Search NASA⌕ Search

SEARCH · Search NASA

Results for “Subsurface hydrology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

85 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Antecedent Hydrologic Conditions Reflected in Stream Lithium Isotope Ratios During Storms

Antecedent hydrological conditions are recorded through the evolution of dissolved lithium isotope signatures (δ 7 Li) by juxtaposing two storm events in an upland watershed subject to a Mediterranean climate. Discharge and δ 7 Li are negatively correlated in both events,but mean δ 7 Li ratios and associated ranges of variation are distinct between them. We apply a previously developed reactive transport model (RTM) for the site to these event-scale flow perturbations, but observed shifts in stream δ 7 Li are not reproduced. To reconcile the stability of the subsurface solute weathering profile with our observations of dynamic stream δ 7 Li signatures, we couple the RTM to a distribution of fluid transit times that evolve based on storm hydrographs. The approach guides appropriate flux-weighting of fluid from the RTM over a range of flow path lengths, or equivalently fluid residence times. This flux-weighted RTM approach accurately reproduces dynamic storm δ 7 Li-discharge patterns distinguished by the antecedent conditions of the watershed.

58 GEOSCIENCES↗
DOE OSTI2025

Representing lateral groundwater flow from land to river in Earth system models

Lateral groundwater flow (LGF) is an important hydrologic process in controlling water table dynamics. Due to the relatively coarse spatial resolutions of land surface models, the representation of this process is often overlooked or overly simplified. In this study, we developed a hillslope-based lateral groundwater flow model. Specifically, we first developed a hillslope definition model based on an existing watershed delineation model to represent the subgrid spatial variability in topography. Building upon this hillslope definition, we then developed a physical-based lateral groundwater flow using Darcy’s equation. This model explicitly considers the relationships between the groundwater table along the hillslope and the river water table levels. We coupled this intra-grid model to the land component (E3SM Land Model: ELM) and river component (MOdel for Scale Adaptive River Transport: MOSART) of the Energy Exascale Earth System Model (E3SM). We tested both the hillslope definition model and the lateral groundwater flow model and performed sensitivity experiments using different configurations. Simulations for a single grid cell at 0.5°×0.5° within the Amazon basin show that the definition of hillslope is the key to modeling lateral flow processes and the runoff partition between surface and subsurface can be dramatically changed using the hillslope approach. Although our method provides a pathway to improve the lateral flow process, future improvements are needed to better capture the subgrid structure to account for the spatial variability in hillslopes within the simulated grid of land surface models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Characterization of Most Promising Sequestration Formations in the Rocky Mountain Region

The project Characterization of Most Promising Sequestration Formations in the Rocky Mountain Region is one of 9 site characterization projects that were implemented as part of ARRA (American Recovery and Reinvestment Act). Data from this project was used to improve resolution of data in NATCARB in the area of study. Data related to this study has already been incorporated in NATCARB Atlas. The Rocky Mountain Carbon Capture and Storage (RMCCS) project investigated multiple geologic formations and characterized a local site on the Colorado Plateau for future CCS opportunities. The RMCCS project focused on the Cretaceous Dakota, Jurassic Entrada, and Pennsylvanian Weber Sandstones, the three largest regional formations. All formations in this project are potential CO2 storage resources for future power plants, natural gas processing plants, cement plants, and oil shale development projects. The area adjacent to Craig, Colorado, (Sand Wash Basin) was the area selected for detailed geologic characterization on the RMCCS project. The basin was selected in part because the geology can be extrapolated to other sites on the Colorado Plateau. Field mapping and seismic surveys were conducted to identify and evaluate the basin's structural configuration. A 9,745-foot deep characterization well was drilled to collect 131 feet of core and a suite of geophysical well log data. Petrophysical tests on samples of core were used to calibrate geophysical log data, which can be used to obtain storage resource estimates and evaluate associated uncertainty as well as simulate the hydrologic behavior of injected CO2. A detailed analysis of the primary formations (Dakota, Entrada and Weber sandstones) yielded a more accurate CO2 storage resource assessment for these formations within the Colorado Plateau; RMCCS estimates indicate a total CO2 storage resource of more than 38,000 million metric tons. The characterization of the Sand Wash Basin (2-D seismic surveys, multiple well logs and lithological, petrophysical and geochemical analyses) allowed for a detailed 3-D model to be constructed. The model served as the framework for analyses ranging from CO2 storage resource, injectivity, and subsurface flow to uncertainty estimates to evaluation of risk.

2-D seismic↗
DOE OSTI2024

Impacts of Sea‐Level Rise on Coastal Groundwater Table Simulated by an Earth System Model With a Land‐Ocean Coupling Scheme

Abstract Sea‐level rise (SLR) poses a severe threat to the coastal environment through seawater intrusion into freshwater aquifers. The rising groundwater table also exacerbates the risk of pluvial, fluvial, and groundwater flooding in coastal regions. However, current Earth system models (ESMs) commonly ignore the exchanges of water at the land‐ocean interface. To address this gap, we developed a novel land‐ocean hydrologic coupling scheme in a state‐of‐the‐science ESM, the Energy Exascale Earth System Model version 2 (E3SMv2). The new scheme includes the lateral exchange between seawater and groundwater and the vertical infiltration of seawater driven by the SLR‐induced inundation. Simulations were performed with the updated E3SMv2 for the global land‐ocean interface to assess the impacts of SLR on coastal groundwater under a high CO 2 emission scenario. By the middle of this century, seawater infiltration on the inundated areas will be the dominant component in the land‐ocean coupling process, while the lateral subsurface flow exchange will be much smaller. The SLR‐induced seawater infiltration will raise the groundwater levels, enhance evapotranspiration, and increase runoff with distinct spatial patterns globally in the future. Although the coupling process is induced by SLR, we found topography and warming temperature have more control on the coupling impacts, probably due to the relatively modest magnitude of SLR during the selected future period. Overall, our study suggests significant groundwater and seawater exchange at the land‐ocean interface, which needs to be considered in ESMs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Data for Machado-Silva et al. (2024), "Short-Term Groundwater Level Fluctuations Drive Subsurface Redox Variability"

This dataset contains the analytical data reported in Machado-Silva et al. (2024) as part of the COMPASS-FME project, which seeks to advance a scalable, predictive understanding of the fundamental biogeochemical processes, ecological structure, and ecosystem dynamics that distinguish coastal terrestrial-aquatic interfaces from the purely terrestrial or aquatic systems to which they are coupled. The dataset consists of water quality parameters as well as redox potential, water content, and electrical conductivity. These data were collected in 2022 in Crane Creek (CRC), Portage River (PTR), and Old Woman Creek (OWC). Each of these sites included uplands (UP), transitions (TR), wetland-transition edge (WTE), and wetland (W) zones. The sites represent replicates of the Lake Erie terrestrial-aquatic interface under fluctuating water levels and are located in well-preserved areas with natural or restored marsh and forest cover.This dataset consists of a single data file (Machado_Silva_et_al_2024_EST_data.csv) that is in comma-separated value (CSV) format. No special software is required to read it.This dataset uses the ESS-DIVE Hydrologic Monitoring Reporting Format 1.0.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Community-Informed Urban Flood Modeling for Impact Mitigation

The intensification of the hydrologic cycle due to climate change poses a threat to aging and under-designed water infrastructure systems which cannot adequately manage intense storm events. Developing a comprehensive plan for managing rain-driven flooding events is challenging due to uncertainties in the magnitude and frequency of future storm events and conflicting stakeholder objectives. In the City of Baltimore, Maryland, stormwater infrastructure is struggling to keep up with rainfall-driven (pluvial) flooding events, which regularly damage housing and disrupt transportation for residents. In this study, a hybrid of community engagement, numerical modeling, and artificial intelligence techniques are employed to explore prospective urban flooding adaptations. Community engagement drives the development of an urban flooding model (EPA Storm Water Management Model) for the Baltimore Harbor watershed. The model integrates complex surface and subsurface stormwater infrastructure data from the City, high-resolution spatial data, insights from local public works experts, and the lived experiences of City residents. This co-developed model simulates adaptations of interest to stakeholders in the city, including green and grey infrastructure and operational management strategies. Stormwater management scenarios focused on inlet cleaning and spatially concentrated green infrastructure are found to be the most effective in reducing flood depths in community priority locations. Together, these adaptations can reduce the duration of intersection inundation by more than twenty minutes, allowing for quicker emergency response and restoration of typical transportation systems. Future work will combine this community engaged flooding model with the Deep Uncertainties Pathways framework to explore tradeoffs between adaptations and develop dynamic adaptations which align with community objectives, enhance climate resilience in Baltimore, and can be adjusted in response to changing future conditions.

Ava, Spangler [Pennsylvania State University]↗
DOE OSTI2024

Integrated Effects of Site Hydrology and Vegetation on Exchange Fluxes and Nutrient Cycling at a Coastal Terrestrial‐Aquatic Interface

Abstract The complex interactions among soil, vegetation, and site hydrologic conditions driven by precipitation and tidal cycles control the biogeochemical transformations and bi‐directional exchange of carbon and nutrients across the terrestrial–aquatic interfaces (TAIs) in coastal regions. This study uses a highly mechanistic model, Advanced Terrestrial Simulator (ATS)‐PFLOTRAN, to explore how these interactions affect exchanges of materials and carbon and nitrogen cycling. We used a transect in the Chesapeake Bay region that spans zones of open water, coastal wetland, transition, and upland forest. We designed several simulation scenarios to parse the effects of the individual controlling factors and the sensitivity of carbon cycling to reaction rate parameters derived from laboratory experiments. Our simulations reveal an active zone for carbon cycling under the transition zones between the wetland and the upland. Evapotranspiration is found to enhance the exchange fluxes between the surface and subsurface domains, resulting in a higher dissolved oxygen concentration in the TAIs. The transport of organic carbon derived from plant leaves and roots provide an additional source of organic carbon needed for the aerobic respiration and denitrification processes in the TAIs. The variability in reaction rate parameters associated with microbial activities is also found to play a dominant role in controlling the heterogeneity and dynamics of the simulated redox conditions. This modeling‐focused exploratory study enabled us to better understand the complex interactions among soil, water and microbes that govern the hydro‐biogeochemical processes at the TAIs, which is an important step toward representing coastal ecosystems in larger‐scale Earth system models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Data from: “Bald Cypress (Taxodium distichum) Knees Are Methane Sources Controlled by Geomorphology, Climate, and Hydrologic Extremes”

This dataset is associated with the manuscript “Bald Cypress (Taxodium distichum) Knees Are Methane Sources Controlled by Geomorphology, Climate, and Hydrologic Extremes”. Bald cypress “knees” (aboveground woody roots) have been shown to contribute to wetland methane (CH4) efflux, with large variation within and between studies. To explain this variation, we investigated spatial (i.e., across knee surface, within sites, between sites) and temporal dynamics of CH4 fluxes from knees. Methane fluxes were collected from September 2022 to August 2024 at three locations in western Kentucky, USA, within the Mississippi Alluvial Valley: a main channel (semi-permanently flooded), side channel (seasonally flooded), and reservoir edge (artificially flooded). Knee CH4 fluxes (“Ross_et_al_Knee_Flux_Data.csv”) were measured from multiple heights on knees (20, 40, and 60 cm) of various sizes (knee straight height ranged from 24 to 93 cm) using a LiCOR LI-7810 CH4/CO2/H2O Trace Gas Analyzer. The dataset also includes environmental variables collected with each knee measurement, including water level adjusted for knee-to-knee elevational differences, subsurface and air temperature, and humidity. Soil CH4 fluxes (“Ross_et_al_Soil_Flux_Data.csv”) were also collected adjacent to knees (starting in April 2023) when water levels didn’t overtop soil collars, using a LiCOR Smart Chamber and calculated in SoilFluxPro software. The soil flux dataset includes associated variables collected by the Smart Chamber. Three separate files (“*_Water_Level.csv”) are included for water level and subsurface temperature data collected at each site using HOBO U20L barometric pressure loggers. Each file type (knee flux, soil flux, water level) has an associated data dictionary (“*_dd.csv”). For specifics on methodology used and calculations, see the associated manuscript. The R script includes code used for figures and analyses reported in the manuscript.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Drought-induced changes in groundwater-surface water exchange at Lake Mead area

This study focuses on the Lake Mead region in the southwestern United States, a key water reservoir serving over 25 million people and agricultural lands across several states. The area has experienced recurring anthropogenic droughts since the early 2000s. We investigate the hydrological response of the coupled surface-groundwater system to the 2020–2022 drought, one of the most severe on record. To this end, we use Sentinel-1 Interferometric Synthetic Aperture Radar (InSAR) data to quantify vertical land motion caused by the elastic response of the crust to water-mass loss in the lake vicinity. Next, we apply an inverse elastic load modeling framework to quantify water loss. We further assess possible hydraulic connectivity between Lake Mead and adjacent groundwater reservoirs. We detect ground uplift of up to 8 mm/yr near the lake center, likely due to crustal rebound from reduced water-mass loading. We estimated the total water storage loss at 3.03 ± 0.25 km 3 /yr across a 3150 km 2 area surrounding Lake Mead. Groundwater accounts for approximately a third of that, being 0.94 ± 0.32 km 3 /yr. In addition, observed time lags of 6–98 days between lake and groundwater level responses, corresponding to a lateral diffusivity of 3.2–86 m 2 /s, suggest spatially variable connectivity between the lake and aquifers. These findings highlight that drought impacts propagate through the subsurface within interconnected systems, resulting in reduced buffering capacity of groundwater resources following droughts, and emphasizing the need for more integrated surface and groundwater management strategies to enhance resilience under climate and anthropogenic stressors.

58 GEOSCIENCES↗
DOE OSTI2025

Methane emission hotspots in a boreal forest-fen mosaic potentially linked to deep taliks

Permafrost thaw is transforming boreal forests into mosaics of wetlands and drier uplands. Topographic controls on hydrological and ecological conditions impact methane (CH 4 ) fluxes, contributing to uncertainty in local and regional CH 4 budgets and underlying drivers. The objective of this study was to explore CH 4 fluxes and their drivers in a transitioning boreal forest-fen ecosystem (Goldstream Valley, Alaska, USA). This landscape is characterized by thawing discontinuous permafrost and heterogeneous mosaics of fens, collapse-scar channels, and small mounds of permafrost soils. From a survey in July 2021, observed chamber CH4 fluxes included fen areas with intermediate to very high emissions (29.8–635.3 mg CH 4 m −2 d −1 ), clustered locations with CH 4 uptake (−2.11 to −0.7 mg CH 4 m −2 d −1 ), and three anomalous emission hotspots (342.4–772.4 mg CH 4 m −2 d −1 ) that were located near samples with lower emissions. Some surface and near-surface variables partially explained the spatial variation in CH 4 flux. Log-transformed CH 4 flux had a positive linear relationship with soil moisture at 20 cm depth ( R 2 = 0.31, p -value < 1e-5) and negative linear relationships with microtopography ( R 2 = 0.13, p -value < 0.006) and slope ( R 2 = 0.28, p -value < 2e-5). Methane emissions generally occurred in flat, wet, graminoid-dominated fens, whereas CH 4 uptake occurred on permafrost mounds dominated by feather mosses and woody vegetation. However, the CH 4 hotspots occurred on drier, slightly sloped locations with low or undetectable near-surface methanogen abundance, suggesting that CH 4 was produced in deeper soils. When the hotspot samples were omitted, log-transformed CH 4 flux had a positive linear relationship with near-surface methanogen abundance ( R 2 = 0.29, p -value = 0.0023), and stronger linear relationships with soil moisture, slope, and soil macronutrient concentrations. Our findings suggest that some CH 4 emission hotspots could arise from CH 4 in deep taliks. The inference that methanogenesis occurs in deep taliks was strengthened by the identification of intrapermafrost taliks across the study area using low-frequency geophysical induction. This study assesses surface spatial heterogeneity in the context of subsurface permafrost conditions and highlights the complexity of CH 4 flux patterns in transitioning forest-wetland ecosystems. To better inform regional CH 4 budgets, further research is needed to understand the spatial distribution of terrestrial CH 4 hotspots and to resolve their surface, near-surface, and subsurface drivers.

boreal↗
DOE OSTI2025

Development of an ERT‐Based Framework for Bentonite Buffers Monitoring From Laboratory Tests: 1. Characterizing Thermal–Hydrological–Mechanical Processes

Abstract Bentonite clay is widely used in engineered barrier systems for the permanent disposal of high‐level radioactive waste due to its low permeability, high swelling capacity, and thermal stability. However, the complex thermal‐hydrological‐mechanical (THM) processes induced by heating from decaying radioactive waste and hydration from surrounding rock can lead to heterogeneous changes that are difficult to measure and predict. This study develops an Electrical Resistivity Tomography (ERT)‐based framework for monitoring THM processes, progressing from sample‐scale to bench‐scale tests, to inform field‐scale applications. Sample‐scale tests analyzed small bentonite samples under controlled variations in water content, temperature, and porosity to establish fundamental resistivity relationships. Bench‐scale tests involved larger bentonite columns subjected to heating (up to 200°C) and hydration under controlled pressure, simulating repository conditions. ERT measurements, complemented by X‐ray CT imaging, temperature monitoring, and tracing sensors, revealed coupled THM processes, such as hydration‐induced compression, swelling, and thermal gradients, leading to complex resistivity patterns. The results demonstrate the potential of ERT for capturing THM‐induced resistivity changes, though challenges remain in upscaling and quantitative analysis. This study evaluates laboratory test capabilities and proposes future improvements for understanding THM‐induced resistivity responses. A conceptual framework for ERT implementation in field‐scale monitoring is presented, synthesizing findings from both scales and exploring how ERT data can inform long‐term modeling and reduce prediction uncertainties. Overall, this ERT‐based framework offers a robust method for monitoring bentonite buffers, aiding in early issue detection and supporting the safe long‐term disposal of radioactive waste in geological repositories, while highlighting the need for future development. Plain Language Summary Bentonite clay is crucial in engineered barrier systems (EBS) for containing high‐level radioactive waste due to its ability to absorb water, swell, seal and remain stable under high temperatures. When bentonite absorbs water and heats up from radioactive decay, it experiences complex changes in its physical and mechanical properties. Understanding these changes is important for ensuring the long‐term safety and effectiveness of EBS. This study used Electrical Resistivity Tomography (ERT), a non‐invasive method that measures electrical conductivity to monitor these changes during laboratory experiments. The ERT data revealed significant variations in resistivity corresponding to changes in water content, temperature, and density, providing detailed spatial and temporal insights into the behavior of bentonite. These findings enhance our ability to predict the long‐term performance of bentonite barriers, ensuring the safe containment of radioactive waste. By improving our understanding of bentonite's behavior, this research supports the development of more reliable and effective barrier systems for radioactive waste disposal, protecting the environment and public health. Key Points ERT monitoring was employed to capture resistivity changes in bentonite during controlled heating and hydration experiments, providing insights into THM processes ERT data reveal significant resistivity changes correlated with water content, temperature, and mechanical effects, enhancing the understanding of THM dynamics in bentonite This study explores the potential of the framework for application in field‐scale EBS monitoring, emphasizing the need for integrating additional geophysical methods for comprehensive subsurface imaging

Chen, Hang↗
DOE OSTI2025

Permeability scaling relationships of volcanic tuff from core to field scale measurements

A recent chemical explosive test in P-Tunnel at the Nevada National Security Site, Nevada, USA, was conducted to better understand how signals propagate from explosions in the subsurface. A primary signal of interest is the migration of gases that can be used to differentiate chemical from nuclear explosions. Gas migration is highly dependent on the rock permeability which is notoriously difficult to determine experimentally in the field due to a potentially large dependence on the scale over which measurements are made. Here, we present pre-explosion permeability estimates to characterize the geologic units surrounding the recent test. Permeability measurements were made at three scales of increasing size: core samples (≈2 cm), borehole packer system tests (≈1 m), and a pre-shot cavity pressurization test (> 10 m) across ten tuff units. Permeability estimates based on core measurements showed little difference from borehole packer tests. However, permeability in most rock units calibrated from cavity pressurization tests resulted in higher permeability estimates by up to two orders of magnitude. Here, we demonstrate that the scale of the measurement significantly impacts the characterization efforts of hydraulic properties in volcanic tuff, and that local-scale measurements (< 10 m scale) do not incorporate enough heterogeneity to accurately predict field-scale flow and mass transport.

Environmental sciences↗
DOE OSTI2026

Location Identifiers, Metadata, and Map for Field Measurements at the East-Taylor Watershed Community Observatory, Colorado, USA (Version 3.3)

This dataset contains identifiers, metadata, and a map of the locations where field measurements have been conducted at the East-Taylor Watershed Community Observatory located in the Upper Colorado River Basin, United States. This is version 3.3 of the dataset and replaces the prior version 3.2 (see below for details on changes between the versions). Dataset description: The East River-Taylor Watershed is the primary field site of the Watershed Function Scientific Focus Area (WFSFA) and the Rocky Mountain Biological Laboratory. Researchers from several institutions generate highly diverse hydrological, biogeochemical, climate, vegetation, geological, remote sensing, and model data at the East-Taylor Watershed in collaboration with the WFSFA. Thus, the purpose of this dataset is to maintain an inventory of the field locations and instrumentation to provide information on the field activities in the East-Taylor Watershed and coordinate data collected across different locations, researchers, and institutions. The dataset contains (1) a README file with information on the various files, (2) three csv files describing the metadata collected for each surface point location, plot and region registered with the WFSFA, (3) csv files with metadata and contact information for each surface point location registered with the WFSFA, (4) a csv file with with metadata and contact information for plots, (5) a csv file with metadata for geographic regions and sub-regions within the watershed, (6) a compiled xlsx file with all the data and metadata which can be opened in Microsoft Excel, (7) a kml map of the locations plotted in the watershed which can be opened in Google Earth, (8) a jpg image of the kml map which can be viewed in any photo viewer, and (9) a zipped file with the registration templates used by the SFA team to collect location metadata. The zipped template file contains two csv files with the blank templates (point and plot), two csv files with instructions for filling out the location templates, and one compiled xlsx file with the instructions and blank templates together. Additionally, the templates in the xlsx include drop down validation for any controlled metadata fields. Persistent location identifiers (Location_ID) are determined by the WFSFA data management team and are used to track data and samples across locations. Dataset uses: This location metadata is used to update the Watershed SFA’s publicly accessible Field Information Portal (an interactive field sampling metadata exploration tool; https://wfsfa-data.lbl.gov/watershed/), the kml map file included in this dataset, and other data management tools internal to the Watershed SFA team. Version Information: The latest version of this dataset publication is version 3.3. This version contains 167 new point locations, 1 new plot, and 2 new geographic regions. Overall, there are a total of 1439 point locations, 75 plots, and 54 geographic regions. Additionally, the kml map of locations and image now includes two boundaries (Upper Ohio Creek (UO) and Carbon Creek (CA)) outside of the East River watershed (USGS HUC-10) and accompanying stream network that represents areas of focus. Refer to methods for further details on the version history. This dataset will be updated on a periodic basis with new measurement location information. Researchers interested in having their East-Taylor Watershed measurement locations added to this list should reach out to the WFSFA data management team at wfsfa-data@googlegroups.com. Acknowledgments: Please cite this dataset if using any of the location metadata in other publications or derived products. If using the location metadata for the 2018 NEON hyperspectral campaign, additionally cite Chadwick et al. (2020). doi:10.15485/1618130. This work was supported by the Watershed Function Science Focus Area at Lawrence Berkeley National Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-05CH11231. Part of this work was performed at SLAC Accelerator Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-76SF00515.

2018 NEON and 2025 CHESS Campaigns↗