Search NASA⌕ Search

SEARCH · Search NASA

Results for “Size distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Retrieval of aerosol size distribution moments from multiwavelength particulate extinction data

An iterative method for deriving the particle size distribution from multiwavelength satellite remote sensing data is presented and its use illustrated with an application to SAGE II data. The compression size distribution method (CSD) features interpolation and look-up features for relating the coefficients of a least-squares fit as a function of wavelength to parameters of the compression function that have been obtained by Mie calculations. Results are reported of comparisons between particulate radii predicted for the El Chichon volcano aerosol based on SAGE II data and 14 radii measured with NASA flights through the aerosol with aircraft carrying wire impactors.

Livingston, J. M.↗

The Effect of Solid Constituent Particle Size Distributions on TP-H1148 Propellant Slag

Special aluminum and ammonium perchlorate (AP) particle size distributions were prepared for a matrix of five-inch diameter, center-perforated (CP) motor tests to measure the aluminum oxide slag response in Space Shuttle Reusable Solid Rocket Motor (RSRM) propellant. Previous tests of TP-H1148 propellant in five-inch CP spin motors have shown a correlation between aluminum particle size and generated slag. The motors for this study were cast from thirteen five-gallon propellant mixes which used five particle size levels of aluminum powder, five of unground AP and three of ground AP. Aluminum had the greatest effect on slag formation, the more coarse fractions causing greater slag quantities and larger slag particles. Unground AP had about half the effect of aluminum with the coarser fractions again producing more and larger sized slag particles. The variation in ground AP did not have a significant effect on slag formation. Quench bomb tests showed the same trends as the spin motors, that is, larger aluminum and AP particle size distributions generated larger slag particles leaving the propellant surface. Cured propellant mechanical properties were also impacted by particle size variation.

May, Douglas H.↗

A Stokes' velocity photographic method for measuring the size distribution of aerosols

Aerosol particles are allowed to settle in a vertical glass walled vessel, and their settling velocity is determined by photographing them while the light entering the camera is being chopped at a known rate. The settling velocity of each particle can be determined from the photographs, and by applying the Stokes' law, one can calculate the radius of each particle. The Stokes' law for a sphere settling freely in a quiet medium is given. If the volume of the photographed region of the illumination is known, the aerosol number density and size distribution can be obtained. Experiments with alumina particles of given size distributions indicate that the method works accurately. One set of a typical experiment with 3.0-micrometer Al2O3 particles is presented, which shows that the measured size distribution peaks at approximately 3.0 micrometer.

Deepak, A.↗

Parameterizing the Raindrop Size Distribution

This paper addresses the problem of finding a parametric form for the raindrop size distribution (DSD) that(1) is an appropriate model for tropical rainfall, and (2) involves statistically independent parameters. Such a parameterization is derived in this paper. One of the resulting three "canonical" parameters turns out to vary relatively little, thus making the parameterization particularly useful for remote sensing applications. In fact, a new set of r drop-size-distribution-based Z-R and k-R relations is obtained. Only slightly more complex than power laws, they are very good approximations to the exact radar relations one would obtain using Mie scattering. The coefficients of the new relations are directly related to the shape parameters of the particular DSD that one starts with. Perhaps most important, since the coefficients are independent of the rain rate itself, the relations are ideally suited for rain retrieval algorithms.

Haddad, Ziad S.↗

Size Distributions of Solar Flares and Solar Energetic Particle Events

We suggest that the flatter size distribution of solar energetic proton (SEP) events relative to that of flare soft X-ray (SXR) events is primarily due to the fact that SEP flares are an energetic subset of all flares. Flares associated with gradual SEP events are characteristically accompanied by fast (much > 1000 km/s) coronal mass ejections (CMEs) that drive coronal/interplanetary shock waves. For the 1996-2005 interval, the slopes (alpha values) of power-law size distributions of the peak 1-8 Angs fluxes of SXR flares associated with (a) >10 MeV SEP events (with peak fluxes much > 1 pr/sq cm/s/sr) and (b) fast CMEs were approx 1.3-1.4 compared to approx 1.2 for the peak proton fluxes of >10 MeV SEP events and approx 2 for the peak 1-8 Angs fluxes of all SXR flares. The difference of approx 0.15 between the slopes of the distributions of SEP events and SEP SXR flares is consistent with the observed variation of SEP event peak flux with SXR peak flux.

Solar Flares↗

Aerosol size distributions - Remote determination from air-borne measurements of the solar aureole

Aerosol-size distributions were determined remotely using an airborne scanning photometer. This instrument consists of a sunshade, optics, and a large-dynamic-range photodetector-amplifier system that scans about the vertical, recording both the direct attenuated solar beam and the diffuse sky radiance in the almucantar of the sun at an effective wavelength of 0.54 micron. Inversion of the measured radiances determined aerosol radii from approximately 0.2 to 8.0 microns. Data were taken during flights over western Lake Superior and southwestern Wisconsin. Inverted aerosol-size distributions are compared with results obtained by other methods.

Twitty, J. T.↗

Particle size distributions and the vertical distribution of suspended matter in the upwelling region off Oregon

Various methods of presenting and mathematically describing particle size distribution are explained and evaluated. The hyperbolic distribution is found to be the most practical but the more complex characteristic vector analysis is the most sensitive to changes in the shape of the particle size distributions. A method for determining onshore-offshore flow patterns from the distribution of particulates was presented. A numerical model of the vertical structure of two size classes of particles was developed. The results show a close similarity to the observed distributions but overestimate the particle concentration by forty percent. This was attributed to ignoring grazing by zooplankton. Sensivity analyses showed the size preference was most responsive to the maximum specific growth rates and nutrient half saturation constants. The verical structure was highly dependent on the eddy diffusivity followed closely by the growth terms.

Kitchen, J. C.↗

Deviations from the straight line: Bumps (and grinds) in the collisionally evolved size distribution of asteroids

Dohnanyi established that the size distribution of a collisionally relaxed population is a power-law with a -3.5 slope (incremental diameter), provided that: (1) collisional parameters are independent of size and (2) there is no lower limit on the population size for shattering impacts. In the course of studying collisional effects over a wide range of asteroid sizes (cm up to hundreds of km range), we have investigated the consequences of relaxing the second condition, while maintaining the first one.

Davis, D. R.↗

A technique for measuring in situ size distribution of aerosols

A multistage cascade impactor instrument employing piezoelectric crystals for real-time aerosol size distribution measurements is described in this paper. The instrument measures the aerosol mass concentration as a function of particle size in 10 size intervals ranging from 0.05 micrometers to 25 micrometers in diameter. The particles are then analyzed for elemental composition and morphology by means of scanning electron microscopy (SEM). Examples of particle size distributions in rocket motor exhaust plumes measured with the instrument are presented together with the elemental composition and morphology obtained by SEM.

Woods, D. C.↗

Saturn's rings: Particle composition and size distribution as constrained by microwave observations. I - Radar observations

The radar backscattering characteristics of compositional and structural models of Saturn's rings are calculated and compared with observations of the absolute value, wavelength dependence, and degree of depolarization of the rings' radar cross section (reflectivity). The doubling method is used to calculate reflectivities for systems that are many particles thick using optical depths derived from observations at visible wavelengths. If the rings are many particles thick, irregular centimeter- to meter-sized particles composed primarily of water ice attain sufficiently high albedos and scattering efficiencies to explain the radar observations. In that case, the wavelength independence of radar reflectivity implies the existence of a broad particle size distribution; a narrower size distribution is also a possibility. Particles of primarily silicate composition are ruled out by the radar observations. Purely metallic particles may not be ruled out on the basis of existing radar observations. A monolayer of very large ice 'particles' that exhibit multiple internal scattering may not yet be ruled out.

Cuzzi, J. N.↗

On the Role of Friction and Particle Size Distribution in Granular Packings

Packing of particles in a disordered arrangement has tremendous significance in both condensed matter physics and engineering applications. The last three decades have seen remarkable progress in our understanding of the physics of granular packings that has been largely facilitated by a rapid growth in the power of modern computers. Although granular packings are ubiquitous in diverse natural settings, from clogging of powders in hoppers to the crowding of living cells, a significant motivation for modeling granular packings has emerged from a proposal that the transition from a fluid-like state to a solid-like state of a granular material upon increasing volume fraction, called jamming, is intimately related to the origins of glass transition in thermal systems. As such, a majority of modeling efforts have focused on the jamming behavior of an idealized granular material: frictionless, monodisperse sphere. While such studies have illuminated the rich physics of jamming, granular materials in nature and engineering practice are rarely frictionless or monodisperse. The analogous research on the packing of these ‘real-world’ granular materials is still not fully developed. Besides requiring the exploration of a huge parameter space, three key computational considerations have inhibited their modeling: (i) traditional computational methods are not adept at simulating mechanically-stable packings of frictional particles near the jamming transition; (ii) standard algorithms of contact detection in discrete element methods are impractical to simulate granular packings with a wide distribution of particle sizes; (iii) a lack of well-established contact mechanics models of friction that can accurately reproduce experimental data. This chapter will review the latest computational advances to simulate the jamming of size-dispersed frictional particles, and describe the rich microstructural diversity that emerges in their packings.

granular↗

Coarsening Up: Expanding the Particle Size Distributions of Lunar Simulants to Encompass A Comprehensive Range of Regolith Granularity

Due to a paucity of lunar regolith samples, simulated granular materials (simulants) have been developed and deployed for a variety of engineering and research purposes in an attempt to meet the requirements for lunar exploration. Broadly speaking, these manufactured materials aim to replicate the compositional (i.e., mineralogy and chemistry) and physical (e.g., particle size distribution, particle shape) profiles of lunar soil samples collected during the Apollo missions. While creating a “near-perfect” lunar simulant is prohibitive due to the unique formative processes (i.e., meteorite impacts, solar wind implantation) and conditions (anhydrous, reducing environment and exposure to radiation on the surface over billions of years) encountered on the moon, certain granular properties of the regolith can be recreated with a high level of fidelity by leveraging contemporary technologies. A fundamental physical property and descriptor, grain size can be correlated between samples and replicated through processing; however, a holistic understanding of the particle size distribution of lunar regolith must be considered when creating analog materials. This study produces particle size distributions for Apollo 16 returned samples, incorporating the sieved out >1 cm coarse-grained fraction, in order to provide a more comprehensive characterization of surficial lunar regolith grain sizes for the development of highlands-type granular analog testing materials.

R. N. Kovtun↗

Size distributions of solar energetic particle events

NASA particle detectors on the IMP-8 are employed to determine the size distributions of the peak fluxes of events related to solar-energetic particles including protons and electrons. The energetic proton events show a flatter size distribution which suggests that not all flares are proton flares. Both the electron and proton events are classified as either 'impulsive' or 'gradual', and the impulsive events tend to have a steeper power-law distribution.

Cliver, E.↗

Effect of the size distribution on the thermal emission from cometary dust

The IR thermal emission from cometary dust is analyzed by two size distribution functions, Sekanina A and a modified Sekanina Miller distribution. The resulting thermal emission spectra are illustrated for heliocentric distances 0.15 to 1.6 AU. The Sekania A distribution does not predict the observed heliocentric variation in the flux ratio I (4.8 micron) I (3.5 micron) for bright comets. A size distribution intermediate between the two presented is a better representation of the dust in recently observed comets.

Hanner, M. S.↗

Application of modified Twomey techniques to invert lidar angular scatter and solar extinction data for determining aerosol size distributions

Polarization properties of the angularly scattered laser light from a volume of air are used to determine the size distribution of the aerosol particles within the volume by the use of appropriate inversion techniques. Similar techniques are employed to determine a mean size distribution of the particulates within a vertical column through the atmosphere from determinations of the aerosol optical depth as a function of wavelength. In both of these examples, a modification of an inversion technique originally described by Twomey has been employed. Details of this method are presented as well as results from actual measurements employing bistatic lidar and solar radiometer.

Herman, B. M.↗

Latitudinal and altitudinal variation of size distribution of stratospheric aerosols inferred from SAGE aerosol extinction coefficient measurements at two wavelengths

A method of retrieving aerosol size distribution from the measured extinction of solar radiation at wavelengths of 0.45 microns and 1.0 microns has recently been proposed. This method is utilized to obtain latitudinal and altitudinal variations of size distributions of stratospheric aerosols from the Stratospheric Aerosol and Gas Experiment data for March 1979. Small particles are found in the lower stratosphere of the tropical region, and large particles are found at higher altitudes and latitudes in both hemispheres. Results of this study are consistent with the suggestion that the upper troposphere in tropical regions is a source of condensation nuclei in the stratosphere, and they become mature as they move to higher altitudes and latitude.

Yue, G. K.↗

Volcanic Signatures in Estimates of Stratospheric Aerosol Size, Distribution Width, Surface Area, and Volume Deduced from Global Satellite-Based Observations

Volcanic signatures in the stratospheric aerosol layer are revealed by two independent techniques which retrieve aerosol information from global satellite-based observations of particulate extinction. Both techniques combine the 4-wavelength Stratospheric Aerosol and Gas Experiment (SAGE) II extinction measurements (0.385 <= lambda <= 1.02 microns) with the 7.96 micron and 12.82 micron extinction measurements from the Cryogenic Limb Array Etalon Spectrometer (CLAES) instrument. The algorithms use the SAGE II/CLAES composite extinction spectra in month-latitude-altitude bins to retrieve values and uncertainties of particle effective radius R(sub eff), surface area S, volume V and size distribution width sigma(sub R). The first technique is a multi-wavelength Look-Up-Table (LUT) algorithm which retrieves values and uncertainties of R(sub eff) by comparing ratios of extinctions from SAGE II and CLAES (e.g., E(sub lambda)/E(sub 1.02) to pre-computed extinction ratios which are based on a range of unimodal lognormal size distributions. The pre-computed ratios are presented as a function of R(sub eff) for a given sigma(sub g); thus the comparisons establish the range of R(sub eff) consistent with the measured spectra for that sigma(sub g). The fact that no solutions are found for certain sigma(sub g) values provides information on the acceptable range of sigma(sub g), which is found to evolve in response to volcanic injections and removal periods. Analogous comparisons using absolute extinction spectra and error bars establish the range of S and V. The second technique is a Parameter Search Technique (PST) which estimates R(sub eff) and sigma(sub g) within a month-latitude-altitude bin by minimizing the chi-squared values obtained by comparing the SAGE II/CLAES extinction spectra and error bars with spectra calculated by varying the lognormal fitting parameters: R(sub eff), sigma(sub g), and the total number of particles N(sub 0). For both techniques, possible biases in retrieved-parameters caused by assuming a unimodal functional form are removed using correction factors computed from representative in situ measurements of bimodal size distributions. Some interesting features revealed by the LUT and PST retrievals include: (1) Increases in S and V (but not R(sub eff)) after the Ruiz and Kelut injections, (2) Increases in S, V, R(sub eff) after Pinatubo, (3) Post-Pinatubo increases in S, V, and R(sub eff) that are more rapid in the tropics than elsewhere, (4) Mid-latitude post-Pinatubo increases in R(sub eff) that lag increases in S and V, (5) S and V returning to pre-Pinatubo values sooner than R(sub eff) does, (6) Sharp increases in sigma(sub g), after Pinatubo and slight increases in sigma(sub g) after Ruiz, Etna, Kelut, Spurr and Rabaul, and (7) Gradual declines in the heights at which R(sub eff), S and V peak after Pinatubo.

Bauman, J. J.↗

Marked point process models of raindrop-size distributions

The principal process considered in this paper is the flux of raindrops through a volume of the atmosphere. This process is of fundamental importance for a wide variety of engineering and environmental problems, notably remote sensing of precipitation, infiltration of rainfall, soil erosion, atmospheric deposition of pollutants, and design of microwave communication systems. A marked point process model is developed in which the point process represents the arrival times of drops at the upper surface of a sample volume and the mark associated with a drop is its diameter. In the model, both the rate of occurrence of raindrops and the distribution of drop diameters vary randomly over time. Results that relate the drop-size distribution within the sample volume to the probability law of the drop-arrival process are presented. These results allow straightforward comparisons between temporal characterizations of drop-size distributions and spatial characterizations. Representations for derived processes such as rainfall rate and reflectivity are shown to be quite accurate using raindrop data from North Carolina.

Smith, James A.↗