Search NASA⌕ Search

SEARCH · Search NASA

Results for “Skewness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Flight demonstration of redundancy management algorithms for a skewed array of inertial sensors

Flight test results for two fault-tolerance algorithms developed for a redundant strapdown inertial measurement unit consisting of four 2-DOF gyros and accelerometers mounted on the faces of a semioctahedron are presented. Although both algorithms provided timely detection and isolation of flight control level failures, the generalized likelihood test algorithm provided more timely detection and isolation of low-level sensor failures than the edge vector test algorithm. The generalized likelihood test produced a false isolation for the case of a dual low-level failure applied to the sensitive axes of an accelerometer. Both of the algorithms were shown to provide dual fail-operational performance for the skewed array of inertial sensors.

Morrell, F. R.↗
NASA NTRS1989

Autonomous fault-tolerant attitude reference system using DTGs in symmetrically skewed configuration

A novel symmetrically skewed configuration for an attitude reference system (ARS) using three dynamically tuned gyros (DTGs) is developed. Simple schemes for autonomous detection and identification of a faulty DTG in real time and subsequent reconfiguration of the attitude estimation algorithm are proposed. The performance of the present configuration is shown to be better than that of configurations proposed earlier, and it is shown to have better features. It tolerates all types of failures of DTG failures, requires very simple computations, and gives less error in attitude estimate than the other configurations.

Murugesan, S.↗
NASA NTRS1991

On the rotation and skew-symmetric forms for incompressible flow simulations

A variety of numerical simulations of transition and turbulence in incompressible flow are presented to compare the commonly used rotation form with the skew-symmetric (and other) forms of the nonlinear terms. The results indicate that the rotation form is much less accurate than the other forms for spectral algorithms which include aliasing errors. For de-aliased methods the difference is minimal.

Zang, Thomas A.↗
NASA NTRS1992

Analytical shape sensitivities and approximations of modal response of generally laminated tapered skew plates

In the present determination of the derivatives of natural frequencies and mode shapes of a generally laminated tapered skew plate, with respect to various shape parameters, springs are used to simulate the essential boundary conditions. The independent shape parameters are plate surface area, aspect ratio, taper ratio, and sweep angle. Eigenvalues and eigenvectors are approximated over the range of the variable using linear, exponential, and pseudoexponential approximation schemes, and are compared with reanalysis-obtained values. Numerical results are presented for symmetrically and unsymmetrically laminated plates.

Singhvi, Sarvesh↗
NASA NTRS1991

Progress in understanding the renormalization group skewness and kappa-epsilon models

The immediate goal is to understand and validate the Yakhot-Orszag model of the velocity-derivative skewness and model equation for the rate of energy dissipation epsilon. A summary of a more detailed manuscript in preparation is presented. The purpose is to clarify some limitations of the theory by careful examination of key assumptions and approximations, and thereby to encourage its improvement.

Smith, Leslie M.↗
NASA NTRS1948

Tests of a Triangular Wing of Aspect Ratio 2 in the Ames 12-foot Pressure Wind Tunnel III : the Effectiveness and Hinge Moments of a Skewed Wing-tip Flap

Results of wind-tunnel tests of a semispan model of a triangular wing of aspect ratio 2 with a skewed wing-tip flap are presented. Lift, drag, pitching-moment, and hinge-moment data are included for subsonic Mach numbers up to 0.95. The flap showed extremely high hinge moments and low effectiveness as a longitudinal control. Although less affected by compressibility, this flap is indicated to be inferior to a constant-chord flap when applied to this triangular wing.

MACH NUMBER EFFECTS - COMPLETE WINGS↗
NASA NTRS1994

Making Skew-Resistant Fabrics For Composite Layups

Fabrics used in curved composite-material structures prevented from skewing during composite layup by weaving them in modified process in which warp and fill yarns bonded together at their points of contact. (Bonding concept may prove similarly beneficial for braided and knitted fabrics.) In modified weaving process, adhesives prevent excessive shifting of warp and fill yarns with respect to each other.

Farley, Gary L.↗
NASA NTRS1993

Effects of rotation on coolant passage heat transfer. Volume 2: Coolant passages with trips normal and skewed to the flow

An experimental program was conducted to investigate heat transfer and pressure loss characteristics of rotating multipass passages, for configurations and dimensions typical of modem turbine blades. This experimental program is one part of the NASA Hot Section Technology (HOST) Initiative, which has as its overall objective the development and verification of improved analysis methods that will form the basis for a design system that will produce turbine components with improved durability. The objective of this program was the generation of a data base of heat transfer and pressure loss data required to develop heat transfer correlations and to assess computational fluid dynamic techniques for rotating coolant passages. The experimental work was broken down into two phases. Phase 1 consists of experiments conducted in a smooth wall large scale heat transfer model. A detailed discussion of these results was presented in volume 1 of a NASA Report. In Phase 2 the large scale model was modified to investigate the effects of skewed and normal passage turbulators. The results of Phase 2 along with comparison to Phase 1 is the subject of this Volume 2 NASA Report.

Johnson, B. V.↗
NASA NTRS2008

Discovery of the Red-Skewed K-alpha Iron Line in Cyg X-2 with Suzaku

We report on the Suzaku observation of neutron star low-mass X-ray binary Cygnus X-2 which reveals strong iron K-alpha emission line. The line profile shows a prominent red wing extending down to 4 keV. This discovery increases the number of neutron star sources where red-skewed iron lines were observed and strongly suggests that this phenomenon is common not only in black holes but also in other types of compact objects. We examine the line profile by fitting it with the model which attributes its production to the relativistic effects due to disk reflection of X-ray radiation. We also apply an alternative model where the red wing is a result of down-scattering effect of the first order with respect to electron velocity in the wind outflow. Both models describe adequately the observed line profile. However, the X-ray variability in a state similar to that in the Suzaku observation which we establish by analysing RXTE observation favors the wind origin of the line formation.

Shaposhnikov, Nikolai↗
NASA NTRS2013

Incorporating Skew into RMS Surface Roughness Probability Distribution

The standard treatment of RMS surface roughness data is the application of a Gaussian probability distribution. This handling of surface roughness ignores the skew present in the surface and overestimates the most probable RMS of the surface, the mode. Using experimental data we confirm the Gaussian distribution overestimates the mode and application of an asymmetric distribution provides a better fit. Implementing the proposed asymmetric distribution into the optical manufacturing process would reduce the polishing time required to meet surface roughness specifications.

Stahl, Mark T.↗
NASA NTRS2015

Measuring Skew in Average Surface Roughness as a Function of Surface Preparation

Characterizing surface roughness is important for predicting optical performance. Better measurement of surface roughness reduces grinding saving both time and money and allows the science requirements to be better defined. In this study various materials are polished from a fine grind to a fine polish. Each sample's RMS surface roughness is measured at 81 locations in a 9x9 square grid using a Zygo white light interferometer at regular intervals during the polishing process. Each data set is fit with various standard distributions and tested for goodness of fit. We show that the skew in the RMS data changes as a function of polishing time.

Stahl, Mark T.↗
NASA NTRS2015

Measuring Skew in Average Surface Roughness as a Function of Surface Preparation

Characterizing surface roughness is important for predicting optical performance. Better measurement of surface roughness reduces polishing time, saves money and allows the science requirements to be better defined. This study characterized statistics of average surface roughness as a function of polishing time. Average surface roughness was measured at 81 locations using a Zygo white light interferometer at regular intervals during the polishing process. Each data set was fit to a normal and Largest Extreme Value (LEV) distribution; then tested for goodness of fit. We show that the skew in the average data changes as a function of polishing time.

Stahl, Mark↗
NASA NTRS2019

Oil Dispersant Corexit 9500 Is Weakly Estrogenic, but Does Not Skew the Sex Ratio in Alligator Mississippiensis

During the Deepwater Horizon oil spill, vast quantities of the chemical dispersant Corexit 9500 were applied in remediation efforts. In addition to the acute toxicity and obesogenicity of Corexit, it is important to further evaluate Corexit with long-term sublethal endocrine endpoints. The American alligator (Alligator mississippiensis) exhibits temperature-dependent sex determination, in which egg incubation temperatures during a thermosensitive period (TSP) in embryonic development determine sex of the embryos. Estrogen signals also play critical roles in this process. For example, a single exposure to exogenous estrogen during the TSP overrides the effects of temperature and leads to skewed sex ratios. At a dose of 100 ppm, Corexit significantly induced transcriptional activity of both alligator nuclear estrogen receptors 1 and 2 in vitro using the reporter gene assays. To investigate the estrogenic effects on gonadal development in ovo, alligator eggs were exposed to Corexit at environmentally relevant concentrations (0.25, 2.5, and 25 ppm) prior to the TSP. Significant delays in the hatching and growth were observed in 0.25 and 25 ppm Corexit exposed groups. At one week of age, no significant effects on sex ratios or testicular mRNA abundance were observed as a result of exposure to Corexit at the tested exposure levels, suggesting Corexit does not have strong estrogenic activity in ovo. Further investigations are required using individual components of Corexit to better understand their estrogenic effects on the development and reproductive health of alligators and other coastal aquatic wildlife.

Nicole Mcnabb↗
DOE OSTI2021

Determination of a most representative cycle from cylinder pressure ensembles via statistical method using distribution skewness

In internal combustion engine research, cylinder pressure measurements provide valuable information about the underlying thermodynamic and combustion processes, and are typically collected in ensembles of several 100 traces. Although in some particular fields of combustion research all traces are analyzed, in most cases only one trace is studied because analyzing all the traces is impractical due to the large number of collected samples. Instead, an ensemble-averaged pressure trace is commonly calculated and used for analysis. However, this pressure trace is highly smoothed and dynamic information is lost during the averaging process. With the average trace, pressure rise rates are lower and pressure oscillations such as the ones resulting from combustion knock are lost. In this work, a statistical method was developed to determine the “most representative cycle,” which is the cycle from the ensemble that has the pressure trace most representative of the engine operating condition. Eleven characteristic parameters are computed from each pressure trace and probabilistic distributions are obtained for each of the parameters using all the traces in the ensemble. Finally, the most representative cycle is selected by means of a cost function minimization. The benefits of this method are illustrated using experimental data from four very different engine platforms, under four different combustion modes and over a range of operating conditions.

42 ENGINEERING↗