Search NASA⌕ Search

SEARCH · Search NASA

Results for “Subtraction Technique”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

SULI Research Report Paper

Hybrid-CMOS (hCMOS) nanosecond x-ray imagers are a powerful timeresolved HED (high-energy-density) diagnostic due to their sensitivity to visible light, x-rays, and charged particles. However, significant pseudosinusoidal background oscillations have been observed in these sensors when exposed to an early incident excitation, a phenomenon that has been experimentally linked the sensor’s bond wire inductance. We analyze the oscillations both in the time domain and spatially to account for variations on the pixel level. Both theoretical techniques and analysis of experimental data have shown that the oscillations are a global sensor phenomenon. In addition, we effectively describe the oscillations with a physics-based model, giving further insight into the processes affecting them. This technique allows the hCMOS user to subtract out the oscillations from their measurements and improve accuracy.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1992

COBE Differential Microwave Radiometers - Preliminary systematic error analysis

The techniques available for the identification and subtraction of sources of dynamic uncertainty from data of the Differential Microwave Radiometer (DMR) instrument aboard COBE are discussed. Preliminary limits on the magnitude in the DMR 1 yr maps are presented. Residual uncertainties in the best DMR sky maps, after correcting the raw data for systematic effects, are less than 6 micro-K for the pixel rms variation, less than 3 micro-K for the rms quadruple amplitude of a spherical harmonic expansion, and less than 30 micro-(K-squared) for the correlation function.

Kogut, A.↗
NASA NTRS1978

Computer image processing: Geologic applications

Computer image processing of digital data was performed to support several geological studies. The specific goals were to: (1) relate the mineral content to the spectral reflectance of certain geologic materials, (2) determine the influence of environmental factors, such as atmosphere and vegetation, and (3) improve image processing techniques. For detection of spectral differences related to mineralogy, the technique of band ratioing was found to be the most useful. The influence of atmospheric scattering and methods to correct for the scattering were also studied. Two techniques were used to correct for atmospheric effects: (1) dark object subtraction, (2) normalization of use of ground spectral measurements. Of the two, the first technique proved to be the most successful for removing the effects of atmospheric scattering. A digital mosaic was produced from two side-lapping LANDSAT frames. The advantages were that the same enhancement algorithm can be applied to both frames, and there is no seam where the two images are joined.

Abrams, M. J.↗
DOE OSTI2025

Hybrid Additive and Subtractive Manufacturing of Dual‐Wavelength Photopolymer Thermosets

Additive manufacturing (AM) techniques such as digital light processing (DLP) AM and stereolithography enable the production of highly complex structures with speed and ease as not previously possible. However, many traditional thermosetting photopolymers used in these processes result in a permanently crosslinked structure incapable of being broken down or modified without the use of energy-intensive processes such as mechanical machining or ablation. To overcome this limitation, this production is described of thiol-ene photopolymer thermosets with dual-wavelength photopolymerization and photodegradation reaction pathways. The dual wavelength selectivity of the polymerization (405 nm) and degradation (365 nm) processes, combined with dual-wavelength DLP AM technology, enables hybrid manufacturing with the ability to add and sequentially subtract material with excellent spatiotemporal control. 2D lithographs and complex 3D architectures with soft elastomeric properties are produced with resolutions as small as 50 µm. Furthermore, the ability to selectively subtract supports from 3D printed structures with deliberate and accurate control is demonstrated. In conclusion, the ability to correct or modify existing structures enables a new paradigm of adaptable materials for corrective manufacturing techniques and temporary structures.

3D Printing↗
DOE OSTI2026

Red Noise–based False Alarm Thresholds for Astrophysical Periodograms via Whittle’s Approximation to the Likelihood

Astronomers who search for periodic signals using Lomb–Scargle periodograms rely on false alarm level (FAL) estimates to identify statistically significant peaks. Although FALs are often calculated from white noise models, many astronomical time series suffer from red noise. Prewhitening is a statistical technique in which a continuum model is subtracted from the log power spectrum estimate, after which the observer can proceed with a white-noise treatment. Here we present a prewhitening-based method of calculating frequency-dependent FALs. We fit power laws and autoregressive models of order 1 to each Lomb–Scargle periodogram by minimizing the Whittle approximation to the negative log-likelihood (NLL), then calculate FALs based on the best-fit model power spectrum. Our technique is a novel extension of the Whittle NLL to datasets with uneven time sampling. We demonstrate FAL calculations using observations of α Cen B, GJ 581, HD 192310, synthetic data from the radial velocity (RV) fitting challenge, and Kepler observations of a differential rotator. The Kepler data analysis shows that only true rotation signals are detected by red noise FALs, while white noise FALs suggest all spurious peaks in the low-frequency range are significant. A high-frequency sinusoid injected into α Cen B logR$'$ HK observations exceeds the 1% red noise FAL despite having only 8.9% of the power of the dominant rotation signal. In a periodogram of HD 192310 RVs, peaks associated with differential rotation and planets are detected against the 5% red noise FAL without iterative model fitting or subtraction. The software for calculating red noise–based FALs is available on GitHub.

Astrostatistics (1882)↗
DOE OSTI2020

A novel CMB component separation method: hierarchical generalized morphological component analysis

ABSTRACT We present a novel technique for cosmic microwave background (CMB) foreground subtraction based on the framework of blind source separation. Inspired by previous work incorporating local variation to generalized morphological component analysis (GMCA), we introduce hierarchical GMCA (HGMCA), a Bayesian hierarchical graphical model for source separation. We test our method on Nside = 256 simulated sky maps that include dust, synchrotron, free–free, and anomalous microwave emission, and show that HGMCA reduces foreground contamination by $25{{\ \rm per\ cent}}$ over GMCA in both the regions included and excluded by the Planck UT78 mask, decreases the error in the measurement of the CMB temperature power spectrum to the 0.02–0.03 per cent level at ℓ > 200 (and $\lt 0.26{{\ \rm per\ cent}}$ for all ℓ), and reduces correlation to all the foregrounds. We find equivalent or improved performance when compared to state-of-the-art internal linear combination type algorithms on these simulations, suggesting that HGMCA may be a competitive alternative to foreground separation techniques previously applied to observed CMB data. Additionally, we show that our performance does not suffer when we perturb model parameters or alter the CMB realization, which suggests that our algorithm generalizes well beyond our simplified simulations. Our results open a new avenue for constructing CMB maps through Bayesian hierarchical analysis.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2016

A Synthesis of Star Calibration Techniques for Ground-Based Narrowband Electron-Multiplying Charge-Coupled Device Imagers Used in Auroral Photometry

A technique is presented for the periodic and systematic calibration of ground-based optical imagers. It is important to have a common system of units (Rayleighs or photon flux) for cross comparison as well as self-comparison over time. With the advancement in technology, the sensitivity of these imagers has improved so that stars can be used for more precise calibration. Background subtraction, flat fielding, star mapping, and other common techniques are combined in deriving a calibration technique appropriate for a variety of ground-based imager installations. Spectral (4278, 5577, and 8446 A ) ground-based imager data with multiple fields of view (19, 47, and 180 deg) are processed and calibrated using the techniques developed. The calibration techniques applied result in intensity measurements in agreement between different imagers using identical spectral filtering, and the intensity at each wavelength observed is within the expected range of auroral measurements. The application of these star calibration techniques, which convert raw imager counts into units of photon flux, makes it possible to do quantitative photometry. The computed photon fluxes, in units of Rayleighs, can be used for the absolute photometry between instruments or as input parameters for auroral electron transport models.

Grubbs, Guy II↗
NASA NTRS1999

Electric Field Double Probe Measurements for Ionospheric Space Plasma Experiments

Double probes represent a well-proven technique for gathering high quality DC and AC electric field measurements in a variety of space plasma regimes including the magnetosphere, ionosphere, and mesosphere. Such experiments have been successfully flown on a variety of spacecraft including sounding rockets and satellites. Typical instrument designs involve a series of trades, depending on the science objectives, type of platform (e.g., spinning or 3-axis stabilized), expected plasma regime where the measurements will be made, available telemetry, budget, etc. In general, ionospheric DC electric field instruments that achieve accuracies of 0.1 mV/m or better, place spherical sensors at large distances (10m or more) from the spacecraft body in order to extend well beyond the spacecraft wake and sheath and to achieve large signal-to-noise ratios for DC and long wavelength measurements. Additional sets of sensors inboard of the primary, outermost sensors provide useful additional information, both for diagnostics of the plasma contact potentials, which particularly enhance the DC electric field measurements on non-spinning spacecraft, and for wavelength and phase velocity measurements that use the spaced receiver or "interferometer" technique. Accurate attitude knowledge enables B times V contributions to be subtracted from the measured potentials, and permits the measured components to be rotated into meaningful geophysical reference frames. We review the measurement technique for both DC and wave electric field measurements in the ionosphere discussing recent advances involving high resolution burst memories, multiple baseline double probes, new sensor surface materials, biasing techniques, and other considerations.

Pfaff, R.↗
NASA NTRS1997

A quantitative assay for intercellular aggregation

In an earlier communication (Munn et al., J Immunol. Methods 166: 11-25, 1993), we presented the initial development of a quantitative assay for monitoring the rates of cellular aggregation based on digital image processing and video microscopy. This study describes some important enhancements and modifications to the procedure. A new index is introduced to characterize the three-dimensional morphology of the aggregates. This index is based on temporal changes in the projected area of the cells and cell aggregates during the course of the experiment. By drawing an analogy with the kinetic theory of gases, we have also introduced a procedure to normalize for variations in cell seeding density among different experiments. In addition, the image analysis technique has been improved by introducing a background subtraction algorithm to remove illumination defects and an adaptive segmentation procedure. These improvements allowed us to completely automate the image analysis procedure, thus minimizing user intervention and improving the reproducibility of the measurements. The enhanced visual assay is evaluated using some recent results from our studies on homotypic lymphocyte aggregation.

Non-NASA Center↗
NASA NTRS1986

Calculating Bearing Forces From Strain-Gage Signals

Technique for obtaining force components on cylindrical bearing holder uses pairs of opposing strain gages. Signals proportional to outputs of pairs of opposing gages subtracted from each other. Subtraction nearly eliminates crosstalk between orthogonal force components. Signal-processing technique equally applicable to rotating as well as stationary loads.

Fenwick, J. R.↗
NASA NTRS1979

Improvement of scanning radiometer performance by digital reference averaging

Most radiometers utilize a calibration technique in which measurements of a known reference are subtracted from measurements of an unknown source so that common-mode bias errors are cancelled. When a radiometer is scanned over a varying scene, it produces a sequence of outputs, each being proportional to the difference between the reference and the corresponding input. A reference averaging technique is presented that employs a simple digital algorithm which exploits the asymmetry between the time-variable scene inputs and the nominally constant reference input by averaging many reference measurements to decrease the statistical uncertainty in the reference value. This algorithm is, therefore, optimized by an asymmetric chopping sequence in which the scene is viewed for more than one-half of the duty cycle (unlike the analog Dicke technique). Reference averaging algorithms are well within the capabilities of small microprocessors. Although this paper develops the technique for microwave radiometry, it may be beneficial for any system which measures a large number of unknowns relative to a known reference in the presence of slowly varying common-mode errors.

Bremer, J. C.↗
NASA NTRSDate not supplied

Developing Methods for Exercise System Kinematics Tracking

BACKGROUND How to quantify the load and forces produced by exercise equipment and their Vibration Isolation and Stabilization (VIS) platforms in-flight is an active area of investigation. Kinematic tracking paired with system modeling can provide insights as well as verification and validation of simulations used for system design and development. Traditional motion capture methods can require significant cost in equipment procurement and crew-time, but newer lessons learned can be leveraged [1]. The VIS systems of current and future exercise hardware on the International Space Station (ISS) such as the Cycle Ergometer with Vibration Isolation System (CEVIS) and the European Enhanced Exploration Exercise Device (E4D) are not currently outfitted with IMUs or similar measurement devices. Video-based methods would enable use of multi-purpose, crew-familiar flight equipment. An initial exploration of video-based solutions was performed utilizing 2-camera video from crew cycling on Teal-CEVIS on the ISS. METHODS AND RESULTS Our group has scoped a variety of video-based object tracking methods. To date, we have primarily investigated computer vision toolkits such as openCV. Techniques explored include key-point detection, background subtraction, region-of interest tracking, color-based tracking, tag masking and tracking, and corner detection. Although object-tracking and 6D pose estimation is a rich field, space applications are a unique problem that are challenging for existing software and toolkits. The majority of the existing object-tracking applications involve vehicles/pedestrians and household objects with simple backgrounds. We have identified the following features which pose particular challenges for on-station exercise equipment tracking: Busy and visually cluttered background Low-textured tracking object with relatively small motions Occlusions and motion by human subject and loose, floating objects Limited number of video cameras with no fixed global references Limited ability to add tags, markers, or visual references to the tracking object Lack of training data for Machine Learning (ML) algorithms CONCLUSION We will summarize the efficacy of techniques tested for a ground mock-trial and the on-station exercise trial. It is likely that human-in-loop feedback or a conglomerate of methods is required. ML-based methods, like those implemented for human body tracking [2], may still be a viable option, but more training data and validation is needed.

L B Nilsson↗
NASA NTRSDate not supplied

Developing Methods for Exercise System Kinematic Tracking

BACKGROUND How to quantify the load and forces produced by exercise equipment and their Vibration Isolation and Stabilization (VIS) platforms in-flight is an active area of investigation. Kinematic tracking paired with system modeling can provide insights as well as verification and validation of simulations used for system design and development. Traditional motion capture methods can require significant cost in equipment procurement and crew-time, but newer lessons learned can be leveraged [1]. The VIS systems of current and future exercise hardware on the International Space Station (ISS) such as the Cycle Ergometer with Vibration Isolation System (CEVIS) and the European Enhanced Exploration Exercise Device (E4D) are not currently outfitted with IMUs or similar measurement devices. Video-based methods would enable use of multi-purpose, crew-familiar flight equipment. An initial exploration of video-based solutions was performed utilizing 2-camera video from crew cycling on Teal-CEVIS on the ISS. METHODS AND RESULTS Our group has scoped a variety of video-based object tracking methods. To date, we have primarily investigated computer vision toolkits such as open CV. Techniques explored include key-point detection, background subtraction, region-of interest tracking, color-based tracking, tag masking and tracking, and corner detection. Although object-tracking and 6D pose estimation is a rich field, space applications are a unique problem that are challenging for existing software and toolkits. The majority of the existing object-tracking applications involve vehicles/pedestrians and household objects with simple backgrounds. We have identified the following features which pose particular challenges for on-station exercise equipment tracking: 1. Busy and visually cluttered background 2. Low-textured tracking object with relatively small motions 3. Occlusions and motion by human subject and loose, floating objects 4. Limited number of video cameras with no fixed global references 5. Limited ability to add tags, markers, or visual references to the tracking object 6. Lack of training data for Machine Learning (ML) algorithms CONCLUSION We will summarize the efficacy of techniques tested for a ground mock-trial and the on-station exercise trial. It is likely that human-in-loop feedback or a conglomerate of methods is required. ML-based methods, like those implemented for human body tracking [2], may still be a viable option, but more training data and validation is needed.

L Nilsson↗
DOE OSTI2025

Novel Tools for Analyzing Life Cycle Energy Use, Carbon Emissions, and Cost of Additive Manufacturing

Decarbonizing industrial manufacturing is a significant challenge in the effort to limit the impacts of global climate change. Additive manufacturing (AM) is one pathway for reducing the impacts of manufacturing as it creates parts layer-by-layer rather than by removing (i.e., subtracting) material from solid stock as with conventional techniques. This reduces material inputs and generates less waste, which can substantially lower life cycle energy consumption and greenhouse gas emissions. However, AM adoption in the manufacturing sector has been slow, partly due to challenges in making a strong business case compared with more traditional and widely available techniques. This paper highlights the need for the development of simple screening analysis tools to speed the adoption of AM in the manufacturing sector by providing decision-makers easy access to important production life cycle emissions, and cost information. Details on the development of two Microsoft Excel software tools are provided: upgrades to an existing tool on the energy and carbon impacts of AM and a new tool for analyzing the major cost components of AM. A case study applies these two tools to the production of a lightweight aerospace bracket, showing how the tools can be used to estimate the environmental benefits and production costs of AM.

GHG emissions↗
NASA NTRS1972

Quantitative simultaneous multi-element microprobe analysis using combined wavelength and energy dispersive systems

A combined WDS-EDS system obviates the severe X-ray peak overlap problems encountered with Na, Mg, Al and Si common to pure EDS systems. By application of easily measured empirical correction factors for pulse pile-up and peak overlaps which are normally observed in the analysis of silicate minerals, the accuracy of analysis is comparable with that expected for WDS electron microprobe analyses. The continuum backgrounds are subtracted for the spectra by a spline fitting technique based on integrated intensities between the peaks. The preprocessed data are then reduced to chemical analyses by existing data reduction programs.

Walter, L. S.↗
NASA NTRS1974

Cost Modeling Techniques for Design Maturity

Cost modeling techniques and factors which either add to or subtract from these estimates are examined. The most important factors for increasing costs are interfacing subsystems, subsystem design and software maturity. Cost decrease depends on hardware, software, and support equipment availability. A cost modeling analysis for reentry shield and aerodynamic decelerator subsystems of a reentry vehicle is presented. Integration problems for the subsystems are also discussed.

Ruhland, E. W.↗
NASA NTRS1977

Faster optical-spectra recording and analysis

Optical spectra are recorded and rapidly analyzed by system that links multichannel analyzer and desk-top programable calculator. Cassette-memory storage is provided. System can be programed to automate background subtraction, axis expansion, and other data-analysis techniques and can store several hundred spectra for immediate or delayed analysis and comparisons.

Richmond, R. G.↗
NASA NTRS1993

The multicomponent structure of bulges

The morphology of disk galaxies is usually described by two major components, the centrally concentrated spheroidal component, called the bulge, and an oblate disk. The ratio of there contribution to the total luminosity - the bulge-to-disk ratio - is one of the parameters characterizing the Hubble sequence. Following de Vaucouleurs (1948), for most galaxies the radial distribution of the outer spheroid is fairly well described by the r exp 1/4 law I(r)=I(sub 0) exp(-(alpha)r), whereas the radial luminosity distribution of the disk follows an exponential law: I(r)=I(sub 0) exp(-alpha(r exp 1/4)) (Freeman 1970), with r the radial distance from the center. I(sub 0) and alpha are characteristic constants for each individual galaxy. Parameters for the structural properties of these components give important constraints for models of the formation and evolution of galaxies. Therefore we have tried to decompose disk and bulge components from high S/N CCD observations of a sample of edge-on disk galaxies. A common procedure for the decomposition is to model one component in a region where it dominates and subtract it from the combined light distribution. This technique was successfully carried out e.g. by van der Kruit & Earl (1981, 1982) and Wakamatsu & Hamabe (1984, 1989). Here we present two more examples of bulge-dominated edge-on SO galaxies, namely ESO 506-G33 and NGC 7123, which show an additional small and concentrated central component besides disk and 'bulge'.

Dettmar, Ralf-Juergen↗