Search NASA⌕ Search

SEARCH · Search NASA

Results for “Spring”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Evaluation of a stall-flutter spring-damper pushrod in the rotating control system of a CH-54B helicopter

Results of a design and flight test program conducted to define the effect of rotating pushrod damping on stall-flutter induced control loads are presented. The CH-54B helicopter was chosen as the test aircraft because it exhibited stall induced control loads. Damping was introduced into the CH-54B control system by replacing the standard pushrod with spring-damper assemblies. Design features of the spring-damper are described and the results of a dynamic analysis are shown which define the pushrod stiffness and damping requirements. Flight test measurements taken at 47,000 lb gross weight with and without the damper are presented. The results indicate that the spring-damper pushrods reduced high frequency, stall-induced rotating control loads by almost 50%. Fixed system control loads were reduced by 40%. Handling qualities in stall were unchanged, as expected.

Nettles, W. E.↗
NASA NTRS1976

Soil moisture ground truth: Steamboat Springs, Colorado, site and Walden, Colorado, site

Ground-truth data taken at Steamboat Springs and Walden, Colorado in support of the NASA missions in these areas during the period March 8, 1976 through March 11, 1976 was presented. This includes the following information: snow course data for Steamboat Springs and Walden, snow pit and snow quality data for Steamboat Springs, and soil moisture report.

Jones, E. B.↗
NASA NTRS1977

Influences of joystick spring resistance on the execution of simple and complex positioning movements

To provide good proprioceptive feedback in a manual control device for a designation task, spring resistance of a joystick was optimized by adjustment of centering force and deflection nonlinearly with each other by using the psychophysical method of cross modality matching. Designation with zero and first order systems showed that the coarse adjustment was insensitive to stick and certain task parameters, although it was influenced by some biomechanical parameters and the anticipated demands of the final control positioning. Only the more difficult fine adjustment is sensitive to parameter alterations and therefore suitable for optimization attempts. The strong centering of the stick by a nonlinear degressive spring resistance facilitates fine adjustment. Through this, total adjustment time with the first order system is reduced by more than thirty percent, compared to a linear resistance. Tracking experiments affirm the usefulness and preference of nonlinear spring resistance.

Rothbauer, G.↗
NASA NTRS1981

Evaluation of spring wheat and barley crop calender models for the 1979 crop year

During the Large Area Crop Inventory Experiment, spring wheat planting date and crop development stage estimates based on historical normals were improved by the use of the Feyerherm planting date and Robertson spring wheat crop calendar models. The Supporting Research Crop Calendar Project element modified the Robertson model to reduce bias at cardinal growth stages within the growing season. These models were tested in 1980 along with a state-of-the-art barley model (Williams) against a ground-truth data set from 49 calendar year 1979 segments in the U.S. Great Plains spring wheat and barley region.

Nazare, C. V.↗
NASA NTRS1981

Evaluation of the Doraiswamy-Thompson winter wheat crop calendar model incorporating a modified spring restart sequence

The Robertson phenology was used to provide growth stage information to a wheat stress indicator mode. A stress indicator model demands two acurate predictions from a crop calendar: date of spring growth initiation; and crop calendar stage at growth initiation. Several approaches for restarting the Robertson phenology model at spring growth initiation were studied. Although best results were obtained with a solar thermal unit method, an alternate approach which indicates soil temperature as the controlling parameter for spring growth initiation was selected and tested. The modified model (Doraiswamy-Thompson) is compared to LACIE-Robertson model predictions.

Taylor, T. W.↗
NASA NTRS1981

Predicting the timing and potential of the spring emergence of overwintered populations of Heliothis spp

The current state of knowledge dealing with the prediction of the overwintering population and spring emergence of Heliothis spp., a serious pest of numerous crops is surveyed. Current literature is reviewed in detail. Temperature and day length are the primary factors which program H. spp. larva for possible diapause. Although studies on the interaction of temperature and day length are reported, the complete diapause induction process is not identified sufficiently to allow accurate prediction of diapause timing. Mortality during diapause is reported as highly variable. The factors causing mortality are identified, but only a few are quantified. The spring emergence of overwintering H. spp. adults and mathematical models which predict the timing of emergence are reviewed. Timing predictions compare favorably to observed field data; however, prediction of actual numbers of emerging moths is not possible. The potential for use of spring emergence predictions in pest management applications, as an early warning of potential crop damage, are excellent. Research requirements to develop such an early warning system are discussed.

Hartstack, A. W.↗
NASA NTRS1984

Segmented Tubular Seat Springs

Low-cost seat cushion made with rows of hoop springs. Springs formed from elliptical tubes by cutting most of way through on planes perpendicular to cylindrical axis. Tubular spring simplifies construction and reduce cost of seat cushions in vehicles and furniture.

Haslim, L. A.↗
NASA NTRS1983

Rain-induced spring wheat harvest losses

When rain or a combination of rain and high humidity delay wheat harvest, losses can occur in grain yield and/or grain quality. Yield losses can result from shattering, from reduction in test weight, and in the case of windrowed grain, from rooting of sprouting grain at the soil: windrow contact. Losses in grain quality can result from reduction in test weight and from sprouting. Sprouting causes a degradation of grain proteins and starches, hence flour quality is reduced, and the grain price deteriorates to the value of feed grain. Although losses in grain yield and quality are rain-induced, these losses do not necessarily occur because a standing or windrowed crop is wetted by rain. Spike water concentration in hard red spring wheat must be increased to about 45-49% before sprouting is initiated in grain that has overcome dormancy. The time required to overcome this dormancy after the cultivar has dried to 12 to 14% water concentration differs with hard red spring cultivars. The effect of rain on threshing-ready standing and windrowed hard red spring wheat grain yeild and quality was evaluated. A goal was to develop the capability to forecast the extent of expected loss of grain yield and quality from specific climatic events that delay threshing.

Bauer, A.↗
NASA NTRS1986

Transition of surface energy budget in the Gobi Desert between spring and summer seasons

The surface energetics of the southwest Gobi Desert, including the temporal variations and diurnally averaged properties of the surface energy budget components, was investigated. The field program was conducted during the spring and summer of 1984, with the measurement system designed to monitor radiative exchange, heat/moisture storage in the soil, and sensible and latent heat exhange between the ground and the atmosphere. Results of the analysis reveal a seasonal transition feature not expected of a midlatitude desert. Namely, the differences in both surface radiation exchange and the distibution of sensible and latent heat transfer arise within a radiatively forced environment that barely deviates from spring to summer in terms of available solar energy at the surface. Both similarities and differences in the spring and summer surface energy budgets arise from differences imparted to the system by an increase in the summertime atmospheric moisture content. Changes in the near-surface mixing ratio are shown to alter the effectiveness of the desert surface in absorbing radiative energy and redistibuting it to the lower atmosphere through sensible and latent heat exchange.

Smith, Eric A.↗
NASA NTRS1989

Structurally-Tailorable, Nonlinear, Snap-Through Spring

Abrupt change in load/deflection response controllable and predictable. Structurally-tailorable, nonlinear, snap-through spring (STNSTS) exhibits controllable and predictable abrupt change in load/deflection response and based upon known phenomenon of snap-through structural response. Composed of pin-connected two-bar linkage which depicts combined tension/compression springs. As load applied to STNSTS, stiffness is function of internal spring and bending stiffness of pin-connected bars. As load increases, bars deform laterally until they collapse and snap through. Has application in passively-tailored rotor-blade flap, pitch, and lag response, to improve aerodynamic performance and stability characteristics of rotors; in aerodynamically- and aeroelastically-tailored wing spars and ribs, to produce tailored deformation state for improved effectiveness in maneuvering, aerodynamic performance, and stability characteristics; and in energy absorbers for automobile bumpers and aircraft land

Starnes, James H., Jr.↗
NASA NTRS1988

Atmospheric conditions during the spring and fall transitions in the coastal ocean off western United States

Atmospheric events which force the spring and fall oceanic transitions in the coastal ocean off the west coast of North America were examined by analyzing the records of adjusted sea level (ASL), coastal wind stress, sea level atmospheric pressure (SLP), and 500-mbar heights for the years 1971-1975 and 1980-1983. The records cover periods of 91 days, centered on the dates of the spring and fall transitions as determined from coastal ASL data. It was found that the dominant mode of the ASL and coastal wind stress are similar around the times of both the spring and fall transitions, and that the time series for these modes are highly correlated with one another. Principal estimator patterns show the spatial patterns of SLP which force the ASL and coastal wind stress during the transitions.

Strub, P. Ted↗
NASA NTRS1991

A study of the response of nonlinear springs

The various phases to developing a methodology for studying the response of a spring-reinforced arch subjected to a point load are discussed. The arch is simply supported at its ends with both the spring and the point load assumed to be at midspan. The spring is present to off-set the typical snap through behavior normally associated with arches, and to provide a structure that responds with constant resistance over a finite displacement. The various phases discussed consist of the following: (1) development of the closed-form solution for the shallow arch case; (2) development of a finite difference analysis to study (shallow) arches; and (3) development of a finite element analysis for studying more general shallow and nonshallow arches. The two numerical analyses rely on a continuation scheme to move the solution past limit points, and to move onto bifurcated paths, both characteristics being common to the arch problem. An eigenvalue method is used for a continuation scheme. The finite difference analysis is based on a mixed formulation (force and displacement variables) of the governing equations. The governing equations for the mixed formulation are in first order form, making the finite difference implementation convenient. However, the mixed formulation is not well-suited for the eigenvalue continuation scheme. This provided the motivation for the displacement based finite element analysis. Both the finite difference and the finite element analyses are compared with the closed form shallow arch solution. Agreement is excellent, except for the potential problems with the finite difference analysis and the continuation scheme. Agreement between the finite element analysis and another investigator's numerical analysis for deep arches is also good.

Hyer, M. W.↗
NASA NTRS1992

Spring polar ozone behavior

Understanding of the springtime behavior of polar stratospheric ozone as of mid 1990 is summarized. Heterogeneous reactions on polar stratospheric clouds as hypothesis for ozone loss are considered and a simplified description of the behavior of Antarctic ozone in winter and spring is given. Evidence that the situation is more complicated than described by the theory is produced. Many unresolved scientific issues remain and some of the most important problems are identified. Ozone changes each spring since 1979 have clearly established for the first time that man made chlorine compounds influence stratospheric ozone. Long before important advances in satellite and in situ investigations, it was Dobson's decision to place a total ozone measuring spectrometer at Halley Bay in Antarctica during the International Geophysical Year and subsequent continuous monitoring which led to the discovery that ozone was being destroyed each spring by chlorine processed by polar stratospheric clouds.

Aikin, Arthur C.↗
NASA NTRS1993

Spring-Tab Lock Washer

Improved spring-tab lock washer offers alternative to such positive-locking devices as cotter pins and lock wires and to conventional split-ring lock washers. Does not dig into fastened parts with sharp edges; less likely to inflict scratches causing cracks. Contains three winglike spring tabs and three alignment pips, pressed into mating dimples in surface of part to be fastened. Spring tabs on lock washer allow only clockwise rotation (tightening) of bolt or nut.

Finckenor, Jeff↗
NASA NTRS1992

Synthesis of actively adjustable springs by antagonistic redundant actuation

A methodology for active spring generation is presented based on antagonistic redundant actuation. Antagonistic properties are characterized using an effective system stiffness. 'Antagonistic stiffness' is generated by preloading a closed-chain (parallel) linkage system. Internal load distribution is investigated along with the necessary conditions for spring synthesis. The performance and stability of a proposed active spring are shown by simulation, and applications are discussed.

Yi, Byung-Ju↗
NASA NTRS1992

Radii effect on the translation spring constant of force transducer beams

Multi-component strain-gage force transducer design requires the designer to determine the spring constant of the numerous beams or flexures incorporated in the transducer. The classical beam deflection formulae that are used in calculating these spring constants typically assume that the beam has a uniform moment of inertia along the entire beam length. In practice all beams have a radius at the end where the beam interfaces with the shoulder of the transducer, and on short beams in particular this increases the beam spring constant considerably. A Basic computer program utilizing numerical integration is presented to determine this effect.

Scott, C. E.↗
NASA NTRS1944

Application of spring tabs to elevator controls

Equations are presented for calculating the stick-force characteristics obtained with a spring-tab type of elevator control. The main problems encountered in the design of a satisfactory elevator spring tab are to provide stick forces in the desired range, to maintain the force per g sufficiently constant throughout the speed range, to avoid undesirable "feel" of the control in ground handling or in flight at low airspeeds, and to prevent flutter. Examples are presented to show the design features of spring tabs required to solve these problems for airplanes of various sizes.

Phillips, William H↗
NASA NTRS1952

Flight investigation of the effect of control centering springs on the apparent spiral stability of a personal-owner airplane

Report presents the results of a flight investigation conducted on a typical high-wing personal-owner airplane to determine the effect of control centering springs on apparent spiral stability. Apparent spiral stability is the term used to describe the spiraling tendencies of an airplane in uncontrolled flight as affected both by the true spiral stability of the perfectly trimmed airplane and by out-of-trim control settings. Centering springs were used in both the aileron and rudder control systems to provide both a positive centering action and a means of trimming the airplane. The springs were preloaded so that when they were moved through neutral they produced a nonlinear force gradient sufficient to overcome the friction in the control surface at the proper setting for trim. The ailerons and rudder control surfaces did not have trim tabs that could be adjusted in flight.

Campbell, John P↗