Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural properties of condensed matter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Atom-in-jellium predictions of the shear modulus at high pressure

Atom-in-jellium calculations of the Einstein frequency in condensed matter and of the equation of state were used to predict the variation of shear modulus from zero pressure to ~10 7 g/cm 3 , for several elements relevant to white dwarf stars and other self-gravitating systems. This is by far the widest range reported electronic structure calculation of shear modulus, spanning from ambient through the one-component plasma to extreme relativistic conditions. The predictions were based on a relationship between the Debye temperature and shear modulus, which we assess to be accurate at the o(10%) level, and is the first known use of atom-in-jellium theory to calculate a shear modulus. Finally, we assessed the overall accuracy of the method by comparing with experimental measurements and more detailed electronic structure calculations at lower pressures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Tuning the flat bands of the kagome metal CoSn with Fe, In, or Ni doping

We report CoSn is a Pauli paramagnet with relatively flat d bands centered about 100 meV below the Fermi energy, E F . Single crystals of CoSn lightly doped with Fe, In, or Ni are investigated using x-ray and neutron scattering, magnetic susceptibility and magnetization, AC susceptibility, specific heat, and resistivity measurements. Within the rigid-band approximation, hole doping with a few percent of Fe or In should move the flat bands closer to E F , whereas electron doping with Ni should move the flat bands further away from E F . We provide evidence that this indeed occurs. Fe and In doping drive CoSn toward magnetism, while Ni doping suppresses CoSn's already weak magnetic response. The resulting ground state is different for Fe versus In doping. For Fe-doped crystals, Co 1-x Fe x Sn, with 0.02< x <0.27, the magnetic and specific-heat data are consistent with the formation of a spin glass, with a glass temperature, T g , ranging from 1 K for x = 0.02 to 10 K for x = 0.27. Powder and single-crystal neutron diffraction found no evidence of long-range magnetic order below T g for samples with x ≈ 0.17. For In-doped crystals, CoSn 1-y In y , both the magnetic susceptibility and the Sommerfeld coefficient, γ, increase substantially relative to pure CoSn, but with no clear indication of a magnetic transition for 0.05< y <0.2. CoSn crystals doped with Ni (Co 0.93 Ni 0.07 Sn) have a significantly smaller magnetic susceptibility and γ than pure CoSn, consistent with flat bands further from E F .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

High spin polarization in the disordered quaternary Heusler alloy FeMnVGa

Here in this paper, we report the successful synthesis of a Fe-based highly spin-polarized quaternary Heusler alloy FeMnVGa and its structural, magnetic, and transport properties probed through different experimental methods and theoretical techniques. Density functional theory (DFT) calculations performed on different types of structures reveal that the structure with Ga at 4a, V at 4b, Mn at 4c, and Fe at 4d (space group F$\bar{4}$3m) possess minimum energy among all the ordered variants. Ab initio simulations in the most stable ordered structure show that the compound is a ferromagnet having a large spin-polarization (89.9%). Neutron diffraction reveals that the compound crystallizes in disordered type-2 structure (space group Fm$\bar{3}$m) in which Ga occupies at 4a, V 4b and Fe/Mn occupy 4c/4d sites with 50:50 proportions. The structural disorder is further confirmed by x-ray diffraction, extended x-ray absorption fine structure, 57 Fe Mössbauer spectrometry results, and DFT calculations. Magnetization studies suggest that the compound orders ferromagnetically below T C ~ 293 K and the saturation magnetization follows the Slater-Pauling rule. Mössbauer spectrometry, along with neutron diffraction, suggest that Mn is the major contributor to the total magnetism in the compound, consistent with the theoretical calculations, which also indicates that spin polarization remains high (81.3%), even in the presence of such large atomic disorder. The robustness of the half-metallic ferromagnetic (HMF) property in the presence of disorder is a quite unique characteristic over other reported HMF in literature and makes this compound quite promising for spintronics applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Ultrafast lattice disordering can be accelerated by electronic collisional forces

In the prevalent picture of ultrafast structural phase transitions, the atomic motion occurs in a slowly varying potential energy surface determined adiabatically by the fast electrons. However, this ignores non-conservative forces caused by electron-lattice collisions, which can significantly influence atomic motion. Most ultrafast techniques only probe the average structure and are less sensitive to random displacements, and therefore do not detect the role played by non-conservative forces in phase transitions. Here we show that the lattice dynamics of the prototypical insulator-to-metal transition of VO 2 cannot be described by a potential energy alone. We use the sample temperature to control the preexisting lattice disorder before ultrafast photoexcitation across the phase transition and our ultrafast diffuse scattering experiments show that the fluctuations characteristic of the rutile metal develop equally fast (120 fs) at initial temperatures of 100 K and 300 K. This indicates that additional non-conservative forces are responsible for the increased lattice disorder. In conclusion, these results highlight the need for more sophisticated descriptions of ultrafast phenomena beyond the Born-Oppenheimer approximation as well as ultrafast probes of spatial fluctuations beyond the average unit cell measured by diffraction.

36 MATERIALS SCIENCE↗
DOE OSTI2024

3D imaging of magnetic domains in Nd 2 Fe 14 B using scanning hard X-ray nanotomography

Nanoscale structural and electronic heterogeneities are prevalent in condensed matter physics. Investigating these heterogeneities in 3D has become an important task for understanding material properties. To provide a tool to unravel the connection between nanoscale heterogeneity and macroscopic emergent properties in magnetic materials, scanning transmission X-ray microscopy (STXM) is combined with X-ray magnetic circular dichroism. A vector tomography algorithm has been developed to reconstruct the full 3D magnetic vector field without any prior noise assumptions or knowledge about the sample. Two tomographic scans around the vertical axis are acquired on single-crystalline Nd 2 Fe 14 B pillars tilted at two different angles, with 2D STXM projections recorded using a focused 120 nm X-ray beam with left and right circular polarization. Image alignment and iterative registration have been implemented based on the 2D STXM projections for the two tilts. Dichroic projections obtained from difference images are used for the tomographic reconstruction to obtain the 3D magnetization distribution at the nanoscale.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Energetics of polymeric carbon monoxide

The transformation of carbon monoxide (CO) from a molecular liquid to a polymeric solid under isothermal compression at room temperature is investigated using first principles theory. We report structural and thermodynamic properties from ambient density up to 2.45 g/cc obtained using density functional theory molecular dynamics simulations, including hybrid exchange corrections. The theoretical results are compared with newly obtained polymeric CO samples, synthesized in a large volume press. The explosive performance of polymeric CO is predicted and discussed. Under most favorable assumptions, it is found to be comparable to trinitrotoluene.

25 ENERGY STORAGE↗
DOE OSTI2020

TURBOMOLE: Modular program suite for ab initio quantum-chemical and condensed-matter simulations

TURBOMOLE is a collaborative, multi-national software development project aiming to provide highly efficient and stable computational tools for quantum chemical simulations of molecules, clusters, periodic systems, and solutions. The TURBOMOLE software suite is optimized for widely available, inexpensive, and resource-efficient hardware such as multi-core workstations and small computer clusters. TURBOMOLE specializes in electronic structure methods with outstanding accuracy–cost ratio, such as density functional theory including local hybrids and the random phase approximation (RPA), GW-Bethe–Salpeter methods, second-order Møller–Plesset theory, and explicitly correlated coupled-cluster methods. TURBOMOLE is based on Gaussian basis sets and has been pivotal for the development of many fast and low-scaling algorithms in the past three decades, such as integral-direct methods, fast multipole methods, the resolution-of-the-identity approximation, imaginary frequency integration, Laplace transform, and pair natural orbital methods. This review focuses on recent additions to TURBOMOLE’s functionality, including excited-state methods, RPA and Green’s function methods, relativistic approaches, high-order molecular properties, solvation effects, and periodic systems. A variety of illustrative applications along with accuracy and timing data are discussed. Moreover, available interfaces to users as well as other software are summarized. TURBOMOLE’s current licensing, distribution, and support model are discussed, and an overview of TURBOMOLE’s development workflow is provided. Challenges such as communication and outreach, software infrastructure, and funding are highlighted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Designed metal-insulator transition in low-symmetry magnetic intermetallics

Compounds exhibiting half-metallic character and metal-insulator transitions draw considerable attention in condensed-matter and materials physics due to their potential use in spintronics. Here we show that specific electron doping plays a crucial role in tailoring thermodynamic, structural, electronic, and magnetic properties of materials derived from low-symmetry magnetic intermetallics, exemplified on triclinic Mn 4 Al 11 . Upon chemical doping of Al by Ge, we predict improved phase stability and adherence to a generalized “18-n rule” governing closed-shell configurations in intermetallic with narrow bandgaps. Validating experiments include measurements of phase stability and electronic transport properties of electron-doped Mn 4 Al 10 Ge that crystallizes in the Mn 4 Al 11 -type structure, confirming the bandgap opening as predicted by chemical analysis and density-functional theory. Here we also demonstrate theoretically that hydrostatic pressure enhances the predicted half-metallic gap in the up-spin channel, which leads to a ferrimagnetic-to-ferromagnetic transition driven by Mn-Mn charge ordering in the Mn 4 Al 11 parent. We have also discussed the generality of our approach in predicting the design of other classes of intermetallics including half and full Heusler compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Two-level systems in nucleated and non-nucleated epitaxial alpha-tantalum films

Building usefully coherent superconducting quantum processors depends on reducing losses in their constituent materials. Tantalum, like niobium, has proven utility as the primary superconducting layer within highly coherent qubits. However, unlike Nb, high temperatures are typically used to stabilize the desirable body-centered-cubic phase, α-Ta, during thin film deposition. It has long been known that a thin Nb layer permits the room-temperature nucleation of α-Ta, but here we observe the epitaxial process and present few-photon microwave loss measurements in Nb-nucleated Ta films. We compare resonators patterned from Ta films grown at high temperature (500 °C) and films nucleated at room temperature, in order to understand the impact of the crystalline order on quantum coherence. In both cases, films grew with Al 2 O 3 (001) ∥ Ta (110), indicating that the epitaxial orientation is independent of temperature and is preserved across the Nb/Ta interface. We use conventional low-power spectroscopy to measure two level system (TLS) loss as well as an electric-field bias technique to measure the effective dipole moments of TLS in the surfaces of resonators. In our measurements, Nb-nucleated Ta resonators had greater loss tangent (1.5 ± 0.1 × 10 -5 ) than non-nucleated (5 ± 1× 10 -6 ) in approximate proportion to defect densities as characterized by x-ray diffraction (0.27° vs 0.18° [110] reflection width) and electron microscopy (30 vs 70 nm domain size). Furthermore, the dependence of the loss tangent on domain size indicates that the development of more ordered Ta films is likely to lead to improvements in qubit coherence times. Moreover, low-temperature α-Ta epitaxy may enable the growth of microstate-free heterostructures, which would not withstand high temperature processing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Investigations of Dimensionally-Constrained Fermions

This project dealt with the investigation of bulk condensed matter materials that contain low-dimensional substructures. The main focus was materials with one-dimensional conducting or magnetic chains. This report describes the activities undertaken during the course of this project.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Disentangling High Harmonic Generation from Surface and Bulk States of a Topological Insulator

The discovery of topological phases has introduced a new dimension to materials science. Three-dimensional (3D) topological insulators (TIs) are a remarkable class of matter that is insulating in the bulk while hosting conductive topological surface states (TSSs) with unique charge and spin properties. High-order harmonic generation (HHG) has emerged as a powerful tool to probe condensed matter systems by providing insights into their electronic structure and dynamic behavior. Here, we investigate HHG in the prototype 3D-TI Bi$_2$Se$_3$. We demonstrate that the contributions of bulk and surface states to the harmonic emission can be controlled by tuning the thickness of thin film samples. An ultrathin (6 nm) film substantially enhances HHG from the surface states, while the bulk states dominate HHG in a thicker (50 nm) film. By applying a quasi-static terahertz perturbing field, we disentangle the bulk and surface responses and reveal the significant impact of the surface states' shift vector and Berry curvature on HHG. Our study provides effective methods for isolating the optical responses of TSSs from those of the bulk, which opens the door to resolving an ongoing debate regarding whether it is possible to reliably extract topological signatures in HHG.

Atomic Physics (physics.atom-ph)↗
DOE OSTI2020

Path integral Monte Carlo and density functional molecular dynamics simulations of warm dense MgSiO 3

In order to provide a comprehensive theoretical description of MgSiO 3 at extreme conditions, we combine results from path integral Monte Carlo and density functional molecular dynamics simulations and generate a consistent equation of state for this material. We consider a wide range of temperature and density conditions from 10 4 to 10 8 K and from 0.321 to 64.2 g/cm -3 (0.1- to 20-fold the ambient density). We study how the L and K shell electrons are ionized with increasing temperature and pressure. We derive the shock Hugoniot curve and compare with experimental results. Our Hugoniot curve is in good agreement with the experiments, and we predict a broad compression maximum that is dominated by the K shell ionization of all three nuclei while the peak compression ratio of 4.70 is obtained when the Si and Mg nuclei are ionized. To conclude, we analyze the heat capacity and structural properties of the liquid.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Absence of long-range magnetic order in Fe 1–δ Te 2 (δ ≈ 0.1) crystals

Transition metal dichalcogenides attract considerable attention due to variety of interesting properties, including long range magnetism in nanocrystals. Here we have investigated magnetic, thermal and electrical properties of FeTe 2 single crystal with iron vacancy defects. Magnetic measurements shows paramagnetic state and the absence of magnetic order with small anisotropy in magnetic susceptibility. Fe 3d orbitals are well hybridized, contributing to bad metal electrical resistivity. Observed thermal conductivity values below room temperature are rather low and comparable to high performance thermoelectric materials. Furthermore, our results indicate that FeTe 2 can form in highly defective marcasite crystal structure which can be exploited in future materials design.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Surface Local Impurity Scattering as a Probe for Topological Kondo Insulators

Shortly after the discovery of topological band insulators, topological Kondo insulators (TKIs) is also theoretically predicted. The latter has ignited revival interest in the properties of Kondo insulators. Currently, the feasibility of topological nature in SmB 6 is intensively analyzed by several complementary probes. Here by starting with a minimal-orbital Anderson lattice model, the local electronic structure is explored in a Kondo insulator. It is showed that the two strong topological regimes sandwiching the weak topological regime give rise to a single Dirac cone, which is located near the center or corner of the surface Brillouin zone. It is further found that, when a single impurity is placed on the surface, low-energy resonance states are induced in the weak scattering limit for the strong TKI regimes and the resonance level moves monotonically across the hybridization gap with the strength of impurity scattering potential; while low energy states can only be induced in the unitary scattering limit for the weak TKI regime, where the resonance level moves universally toward the center of the hybridization gap. These impurity-induced low-energy quasiparticles will lead to characteristic signatures in scanning tunneling microscopy/spectroscopy, which has recently found success in probing into exotic properties in heavy fermion systems.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Time-resolved in situ visualization of the structural response of zeolites during catalysis

Zeolites form an important class of materials that are widely used in various fields. Their unique properties come primarily from their size, shape, and connectivity of their sub-nm crystalline voids, the Si/Al ratio of the anionic framework, and the number and the nature of charge-balancing cations.The inhomogeneous distribution of the Si/Al ratio within crystals, and hence the cation density, the presence of organic residues, and their inhomogeneous distribution within crystals sensitively affect their performances because these factors influencethe intra-crystalline diffusion rates of the reactants and products. However, the information regarding these inhomogeneities in zeolite crystals cannot be obtained by conventional analytical tools because they only provide information regardingthe average properties of zeolite crystals. Here we employin situX-ray free electron laser-based time-resolved coherent X-ray diffraction imaging to investigate the internal deformations originating from the inhomogeneous Cu ion distributions in Cu-exchanged ZSM-5 zeolite crystals during the deoxygenation of nitrogen oxides with propene. We show that the interactions between the reactants and the active sites lead to an unusual strain distribution,which is confirmed by density functional theory simulations. Moreover, this elucidates the factors responsible for distinct active regions,which are essential to maximizing some applications with enhanced performances. These observations provide insights into the role of structural inhomogeneity in zeolites during a catalytic processand will assist the future design of zeolites for their applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Gate field effects on the topological insulator BiSbTeSe 2 interface

Interfaces between two topological insulators are of fundamental interest in condensed matter physics. Inspired by experimental efforts, we study interfacial processes between two slabs of BiSbTeSe 2 (BSTS) via first principles calculations. Topological surface states are absent for the BSTS interface in its equilibrium separation, but our calculations show that they appear if the inter-slab distance is greater than 6 Å. More importantly, we find that topological interface states can be preserved by inserting two or more layers of hexagonal boron nitride between the two BSTS slabs. In experiments, the electric current tunneling through the interface is insensitive to back gate voltage when the bias voltage is small. Using a first-principles based method that allows us to simulate the gate field, we show that at low bias, the extra charge induced by a gate voltage resides on the surface that is closest to the gate electrode, leaving the interface almost undoped. This provides clues to understand the origin of the observed insensitivity of transport properties to back voltage at low bias. Our study resolves a few questions raised in experiment, which does not yet offer a clear correlation between microscopic physics and transport data. We provide a road map for the design of vertical tunneling junctions involving the interface between two topological insulators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Kohn anomaly and elastic softening in body-centered cubic molybdenum at high pressure

Transition metals in body-centered cubic (bcc) structures under compression can display several novel physical properties because of their complex electronic structures and electron-phonon interactions. Here, we used inelastic x-ray scattering experiments in a diamond-anvil cell up to ∼45 GPa and density-functional theory calculations up to 210 GPa to investigate the phonon dispersions, and electronic and elastic properties of single-crystal molybdenum (Mo). Our results show a pressure-induced Kohn anomaly at 𝑞∼0.5 along the [ξ00] direction in the longitudinal acoustic mode at ∼45 GPa; this anomaly is triggered by the pressure-enhanced Fermi-surface nesting effect. Theoretical calculations show that electron redistributions in the 𝑠-to-𝑑 orbitals of bcc-Mo contribute to the shear modulus anomaly at ∼50 GPa. In contrast, the Young's modulus anomaly in bcc-Mo at ∼210 GPa results from a Lifshitz-type electronic topological transition. In conclusion, our results shed light on the complex electronic behaviors that are associated with macroscopic elastic properties in typical bcc 𝑑-block transition metals under compression.

3-dimensional systems↗
DOE OSTI2022

Unconventional short-range structural fluctuations in cuprate superconductors

Abstract The interplay between structural and electronic degrees of freedom in complex materials is the subject of extensive debate in physics and materials science. Particularly interesting questions pertain to the nature and extent of pre-transitional short-range order in diverse systems ranging from shape-memory alloys to unconventional superconductors, and how this microstructure affects macroscopic properties. Here we use neutron and X-ray diffuse scattering to uncover universal structural fluctuations in La 2-x Sr x CuO 4 and Tl 2 Ba 2 CuO 6+δ , two cuprate superconductors with distinct point disorder effects and with optimal superconducting transition temperatures that differ by more than a factor of two. The fluctuations are present in wide doping and temperature ranges, including compositions that maintain high average structural symmetry, and they exhibit unusual, yet simple scaling behaviour. The scaling regime is robust and universal, similar to the well-known critical fluctuations close to second-order phase transitions, but with a distinctly different physical origin. We relate this behaviour to pre-transitional phenomena in a broad class of systems with structural and magnetic transitions, and propose an explanation based on rare structural fluctuations caused by intrinsic nanoscale inhomogeneity. We also uncover parallels with superconducting fluctuations, which indicates that the underlying inhomogeneity plays an important role in cuprate physics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗