Search NASA⌕ Search

SEARCH · Search NASA

Results for “Supramolecular polymers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Supramolecular Control of Ionic Retention in Electrolyte-Gated Synaptic Transistors

Electrolyte-gated transistors with ion-trapping layers offer a promising platform for artificial synapses in neuromorphic computing, yet molecular mechanisms governing ionic retention remain poorly understood. Here, in this study, we present a supramolecular approach to modulate ion retention by incorporating a crown ether derivative-based polymer network as an ion-trapping layer on top of a semiconducting monolayer. We show that the balance between ion–host binding and ion–solvent interactions dictates the kinetics of ion capture and release, which in turn controls the memory characteristics of the device. By varying the solvent dielectric constant, we tune the ionic retention time from nearly permanent trapping to rapid relaxation. Intermediate solvent polarity enables programmable short- and long-term synaptic behaviors, including excitatory postsynaptic current, paired-pulse facilitation, and long-term potentiation and depression. These findings establish a direct link between supramolecular ion recognition and synaptic plasticity and provide a generalizable design strategy for ionic–electronic neuromorphic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Single-Crystal Polycationic Polymers Obtained by Single-Crystal-to-Single-Crystal Photopolymerization

The efficient preparation of single-crystalline ionic polymers and fundamental understanding of their structure–property relationships at the molecular level remains a challenge in chemistry and materials science. Herein, we observe the single-crystal structure of a highly ordered polycationic polymer (polyelectrolyte) and its proton conductivity. The polyelectrolyte single crystals can be prepared on a gram-scale in quantitative yield, by taking advantage of an ultraviolet/sunlight-induced topochemical polymerization, from a tricationic monomer—a self-complementary building block possessing a preorganized conformation. A single-crystal-to-single-crystal photopolymerization was revealed unambiguously by in situ single-crystal X-ray diffraction analysis, which was also employed to follow the progression of molecular structure from the monomer, to a partially polymerized intermediate, and, finally, to the polymer itself. Collinear polymer chains are held together tightly by multiple Coulombic interactions involving counterions to form two-dimensional lamellar sheets (1 nm in height) with sub-nanometer pores (5 Å). The polymer is extremely stable under 254 nm light irradiation and high temperature (above 500 K). The extraordinary mechanical strength and environmental stability—in combination with its impressive proton conductivity (~3 × 10 –4 S cm –1 )—endow the polymer with potential applications as a robust proton-conducting material. By marrying supramolecular chemistry with macromolecular science, the outcome represents a major step toward the controlled synthesis of single-crystalline polyelectrolyte materials with perfect tacticity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

N -Terminal Octylated Peptoid Hydrogels as 3D-Printable Cell Scaffolds and Proteolytically Robust Cargo Depots

Supramolecular hydrogels that mimic the extracellular matrix (ECM) represent promising materials for tissue engineering and drug delivery. However, conventional hydrogels formed via the self-assembly of natural or synthetic building blocks often face a trade-off between biological functionality and biochemical stability, limiting their utility in long-term or protease-rich environments. Peptoids, a class of peptide-inspired, sequence-defined polymers, offer a compelling alternative due to their exceptional proteolytic resistance and bioactivity. Despite this potential, the development of supramolecular peptoid hydrogels has been hindered by the absence of backbone hydrogen bond donors, which limits long-range ordering necessary for efficient hydrogel formation. This work describes a short peptoid functionalized at the N-terminus with an octyl chain that readily self-assembles into hydrogels. Hydrophobic interactions among pendant octyl groups promote directional peptoid packing into highly ordered nanosheets, which interconnect to form a porous hydrogel network. These hydrogels exhibit tunable viscoelasticity, shear-thinning, and self-healing properties, enabling their use as inks for extrusion-based 3D printing. They support NIH-3T3 fibroblast adhesion, spreading, and proliferation, maintaining greater than 95% cell viability over 4 days. Moreover, the hydrogels retain their macroscopic integrity under protease-rich conditions, enabling sustained cargo release and uniform cellular uptake. Together, this study demonstrates a class of supramolecular peptoid hydrogelators that integrate biocompatibility, 3D printability, and proteolytic stability, providing a versatile platform for ECMmimetic scaffolds in regenerative medicine and long-term therapeutic delivery.

cargo delivery↗
DOE OSTI2019

Carbon nanotube-based mixed-matrix membranes with supramolecularly engineered interface for enhanced gas separation performance

Here in this study, novel nanocomposite membranes were fabricated from single-walled carbon nanotubes (SWNTs) and a triptycene-containing polyimide. The desirable interfacial morphology and homogenous dispersion of SWNTs were achieved by strong π-π stacking and supramolecular shape-fitting interactions between the nanotube and the paddlewheel-shaped triptycene moieties in polymer matrix. Mixed-matrix membranes (MMMs) containing 2–15 wt% of as-purchased SWNTs (AP-SWNTs) were prepared and tested for their gas transport properties. While all MMMs showed greatly enhanced permeabilities with well-maintained selectivities, a non-linear dependence of permeability on filler content was observed. Another series of MMMs with purified SWNTs (P-SWNTs) and acid-treated SWNT (A-SWNTs) were also prepared. The functionalized A-SWNT MMM exhibited the best separation performance at 2 wt% filler content among all MMMs, which can be attributed to the improved interfacial affinity with carboxylic acid functionalized surface of A-SWNTs.

42 ENGINEERING↗
DOE OSTI2025

Robust Polymer Electrolytes For Flexible Energy Storage (CRADA Final Report)

As part of the Cyclotron Road program, Anthro Energy investigated the formulation, synthesis, and application of advanced supramolecular compounds for lithium-ion batteries. Anthro Energy developed and tested formulations and chemistries to create polymeric materials with improved mechanical strength, safety, and electrochemical performance. These materials were explored for use in next-generation batteries with a variety of form factors. Initially, Anthro Energy tested these materials to create flexible and deformable batteries, which are in high demand for the wearable/flexible electronics industry. In future work, Anthro Energy’s materials may be applied to create rigid structural batteries, or to enable novel chemistries such as silicon anodes or lithium metal anodes. In the process of testing the company’s unique lithium-ion cells, Anthro Energy explored the development and utilization of novel cell components, cell architectures, and testing protocols. These next-generation flexible and structural batteries may eventually enable new categories of electronic devices.

25 ENERGY STORAGE↗
DOE OSTI2023

Temporally Stable Supramolecular Polymeric Salts Enabling High-Performance 3D All-Aromatic Polyimide Lattices

Vat photopolymerization (VP) Additive Manufacturing (AM), in which UV light is selectively applied to cure photo-active polymers into complex geometries with micron-scale resolution, has a limited selection of aliphatic thermoset materials that exhibit relatively poor thermal performance. Ring-opening dianhydrides with acrylate-containing nucleophiles yielded diacrylate ester-dicarboxylic acids that enabled photo-active polyimide (PI) precursors, termed polysalts, upon neutralization with an aromatic diamine in solution. In situ FTIR spectroscopy coupled with a solution and photo-rheological measurements revealed a previously unknown time-dependent instability of 4,4'-oxydianiline (ODA) polysalts due to an aza-Michael addition. Replacement of the electron-donating ether-containing diamine with an electron withdrawing sulfone-containing monomer, e.g., 4,4'-diaminodiphenyl sulfone (DDS), prohibited the aza-Michael addition of the aromatic amine to the activated acrylate double bond. Novel DDS polysalt photocurable solutions are similarly analyzed and validated long-term stability, which enabled reproducible printing of polyimide organogel intermediates. Subsequent VP AM afforded 3-dimensional (3D) structures of intricate complexity and excellent surface finish, as demonstrated with scanning electron microscopy. In addition, the novel PMDA-HEA/DDS solution enabled the production of the first beam latticed architecture comprised of all-aromatic polyimide. Finally, the versatility of a polysalt platform for multi-material printing is further demonstrated by printing parts with alternating polysalt compositions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Constructing Crown Ether-Based Supramolecular Adhesives with Ambient-Temperature Applicable and Durable Adhesion

Supramolecular adhesives are attracting considerable attentions owing to their dynamic and reversible bonding, while the complex curing conditions and poor performance under extreme conditions severely restrict their applicability. Herein, a series of tetra-crown ether-terminated polyethylene glycol (TCE-PEG) adhesives are presented in which plenty of supramolecular interactions, including Van der Waals, hydrogen bonding, π–π staking, metal coordination, and electrostatic ones, provide strong adhesion on multiple types of substrates. Highly relevant for practical applications, ultra-strong adhesivity of TCE-PEG can be achieved without requiring additional ultraviolet radiation, heat, or chemical treatment at ambient temperature. It also exhibits durable adhesive behavior, excellent underwater stability, and low-temperature tolerance. Especially, by incorporating ionic polymer fragments of polyethyleneimine hydrochloride, additional hydrogen bonding between secondary amines and crown ether rings can be induced to enhance the lap-shear strength to 7.21 MPa due to the formation of supramolecular cross-linked network. Finally, this work pioneers a rather unique supramolecular approach for easily formed, ultra-strong crown-ether-based adhesives bearing great potential for applications in critical environments of limited heat source and unallowed solvent usage.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of Polyphenylsulfone and Polysulfone Incompatibility on the Structure and Performance of Blend Membranes for Ultrafiltration

This study deals with the modification of polyphenylsulfone ultrafiltration membranes by introduction of an incompatible polymer polysulfone to the polyphenylsulfone casting solution to improve the permeability. The correlation between properties of the blend polyphenylsulfone/polysulfone solutions and porous anisotropic membranes for ultrafiltration prepared from these solutions was revealed. The blend polyphenylsulfone/polysulfone solutions were investigated using a turbidity spectrum method, optical microscopy and measurements of dynamic viscosity and turbidity. The structure of the prepared blend flat sheet membranes was studied using scanning electron microscopy. Membrane separation performance was investigated in the process of ultrafiltration of human serum albumin buffered solutions. It was found that with the introduction of polysulfone to the polyphenylsulfone casting solution in N-methyl-2-pyrrolidone the size of supramolecular particles significantly increases with the maximum at (40–60):(60:40) polyphenylsulfone:polysulfone blend ratio from 76 nm to 196–354 nm. It was shown that polyphenylsulfone/polysulfone blend solutions, unlike the solutions of pristine polymers, are two-phase systems (emulsions) with the maximum droplet size and highest degree of polydispersity at polyphenylsulfone/polysulfone blend ratios (30–60):(70–40). Pure water flux of the blend membranes passes through a maximum in the region of the most heterogeneous structure of the casting solution, which is associated with the imposition of a polymer-polymer phase separation on the non-solvent induced phase separation upon membrane preparation. The application of polyphenylsulfone/polysulfone blends as membrane-forming polymers and polyethylene glycol (Mn = 400 g·mol -1 ) as a pore-forming agent to the casting solutions yields the formation of ultrafiltration membranes with high membrane pure water flux (270 L·m -2 ·h -1 at 0.1MPa) and human serum albumin rejection of 85%.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Orbital Angular Momentum from Self‐Assembled Concentric Nanoparticle Rings

Abstract Ring‐shaped nanostructures can focus, filter, and manipulate electromagnetic waves, but are challenging to incorporate into devices using standard nanofabrication techniques. Directed self‐assembly (DSA) of block copolymers (BCPs) on lithographically patterned templates has successfully been used to fabricate concentric rings and spirals as etching masks. However, this method is limited by BCP phase behavior and material selection. Here, a straightforward approach to generate ring‐shaped nanoparticle assemblies in thin films of supramolecular nanocomposites is demonstrated. DSA is used to guide the formation of concentric rings with radii spanning 150–1150 nm and ring widths spanning 30–60 nm. When plasmonic nanoparticles are used, ring nanodevice arrays can be fabricated in one step, and the completed devices produce high‐quality orbital angular momentum (OAM). Nanocomposite DSA simplifies and streamlines nanofabrication by producing metal structures without etching or deposition steps; it also introduces interparticle coupling as a new design axis. Detailed analysis of the nanoparticle ring assemblies confirms that the supramolecular system self‐regulates the spatial distribution of its components, and thus exhibits a degree of flexibility absent in DSA of BCPs alone, where structures are determined by polymer‐pattern incommensurability. The present studies also provide guidelines for developing self‐regulating DSA as an alternative to incommensurability‐driven methods.

Vargo, Emma↗
DOE OSTI2020

Designing Imidazolium Poly(amide-amide) and Poly(amide-imide) Ionenes and Their Interactions with Mono- and Tris(imidazolium) Ionic Liquids

Here we introduce the synthesis and thermal properties of a series of sophisticated imidazolium ionenes with alternating amide-amide or amide-imide backbone functionality, and investigate the structural effects of mono(imidazolium) and unprecedented tris(imidazolium) ionic liquids (ILs) in these ionenes. The new set of poly(amide-amide) (PAA) and poly(amide-imide) (PAI) ionenes represent the intersection of conventional high-performance polymers with the ionene archetype–presenting polymers with alternating functional and ionic elements precisely sequenced along the backbone. The effects of polymer composition on the thermal properties and morphology were analyzed. Five distinct polymer backbones were synthesized and combined with a stoichiometric equivalent of the IL 1-benzyl-3-methylimidazolium bistriflimide ([Bnmim][Tf 2 N]), which were studied to probe the self-assembly, structuring, and contributions of intermolecular forces when IL is added. Furthermore, three polyamide (PA) or polyimide (PI) ionenes with simpler xylyl linkages were interfaced with [Bnmim][Tf 2 N] as well as a novel amide-linked tris(imidazolium) IL, to demonstrate the structural changes imparted by the inclusion of functional, ionic additives dispersed within the ionene matrix. This work highlights the possibilities for utilizing concepts from small molecules which exhibit supramolecular self-assembly to guide creative design and manipulate the structuring of ionenes.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Rheological dynamics and structural characteristics of supramolecular assemblies of β-cyclodextrin and sulfonic surfactants

Cyclodextrins are highly functional compounds with a hydrophobic cavity capable of forming supramolecular inclusion complexes with various classes of molecules including surfactants. The resultant rich nanostructures and their dynamics are an interesting research problem in the area of soft condensed matter and related applications. In this paper, we report novel dynamical supramolecular assemblies based on the complexation of β-cyclodextrin with 3 different sulfonic surfactants, which are sodium hexadecylsulfate, sodium dodecylbenzenesulfonate, and myristyl sulfobetaine. It was observed that a β-cyclodextrin : surfactant/2 : 1 molar ratio was ideal for inducing axial growth and imparting large viscosities in the suspensions. Such complexation processes were accompanied by intriguing nanostructural phase behaviors and rheological properties that were very sensitive to the molecular architecture of sulfonic surfactants. The presence of an amino group in the head group of the surfactant allowed for large viscosities that reached 2.4 × 10 4 Pa s which exhibited gel-like behavior. In contrast, smaller viscosity values with a lower consistency index were observed when a bulky aromatic ring was present instead. DIC microscopy was used to visually probe the microstructure of the systems with respect to sulfonate molecular architecture. Additionally, surface tension measurements, and FTIR and NMR spectroscopies were used to gain insights into the nature of interactions that lead to the complexation and nanostructural characteristics. Finally, mechanics correlating the supramolecular morphologies to the rheological properties were proposed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Supramolecular assembly of polycation/mRNA nanoparticles and in vivo monocyte programming

Size-dependent phagocytosis is a well-characterized phenomenon in monocytes and macrophages. However, this size effect for preferential gene delivery to these important cell targets has not been fully exploited because commonly adopted stabilization methods for electrostatically complexed nucleic acid nanoparticles, such as PEGylation and charge repulsion, typically arrest the vehicle size below 200 nm. Here, we bridge the technical gap in scalable synthesis of larger submicron gene delivery vehicles by electrostatic self-assembly of charged nanoparticles, facilitated by a polymer structurally designed to modulate internanoparticle Coulombic and van der Waals forces. Specifically, our strategy permits controlled assembly of small poly(β-amino ester)/messenger ribonucleic acid (mRNA) nanoparticles into particles with a size that is kinetically tunable between 200 and 1,000 nm with high colloidal stability in physiological media. We found that assembled particles with an average size of 400 nm safely and most efficiently transfect monocytes following intravenous administration and mediate their differentiation into macrophages in the periphery. When a CpG adjuvant is co-loaded into the particles with an antigen mRNA, the monocytes differentiate into inflammatory dendritic cells and prime adaptive anticancer immunity in the tumor-draining lymph node. This platform technology offers a unique ligand-independent, particle-size-mediated strategy for preferential mRNA delivery and enables therapeutic paradigmsviamonocyte programming.

Science & Technology - Other Topics↗
DOE OSTI2025

Abbr. Final report: Self-assembled molecular containers as artificial water channels: towards biomimetic desalination membranes

Global water scarcity demands advances in desalination technologies that can deliver more fresh water with less energy. Current reverse osmosis membranes are fundamentally limited by a trade-off between how much water they can pass and how well they block salts. To address this challenge, we developed a bottom-up strategy to design and test artificial water channels that mimic the efficiency of biological proteins but are built from robust synthetic molecules. Over two years, we synthesized and evaluated more than twenty molecular channel candidates, including supramolecular macrocycles and nanographene pores with atomically precise structures. We showed that small chemical modifications allow direct control over pore size and chemistry, which in turn govern water permeability and salt rejection. In collaboration with university partners, we reported the first experimental demonstration of water transport through a nanographene pore, bridging a long-standing gap between simulation and experiment. Several of the artificial channels we developed achieved water–salt selectivity beyond conventional polymer membranes, highlighting their potential for next-generation desalination and precision separations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Dynamic, hollow nanotubular networks with superadjustable pH-responsive and temperature resistant rheological characteristics

Recently, the interest in stimuli-responsive and adaptable materials has continuously grown in various fields and applications. For such responsive systems, different triggers, including pH, light, pressure, temperature, and electric field, have been utilized to control dynamics and assembly. Among these, pH is one of the most convenient, energy-efficient, and economic modalities. Besides, plenty of traditional materials have poor thermal and salt stability, limiting their applications. Herein, we report a new design of a pH-responsive viscoelastic supramolecular complex (VSC) based on commplexation of a new long-chain amino-amide and maleic acid. In this study, the system demonstrated a sol–gel-sol transition from pH 2 to 10, with the largest static viscosity occurring at pH 6 (~1000 Pa·s) and the smallest viscosity at pH 4 (~3.3 Pa·s), indicating ~ 300-fold control over the viscosity. For a given concentration, the static viscosity of VSC was about 15 times larger than that of CTAB/NaSal, a well-established dynamic viscoelastic system, and no pH-responsiveness was observed for the traditional system. In addition, the VSC demonstrated a superior temperature tolerance and lower temperature dependence. The potential of these intriguing dynamics viscoelastic systems was evaluated for hydraulic fracturing and enhanced oil recovery applications. Proppant settling velocity of DMAA/MA was 500 ~ 1000 times lower than that of CTAB/NaSal and common traditional polymers. Likewise, the oil recovery percentage could be significantly improved with the utilization of DMAA/MA compared to the CTAB/NaSal (86 % vs 52 %). Aside from applications in hydraulic fracturing and enhanced oil recovery, we anticipate that the intriguing rheological properties of this viscoelastic system can be beneficial for other chemical engineering applications including personal care products, cosmetics, lubricants, and biomedical gels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Modulating the Molecular Geometry and Solution Self-Assembly of Amphiphilic Polypeptoid Block Copolymers by Side Chain Branching Pattern

Solution self-assembly of coil-crystalline diblock copolypeptoids has attracted increasing attention due to its capability to form hierarchical nanostructures with tailorable morphologies and functionalities. While the N-substituent (or side chain) structures are known to affect the crystallization of polypeptoids, their roles in dictating the hierarchical solution self-assembly of diblock copolypeptoids are not fully understood. Herein, we designed and synthesized two types of diblock copolypeptoids, i.e., poly(N-methylglycine)-b-poly(N-octylglycine) (PNMG-b-PNOG) and poly(N-methylglycine)-b-poly(N-2-ethyl-1-hexylglycine) (PNMG-b-PNEHG), to investigate the influence of N-substituent structure on the crystalline packing and hierarchical self-assembly of diblock copolypeptoids in methanol. With a linear aliphatic N-substituent, the PNOG blocks pack into a highly ordered crystalline structure with a board-like molecular geometry, resulting in the self-assembly of PNMG-b-PNOG molecules into a hierarchical microflower morphology composed of radially arranged nanoribbon subunits. By contrast, the PNEHG blocks bearing bulky branched aliphatic N-substituents are rod-like and prefer to stack into a columnar hexagonal liquid crystalline mesophase, which drives PNMG-b-PNEHG molecules to self-assemble into symmetrical hexagonal nanosheets in solution. A combination of time-dependent small/wide-angle X-ray scattering and microscopic imaging analysis further revealed the self-assembly mechanisms for the formation of these microflowers and hexagonal nanosheets. These results highlight the significant impact of the N-substituent architecture (i.e., linear versus branched) on the supramolecular self-assembly of diblock copolypeptoids in solution, which can serve as an effective strategy to tune the geometry and hierarchical structure of polypeptoid-based nanomaterials.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2024

Assembly of short amphiphilic peptoids into nanohelices with controllable supramolecular chirality

Abstract A long-standing challenge in bioinspired materials is to design and synthesize synthetic materials that mimic the sophisticated structures and functions of natural biomaterials, such as helical protein assemblies that are important in biological systems. Herein, we report the formation of a series of nanohelices from a type of well-developed protein-mimetics called peptoids. We demonstrate that nanohelix structures and supramolecular chirality can be well-controlled through the side-chain chemistry. Specifically, the ionic effects on peptoids from varying the polar side-chain groups result in the formation of either single helical fiber or hierarchically stacked helical bundles. We also demonstrate that the supramolecular chirality of assembled peptoid helices can be controlled by modifying assembling peptoids with a single chiral amino acid side chain. Computational simulations and theoretical modeling predict that minimizing exposure of hydrophobic domains within a twisted helical form presents the most thermodynamically favorable packing of these amphiphilic peptoids and suggests a key role for both polar and hydrophobic domains on nanohelix formation. Our findings establish a platform to design and synthesize chiral functional materials using sequence-defined synthetic polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗