itself is in turn limited by the temperature at the base of the convective shell, while cannot greatly exceed the adiabatic value. Solving for consistency between these two conditions gives a unique speed for the flame. Typical values for CO white dwarfs are a few hundredths of a centimeter per second. Flames in NeOMg mixtures are slower. Tables are presented in a form that can easily be implemented in stellar evolution codes and yield the rate at which the convective shell advances into the interior. Combining these velocities with the local equations for stellar structure, we find a minimum density for each gravitational potential below with the local equations for stellar structure, we find a minimum density for each gravitational potential below which the flame cannot propagate, and must die. Although detailed stellar models will have to be constructed to reslove some issues conclusively, our results that a CO white dwarf inginted at its edge will not burn carbon all the way to its center unless the mass of the white dwarf exceeds 0.8 solar mass. On the other hand, it is difficult to ignite carbon burning by compression alone anywhere in a white dwarf whose mass does not exceed 1.0 solar mass. Thus, compressionally ignited shell carbon burning in an accerting CO dwarf almost certainly propagates all the way to the center of the star. Implications for neutron star formation, and Type Ia supernova models, are briefly discussed. These are also applicable to massive stars in the about 10-12 solar mass range which ignite neon burning off center.
Nowhere in the solar system are impact morphologies observed in greater variety than on the icy Galilean satellites. This is very likely a consequence of the structural and thermal state of the crust at the time of impact, and perhaps impact velocity. We have conducted a multi-disciplinary investigation to study how these features formed. The particular combination of geophysical factors and impactor characteristics that is shared by these satellites is likely responsible for these features. We have derived Digital Terrain Models for a number of these features, which have been used as a tool for producing facies maps. Impact features on Ganymede and Callisto are relatable to impact features on Europa, with implications for its ice shell history. We have identified two broad classes of these impact features: (a) Crater forms, which variously include pits, central domes, and crater rims; and (b) Palimpsests (including pene-palimpsests), which all have smooth enclosed central plains, an extensive outer undulating plains unit, concentric arcuate ridges(in the case of pene-palimpsests), and no recognizable rim. The very large, measured volume of the undulating plains unit of the pene-palimpsest Buto, Ganymede, substantially exceeds the amount of target material that could have been both melted and excavated by the impact event itself. Therefore, we conclude that the undulating plains material was derived from a fluid or “slushy” layer in the near-surface target at the time of impact. The recognition of undulating plains as the dominant unit in Memphis and Nidaba, two other palimpsests on Ganymede that we have mapped(which display highly variable crater counts, with Buto being the least cratered),leads us to a working hypothesis that these plains only form where and when the target has substantial near surface fluid or “slush.” By extension, all other impact features on Ganymede and Callisto, such as those with central pits and central domes, formed in targets with no pre-existing, or at most inconsequential, amounts of fluid or “slush.” Supporting this conclusion, modeling by members of our group indicates that the present topography of impact features with central pits and domes can be largely explained by the behavior of ice alone, with no or little contribution from fluids. Our study supports explanations for the formation and final appearance of palimpsests (and pene-palimpsests) that are entirely applicable to this feature class, and sharply distinct from explanations for other impact features (crater forms) on Ganymede and Callisto.
The solar heating and hot water system installed at the William Tao & Associates, Inc., office building in St. Louis, Missouri is described, including maintenance and construction problems, final drawings, system requirements, and manufacturer's component data. The solar system was designed to provide 50 percent of the hot water requirements and 45 percent of the space heating needs for a 900 sq ft office space and drafting room. The solar facility has 252 sq ft of glass tube concentrator collectors and a 1000 gallon steel storage tank buried below a concrete slab floor. Freeze protection is provided by a propylene glycol/water mixture in the collector loop. The collectors are roof mounted on a variable tilt array which is adjusted seasonally and is connected to the solar thermal storage tank by a tube-in-shell heat exchanger. Incoming city water is preheated through the solar energy thermal storage tank.
We report the demonstration of dilute nitride heterostructure core/shell microwire solar cells utilizing the combination of top-down reactive-ion etching to create the cores (GaP) and molecular beam epitaxy to create the shells (GaNP). Systematic studies of cell performance over a series of microwire lengths, array periods, and microwire sidewall morphologies examined by transmission electron microscopy were conducted to shed light on performance-limiting factors and to optimize the cell efficiency. We show by microscopy and correlated external quantum efficiency characterization that the open circuit voltage is degraded primarily due to the presence of defects at the GaP/GaNP interface and in the GaNP shells, and is not limited by surface recombination. Compared to thin film solar cells in the same growth run, the microwire solar cells exhibit greater short circuit current but poorer open circuit voltage due to greater light absorption and number of defects in the microwire structure, respectively. The comprehensive understanding presented in this work suggests that performance benefits of dilute nitride microwire solar cells can be achieved by further tuning of the epitaxial quality of the underlying materials.
The process of X-ray emission following charge exchange between solar wind heavy ions and cometary gases is studied in the laboratory. The emission is recorded with the spare ASTRO-E 6x6 microcalorimeter array. The microcalorimeter affords a resolution of better than 10 eV in the range of X-ray energies of interest arid thus individual emission lines can be resolved. Our present measurements focus on the most abundant K-shell heavy ions found in the solar wind. In particular, we measure the K-shell emission of bare C, N, O, and Ne, and their hydrogenlike counter parts interacting with such gases as CO2, N2, and CH4. Several results are noted that had not been considered in the early cometary X-ray models.
The Infrared Astronomical Satellite (IRAS) science team has discovered a shell of particulate material around the star Vega. At the mean distance and temperature of the shell, the expected condensation products from a protostellar nebula would be dominated by frozen volatiles, in particular water ice. It is not possible to discriminate between dirty ice and silicate materials in the Vega shell on the basis of the IRAS data. The Vega shell is probably a ring of cometary bodies with an estimated minimum mass of 15 earth masses, analogous to one that has been hypothesized for the solar system. A possible hot inner shell around Vega may be an asteroid-like belt of material a few astronomical units from the star.
Good evidence is assembled showing that the Suit's core arid surface vary on time scales from a month to a decade arid that a number of scales are similar. The most plausible source for numerous long time scales and periodicities is long-lived global oscillations. This suggests g-modes (oscillations restored mainly by buoyancy) because they particularly affect the core and base of the convective envelope, which then indirectly modulates the surface. Also, standing g-modes have rotational properties that match many observed periodicities. But the standard solar model (SSM) has a static core and excites few if any g-modes. making new interior structures worth exploring. The model outlined here assumes two well mixed shells near 0.18 and 0.68 R, (13 = solar radius) where sound speed data shows sharp deviations from the SSM. Mixing is sustained by flows driven by the oscillations. The shells form a cavity that excludes g-modes from their main damping region below 0.1 R, assisting their net excitation and increasing their oscillation periods by at least a factor of two and probably much more. In terms of the solar luminosity L, the modes transport up through the cavity a power approx. 0.004 L as a lower limit and 0.11 L as all upper limit. The modes dissipate energy in the outer shell and cool the inner shell, asymmetrically in each case, and this stimulates occasional convective events whose response time is typically 0.8 years longer near the inner shell. Such events cool the core and reduce neutrino flux while heating the envelope and increasing solar activity. This gives a physical basis for a well mixed Sun with low neutrino flux and basis for the observed anticorrelation and lag of neutrino behind surface activity.
Every supernova so far observed has been considered to be the terminal explosion of a star. Moreover, all supernovae with absorption lines in their spectra show those lines decreasing in velocity over time, as the ejecta expand and thin, revealing slower-moving material that was previously hidden. In addition, every supernova that exhibits the absorption lines of hydrogen has one main light-curve peak, or a plateau in luminosity, lasting approximately 100 days before declining. Here we report observations of iPTF14hls, an event that has spectra identical to a hydrogen-rich core-collapse supernova, but characteristics that differ extensively from those of known supernovae. The light curve has at least five peaks and remains bright for more than 600 days; the absorption lines show little to no decrease in velocity; and the radius of the line-forming region is more than an order of magnitude bigger than the radius of the photosphere derived from the continuum emission. These characteristics are consistent with a shell of several tens of solar masses ejected by the progenitor star at supernova-level energies a few hundred days before a terminal explosion. Another possible eruption was recorded at the same position in 1954. Multiple energetic pre-supernova eruptions are expected to occur in stars of 95 to 130 solar masses, which experience the pulsational pair instability. That model, however, does not account for the continued presence of hydrogen, or the energetics observed here. Another mechanism for the violent ejection of mass in massive stars may be required.
Tandem junction (n–p + -Si/ITO/WO 3 /liquid) core–shell microwire devices for solar-driven water splitting have been designed, fabricated and investigated photoelectrochemically. The tandem devices exhibited open-circuit potentials of E oc = –1.21 V versus E 0 '(O 2 /H 2 O), demonstrating additive voltages across the individual junctions (n–p + -Si E oc = –0.5 V versus solution; WO 3 /liquid E oc = –0.73 V versus E 0 '(O 2 /H 2 O)). Optical concentration (12×, AM1.5D) shifted the open-circuit potential to E oc = –1.27 V versus E 0 '(O 2 /H 2 O) and resulted in unassisted H 2 production during two-electrode measurements (anode: tandem device, cathode: Pt disc). Here, the solar energy-conversion efficiencies were very low, 0.0068% and 0.0019% when the cathode compartment was saturated with Ar or H 2 , respectively, due to the non-optimal photovoltage and band-gap of the WO 3 that was used in the demonstration system to obtain stability of all of the system components under common operating conditions while also insuring product separation for safety purposes.
We discuss the impact of residual nuclear burning in the cooling sequences of hydrogen-rich (DA) white dwarfs with very low metallicity progenitors (Z = 0.0001). These cooling sequences are appropriate for the study of very old stellar populations. The results presented here are the product of self-consistent, fully evolutionary calculations. Specifically, we follow the evolution of white dwarf progenitors from the zero-age main sequence through all the evolutionary phases, namely the core hydrogen-burning phase, the helium-burning phase, and the thermally pulsing asymptotic giant branch phase to the white dwarf stage. This is done for the most relevant range of main-sequence masses, covering the most usual interval of white dwarf masses—from 0.53 M {sub ☉} to 0.83 M {sub ☉}. Due to the low metallicity of the progenitor stars, white dwarfs are born with thicker hydrogen envelopes, leading to more intense hydrogen burning shells as compared with their solar metallicity counterparts. We study the phase in which nuclear reactions are still important and find that nuclear energy sources play a key role during long periods of time, considerably increasing the cooling times from those predicted by standard white dwarf models. In particular, we find that for this metallicity and for white dwarf masses smaller than about 0.6 M {sub ☉}, nuclear reactions are the main contributor to the stellar luminosity for luminosities as low as log (L/L {sub ☉}) ≅ –3.2. This, in turn, should have a noticeable impact in the white dwarf luminosity function of low-metallicity stellar populations.
Physical properties and construction of simulated solar carbon electrode - study of shell, core, and glue
Magneto-convection and gravity waves are numerically simulated with a nonlinear, three-dimensional, time-dependent model of a stratified, rotating, spherical fluid shell heated from below. A Solar-like reference state is specified while global velocity, magnetic field, and thermodynamic perturbations are computed from the anelastic magnetohydrodynamic equations. Convective overshooting from the upper (superadiabatic) part of the shell excites gravity waves in the lower (subadiabatic) part. Due to differential rotation and Coriolis forces, convective cell patterns propagate eastward with a latitudinally dependent phase velocity. The structure of the excited wave motions in the stable region is more time-dependent than of the convective motions above. The magnetic field tends to be concentrated over giant-cell downdrafts in the convective zone but is affected very little by the wave motion in the stable region.
New H-alpha narrow-based CCD imaging of the recurrent nova T Pyxidis and the detection of a very faint, extended H-alpha halo surrounding the already known shell are reported. A forbidden O III image containing an emitting shell with a morphology different from that of the H-alpha shell is presented, and measurements of the H-alpha shell expansion are reported which rule out the 1966 eruption date for the shell origin, assuming uniform expansion. It is proposed that the observed shell consists of slowly moving, solar abundance ejecta which are photoionized.
Solar-thermal propulsion is a concept for producing thrust sufficient for orbital transfers and requires innovative, lightweight structures. This note presents a description of an inflatable concentrator that consists of a torus, lens simulator, and three tapered struts. Modal testing was discussed for characterization and verification of the solar concentrator assembly. Finite element shell models of the concentrator were developed using a two-step nonlinear approach, and results were compared to test data. Reasonable model-to-test agreement was achieved for the torus, and results for the concentrator assembly were comparable to the test for several modes.
This paper presents early results from aircraft measurements made by a Low-LET Radiation Spectrometer (LoLRS), as part of a long-range effort to study the complex dynamics of the atmospheric radiation field. For this purpose, a comprehensive data base is being generated to enable a multivariable global mapping (and eventually modeling) of doses and Linear-Energy-Transfer (LET) spectra at aviation altitudes. To accomplish this, a methodical collection of data from the LoLRS (and other instruments), is planned over extended periods of time, in a manner that complements some previous isolated and sporadic measurements by other workers, with the objective to generate a detailed long-range description of the cosmic-ray induced particle environment and to study its variability and dependence on atmospheric thickness, magnetic latitude, L-shell or rigidity, space weather, solar particle events, solar cycle effects, magnetic field variation, diurnal and seasonal effects, and atmospheric weather. Analysis of initial data indicates that the dose is rising with increasing altitude and increasing magnetic latitude. Comparison of total doses with predictions is in good agreement.