Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural engineering.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Enhancing fatigue life by ductile-transformable multicomponent B2 precipitates in a high-entropy alloy

Catastrophic accidents caused by fatigue failures often occur in engineering structures. Thus, a fundamental understanding of cyclic-deformation and fatigue-failure mechanisms is critical for the development of fatigue-resistant structural materials. Here we report a high-entropy alloy with enhanced fatigue life by ductile-transformable multicomponent B2 precipitates. Its cyclic-deformation mechanisms are revealed by real-time in-situ neutron diffraction, transmission-electron microscopy, crystal-plasticity modeling, and Monte-Carlo simulations. Multiple cyclic-deformation mechanisms, including dislocation slips, precipitation strengthening, deformation twinning, and reversible martensitic phase transformation, are observed in the studied high-entropy alloy. Its improved fatigue performance at low strain amplitudes, i.e., the high fatigue-crack-initiation resistance, is attributed to the high elasticity, plastic deformability, and martensitic transformation of the B2-strengthening phase. This study shows that fatigue-resistant alloys can be developed by incorporating strengthening ductile-transformable multicomponent intermetallic phases.

36 MATERIALS SCIENCE↗

Cryo-EM structures of engineered active bc 1- cbb 3 type CIII 2 CIV super-complexes and electronic communication between the complexes

Respiratory electron transport complexes are organized as individual entities or combined as large supercomplexes (SC). Gram-negative bacteria deploy a mitochondrial-like cytochrome (cyt) bc 1 (Complex III, CIII 2 ), and may have specific cbb 3 -type cyt c oxidases (Complex IV, CIV) instead of the canonical aa 3 -type CIV. Electron transfer between these complexes is mediated by soluble ( c 2 ) and membrane-anchored ( c y ) cyts. Here, we report the structure of an engineered bc 1 - cbb 3 type SC (CIII 2 CIV, 5.2Å resolution) and three conformers of native CIII 2 (3.3 Å resolution). The SC is active in vivo and in vitro, contains all catalytic subunits and cofactors, and two extra transmembrane helices attributed to cyt c y and the assembly factor CcoH. The cyt c y is integral to SC, its cyt domain is mobile and it conveys electrons to CIV differently than cyt c 2 . The successful production of a native-like functional SC and determination of its structure illustrate the characteristics of membrane-confined and membrane-external respiratory electron transport pathways in Gram-negative bacteria.

42 ENGINEERING↗

Combined vertically correlated InAs and GaAsSb quantum dots separated by triangular GaAsSb barrier

The aim of this work is to offer new possibilities for quantum dot (QD) band structure engineering, which can be used for the design of QD structures for optoelectronic and single photon applications. Two types of QDs, InAs and GaAsSb, are combined in self assembled vertically correlated QD structures. The first QD layer is formed by InAs QDs and the second by vertically correlated GaAsSb QDs. Combined QD layers are separated by a triangular GaAsSb barrier. The structure can be prepared as type-I, with both electrons and holes confined in InAs QDs, exhibiting a strong photoluminescence, or type-II, with electrons confined in InAs QDs and holes in GaAsSb QDs. The presence of the thin triangular GaAsSb barrier enables the realization of different quantum level alignment between correlated InAs and GaAsSb QDs, which can be adjusted by structure parameters as type-I or type-II like for ground and excited states separately. The position of holes in this type of structure is influenced by the presence of the triangular barrier or by the size and composition of the GaAsSb QDs. The electron-hole wavefunction overlap and the photoluminescence intensity alike can also be controlled by structure engineering.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Real-time POD-CFD Wind-Load Calculator for PV Systems

The primary objective of this project is to create an accurate web-based real-time wind-load calculator. This is of paramount importance for (1) the rapid and accurate assessments of the uplift and downforce loads on a PV mounting system, (2) identifying viable solutions from available mounting systems, and therefore helping reduce the cost of mounting hardware and installation. Wind loading calculations for structures are currently performed according to the American Society of Civil Engineers/ Structural Engineering Institute Standard ASCE/SEI 7; the values in this standard were calculated from simplified models that do not necessarily take into account relevant characteristics such as those from full 3D effects, end effects, turbulence generation and dissipation, as well as minor effects derived from shear forces on installation brackets and other accessories. This standard does not include provisions that address the special requirements of rooftop PV systems, and attempts to apply this standard may lead to significant design errors as wind loads are incorrectly estimated. Therefore, an accurate calculator would be of paramount importance for the preliminary assessments of the uplift and downforce loads on a PV mounting system, identifying viable solutions from available mounting systems, and therefore helping reduce the cost of the mounting system and installation. The challenge is that although a full-fledged three-dimensional computational fluid dynamics (CFD) analysis would properly and accurately capture the complete physical effects of air flow over PV systems, it would be impractical for this tool, which is intended to be a real-time web-based calculator. CFD routinely requires enormous computation times to arrive at solutions that can be deemed accurate and grid-independent even in powerful and massively parallel computer platforms.

14 SOLAR ENERGY↗

Three Dimensional Response Spectrum Soil Structure Modeling Versus Conceptual Understanding To Illustrate Seismic Response Of Structures

Present methods of analysis and mathematical modeling contain so many assumptions that separate them from reality and thus represent a defect in design which makes it difficult to analyze reasons of failure. Three dimensional (3D) modeling is so superior to 1D or 2D modeling, static analysis deviates from the true nature of earthquake load which is 'a dynamic punch', and conflicting assumptions exist between structural engineers (who assume flexible structures on rigid block foundations) and geotechnical engineers (who assume flexible foundations supporting rigid structures). Thus a 3D dynamic soil-structure interaction is a step that removes many of the assumptions and thus clears reality to a greater extent. However such a model cannot be analytically analyzed. We need to anatomize and analogize it. The paper will represent a conceptual (analogical) 1D model for soil structure interaction and clarifies it by comparing its outcome with 3D dynamic soil-structure finite element analysis of two structures. The aim is to focus on how to calculate the period of the structure and to investigate effect of variation of stiffness on soil-structure interaction.

58 GEOSCIENCES↗

Engineering Electronic Band Structure of Indium-doped Cd 1-x Mg x O Alloys for Solar Power Conversion Applications

CdO-based transparent conducting oxide thin films have great potential applications in many optoelectronic devices because of their high mobility, low resistivity, and high transparency over a wide spectral range. However, because of the low band gap of only 2.2 eV, the transparency of this material is limited in the UV spectral range. Alloying of undoped CdO with a larger band gap material such as MgO increases the band gap but tends to degrade electrical conductivity. Recently, it has been demonstrated that In doping of CdO greatly improves the electrical characteristic of this material by increasing both the carrier density and the mobility. In this work, we present a comprehensive study on CdMgO alloys doped with up to 4 % In. Here, we show that the doping with In extends the composition range of conducting films with a composition of up to 40% of Mg and a band gap of 3.5 eV. Our results could open up a new pathway to transparent conducive oxides that could be used as low-resistivity contacts and UV-transparent electrn emitter windows in thin-film photovoltaic technologies.

14 SOLAR ENERGY↗

Computational Hydrocode Study of Target Damage due to Fragment-Blast Impact

A target's terminal ballistic effects involving explosively generated fragments, along with the original blast, are of critical importance for many different security and safety related applications. Personnel safety and protective building design are but a few of the practical disciplines that can gain from improved understanding combined loading effects. Traditionally, any engineering level analysis or design effort involving explosions would divide the target damage analysis into two correspondingly critical areas: blast wave and fragment related impact effects. The hypothesis of this paper lies in the supposition that a linear combination of a blast-fragment loading, coupled with an accurate target response description, can lead to a non-linear target damage effect. This non-linear target response could then stand as the basis of defining what a synergistic or combined frag-blast loading might actually look like. The table below, taken from Walters, et. al. categorizes some of the critical parameters driving any combined target damage effect and drives the evaluation of results. Based on table 1 it becomes clear that any combined frag-blast analysis would need to account for the target response matching similar ranges for the mechanics described above. Of interest are the critical times upon which a blast event or fragment impact loading occurs relative to the target's modal response. A blast, for the purposes of this paper is defined as the sudden release of chemical energy from a given material (henceforth referred to as an energetic material) onto its surrounding medium. During the coupling mechanism a discrete or discontinuous shockwave is generated. This shockwave travels outward from the source transferring energy and momentum to any surrounding objects including personnel and engineering structures. From an engineering perspective blast effects are typically characterized by way of physical characteristics such as Peak Pressure (PP), Time of Arrival (TOA), Pressure-Impulse (PI) and Time of Duration (TD). Other peculiarities include the radial decrease in pressure from the source, any fireball size measurement, and subsequent increase in temperature from the passing of the shockwave through the surrounding medium. In light of all of these metrics, the loading any object receives from a blast event becomes intricately connected to the distance between itself and the source. Because of this, a clear distinction is made between close-in effects and those from a source far away from the object of interest. Explosively generated fragments on the other hand are characterized by means of their localized damage potential. Metrics such as whether the fragment penetrates or perforates a given object is quantified as well as other variables including fragment's residual velocity, % kinetic energy decrease, residual fragment mass and other exit criteria. A fragment launched under such violent conditions could easily be traveling at speeds in excess of 2500 ft/s. Given these speeds it is conceivable to imagine how any given fragment could deliver a concentrated load to a target and penetrates through walls, vehicles or even the protection systems of nearby personnel. This study will focus on the individual fragment-target impact event with the hopes of expanding it to eventually include statistical procedures. Since this is a modeling excursion into the combined frag-blast target damage effects the numerical methods used to frame this problem become important in-so-far as the simulations are done in a consistent manner. For this study a Finite-Element based Hydrocode solution called ALE3D (ALE=Arbitrary Lagrangian-Eulerian) was utilized. ALE3D is developed by Lawrence Livermore National Laboratory (Livermore, CA), and as this paper will show, successfully implemented a converged ALE formulation including as many of the different aspects needed to query the synergistic damage on a given target. Further information on the modeling setup is included.

42 ENGINEERING↗

Nondestructive Evaluation of Alkali-Silica Reaction in High-Strength Concrete for Aging Structures Sustainability

Concrete is a multiphase geo-material, which is utilized extensively in passive supporting and shielding structures at nuclear facilities. Chemo-mechanical degradation of concrete in old structures is a challenge to sustainability of aging commercial light water reactors. Alkali-silica reaction (ASR) is a common slowly evolving chemo-mechanical damage mechanism of concrete, which could take tens of years to reach the threshold stage when visible cracks appear in a concrete structure. In ASR, concrete constituents react with each other, namely the alkalis in the pore solution of hydrated cement paste (mostly K{sup +}OH{sup -} and Na{sup +}OH{sup -}) react with non-crystalline silica (SiO{sub 2}) of the aggregates to form highly hydrophilic gel. At sufficient levels of ambient relative humidity (typically above 85%), imbibition of water causes expansion of the ASR gel, which results in cracking of constrained reinforced concrete and ultimate structural weakening below safety margin levels. Stability and functional performance of concrete structures potentially suffering from chemo-mechanical deterioration due to ASR is evaluated in a multi-stage process involving material evaluation and structural engineering analysis. Existing methods used by industry for concrete material evaluation are based on extrusion of cores from multiple locations in a structure, and destructive laboratory tests on cores. Because each destructive test requires separate core extrusion, the total number of cores taken from the structure at once could be numbering in hundreds. Laboratory tests include petrography (high resolution optical microscopy of core sections) to develop damage rating index (DRI) score of concrete cores. Another test may involve chemical pore solution extraction from cores, and solution speciation analysis using inductively coupled plasma and mass spectroscopy (ICP/MS). Other tests may consist of mechanical evaluation of cores strength and fracture toughness. The DRI score of concrete material as well as other information obtained from the laboratory tests is subsequently used in structural engineering calculations, where stresses in the entire structure are modeled to evaluate its safety and mechanical stability. Extrusion of a large number of cores is highly undesirable for evaluation of nuclear facility concrete structures. The amount of destructive material testing could be minimized by developing methods for in-situ NDE of ASR to quantify the amount of deterioration that is occurring in the structure, and to identify areas in the structure where more deterioration may be occurring.

36 MATERIALS SCIENCE↗

LANL Test Engineering’s Structural Dynamics Research and Development Efforts [Slides]

LANL's priority roles are serving as a nuclear weapons design agency and a nuclear weapons production agency; addressing nuclear threats; and performing national security science, technology, and engineering. LANL’s Test Engineering organization serves the national mission of maintaining a strategic nuclear deterrent by providing high-quality, empirical evidence through the execution and assessment of weapons system and component testing. Shock and vibration environmental testing provides one key piece of evidence for evaluation and qualification of these systems and components in the service environments incurred during a lifetime in the stockpile. LANL’s Test Engineering group continuously pursues research and development in structural dynamics to improve shock and vibration testing capabilities, processes, and analysis techniques to increase the fidelity of service environment recreations in laboratory testing settings. This talk will highlight several ongoing projects to represent these R&D efforts.

42 ENGINEERING↗

Structure-Guided Engineering of a Scoulerine 9-O-Methyltransferase Enables the Biosynthesis of Tetrahydropalmatrubine and Tetrahydropalmatine in Yeast

Benzylisoquinoline alkaloids (BIAs) are an important class of plant natural products with diverse pharmacological properties. Microbial platforms can produce BIAs through heterologous biosynthesis more efficiently than native plant hosts and allow for the generation of currently inaccessible BIA biosynthetic intermediates and unnatural derivatives. However, much remains unknown regarding the structures, substrate scopes, and mechanisms of many of the enzymes involved in BIA biosynthesis, which hampers efforts toward engineering these enzymes to produce alternative products or act in non-native biosynthetic contexts. In this paper, we present multiple crystal structures of two scoulerine 9- O -methyltransferase (S9OMT) variants from Thalictrum flavum which catalyze an essential step in the biosynthesis of berberine. The crystal structures revealed the structural basis for substrate and cofactor recognition by Tf S9OMT and provide further insight into the structure and function of S9OMTs. A structural comparison of the Tf S9OMT and T. flavum norcoclaurine 6OMT ( Tf 6OMT) crystal structures identified important residues for enzyme regiospecificity, which were confirmed via mutagenesis and in vitro assays. Several Tf S9OMT mutants with expanded substrate scopes toward various 1-benzylisoquinoline substrates were generated. The rationally engineered Tf S9OMT mutants with altered regiospecificity were tested in a yeast-based scoulerine production platform and enabled de novo production of tetrahydropalmatrubine and tetrahydropalmatine.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stochastic level-set method for shape optimisation

We present a new method for stochastic shape optimisation of engineering structures. The method generalises an existing deterministic scheme, in which the structure is represented and evolved by a level-set method coupled with mathematical programming. The stochastic element of the algorithm is built on the methods of statistical mechanics and is designed so that the system explores a Boltzmann–Gibbs distribution of structures. In non-convex optimisation problems, the deterministic algorithm can get trapped in local optima: the stochastic generalisation enables sampling of multiple local optima, which aids the search for the globally-optimal structure. The method is demonstrated for several simple geometrical problems, and a proof-of-principle calculation is shown for a simple engineering structure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Crystal Structure of the Ergothioneine Sulfoxide Synthase from Candidatus Chloracidobacterium thermophilum and Structure-Guided Engineering To Modulate Its Substrate Selectivity

Ergothioneine is a thiohistidine derivative with potential benefits on many aging-related diseases. The central step of aerobic ergothioneine biosynthesis is the oxidative C–S bond formation reaction catalyzed by mononuclear nonheme iron sulfoxide synthases (EgtB and Egt1). Thus far, only the Mycobacterium thermoresistibile EgtB (EgtB Mth ) crystal structure is available, while the structural information for the more industrially attractive Egt1 enzyme is not. In this paper, we reported the crystal structure of the ergothioneine sulfoxide synthase (EgtB Cth ) from Candidatus Chloracidobacterium thermophilum . EgtB Cth has both EgtB- and Egt1-type of activities. Guided by the structural information, we conducted Rosetta Enzyme Design calculations, and we biochemically demonstrated that EgtB Cth can be engineered more toward Egt1-type of activity. This study provides information regarding the factors governing the substrate selectivity in Egt1- and EgtB-catalysis and lays the groundwork for future sulfoxide synthase engineering toward the development of an effective ergothioneine process through a synthetic biology approach.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and Engineering of l-Arabinitol 4-Dehydrogenase from Neurospora crassa

L-Arabinitol 4-dehydrogenase (LAD) catalyzes the conversion of L-arabinitol into L-xylulose with concomitant NAD{sup +} reduction. It is an essential enzyme in the development of recombinant organisms that convert L-arabinose into fuels and chemicals using the fungal L-arabinose catabolic pathway. Here we report the crystal structure of LAD from the filamentous fungus Neurospora crassa at 2.6 {angstrom} resolution. In addition, we created a number of site-directed variants of N. crassa LAD that are capable of utilizing NADP{sup +} as cofactor, yielding the first example of LAD with an almost completely switched cofactor specificity. This work represents the first structural data on any LAD and provides a molecular basis for understanding the existing literature on the substrate specificity and cofactor specificity of this enzyme. The engineered LAD mutants with altered cofactor specificity should be useful for applications in industrial biotechnology.

36 MATERIALS SCIENCE↗

Lignin structure and its engineering

Research on lignin structure and its engineering are inextricably and bidirectionally linked. Perturbations of genes on the lignin biosynthetic pathway may end in striking compositional and structural changes that in turn indicate novel methods for altering lignin and even ‘designing’ the polymer to enhance its value or with a view toward its simpler removal from the cell wall polysaccharides. Basic structural studies on various native lignins increasingly refine our knowledge of lignin structure, and examining lignins in different species reveals the extent to which evolution and natural variation have resulted in the incorporation of ‘non-traditional’ phenolic monomers, including phenolics from beyond the monolignol biosynthetic pathway. As a result, the very definition of lignin continues to be expanded and refined.

59 BASIC BIOLOGICAL SCIENCES↗

Structure-based Engineering of Species Selectivity in the Interaction Between Urokinase and its Receptor: Implication for Preclinical Cancer Therapy

The high affinity interaction between the urokinase-type plasminogen activator (uPA) and its glycolipid-anchored receptor (uPAR) is decisive for cell surface-associated plasminogen activation. Because plasmin activity controls fibrinolysis in a variety of pathological conditions, including cancer and wound healing, several intervention studies have focused on targeting the uPA {center_dot} uPAR interaction in vivo. Evaluations of such studies in xenotransplanted tumor models are, however, complicated by the pronounced species selectivity in this interaction. We now report the molecular basis underlying this difference by solving the crystal structure for the murine uPA {center_dot} uPAR complex and demonstrate by extensive surface plasmon resonance studies that the kinetic rate constants for this interaction can be swapped completely between these orthologs by exchanging only two residues. This study not only discloses the structural basis required for a successful rational design of the species selectivity in the uPA {center_dot} uPAR interaction, which is highly relevant for functional studies in mouse models, but it also suggests the possible development of general inhibitors that will target the uPA {center_dot} uPAR interaction across species barriers.

59 BASIC BIOLOGICAL SCIENCES↗

Structure-Based Engineering of Irreversible Inhibitors against Histone Lysine Demethylase KDM5A

The active sites of hundreds of human α-ketoglutarate (αKG) and Fe(II)-dependent dioxygenases are exceedingly well preserved, which challenges the design of selective inhibitors. In this work we identified a noncatalytic cysteine (Cys481 in KDM5A) near the active sites of KDM5 histone H3 lysine 4 demethylases, which is absent in other histone demethylase families, that could be explored for interaction with the cysteine-reactive electrophile acrylamide. We synthesized analogs of a thienopyridine-based inhibitor chemotype, namely, 2-((3-aminophenyl)(2-(piperidin-1-yl)ethoxy)methyl)thieno[3,2-b]- pyridine-7-carboxylic acid (N70) and a derivative containing a (dimethylamino)but-2-enamido)phenyl moiety (N71) designed to form a covalent interaction with Cys481. We characterized the inhibitory and binding activities against KDM5A and determined the cocrystal structures of the catalytic domain of KDM5A in complex with N70 and N71. Whereas the noncovalent inhibitor N70 displayed αKG-competitive inhibition that could be reversed after dialysis, inhibition by N71 was dependent on enzyme concentration and persisted even after dialysis, consistent with covalent modification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗