Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sn”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

GeP and (Ge{sub 1−x}Sn{sub x})(P{sub 1−y}Ge{sub y}) (x≈0.12, y≈0.05): Synthesis, structure, and properties of two-dimensional layered tetrel phosphides

GeP and Sn-doped GeP were synthesized from elements in bismuth and tin flux, respectively. The layered crystal structures of these compounds were characterized by single crystal X-ray diffraction. Both phosphides crystallize in a GaTe structure type in the monoclinic space group C2/m (No. 12) with GeP: a=15.1948(7) Å, b=3.6337(2) Å, c=9.1941(4) Å, β=101.239(2)°; Ge{sub 0.93(3)}P{sub 0.95(1)}Sn{sub 0.12(3)}: a=15.284(9) Å, b=3.622(2) Å, c=9.207(5) Å, β=101.79(1)°. The crystal structure of GeP consists of 2-dimensional GeP layers held together by weak electron lone pair interactions between the phosphorus atoms that confine the layer. Each layer is built of Ge–Ge dumbbells surrounded by a distorted antiprism of phosphorus atoms. Sn-doped GeP has a similar structural motif, but with a significant degree of disorder emphasized by the splitting of all atomic positions. Resistivity measurements together with quantum-chemical calculations reveal semiconducting behavior for the investigated phosphides. - Graphical abstract: Layered phosphides GeP and Sn-doped GeP were synthesized from elements in bismuth and tin flux, respectively. The crystal structure of GeP consists of 2-dimensional GeP layers held together by weak electron lone pair interactions between the phosphorus atoms that confine the layer. Sn-doped GeP has a similar structural motif with a significant degree of disorder emphasized by the splitting of all atomic positions. Resistivity measurements together with quantum-chemical calculations reveal semiconducting behavior for the investigated phosphides. - Highlights: • GeP crystallizes in a layered crystal structure. • Doping of Sn into GeP causes large structural distortions. • GeP is narrow bandgap semiconductor. • Sn-doped GeP exhibits an order of magnitude higher resistivity due to disorder.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Semiconducting Ba 3 Sn 3 Sb 4 and Metallic Ba 7– x Sn 11 Sb 15– y ( x = 0.4, y = 0.6) Zintl Phases

In this paper, we report the discovery of two ternary Zintl phases Ba 3 Sn 3 Sb 4 and Ba 7-x Sn 11 Sb 15-y , (x = 0.4, y = 0.6). Ba 3 Sn 3 Sb 4 adopts the monoclinic space group P2 1 /c with a = 14.669(3) Å, b = 6.9649(14) Å, c = 13.629(3) Å, and β = 104.98(3)°. It features a unique corrugated two-dimensional (2D) structure consisting of [Sn 3 Sb 4 ] 6- layers extending along the ab plane with Ba 2+ atoms sandwiched between them. The non-stoichiometric Ba 6.6 Sn 11 Sb 14.4 has a complex one-dimensional (1D) structure adopting the orthorhombic space group Pnma, with unit cell parameters a = 37.964(8) Å, b = 4.4090(9) Å and c = 24.682(5) Å. It consists of large double Sn-Sb ribbons separated by Ba 2+ atoms. Ba3Sn3Sb4 is an n-type semiconductor which has a narrow energy gap of ~0.18 eV and a room temperature carrier concentration of ~4.2 × 10 18 cm -3 . Lastly, Ba 6.6 Sn 11 Sb 14.4 is determined to be a metal with electrons being the dominant carriers.

36 MATERIALS SCIENCE↗

Surface Sn(IV) Hydrolysis Improves Inorganic Sn–Pb Perovskite Solar Cells

Cesium tin-lead (Sn-Pb) perovskites are exceptional for their combined capabilities in unlocking ideal bandgaps for solar cells and mitigating the stability issue faced by their hybrid organic-inorganic counterparts. But the development of high-performance solar cells using these materials is retarded by their inherent high density of detrimental Sn(IV) defects. Herein, we demonstrate a sequential surface treatment method, which entails a Sn(II) halide treatment to displace the buried Sn(IV) ions underneath the film surface, followed by a H 2 O treatment to hydrolyze the displaced Sn(IV) ions. The surface treatment induces chemical and microstructural reconstructions that significantly improve the optoelectronic properties and stability of perovskites. As a result, a power conversion efficiency of 16.79% and a T 90 stability of 958 h are achieved, topping all previously reported performance parameters for inorganic Sn-Pb PSCs. This achievement further shortens the performance gap between all-inorganic and hybrid organic- inorganic Sn-Pb PSCs with sub-1.4 eV bandgaps.

14 SOLAR ENERGY↗

Stability Frontiers in the AM 6 X 6 Kagome Metals: The Ln Nb 6 Sn 6 ( Ln :Ce–Lu,Y) Family and Density-Wave Transition in LuNb 6 Sn 6

The kagome motif is a versatile platform for condensed matter physics, hosting rich interactions between magnetic, electronic, and structural degrees of freedom. In recent years, the discovery of a charge density wave (CDW) in the AV 3 Sb 5 superconductors and structurally-derived bond density waves (BDW) in FeGe and ScV 6 Sn 6 have stoked the search for new kagome platforms broadly exhibiting density wave (DW) transitions. Here, in this work, we evaluate the known AM 6 X 6 chemistries and construct a stability diagram that summarizes the structural relationships among the >125 member family. Subsequently, we introduce our discovery of the broader LnNb 6 Sn 6 (Ln:Ce–Nd,Sm,Gd–Tm,Lu,Y) family of kagome metals and an analogous DW transition in LuNb 6 Sn 6 . Our X-ray scattering measurements clearly indicate a (1/3, 1/3, 1/3) ordering wave vector (√$\bar{3}$ x √$\bar{3}$ x $3$ superlattice) and diffuse scattering on half-integer L-planes. Our analysis of the structural data supports the “rattling mode” DW model proposed for ScV 6 Sn 6 and paints a detailed picture of the steric interactions between the rare-earth filler element and the host Nb–Sn kagome scaffolding. We also provide a broad survey of the magnetic properties within the HfFe 6 Ge 6 -type LnNb 6 Sn 6 members, revealing a number of complex antiferromagnetic and metamagnetic transitions throughout the family. This work integrates our new LnNb 6 Sn 6 series of compounds into the broader AM 6 X 6 family, providing new material platforms and forging a new route forward at the frontier of kagome metal research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the Sn loss from thin films of the material system Cu-Zn-Sn-S in high vacuum

In this paper the Sn loss from thin films of the material system Cu-Zn-Sn-S and the subsystems Cu-Sn-S and Sn-S in high vacuum is investigated. A combination of in situ x-ray diffractometry and x-ray fluorescence (XRF) at a synchrotron light source allowed identifying phases, which tend to decompose and evaporate a Sn-containing compound. On the basis of the XRF results a quantification of the Sn loss from the films during annealing experiments is presented. It can be shown that the evaporation rate from the different phases decreases according to the order SnS{yields}Cu{sub 2}SnS{sub 3}{yields}Cu{sub 4}SnS{sub 4}{yields}Cu{sub 2}ZnSnS{sub 4}. The phase SnS is assigned as the evaporating compound. The influence of an additional inert gas component on the Sn loss and on the formation of Cu{sub 2}ZnSnS{sub 4} thin films is discussed.

36 MATERIALS SCIENCE↗

High-resolution measurement of the {sup 118,124}Sn(p,t){sup 116,122}Sn reactions: Shell-model and microscopic distorted-wave Born approximation calculations

The {sup 118,124}Sn(p,t){sup 116,122}Sn reactions have been investigated in high-resolution experiments at incident proton energies of 24.6 and 25 MeV, respectively. Angular distributions for 55 transitions to levels of {sup 116}Sn and 63 transitions to levels of {sup 122}Sn, up to excitation energies of {approx}3.850 and {approx}4.000 MeV, respectively, have been measured. The spin and parity identification was carried out by means of a distorted-wave Born approximation (DWBA) analysis, performed by using conventional Woods-Saxon potentials. A shell-model study of {sup 116}Sn and {sup 122}Sn nuclei was performed using a realistic two-body effective interaction derived from the CD-Bonn nucleon-nucleon potential. The doubly magic nucleus {sup 132}Sn was assumed as a closed core, with the 16 and 10 valence neutron holes occupying the five levels of the 50-82 shell. The energy spectra have been calculated and compared with the experimental ones, and the theoretical two-nucleon spectroscopic amplitudes, evaluated in a truncated seniority space, have been used in the microscopic DWBA calculation of some cross-section angular distributions of both reactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

SN 2012cg: Evidence for interaction between a normal SN Ia and a non-degenerate binary companion

We report evidence for excess blue light from the Type Ia supernova (Sn Ia) SN 2012cg at 15 and 16 days before maximum B-band brightness. The emission is consistent with predictions for the impact of the supernova on a non-degenerate binary companion. This is the first evidence for emission from a companion to a normal SN Ia. Sixteen days before maximum light, the B−V color of SN 2012cg is 0.2 mag bluer than for other normal SN Ia. At later times, this supernova has a typical SN Ia light curve, with extinction-corrected M{sub B}=−19.62±0.02 mag and Δm{sub 15}(B)=0.86±0.02. Our data set is extensive, with photometry in seven filters from five independent sources. Early spectra also show the effects of blue light, and high-velocity features are observed at early times. Near maximum, the spectra are normal with a silicon velocity v{sub Si} = −10,500 km s{sup −1}. Comparing the early data with models by Kasen favors a main-sequence companion of about six solar masses. It is possible that many other SN Ia have main-sequence companions that have eluded detection because the emission from the impact is fleeting and faint.

79 ASTRONOMY AND ASTROPHYSICS↗

Analysis of the photospheric epoch spectra of type 1a supernovae SN 1990N and SN 1991T

This paper presents an LTE analysis of the photospheric epoch optical and IUE UV spectra of the recent Type Ia supernovae SN 1990N and SN 1991T. It is found that SN 1990N has matter moving as fast as 40,000 km/s, while SN 1991T has matter moving as fast as 20,000 km/s. The exponential density profile with e-folding velocity of 3160 km/s suggested by deflation and delayed/late-detonation explosion models is adequate for calculating fits to the observed spectra. Findings on the iron peak elements suggest that in both SNe some nuclear burning continues into the outer ejecta or the newly synthesized elements are mixed into the outer ejecta. The observed spectra of SN 1990N are consistent with a composition of the inner envelope like that of model W7. Intermediate-mass elements with abundances higher than solar are probably in the outer ejecta of both SNe, while silicon, sulfur, and calcium are underabundance in SN 1991T relative to SN 1990N by factors of order 3, 3, and 120, respectively.

Jeffery, David J.↗

Over 11% Efficient Eco-Friendly Kesterite Solar Cell: Effects of S-Enriched Surface of Cu2ZnSn(S,Se)4 Absorber and Band Gap Controlled (Zn,Sn)O Buffer

For high efficiency kesterite Cu2ZnSn(S,Se)4 (CZTSSe) solar cell, CdS thin film was usually used as a buffer layer. However, due to the toxicity of Cd and pollution problems involved from the solution-based chemical bath deposition, eco-friendly high efficiency CZTSSe solar cell with Cd-free buffer is necessary. As an Cd-free buffer layer, we investigated (Zn,Sn)O (ZTO) film deposited by sputtering method. In order to achieve high power conversion efficiency, we controlled energy band gaps of CZTSSe absorber as well as ZTO buffer, which was required to optimize conduction band offset (CBO) between the absorber and the buffer and to increase open circuit voltage (Voc) and fill factor (FF). The CBO was optimized by controlling the band gap of ZTO. By varying the Sn/(Zn + Sn) ratio and its deposition temperature, band gap of ZTO was successfully adjusted. Experimental and computational calculation results showed that solar cell performance was strongly affected by the CBO between absorber and buffer. Besides CBO matching, larger band gap of ZTO improved short circuit current density (Jsc) with enhanced external quantum efficiency value in blue photon spectrum range. As an additional way to improve power conversion efficiency of solar cell, band graded CZTSSe absorber was developed by using spray-based two-step process. The sprayed CZTSSe film was engineered to have S-enriched surface, which makes surface band gap widened and surface passivated, and resultantly increases Voc, Jsc and fill factor (FF). By controlling band gaps of both CZTSSe absorber and ZTO buffer, we obtained 11.22% environment-friendly CZTSSe solar cell without MgF2 anti-reflection coating.

(Zn↗

Analogous intruder behavior near Ni, Sn, and Pb isotopes

Near shell closures, the presence of unexpected states at low energies provides a critical test of our understanding of the atomic nucleus. New measurements for the N = 42 isotones $69\atop{27}$Co and $71\atop{29}$Cu, along with recent data and calculations in the Ni isotopes, establish a full set of complementary, deformed, intruder states astride the closed-shell 28 Ni isotopes. In addition, nuclei with a one-proton hole or one-proton particle adjacent to Z = 28 were populated in β-decay experiments and in multinucleon transfer reactions. A β-decaying isomer, with a 750(250)-ms half-life, has been identified in $69\atop{27}$Co 42 . It likely has low spin and accompanies the previously established 7/2 - state. Complementary data for the levels of isotonic $71\atop{29}$Cu 42 support the presence of a deformed, ΔJ = 1 band built on the proton intruder 7/2 - level at 981 keV. Finally, these data, together with recent studies of lower-mass Co and Cu isotopes and extensive work near 68 Ni , support the view that intruder states based on particle-hole excitations accompany all closed proton shells with Z ≥ 28 .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Thermoelectric performance of Li doped, p-type Mg 2 (Ge,Sn) and comparison with Mg 2 (Si,Sn)

Solid solutions with chemical formula Mg 2 (Si,Ge,Sn) are promising thermoelectric materials with very good properties for the n-type material but significantly worse for the p-type. For power generation applications good n- and p-type materials are required and it has been shown recently that Li doping can enhance the carrier concentration and improve the thermoelectric properties for p-type Mg 2 Si 1-x Sn x . We have investigated the potential of p-type Mg 2 (Ge,Sn) by optimizing Mg 2 Ge 0.4 Sn 0.6 using Li as dopant. We were able to achieve high carrier concentrations (1.4 × 10 20 cm -3 ) and relatively high hole mobilities resulting in high power factors of 1.7 × 10 -3 W m -1 K -2 at 700 K, the highest value reported so far for this class of material. Exchanging Ge by Si allows for a systematic comparison of Mg 2 (Ge,Sn) with Mg 2 (Si,Sn) and shows that Si containing samples exhibit a lower power factor but also a lower thermal conductivity resulting in comparable thermoelectric figure-of-merit. The data is furthermore analyzed in the framework of a single parabolic band model to gain insight on the effect of composition on band structure.

36 MATERIALS SCIENCE↗

Superconductivity in the presence of disorder in skutterudite-related La 3 Co 4 Sn 13 and La 3 Ru 4 Sn 13 compounds: Electrical transport and magnetic studies

La 3 Co 4 Sn 13 and La 3 Ru 4 Sn 13 were categorized as BCS superconductors. In a plot of the critical field H c2 vs T, La 3 Ru 4 Sn 13 displays a second superconducting phase at the higher critical temperature T c *, characteristic of inhomogeneous superconductors, while La 3 Co 4 Sn 13 shows bulk superconductivity below T c . We observe a decrease in critical temperatures with external pressure and magnetic field for both compounds. Additionally, for La 3 Ru 4 Sn 13 we find that T c */dP>dT c /dP. The pressure dependences of T c are interpreted according to the McMillan theory and understood to be a consequence of lattice stiffening. The investigation of the superconducting state of La 3 Co x Ru 4–x Sn 13 shows a T c * that is larger then T c for x < 4. Furthermore, this unique and unexpected observation is discussed as a result of the local disorder and/or the effect of chemical pressure when Ru atoms are partially replaced by smaller Co atoms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural stability of ternary C22–Zr{sub 6}X{sub 2}Co (X=Al, Ga, Sn, As, Sb, Bi, Te) and C22–Zr{sub 6}Sn{sub 2}T′ (T′=Fe, Co, Ni, Cu) compounds

The crystal and electronic structures, and the thermodynamic properties of Zr{sub 6}X{sub 2}Co (X=Al, Ga, Sn, As, Sb, Bi, Te) and Zr{sub 6}Sn{sub 2}T′ (T′=Fe, Co, Ni, Cu) ternary compounds in the Fe{sub 2}P-type structure have been investigated by means of first principle calculations. The calculated structural parameters are in good agreement with the experimental data. The total electronic densities of states as well as the Bader charges of the atoms have been computed. Both electronic and size effects allow to explain the stability of the ternary Zr{sub 6}X{sub 2}Co (X=Al, Ga, Sn, As, Sb, Bi, Te) and Zr{sub 6}Sn{sub 2}T′ (T′=Fe, Co, Ni, Cu) compounds. - Graphical abstract: Valence charge electronic localization function (ELF) calculated for Zr{sub 6}Sb{sub 2}Co compound. Display Omitted - Highlights: • Structural stability of Zr{sub 6}X{sub 2}T′ compounds (X: p element, T′: late transition metal) in the Fe{sub 2}P-type structure. • First principles calculation of lattice parameters and enthalpies of formation. • Electronic densities of state in the series Zr{sub 6}Sn{sub 2}T′ (T′=Fe, Co, Ni, Cu). • Electronic densities of state in the series Zr{sub 6}X{sub 2}Co (X=Al, Ga, Sn, As, Sb, Bi, Te)

36 MATERIALS SCIENCE↗

A quaternary sodium superionic conductor - Na 10.8 Sn 1.9 PS 11.8

Sulfide-based Na-ion conductors are promising candidates as solid-state electrolytes (SSEs) for fabrication of solid-state Na-ion batteries (NIBs) because of their high ionic conductivities and low grain boundary resistance. Currently, most of the sulfide-based Na-ion conductors with high conductivities are focused on Na 3 PS 4 phases and its derivatives. It is desirable to develop Na-ion conductors with new composition and crystal structure to achieve superior ionic conductivities. Here we report a new quaternary Na-ion conductor, Na 10.8 Sn 1.9 PS 11.8 , exhibiting a high ionic conductivity of 0.67mS cm -1 at 25 °C. This high ionic conductivity originates from the presence of a large number of intrinsic Na-vacancies and three-dimensional Na-ion conduction pathways, which has been confirmed by single-crystal X-ray diffraction and first-principles calculations. The Na 10.8 Sn 1.9 PS 11.8 phase is further evaluated as an electrolyte in a Na-Sn alloy/TiS 2 battery, demonstrating its potential application in all-solid-state NIBs.

Yu, Zhaoxin↗

Inorganic Ba-Sn Nanocomposite Materials for Sulfate Sequestration from Complex Aqueous Solutions

Selective sequestration of sulfate (SO42-) in the form of barite (BaSO4) from alkaline solutions of high ionic strength containing carbonate at high concentrations resembling legacy radioactive waste generated during plutonium cold war era production is problematic due to the preferential formation of BaCO3. Incorporation of sulfate into the insoluble and thermally stable BaSO4 phase can potentially benefit radioactive waste processing in reducing operational challenges and suppressing volatilization of other waste components such as technetium-99. To enhance selectivity of SO42- sequestration, a series of Ba(II)-Sn(IV) materials was prepared using simple hydrothermal synthesis from different Sn(II) and Sn(IV) precursors. Structural characterization indicated that all obtained products predominantly contained BaSn(OH)6 and Ba2SnO2(OH)4(H2O)10 crystalline phases which were disrupted upon exposure to SO42- due to formation of BaSO4. Performance of the Ba(II)-Sn(IV) materials was tested using complex alkaline solutions simulating radioactive waste containing 0.094 M SO42- and 0.5 M CO32- among other constituents. About 54 – 66% of SO42- was converted to BaSO4 when a quantity of Ba(II)-Sn(IV) material containing approximately a stoichiometric amount of Ba2+ relative to SO42- was used. In comparison, previous studies indicate negligible BaSO4 formation under similar conditions when a simple Ba2+ salt is used. This improvement is attributed to the selective replacement of the Ba(II) stannate by SO42-. Thermal stability of the sulfate-loaded product material up to 1100 °C was demonstrated. Obtained materials offer a convenient and economical option for the selective sequestration or removal of SO42- from carbonate containing solutions.

Johnson, Isaac↗

Stress-induced Sn Nanowires from Si-Sn Nanocomposite Coatings

The growth of stress-induced tin (Sn) whiskers has been considered responsible for the failure of many electronic devices and many approaches have been developed to mitigate their growth. In this report, however, we describe a simple approach based on the same mechanism to promote the growth of Sn nanowires. The thermal expansion induced stress was utilized as the driving force to initiate the growth of Sn nanowires from Si-Sn phase-separated nanocomposite coatings. The nanostructure of the Si-Sn matrix was the key to controlling the shape and diameter of Sn nanowires. This approach provides additional flexibility for making desirable metallic nanowires with controlled dimensions.

36 MATERIALS SCIENCE↗