Sounding rocket samplings of cosmic dust
Sounding rockets sampling of cosmic dust in upper atmosphere during and after Zeta Perseid and Arietid meteor showers
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Sounding rockets sampling of cosmic dust in upper atmosphere during and after Zeta Perseid and Arietid meteor showers
A sounding rocket attitude control system is reported that uses rate integrated gyros operating in both closed loop and open loop modes at very low drift rates. In normal operation the gyros are zeroed on a nearby star and torqued to the proper location in the closed loop mode; rate output is electronically integrated to provide a position displacement signal. Once closed loop torquing is completed, the caging loop is opened and the gyro is operated as angular displacement sensor to provide limit cycle control while viewing the target.
Fluidic sounding rocket motor ignition has been found to be feasible using a system without stored energy and with the complete absence of electrical energy and wiring. The fluidic ignitor is based on a two component aerodynamic resonance heating device called the pneumatic match. Temperatures in excess of 600 C were generated in closed resonance tubes which were excited by a free air jet from a simple convergent nozzle. Using nitrocellulose interface material, ignition of boron potassium nitrate was accomplished with air supply pressures as low as 45 psi. This paper describes an analytical and experimental program which established a fluidic rocket motor ignition system concept incorporating a pneumatic match with a simple hand pump as the only energy source.
An auroral sounding rocket was launched from Fort Churchill at 0453 UT on April 24, 1968. At the time of the rocket flight, the Vela 3B satellite was passing through the magnetotail plasma sheet at very nearly the same magnetic local time. Electron spectra obtained from experiments on these vehicles are well described by central Maxwell-Boltzmann populations, with indications of a high-energy tail; the satellite spectra also suggest the presence of a low-energy tail. The higher-temperature spectra measured on the rocket may be derived from the satellite spectra by adiabatic compression.
Sounding rocket programs are becoming larger and more complex, thus range safety personnel are required to be central to vehicle and mission design and operations planning. In response to this, the Wallops Flight Facility (VA), is upgrading range facilities, tracking systems, mobile systems and real-time safety systems. These enhancements will improve safety and reliability while augmenting mission success. Flight safety requirements and responsibilities are summarized, and the range safety's future upgrades for wind weighting, real-time analysis and displays, and the mobile safety systems for rocket programs, are considered.
The Micro-X sounding rocket program will fly a 128-element array of transition-edge-sensor microcalorimeters to enable high-resolution X-ray imaging spectroscopy of the Puppis-A supernova remnant. To match the angular resolution of the optics while maximizing the field-of-view and retaining a high energy resolution (< 4 eV at 1 keV), we have designed the pixels using 600 x 600 sq. micron Au/Bi absorbers, which overhang 140 x 140 sq. micron Mo/Au sensors. The data-rate capabilities of the rocket telemetry system require the pulse decay to be approximately 2 ms to allow a significant portion of the data to be telemetered during flight. Here we report experimental results from the flight array, including measurements of energy resolution, uniformity, and absorber thermalization. In addition, we present studies of test devices that have a variety of absorber contact geometries, as well as a variety of membrane-perforation schemes designed to slow the pulse decay time to match the telemetry requirements. Finally, we describe the reduction in pixel-to-pixel crosstalk afforded by an angle-evaporated Cu backside heatsinking layer, which provides Cu coverage on the four sidewalls of the silicon wells beneath each pixel.
Flight vibration data of aerobee 150a sounding rocket
In this paper, Goddard's problem of maximizing the final altitude of a sounding rocket (a singular problem of optimal control) is analyzed using singular perturbation methods. The problem is first cast in singular perturbation form and then solved to zero order by adding boundary-layer corrections to the reduced solution. For a quadratic drag law, a closed-form solution is obtained, although consideration of a numerical example indicates that this solution is not useful for practical sounding rockets. However, use of state variable transformations allows a very accurate numerical approximation to be constructed. It is concluded that application of singular perturbation methods to the well-known sounding rocket problem indicates that these methods may have utility in dealing with singular problems of optimal control.
Programmatic, applicatory, developmental, and operational aspects of sounding rocket utilization for materials processing studies are discussed. Lessons learned through the experience of 10 sounding rocket missions are described. Particular attention is given to missions from the SPAR, Consort, and Joust programs. Successful experiments on Consort include the study of polymer membranes and resins, biological processes, demixing of immiscible liquids, and electrodeposition.
Payload weight and length effect on mass and aerodynamic characteristics of Apache and Cajun sounding rockets
TIROS and Nimbus meteorological satellites, and small and large meteorological sounding rocket experiments
A conceptual design study of the ARIM-1 sounding rocket mission, whose goal is to study atmospheric turbulence in the tropopause region of the atmosphere, is presented. The study was conducted by an interdisciplinary team of students at the University of Alaska Fairbanks who were enrolled in a Space Systems Engineering course. The implementation of the ARIM-1 mission will be carried out by students participating in the Alaska Student Rocket Program (ASRP), with a projected launch date of August 1997. The ARIM-1 vehicle is a single stage sounding rocket with a 3:1 ogive nose cone, a payload diameter of 8 in., a motor diameter of 7.6 in., and an overall height of 17.0 ft including the four fins. Emphasis is placed on standardization of payload support systems. The thermosonde payload will measure the atmospheric turbulence by direct measurement of the temperature difference over a distance of one meter using two 3.45-micron 'hot-wire' probes. The recovery system consists of a 6 ft. diameter ribless guide surface drogue chute and a 33 ft. diameter main cross parachute designed to recover a payload of 31 pounds and slow its descent rate to 5 m/s through an altitude of 15 km. This document discusses the science objectives, mission analysis, payload mechanical configuration and structural design, recovery system, payload electronics, ground station, testing plans, and mission implementation.
The Spread Across Liquids (SAL) experiment characterizes how flames spread over liquid pools in a low-gravity environment in comparison to test data at Earth's gravity and with numerical models. The modeling and experimental data provide a more complete understanding of flame spread, an area of textbook interest, and add to our knowledge about on-orbit and Earthbound fire behavior and fire hazards. The experiment was performed on a sounding rocket to obtain the necessary microgravity period. Such crewless sounding rockets provide a comparatively inexpensive means to fly very complex, and potentially hazardous, experiments and perform reflights at a very low additional cost. SAL was the first sounding-rocket-based, microgravity combustion experiment in the world. It was expected that gravity would affect ignition susceptibility and flame spread through buoyant convection in both the liquid pool and the gas above the pool. Prior to these sounding rocket tests, however, it was not clear whether the fuel would ignite readily and whether a flame would be sustained in microgravity. It also was not clear whether the flame spread rate would be faster or slower than in Earth's gravity.
On September 12th 2018, a sounding rocket flight test was conducted on a mechanically-deployed atmospheric entry system known as the Adaptable Deployable Entry and Placement Technology (ADEPT). The purpose of the Sounding Rocket One (SR-1) test was to gather critical flight data for evaluating the vehicle's in-space deployment performance and supersonic stability. This flight test was a major milestone in a technology development campaign for ADEPT: the application of ADEPT for small secondary payloads. The test was conducted above White Sands Missile Range (WSMR), New Mexico on a SpaceLoft XL rocket manufactured by UP Aerospace. This paper describes the system components, test execution, and test conclusions.
On September 12th 2018, a sounding rocket flight test was conducted on a mechanically-deployed atmospheric entry system known as the Adaptable Deployable Entry and Placement Technology (ADEPT). The purpose of the Sounding Rocket One (SR-1) test was to gather critical flight data for evaluating the vehicle's in-space deployment performance and supersonic stability. This flight test was a major milestone in a technology development campaign for Nano-ADEPT: the application of ADEPT for small secondary payloads. The test was conducted above White Sands Missile Range, New Mexico on a SpaceLoft XL rocket manufactured by UP Aerospace. This paper describes the system components, hardware development campaign, test execution, and test conclusions.
On September 12th, 2018, a sounding rocket flight test was conducted on a mechanically-deployed atmospheric entry system known as the Adaptable Deployable Entry and Placement Technology (ADEPT). The purpose of the Sounding Rocket One (SR-1) test was to gather critical flight data for evaluating the vehicle's in-space deployment performance and supersonic stability. This flight test was a major milestone in a technology development campaign for Nano-ADEPT: the application of ADEPT for small secondary payloads. The test was conducted above White Sands Missile Range, New Mexico on a SpaceLoft XL rocket manufactured by UP Aerospace. This paper describes the system components, hardware development campaign, test execution, and test conclusions.
An inverse differential GPS system has been developed for Sounding Rocket use which includes the flight unit and a ground station capable of extracting GPS data from sounding rocket telemetry, performing a real time differential solution and graphically displaying the rocket's path relative to a predicted trajectory plot. Accuracy has been proven to within less than 10 meters. Postprocessing has increased the precision to within 10 - 20 centimeters. The system has been successfully flown several times and delivered to the Sounding Program Office for routine field use. In addition to providing position, velocity and time GPS data has been used on sounding rockets for vehicle performance analysis, effecting a one hundred fold improvement in data time tagging, and steering an optical tracking device to intercept payloads launched from over the horizon. Precise velocity separation information and timing has been provided to multiple payload systems. Future plans include its use for Range Safety and enabling of interferometric techniques. The technology and software developed also has potential application to small satellite navigation and formation flying.
Photography of earth surface from sounding rockets and satellites