Search NASASearch

SEARCH · Search NASA

Results for “Slope”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Slope Efficiency and Voltage Reduction at High Current Densities in AlInGaAs Diode Lasers

Here, the slope efficiency and drive voltage of broad area AlInGaAs laser diodes near 865 nm is observed to decrease significantly under quasi-CW pulsed operation at currents well above threshold, in a manner that cannot be explained by thermal effects or carrier leakage over heterojunction barriers. Simulations show that the slope efficiency reduction is explicable by increased free carrier absorption in the waveguide region. Empirical formulas are presented to represent these effects in a closed analytic form suitable for use in simulators for diode-pumped laser systems.

47 OTHER INSTRUMENTATION

Temperature Inversions below 1 km from a V-Band Scanning Radiometer at the North Slope of Alaska

A single-channel (56.7 GHz) scanning radiometer was deployed in August 2022 at the Atmospheric Radiation Measurement (ARM) North Slope of Alaska site near Utqiaġvik. The radiometer is designed to provide temperature profiles between 0 and 1 km every 5 min. Averaging kernels show that this single-channel radiometer, taking observations at 10 discrete elevation angles, yields approximately the same information as a seven-channel V-band radiometer scanning three elevation angles. The instrument is able to reproduce the occurrence of temperature inversions between the surface and 1 km and their strength showing a correlation of 0.85, bias of −0.6 K, and slope of 1.04 with respect to radiosondes. Uncertainty in the inversion base height varies from 50 m near the surface to ∼300 m above 0.4 km when compared with radiosondes. Conversely, the inversion top height is overestimated and has higher uncertainty due to the degrading effects of the averaging kernels on the vertical resolution of the retrievals. Thanks to the high temporal resolution of the retrievals, the diurnal cycle of boundary layer temperature was evaluated showing that the radiometer can capture some aspects of the boundary layer thermal structure. The present analysis provides an overview of the capabilities of this simple observing configuration for selected applications.

Atmospheric profilers

Reference Shapefiles and Pre-trained Random Forest Classification Models for Detecting Aufeis on the North Slope of Alaska in Landsat Imagery

This dataset provides shapefiles and trained machine learning models used for aufeis detection at four sites on the North Slope of Alaska. It includes reference data for evaluating Landsat-based detection methods, supporting research on remote sensing approaches for identifying aufeis. The ReferenceData folder contains ArcGIS shapefiles of semi-automated land cover classifications for 217 Landsat Collection 2 images, categorizing pixels into six classes: aufeis, snow, ground, none, water, and cloud. The SiteBuffers.zip file includes 10-kilometer buffer shapefiles defining regions of interest around four aufeis fields (Canning21, FH1, Firth, and Kuparuk), used to test three detection techniques. Additionally, the TrainedRFModels folder contains six pre-trained Scikit-Learn Random Forest classifiers (100 trees, max depth = 30) designed to predict aufeis presence in Landsat Collection 2 Surface Reflectance images using Red, Blue, SWIR2, NDVI, and NDWI bands. This dataset supports the development and validation of remote sensing methods for mapping aufeis in Arctic environments.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES

A Simplified Method for Estimating Subsonic Lift-Curve Slope at Low Angles of Attack for Irregular Planform Wings

A simplified method is presented for estimating the lift-curve slope of irregular planform wings at subsonic speeds and low angles of attack. The present process is an extension of the method derived in NACA Technical Note 3911 and enables quick estimates of subsonic liftcurve slope, to be made whereas more refined procedures require considerable time and computation. Comparison of experimental and estimated values for a wide range of wing planforms having discontinuous spanwise sweep variation indicates good agreement. A comparison of the present procedure with a 20-step vortex method (NACA Research Memorandum L50L13) indicated good agreement for a variable-sweep configuration.

Spencer, Bernard, Jr.

Composite filter steepens rejection slopes in microwave application

Composite filter is used to obtain sharp rejection slopes in microwave transmission by filtering techniques. It consists of a bandpass filter to shape the passband and a bandreject filter on each edge of the bandpass filter to steepen the rejection slopes.

Source record

Measurement of surface roughness slope

Instrument, consisting of isolator, differentiator, absolute value circuit, and integrator, uses output signal from surface texture analyzer profile-amplifier to calculate surface roughness slope. Calculations provide accurate, instantaneous value of the slope. Instrument is inexpensive and applicable to any commerical surface texture analyzer.

Cassidy, J. F.

Digital slope-threshold data compressor

Slope-threshold compression scheme for telemetered video data is efficient, and its principle of operation is as follows: when slope of raw data exceeds threshold decision reference, previous sample is transmitted. All-digital design is more economical than analog system. It exhibits well-defined accuracy, provides unlimited storage time, and is convenient and reliable.

Anderson, T. O.

Frequency distributions of lunar slopes, part C

The metric and panoramic cameras aboard the Apollo 16 spacecraft provided photographs on which photogrammetric techniques may be used to obtain precise measurements of horizontal distances and elevations. It is reported that these measurements may in turn be used to obtain slope-frequency distributions of lunar surfaces at various slope lengths and for various types of terrain and geologic map units. Bistatic radar and photoclinometric methods were also used to obtain the same data.

Wu, S. S. C.

Tensile and fatigue data for irradiated and unirradiated AISI 310 stainless steel and titanium - 5 percent aluminum - 2.5 percent tin: Application of the method of universal slopes

Irradiated and unirradiated tensile and fatigue specimens of AISI 310 stainless steel and Ti-5Al-2.5Sn were tested in the range of 100 to 10,000 cycles to failure to determine the applicability of the method of universal slopes to irradiated materials. Tensile data for both materials showed a decrease in ductility and increase in ultimate tensile strength due to irradiation. Irradiation caused a maximum change in fatigue life of only 15 to 20 percent for both materials. The method of universal slopes predicted all the fatigue data for the 310 SS (irradiated as well as unirradiated) within a life factor of 2. For the titanium alloy, 95 percent of the data was predicted within a life factor of 3.

Debogdan, C. E.

A slope reversal video processor having amplitude and pulse width discrimination.

A timing discriminator whose output is relatively insensitive to input pulse width and amplitude is described. The video-handling technique is known as slope reversal processing and is based on tapped delay line estimation methods. The concept, design, breadboard construction, and preliminary laboratory test results are reviewed. The processor system features (1) a peak input voltage dynamic range of 80x starting at 100 microvolts; (2) a four stage preamplifier/line-driver having a voltage gain of 2400x; (3) a tapped delay-line estimator implemented for slope reversal triggering by differential comparison; (4) a nominal plus or minus 2.5 nsec shift of the output trigger leading edge over the entire input voltage range, (5) up to 7 dB discrimination against pulse widths less than 35 nsec; and (6) up to one order of magnitude reduction in the false alarm rate compared to a constant fraction system.

Hoge, F. E.

Comparison between photogrammetric and bistatic-radar slope frequency distributions

A comparison was made of the results for lunar surface roughness estimates and slope frequency distributions obtained by using photogrammetric techniques with those obtained by using bistatic radar. Three topics were discussed: (1) the form of the slope frequency distributions, (2) the change of roughness estimates of the lunar surface with scale, and (3) the magnitude of surface roughness.

Moore, H. J.

Laser probe for measuring 2-D wave slope spectra of ocean capillary waves

A laser-optical instrument for use in determining the two-dimensional wave-slope spectrum of ocean capillary waves is described. The instrument measures up to a 35-deg tip angle of the surface normal by measuring the position of a refracted laser beam directed vertically upward through a water surface. A telescope, a continuous two-dimensional Schottky barrier photodiode, and a pair of analog dividers render the signals independent of water height and insensitive to laser-beam intensity fluctuations. Calibration is performed entirely in the laboratory before field use. Sample records and wave-slope spectra are shown for one-dimensional wave-tank tests and for two-dimensional ocean tests. These are presented along with comparison spectra for calm and choppy water conditions. A mechanical wave follower was used to adjust the instrument position in the presence of large ocean swell and tides.

Palm, C. S.

CCN-supersaturation spectra slopes (k)

Theoretically the slope k of a CCN-supesaturation spectrum should equal two thirds of the slope of the total (soluble) aerosol size distribution. Workshop results tended to verify this relation. The k values are markedly different depending on whether one is measuring ambient CCN concentrations at supersaturations S above or below approximately 0.1-0.2%. The larger k values for S approximately 0.1% is consistent with the greater decrease in large particle concentration with increasing size. It is concluded that over the S range of 0.02% to 2%, two power fits (and k values) may sometimes suffice for a reasonable approximation of the CCN distribution. At other times, and with laboratory generated aeosols, such an approach is inadequate and requires refinement.

Jiusto, J. E.

Topographic slope correction for analysis of thermal infrared images

A simple topographic slope correction using a linearized thermal model and assuming slopes less than about 20 degrees is presented. The correction can be used to analyzed individual thermal images or composite products such as temperature difference or thermal inertia. Simple curves are provided for latitudes of 30 and 50 degrees. The form is easily adapted for analysis of HCMM images using the DMA digital terrain data.

Watson, K.

Depositional history of core 15008/7 - Some implications regarding slope processes

Structures and associated vertical changes in lithology of core 15008/7 are discussed with a view to providing data for interpretation of regolith-forming and accumulation processes that can take place on a continuous slope upon an impact-dominated surface. The light-colored soil between 49.1 and 55.6 cm in core 15007 is rich in clasts which contain abundant green glass and appears to be ejecta from downslope. The dark massive soils between 17.5 and 49.1 cm contain many crater bottom structures and crater fill, but apparently no rim-crest or proximal ejecta. The higher parts of the crater deposits appear to be removed by erosion, whereas the crater fill is preferentially preserved. Such material may be typical of slope deposits. The light-colored soil with contorted, friable clasts, between 0 and 17.5, appears to be ejecta from the crater seen in the sampling photographs.

Nagle, J. S.

Evolution of the cluster X-ray luminosity function slope

The results of an X-ray survey of 58 clusters of galaxies at moderate and high redshifts are reported. Using a luminosity-limited subsample of 25 objects, it is found that to a redshift of 0.5 the slope of the luminosity function of distant clusters is independent of redshift and consistent with that of nearby clusters. The time scale for change in the slope must be greater than 9 billion years. The implications of the data for theoretical models are discussed. In particular, Perrenod's models (1980) with high Omega are excluded by the present data.

Henry, J. P.

Deployment of a Secondary Concentrator to Increase the Intercept Factor of a Dish with Large Slope Errors

The testing of a hyperbolic trumpet non-imaging secondary concentrator with a parabolic dish having slope errors of about 10 mrad is reported. The trumpet, which has a concentration ratio of 2.1, increased the flux through a 141-mm focal aperture by 72%, with an efficiency of 96%, thus demonstrating its potential for use in tandem with cheap dishes having relatively large slope errors.

Ortabasi, U.