Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sulfur Chlorides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Effects of environment on microhardness of magnesium oxide

Micro-Vickers hardness measurements of magnesium oxide single crystals were conducted in various environments. These environments included air, nitrogen gas, water, mineral oil with or without various additives, and aqueous solutions with various pH values. Indentations were made on the (100) plane with the diagonals of the indentation in the (100) direction. The results indicate that a sulfur containing additve in mineral oil increased hardness, a chlorine containing additive in mineral oil decreased hardness, and aqueous solutions of hydrogen chloride decreased hardness. Other environments were found to have little effect on hardness. Mechanically polished surfaces showed larger indentation creep than did as-cleaved surfaces.

Ishigaki, H.↗
DOE OSTI2022

Metal fluxes at the sediment–water interface in a free water surface constructed wetland

Metal biogeochemistry in the sediment, water, and the sediment–water interface (SWI) was studied in a free water surface constructed wetland. Concentrations of labile copper (Cu), zinc (Zn), sulfate, chloride, and dissolved organic carbon (DOC) were measured with the diffusive gradients in thin film (DGT) and peeper. A good agreement between peeper- and DGT-measured metals was observed for Cu (regression r 2 = 0.3, 95% CI of the slopes > 0), but not for Zn (95% CI of the slopes overlapped with 0), which was attributed to the different complexed compounds between Cu and Zn in porewater. The depth profile of labile metals in sediment porewater varied with time and was consistent with the solid-phase metal deposition, showing higher concentrations in the surface layer (3 to –3 cm) than in the bottom layer (–4 to –13 cm). The depth-averaged labile Cu and Zn concentrations measured by DGT were 1.0 and 3.1 µg/L, and labile sulfate, chloride, and DOC concentrations measured by peeper were 1.8, 3.6, and 2.1 mg/L, respectively. A sharp decrease in sulfate occurred in September when sulfate concentrations became the lowest among sampling months. This was caused by the seasonal sulfur cycles in the wetland, where the dominant sulfur reaction is sulfate reduction in warm seasons and sulfide oxidation in cold seasons. Different metal-removal mechanisms were observed in the two wetland cells; sulfur dynamics controlled the removal processes in the cell without frequent disturbance but failed to influence metal removal in the cell with frequent disturbance due to the interruption of anoxic layers. The flux ratios that compare labile element concentrations between the water column and the SWI (R-Cu, R-Zn, R-DOC, R-sulfate, and R-chloride) were generated to determine metal diffusive fluxes at the interface. Labile Zn was mostly transported from the water to the SWI during all seasons (R-Zn < 1 for all months except January). Labile Cu moved from the SWI to the water during the warm months (R-Cu < 1), which was explained by the bioturbation-induced transport of organic matter based on the positive correlations between R-Cu and R-DOC. In general, sediment can serve either as a sink or a source depending on the environmental conditions, metal speciation, and presence of living organisms. Here, metal flux at the SWI is a key component in the biogeochemical cycling of a constructed wetland.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Breakthrough Conductivity Enhancement in Deep Eutectic Solvents via Grotthuss–Type Proton Transport

There is an increasing demand for the development of ion-conducting electrolytes for energy storage systems. Much attention is directed toward deep eutectic solvents as potential candidates. In the search for highly conductive systems, the possibility of designing deep eutectic solvents with Grotthuss-type proton transport is widely overlooked. Herein, ethaline, a mixture of choline chloride and ethylene glycol is used in a 1:2 molar ratio, to induce a significant conductivity increase with the addition of water and sulfuric acid (H 2 SO 4 ). The achieved breakthrough conductivity is analyzed experimentally and simulated with ab initio molecular dynamics (AIMD). At sufficient water content, an H-bonding network is formed that leads to a significant breakthrough conductivity based on H 2 SO 4 -derived proton transfer following the long-established Grotthuss proton transport mechanism. This result is substantiated by the positive deviation from the ideal KCl line in the Walden plot. Specifically, the data series positioned above the reference line indicates a Grotthuss mechanism in action. The AIMD simulations demonstrate proton transfer between water and ethylene glycol, supported by simulation frames captured at various times.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Mercury Removal from Contaminated Water by Wood-Based Biochar Depends on Natural Organic Matter and Ionic Composition

Biochars can remove potentially toxic elements, such as inorganic mercury [Hg(II)] from contaminated waters. However, their performance in complex water matrices is rarely investigated, and the combined roles of natural organic matter (NOM) and ionic composition in the removal of Hg(II) by biochar remain unclear. Here, we investigate the influence of NOM and major ions such as chloride (Cl – ), nitrate (NO 3 – ), calcium (Ca 2+ ), and sodium (Na + ) on Hg(II) removal by a wood-based biochar (SWP700). Multiple sorption sites containing sulfur (S) were located within the porous SWP700. In the absence of NOM, Hg(II) removal was driven by these sites. Ca 2+ bridging was important in enhancing removal of negatively charged Hg(II)-chloro complexes. In the presence of NOM, formation of soluble Hg-NOM complexes (as seen from speciation calculations), which have limited access to biochar pores, suppressed Hg(II) removal, but Cl – and Ca 2+ could still facilitate it. The ability of Ca 2+ to aggregate NOM, including Hg-NOM complexes, promoted Hg(II) removal from the dissolved fraction (<0.45 μm). Hg(II) removal in the presence of Cl – followed a stepwise mechanism. Weakly bound oxygen functional groups in NOM were outcompeted by Cl – , forming smaller-sized Hg(II)-chloro complexes, which could access additional intraparticle sorption sites. Therein, Cl – was outcompeted by S, which finally immobilized Hg(II) in SWP700 as confirmed by extended X-ray absorption fine structure spectroscopy. We conclude that in NOM containing oxic waters, with relatively high molar ratios of Cl – : NOM and Ca 2+ : NOM, Hg(II) removal can still be effective with SWP700.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

A Spectroscopic Study of Mars-analog Materials with Amorphous Sulfate and Chloride Phases: Implications for Detecting Amorphous Materials on the Martian Surface

The Chemistry and Mineralogy X-ray diffraction (XRD) instrument aboard the Curiosity rover consistently identifies amorphous material at Gale Crater, which is compositionally variable, but often includes elevated sulfur and iron, suggesting that amorphous ferric sulfate (AFS) may be present. Understanding how desiccating ferric sulfate brines affect the spectra of Martian material analogs is necessary for interpreting complex/realistic reaction assemblages. Visible and near-infrared reflectance (VNIR), mid-infrared attenuated total reflectance (MIR, FTIR-ATR), and Raman spectra, along with XRD data are presented for basaltic glass, hematite, gypsum, nontronite, and magnesite, each at three grain sizes (<25, 25–63, and 63–180 μm), mixed with ferric sulfate (+/–NaCl), deliquesced, then rapidly desiccated in 11% relative humidity or via vacuum. All desiccated products are partially or completely XRD amorphous; crystalline phases include starting materials and trace precipitates, leaving the bulk of the ferric sulfate in the amorphous fraction. Due to considerable spectral masking, AFS detectability is highly dependent on spectroscopic technique and minerals present. This has strong implications for remote and in situ observations of Martian samples that include an amorphous component. AFS is only identifiable in VNIR spectra for magnesite, nontronite, and gypsum samples; hematite and basaltic glass samples appear similar to pure materials. Sulfate features dominate Raman spectra for nontronite and basaltic glass samples; the analog material dominates Raman spectra of hematite and gypsum samples. MIR data are least affected by masking, but basaltic glass is almost undetectable in MIR spectra of those mixtures. NaCl produces similar FTIR-ATR and Raman features, regardless of analog material.

58 GEOSCIENCES↗
NASA NTRS1978

Relative toxicity of materials in fire situations

The results of toxicity testing of additional materials is presented. Relative toxicity data on polymers by generic type are presented and include wood, polyurethane flexible foam, polyvinyl chloride (PVC), acrylonitrile/butadiene/styrene (ABS), and polyisoprene (natural rubber). A second table gives relative toxicity data on fibers and fabrics including wool, nylon, rayon, polyester, and aromatic polyamide. Sulfur-containing materials seemed to exhibit the shortest times to death of laboratory animals. Some chlorine-containing polymers tended to exhibit shortest time to death also while some halogen-containing polymers gave the shortest time to incapacitation. Among fibers and fabrics, wool, silk, and polyester exhibited the shortest times to incapacitation and times to death. Difficulty in restricting generally accepted materials is discussed and attention is given to other factors important in comparing materials, such as backcoatings and relative weights.

Hilado, C. J.↗
DOE OSTI2025

Conversion of Waste PET Plastic to Aramid Fiber

A three-step synthesis was used to convert waste polyethylene terephthalate (PET) into the high value polymer, poly-para-phenylene terephthalamide (PPTA), used in the production of high strength aramid fiber, such as Kevlar. Improvements to the polymerization reaction by addition of calcium chloride to the solvent, N-methyl-2-pyrrolidone (NMP), and rigorous anhydrous conditions enabled the production of a PET-derived PPTA with a 4.15 dL/g inherent viscosity in sulfuric acid that is amenable to fiber spinning. PPTA fibers were spun using a wet spinning apparatus under varied process parameters to assess their impact on fiber surface morphology, diameter, and the mechanical properties of the fibers. Select fibers were subjected to a post-spinning heat treatment at 150 °C , which improved the tensile strength and modulus by 100% and 30%, respectively, relative to the as-spun fibers. Techno-economic and life cycle analyses were conducted to evaluate the economic feasibility and the life-cycle greenhouse gases (GHG) emissions of the approach. In conclusion, the results suggest the potential for up to a 30% cost reduction, and comparable GHG emissions against conventional petroleum-based processes.

Lifecycle Analysis↗
DOE OSTI2024

The phototrophic purple non‐sulfur bacteria Rhodomicrobium spp. are novel chassis for bioplastic production

Abstract Petroleum‐based plastics levy significant environmental and economic costs that can be alleviated with sustainably sourced, biodegradable, and bio‐based polymers such as polyhydroxyalkanoates (PHAs). However, industrial‐scale production of PHAs faces barriers stemming from insufficient product yields and high costs. To address these challenges, we must look beyond the current suite of microbes for PHA production and investigate non‐model organisms with versatile metabolisms. In that vein, we assessed PHA production by the photosynthetic purple non‐sulfur bacteria (PNSB) Rhodomicrobium vannielii and Rhodomicrobium udaipurense. We show that both species accumulate PHA across photo‐heterotrophic, photo‐hydrogenotrophic, photo‐ferrotrophic, and photo‐electrotrophic growth conditions, with either ammonium chloride (NH 4 Cl) or dinitrogen gas (N 2 ) as nitrogen sources. Our data indicate that nitrogen source plays a significant role in dictating PHA synthesis, with N 2 fixation promoting PHA production during photoheterotrophy and photoelectrotrophy but inhibiting production during photohydrogenotrophy and photoferrotrophy. We observed the highest PHA titres (up to 44.08 mg/L, or 43.61% cell dry weight) when cells were grown photoheterotrophically on sodium butyrate with N 2 , while production was at its lowest during photoelectrotrophy (as low as 0.04 mg/L, or 0.16% cell dry weight). We also find that photohydrogenotrophically grown cells supplemented with NH 4 Cl exhibit the highest electron yields – up to 58.89% – while photoheterotrophy demonstrated the lowest (0.27%–1.39%). Finally, we highlight superior electron conversion and PHA production compared to a related PNSB, Rhodopseudomonas palustris TIE‐1. This study illustrates the value of studying non‐model organisms like Rhodomicrobium for sustainable PHA production and indicates future directions for exploring PNSB metabolisms.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1982

Influence of mineral oil and additives on microhardness and surface chemistry of magnesium oxide (001) surface

X-ray photoelectron spectroscopy analyses and hardness experiments were conducted with cleaved magnesium oxide /001/ surfaces. The magnesium oxide bulk crystals were cleaved into specimens along the /001/ surface, and indentations were made on the cleaved surface in laboratory air, in nitrogen gas, or in degassed mineral oil with and without an additive while not exposing specimen surface to any other environment. The various additives examined contained sulfur, phosphorus, chlorine, or oleic acid. The sulfur-containing additive exhibited the highest hardness and smallest dislocation patterns evidencing plastic deformation; the chlorine-containing additive exhibited the lowest hardness and largest dislocation patterns evidencing plastic deformation. Hydrocarbon and chloride (MgCl2) films formed on the magnesium oxide surface. A chloride film was responsible for the lowest measured hardness.

Miyoshi, K.↗
NASA NTRS1977

Evaluation of a hydrogen chloride detector for environmental monitoring

The paper describes a hydrogen chloride detector designed to monitor concentrations of hydrogen chloride gas in the ambient environment. The detector was developed for NASA for use in launch vehicle effluent monitoring. The detector operates on chemiluminescence principles with a lower detection limit of less than 5 x 10 to the -3rd ppm (by volume). The hydrogen chloride in the air sample reacts with a bromide-bromate coating in the inlet tube of the instrument producing bromine. Bromine is then quantitated by chemiluminescent oxidation of luminol. The visible light generated in the chemiluminescent reaction is proportional to the hydrogen chloride concentration of the sampled airstream. The detector is most suited to laboratory or field studies where hydrogen chloride is the dominant pollutant, as compared to the interfering species. Interferences include strong acids, acid-forming gases, and halogen gases. Of the interferences investigated the most serious in these groups are hydrochloric and sulfuric acid, sulfur dioxide, and chlorine, respectively. The detector has been in use since 1974 and has been found to be highly portable, rugged, and stable under extreme environmental conditions.

Gregory, G. L.↗
NASA NTRS2009

Emissions from Biomass Burning in the Yucatan

In March 2006 two instrumented aircraft made the first detailed field measurements of biomass burning (BB) emissions in the Northern Hemisphere tropics as part of the MILAGRO project. The aircraft were the National Center for Atmospheric Research C-130 and a University of Montana/US Forest Service Twin Otter. The initial emissions of up to 49 trace gas or particle species were measured from 20 deforestation and crop residue fires on the Yucatan peninsula. This included two trace gases useful as indicaters of BB (HCN and acetonitrile) and several rarely, or never before, measured species: OH, peroxyacetic acid, propanoic acid, hydrogen peroxide, methane sulfonic acid, and sulfuric acid. Crop residue fires emitted more organic acids and ammonia than deforestation fires, but the emissions from the main fire types were otherwise fairly similar. The Yucatan fires emitted unusually amounts of SO2 and particle chloride, likely due to a strong marine influence on the peninsula.

Yokelson, R.↗
NASA NTRS1996

Long Life Na/NiCl2 Cells

The premature capacity failure of Na/NiCl2 secondary cells due to agglomeration of nickel particles on the surface of the NiCl2 cathode is prevented by addition of a minor amount such as 10 percent by weight of a transition metal such as Co, Fe or Mn to the cathode. The chlorides of the transition metals have lower potentials than nickel chloride and chlorinate during charge. A uniform dispersion of the transition metals in the cathodes prevents agglomeration of nickel, maintains morphology of the electrode, maintains the electrochemical area of the electrode and thus maintains capacity of the electrode. The additives do not effect sintering. The addition of sulfur to the liquid catholyte is expected to further reduce agglomeration of nickel in the cathode.

Bugga, Ratnakumar V.↗
DOE OSTI2023

Photoelectrochemical and Photovoltaic Performance of As-deposited Ink-based CuInS 2 Heterojunction Thin Film

In this report, we demonstrate low-temperature ink-based fabrication of CuInS 2 -based photoelectrodes for hydrogen production capable of producing photocurrent densities as high as 8.8mA.cm -2 . In this process, molecular ink made of metal chlorides and thiourea dissolved in methanol was spin coated onto Mo-coated soda lime glass substrates. Samples were then placed on a hot plate (sample surface temperature: 250°C) to induce CuInS 2 formation and remove the solvent and by-products. No further processing, such as high temperature sulfurization, was performed. Further, the CuInS 2 films were then integrated as photocathode for hydrogen evolution by photoelectrodeposition of Pt nanoparticles. Photocurrent density of 0.4mA.cm -2 at 0V vs. RHE was detected from such electrodes. However, samples coated with CdS/ZnO/ITO overlayers forming heterojunction prior to Pt deposition exhibited significant improvement of the photocurrent density, reaching 8.8mA.cm -2 at 0V vs. RHE, highlighting the improved charge transfer by the p-n junction formed at the CuInS 2 /CdS interface. The charge transfer resistance of the CuInS 2 /CdS/ZnO/ITO-Pt photoelectrode was almost 5 times lower than that of the CuInS 2 -Pt photoelectrode as revealed by electrochemical impedance spectroscopy analysis. In addition, the onset potential was shifted by ca. 0.45V toward the anodic direction, reaching 0.75V vs. RHE. Solar cell made of identical structure (Mo/CuInS 2 /CdS/ZnO/ITO) showed power conversion efficiency of 2.1% with short-circuit photocurrent density and open circuit voltage of 7.4mA.cm -2 and 820mV, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1991

NASA Li/CF(x) cell problem analysis: Scanning electron microscopy with energy dispersive x ray spectrometry

An analysis was made of Lithium/carbon fluoride cell parts for possible chloride contamination induced by exposure to thionyl chloride (SOCl2); various samples were submitted for analysis. Only a portion of the analysis which has been conducted is covered, herein, namely analysis by scanning electron microscopy with energy dispersive x ray spectrometry (SEM/EDS). A strip of nickel was exposed to SOCl2 vapors to observe variations in surface concentrations of sulfur and chlorine with time. By detecting chlorine one can not infer contamination by SOCl2 only that contamination is present. Six samples of stainless steel foil were analyzed for chlorine using EDS. Chlorine was not detected on background samples but was detected on the samples which had been handled including those which had been cleaned. Cell covers suspected of being contaminated while in storage and covers which were not exposed to the same storage conditions were analyzed for chlorine. Although no chlorine was found on the covers from cells, it was found on all stored covers. Results are presented with techniques shown for analysis and identification. Relevant photomicrographs are presented.

Baker, John↗
NASA NTRS1997

AB Initio Study of the Structure and Spectroscopic Properties of Halogenated Thioperoxy Radicals

Thioperoxy (XSO or XOS) radicals exist in a variety of chemical environments, and they have as a consequence drawn some interest. HSO, an important species in the chemistry of the troposphere, has been examined both experimentally. The halogenated (X = F, Cl or Br) peroxy species and isovalent thioperoxy species have been studied less, but they too are potentially interesting because oxidized sulfur species and halogen sources are present in the atmosphere. Learning the fate of XSO and XOS radicals is important to understanding the atmospheric oxidation chemistry of sulfur compounds. Of these, FSO and ClSO are particularly interesting because they have been directly detected spectroscopically. Recent studies in our laboratory on the photochemistry of thionyl halides (X2SO; where X = F or Cl) have suggested new ways to generate XSO species. The laser-induced photodissociation of thionyl fluoride, F2SO, at 193 nm and thionyl chloride, ClSO, at 248 nm is characterized by a radical mechanism, X2SO -> XSO + X. The structure of FSO has been characterized experimentally by Endo et cd. employing microwave spectroscopy. Using the unrestricted Hartree-Fock (UHF) self-consistent field (SCF) method, Sakai and Morokuma computed the electronic structure of the ground (sup 2)A" and the first excited (sup 2)A' states of FSO. Electron correlation was not taken into account in their study. In a laser photodissociation experiment, Huber et al. identified ClSO mass spectromctrically. ClSO has also been detected in low temperature matrices by EPR and in the gas phase by far IR laser magnetic resonance. Although the structure of FSO is known in detail, the only study, experimental or theoretical, of CISO has been an ab initio HFSCF study by Hinchliffe. Electron correlation corrections were also excluded from this study. In order to better understand the isomerization and dissociation dynamics of the radical species, we have performed ab initio correlated studies of the potential energy surfaces (PES) of ClSO and its isomer ClOS at the QCISD(T)/6-31 G* level of theory. For FSO and FOS, more extensive QCISD/6-31 1G(2df) calculations have been possible, and the results are summarized here.

Munoz, Luis A.↗
NASA NTRS1989

Advanced rechargeable sodium batteries with novel cathodes

Various high energy density rechargeable batteries are being considered for future space applications. Of these, the sodium sulfur battery is one of the leading candidates. The primary advantage is the high energy density (760 Wh/kg theoretical). Energy densities in excess of 180 Wh/kg have been realized in practical batteries. More recently, cathodes other than sulfur are being evaluated. Researchers at JPL are evaluating various new cathode materials for use in high energy density sodium batteries for advanced space applications. The approach is to carry out basic electrochemical studies of these materials in a sodium cell configuration in order to understand their fundamental behaviors. Thus far studies have focused on alternate metal chlorides such as CuCl2 and organic cathode materials such as tetracyanoethylene (TCNE).

Distefano, S.↗
NASA NTRS1990

Advanced rechargeable sodium batteries with novel cathodes

Various high energy density rechargeable batteries are being considered for future space applications. Of these, the sodium-sulfur battery is one of the leading candidates. The primary advantage is the high energy density (760 W h/kg theoretical). Energy densities in excess of 180 W h/kg have been realized in practical batteries. More recently, cathodes other than sulfur are being evaluated. Various new cathode materials are presently being evaluated for use in high energy density sodium batteries for advanced space applications. The approach is to carry out basic electrochemical studies of these materials in a sodium cell configuration in order to understand their fundamental behaviors. Thus far, the studies have focussed on alternative metal chlorides such as CuCl2 and organic cathode materials such as TCNE.

Di Stefano, S.↗
DOE OSTI2021

Hemicellulose and starch citrate chitosan foam adsorbents for removal of arsenic and other heavy metals from contaminated water

Arsenic and other heavy metal contaminants in water are a significant global health threat. In this study, low-cost, sulfur-free, sustainable, water-insoluble materials with heavy metal remediation properties were produced from renewable resources such as starch, xylan, citric acid, and chitosan. Synthesized starch citrate-chitosan (SCC) foam and xylan citrate-chitosan (XCC) foam were flexible, porous, and elastic. The foams’ arsenic uptake in water was significantly greater than five different commercial metal remediating agents. The mercury and lead uptakes with the synthesized foams were similar to the performance of a commercial sulfur-based product, SorbaTech 450 (ST450). However, the cadmium and selenium uptakes were comparatively lower. The complexation of arsenic with oxygen and nitrogen of the SCC foam was shown with time-of-flight secondary ion mass spectrometry (TOF-SIMS). The XCC foam was also shown to adsorb potassium iodide (KI) at a similar rate to sodium chloride. This may be used to remediate water contaminated with radioactive materials, such as iodine 131.

Materials Science↗