Search NASA⌕ Search

SEARCH · Search NASA

Results for “THERMODYNAMIC ACTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Beyond thermodynamic defect models: A kinetic simulation of arsenic activation in CdTe

To overcome the limitations of thermodynamic defect models, we introduce a multilevel kinetic approach to simulate the activation of p doping in CdTe by group V elements using arsenic as a “model” dopant. On the lowest level, we calculate thermodynamic and kinetic parameters of point defects, complexes, and reactions from first principles. On the intermediate level, we use these parameters to calculate the kinetic rates of defect reactions. Finally, we simulate the time evolution of defects and free carriers. Our results show the importance of kinetic factors in defect chemistry models. We reveal the primary arsenic activation pathway to be a fast reaction in which the tellurium atoms get kicked out and replaced on the regular anion sites by interstitial arsenic species. We discover the important role of (As i As Te ) and (As i As i ) complexes that arise during activation anneal to form kinetically stabilized transient states that not only compensate the doping but also can produce deep recombination levels. Lastly, we expect that our modeling approach and the gained insight into the atomic processes behind the doping formation will advance the defect chemistry modeling of electronic properties of materials.

14 SOLAR ENERGY↗

Mechanism of potassium-channel selectivity revealed by Na[superscript +] and Li[superscript +] binding sites within the KcsA pore

Potassium channels allow K{sup +} ions to diffuse through their pores while preventing smaller Na{sup +} ions from permeating. Discrimination between these similar, abundant ions enables these proteins to control electrical and chemical activity in all organisms. Selection occurs at the narrow selectivity filter containing structurally identified K{sup +} binding sites. Selectivity is thought to arise because smaller ions such as Na{sup +} do not bind to these K{sup +} sites in a thermodynamically favorable way. Using the model K{sup +} channel KcsA, we examined how intracellular Na{sup +} and Li{sup +} interact with the pore and the permeant ions using electrophysiology, molecular dynamics simulations and X-ray crystallography. Our results suggest that these small cations have a separate binding site within the K{sup +} selectivity filter. We propose that selective permeation from the intracellular side primarily results from a large energy barrier blocking filter entry for Na{sup +} and Li{sup +} in the presence of K{sup +}, not from a difference of binding affinity between ions.

59 BASIC BIOLOGICAL SCIENCES↗

Fuel Cell Tech Team Meeting: Engineered Nano-scale Ceramic Supports for PEM Fuel Cells [Slides]

Catalyst support durability is currently a technical barrier for commercialization of polymer electrolyte membrane (PEM) fuel cells, especially for transportation applications. Degradation and corrosion of the conventional carbon supports leads to losses in active catalyst surface area and, consequently, reduced performance. As a result, the goal of this work is to develop support materials that interact strongly with Pt, yet sustain bulk-like catalytic activities with very highly dispersed particles. Ceramic materials that are prepared using conventional solid-state methods have large grain sizes and low surface areas that can only be minimally ameliorated through grinding and ball milling. Other synthesis routes to produce ceramic materials must be investigated and utilized in order to obtain desired surface areas. In this work, several different synthesis methods are being utilized to prepare electronically conductive ceramic boride, nitride, and oxide materials with high surface areas and have the potential for use as PEMFC catalyst supports. Polymer-assisted deposition (PAD) and aerosol-through plasma (A-T-P) torch are among several methods used to obtain ceramic materials with surface areas that are equal to, or exceed Vulcan XC-72R supports. Cubic Mo-based ceramic phases have been prepared with average XRD-determined crystallite sizes as low as 1.6 nm (from full profile, XRD fitting) and a BET surface area exceeding 200 m 2 /g. Additionally, black, sub-stoichiometric TiO 2-x , have been prepared with an average crystallite size in the 4 nm range and surface areas exceeding 250 m 2 /gr. Pt disposition using an incipient wetness approach produced materials with activity for hydrogen redox reactions and ORR. Cyclic voltammetry data will be shown for a variety of potential Pt/ceramic catalysts. Initial experiments indicate enhanced Pt metal-support interactions as well. Plane wave periodic density functional calculations (VASP) are being used to predict the thermodynamic and activation barriers for fundamental electrode processes occurring at platinum surfaces supported on thin films of the ceramic support materials. The results of this work will be used in order to optimize support properties.

08 HYDROGEN↗

Rh-Based Mixed Alcohol Synthesis Catalysts: Characterization and Computational Report

The U.S. Department of Energy is conducting a program focused on developing a process for the conversion of biomass to bio-based fuels and co-products. Biomass-derived syngas is converted thermochemically within a temperature range of 240 to 330°C and at elevated pressure (e.g., 1200 psig) over a catalyst. Ethanol is the desired reaction product, although other side compounds are produced, including C 3 to C 5 alcohols; higher (i.e., greater than C 1 ) oxygenates such as methyl acetate, ethyl acetate, acetic acid and acetaldehyde; and higher hydrocarbon gases such as methane, ethane/ethene, propane/propene, etc. Saturated hydrocarbon gases (especially methane) are undesirable because they represent a diminished yield of carbon to the desired ethanol product and represent compounds that must be steam reformed at high energy cost to reproduce CO and H 2 . Ethanol produced by the thermochemical reaction of syngas could be separated and blended directly with gasoline to produce a liquid transportation fuel. Additionally, higher oxygenates and unsaturated hydrocarbon side products such as olefins also could be further processed to liquid fuels. The goal of the current project is the development of a Rh-based catalyst with high activity and selectivity to C 2 + oxygenates. This report chronicles an effort to characterize numerous supports and catalysts to identify particular traits that could be correlated with the most active and/or selective catalysts. Carbon and silica supports and catalysts were analyzed. Generally, analyses provided guidance in the selection of acceptable catalyst supports. For example, supports with high surface areas due to a high number of micropores were generally found to be poor at producing oxygenates, possibly because of mass transfer limitations of the products formed out of the micropores. To probe fundamental aspects of the complicated reaction network of CO with H 2 , a computational/ theoretical investigation using quantum mechanical and ab initio molecular dynamics calculations was initiated in 2009. Computational investigations were performed first to elucidate understanding of the nature of the catalytically active site. Thermodynamic calculations revealed that Mn likely exists as a metallic alloy with Rh in Rh-rich environments under reducing conditions at the temperatures of interest. After determining that reduced Rh-Mn alloy metal clusters were in a reduced state, the activation energy barriers of numerous transition state species on the catalytically active metal particles were calculated to compute the activation barriers of several reaction pathways that are possible on the catalyst surface. Comparison of calculations with a Rh nanoparticle versus a Rh-Mn nanoparticle revealed that the presence of Mn enabled the reaction pathway of CH with CO to form an adsorbed CHCO species, which was a precursor to C 2 + oxygenates. The presence of Mn did not have a significant effect on the rate of CH 4 production. Ir was observed during empirical catalyst screening experiments to improve the activity and selectivity of Rh-Mn catalysts. Thus, the addition of Ir to the Rh-Mn nanoparticles also was probed computationally. Simulations of Rh-Mn-Ir nanoparticles revealed that, with sufficient Ir concentrations, the Rh, Mn and Ir presumably would be well mixed within a nanoparticle. Activation barriers were calculated for Rh-Mn-Ir nanoparticles for several C-, H-, and O-containing transitional species on the nanoparticle surface. It was found that the presence of Ir opened yet another reactive pathway whereby HCO is formed and may undergo insertion with CHx surface moieties. The reaction pathway opened by the presence of Ir is in addition to the CO + CH pathway opened by the presence of Mn. Similar to Mn, the presence of Ir was not found to not affect the rate of CH 4 production.

catalyst↗

Controlled etching of hexagonal ZnO architectures in an alcohol thermal process

An alcohol thermal technique was applied to the controlled growth of hexagonal ZnO architectures via selective chemical etching. ZnO microdisks were produced first under mild alcohol thermal conditions in presence of formamide. Due to a higher surface energy/atomic density of Zn{sup 2+} {l_brace}0 0 0 1{r_brace} than that of the other faces, hexagonal ZnO microring was obtained by selectively etching positive polar surface of disk-like precursor with a high density of planar defects at the center. The selective etching of ZnO is related to its crystallographic characteristics of surface polarity and chemical activities, which opens a new opportunity for the shape-controlled synthesis of wurtzite-structured materials.

36 MATERIALS SCIENCE↗

Thermodynamic Model for the Solubility of Ba(SeO 4 , SO 4 ) Precipitates

The solubility of Ba(SeO 4 , SO 4 ) precipitates was determined as a function of the BaSeO 4 mole fractions, ranging from 0.0015 to 0.3830, and time with an equilibration period extending to as long as 302 days. Equilibrium/steady state conditions in this system are reached in ≤ 65 days. Pitzer’s ion interaction model was used to calculate solid and aqueous phase activity coefficients. Thermodynamic analyses showed that the data do not satisfy Gibbs-Duhem equation, thereby demonstrating that a single-solid solution phase does not control both the selenate and sulfate concentrations. Our extensive data with log 10 [Ba] ranging from -3.6 to -5.9 mol kg -1 , log 10 [SeO 4 ] rangingfrom-3.6 to -5.2 mol kg -1 , and log 10 [SO 4 ] ranging from-4.0 to -5.3 mol kg -1 can be explained with the formation of an ideal BaSeO 4 solid solution phase that controls the selenium concentrations and a slightly disordered/less-crystalline BaSO 4 (s) (log 10 Κ° sp = -9.5 instead of -10.05 for barite) that controls the sulfate concentrations. In these experiments the BaSO 4 component of the solid solution phase never reaches thermodynamic equilibrium with the aqueous phase. Thermodynamic interpretations of the data show that both the ideal BaSeO 4 solid solution phase and less-crystalline BaSO 4 (s) phase are in equilibrium with each other in the entire range of BaSeO 4 mole fractions investigated in this study.

Rai, D.↗

Solubility parameter and activity coefficient of HDEHP dimer in select organic diluents by vapor pressure osmometry

A thorough understanding of the non-ideal behavior of the chemical components utilized in solvent extraction contributes to the success of any large-scale spent nuclear fuel treatment. To address this, our current work uses vapor pressure osmometry to characterize the non-ideal behavior of the solvent extraction agent di-(2-ethylhexyl) phosphoric acid (HDEHP), a common extractant in proposed separation schemes. Solubility parameters were fit to data on HDEHP at four temperatures using models based on Scatchard Hildebrand regular solution theory with Flory Huggins entropic corrections. The results are comparable but not identical to the activity coefficients from prior slope analysis in the literature. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Structure of Se{sub 95}As{sub 5} Chalcogenide Glassy Semiconductor Doped by EuF{sub 3} Impurity

The local structure of film samples of the chalcogenide glassy semiconductors Se{sub 95}As{sub 5} and Se{sub 95}As{sub 5}(EuF{sub 3}){sub x} (x = 0.01–1 at %) are studied by X-ray diffraction and Raman scattering. The “quasiperiod” of the structure, the correlation length, the structural elements, and the chemical bonds, which form the amorphous matrix of the investigated materials, are determined. The obtained results are interpreted within the framework of the Elliott void–cluster model taking into account the chemical activity of europium ions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

TOUGHREACT Testing in High Ionic Strength Brine Sandstone Systems

Deep saline formations and oil and gas reservoirs often contain concentrated brine solutions of ionic strength greater than 1 (I > 1 M). Geochemical modeling, involving high ionic strength brines, is a challenge. In the original TOUGHREACT code (Xu et al., 2004; Xu et al., 2006), activity coefficients of charged aqueous species are computed using an extended Debye-Huckel (DH) equation and parameters derived by Helgeson et al. (1981). The DH model can deal with ionic strengths from dilute to moderately saline water (up to 6 molal for an NaCl-dominant solution). The equations implemented for the DH model are presented in Appendix A. During the course of the Yucca Mountain project, a Pitzer ion-interaction model was implemented into TOUGHREACT. This allows the application of this simulator to problems involving much more concentrated aqueous solutions, such as those involving geochemical processes in and around high-level nuclear waste repositories where fluid evaporation and/or boiling is expected to occur (Zhang et al., 2007). The Pitzer ion-interaction model, which we refer to as the Pitzer virial approach, and associated ion-interaction parameters have been applied successfully to study non-ideal concentrated aqueous solutions. The formulation of the Pitzer model is presented in Appendix B; detailed information can be founded in Zhang et al. (2007). For CO{sub 2} geological sequestration, the Pitzer ion-interaction model for highly concentrated brines was incorporated into TOUGHREACT/ECO2N, then was tested and compared with a previously implemented extended Debye-Hueckel (DH) ion activity model. The comparison was made through a batch geochemical system using a Gulf Coast sandstone saline formation.

54 ENVIRONMENTAL SCIENCES↗

Thermodynamic model for the solubility of BaSeO4(cr) in the aqueous Ba2+-SeO42--Na+-H+-OH--H2O system: Extending to high selenate concentrations

The solubility of Ba(SeO4, SO4) precipitates was determined as a function of the BaSeO4 mole fractions, ranging from 0.0015 to 0.3830, and time with an equilibration period extending to as long as 302 days. Equilibrium/steady state conditions in this system are reached in ≤ 65 days. Pitzer’s ion interaction model was used to calculate solid and aqueous phase activity coefficients. Thermodynamic analyses showed that the data do not satisfy Gibbs-Duhem equation, thereby demonstrating that a single-solid solution phase does not control both the selenate and sulfate concentrations. Our extensive data with log10 [Ba]) ranging from -3.6 to -5.9 mol.kg-1, log10 [SeO4]) ranging from -3.6 to -5.2 mol.kg-1, and log10 [SO4] ranging from -4.0 to -5.3 mol.kg-1 can be explained with the formation of an ideal BaSeO4 solid solution phase that controls the selenium concentrations and a slightly disordered/less-crystalline BaSO4(s) (log10 K0sp = -9.5 instead of -10.05 for barite) that controls the sulfate concentrations. In these experiments the BaSO4 component of the solid solution phase never reaches thermodynamic equilibrium with the aqueous phase. Thermodynamic interpretations of the data show that both the ideal BaSeO4 solid solution phase and less-crystalline BaSO4(s) phase are in equilibrium with each other in the entire range of BaSeO4 mole fractions investigated in this study.

Rai, Dhanpat↗

Chemical repair of base lesions, AP-sites, and strand breaks on plasmid DNA in dilute aqueous solution by ascorbic acid

Highlights: •We report a novel mechanism of radiation protection of DNA by chemical activity of ascorbic acid. •The “chemical repair” of DNA damage was revealed using biochemical assay and chemical kinetics analysis. •We found that ascorbic acid significantly repairs precursors of nucleobase lesions and abasic sites. •However, ascorbic acid seldom repairs precursors of DNA-strand breaks. -- Abstract: We quantified the damage yields produced in plasmid DNA by γ-irradiation in the presence of low concentrations (10–100 μM) of ascorbic acid, which is a major antioxidant in living systems, to clarify whether it chemically repairs radiation damage in DNA. The yield of DNA single strand breaks induced by irradiation was analyzed with agarose gel electrophoresis as conformational changes in closed circular plasmids. Base lesions and abasic sites were also observed as additional conformational changes by treating irradiated samples with glycosylase proteins. By comparing the suppression efficiencies to the induction of each DNA lesion, in addition to scavenging of the OH radicals derived from water radiolysis, it was found that ascorbic acid promotes the chemical repair of precursors of AP-sites and base lesions more effectively than those of single strand breaks. We estimated the efficiency of the chemical repair of each lesion using a kinetic model. Approximately 50–60% of base lesions and AP-sites were repaired by 10 μM ascorbic acid, although strand breaks were largely unrepaired by ascorbic acid at low concentrations. The methods in this study will provide a route to understanding the mechanistic aspects of antioxidant activity in living systems.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

hcp metal nanoclusters with hexagonal A-A bilayer stacking stabilized by enhanced covalent bonding

First-principles total energy calculations within density functional theory have been performed to study the geometric and electronic structures of Ru{sub n} nanoclusters of varying size n (14{<=}n{<=}42). Strikingly, for the size range of n=14 to 38, the clusters always prefer a hexagonal bilayer structure with A-A stacking, rather than some of the more closely packed forms, or bilayer with A-B stacking. Such an intriguing 'molecular double-wheel' form is stabilized by substantially enhanced interlayer covalent bonding associated with strong s-d hybridization. Similar A-A stacking is also observed in the ground states or low-lying isomers of the clusters composed of other hcp elements, such as Os, Tc, Re, and Co. Note that these 'molecular double-wheels' show enhanced chemical activity toward H{sub 2}O splitting relative to their bulk counterpart, implying its potential applications as nanocatalysts.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnesium Loss in Nd:YAG Pulsed Laser Welding of Aluminum Alloys

In the current investigation, the loss of magnesium (Mg) in Nd:YAG pulsed laser welding of a number of aluminum (Al) alloys was studied both experimentally and numerically. The experimental results showed that at a fixed average laser power, with the increasing pulse frequency, Mg concentration of the weld metals decreased. A numerical model was developed for the calculation of Mg evaporation from the weld pool. The model predicted a trend in the changes of Mg concentration of the weld pool, working best for alloys containing the higher levels of Mg. The calculations showed that with the increasing pulse frequency from 15 to 40 Hz, due to a decrease in the average temperature of the weld pool, Mg loss in terms of mass per unit area of the weld spot actually decreased from 230 × 10{sup −5} to 120 × 10{sup −5} kg/m{sup 2}. However, due to a decrease in the weld penetration/volume, the effective Mg loss of the weld metal in terms of concentration increased from 110 × 10{sup −1} to 260 × 10{sup −1} kg/m{sup 3}. It was shown that due to interactions between Mg and other main alloying elements, the activity coefficient of Mg had to be modified for the model to accurately predict Mg evaporation of the weld pool.

36 MATERIALS SCIENCE↗

In situ Characterization of Pt Catalysts Supported on Ceria Modified TiO(2) for the WGS reaction: Influence of Ceria Loading

This work analyzes the influence of cerium content (6-15 wt%) on a TiO{sub 2} support over the structure and water gas shift (WGS) activity of Pt catalysts. The structural properties of these Pt/Ce-TiO{sub 2} catalysts were characterized by XRD, TEM and XANES. Physicochemical characterization of the catalysts showed differences in the structure and dispersion of Ce entities on the support with Ce loading. For the samples with low ceria content (6 wt%), cerium is deposited on the support in the form of CeO{sub x} clusters in a highly dispersed state in close interaction with the Ti atoms. The formation of CeO{sub x} clusters at low Ce-loading on the support facilitates the dispersion of small particles of Pt and improves the reducibility of ceria component at low temperatures. The changes in platinum dispersion and support reducibility with Ce-loading on the TiO{sub 2} support lead to significant differences in the WGS activity. Pt supported on the sample with lower Ce content (6 wt%) shows better activity than those corresponding to catalysts with higher Ce content (15 wt%). Activity measurements coupled with catalysts characterization suggest that the improvement in the reducibility of the support with lower Ce content was associated with the presence of CeO{sub x} clusters of high reducibility that improve the chemical activity of the oxide-metal interfaces at which the WGS reaction takes place.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effect of applied electric field on pulsed radio frequency and pulsed direct current plasma jet array

Here we compare the plasma plume propagation characteristics of a 3-channel pulsed RF plasma jet array and those of the same device operated by a pulsed dc source. For the pulsed-RF jet array, numerous long life time ions and metastables accumulated in the plasma channel make the plasma plume respond quickly to applied electric field. Its structure similar as 'plasma bullet' is an anode glow indeed. For the pulsed dc plasma jet array, the strong electric field in the vicinity of the tube is the reason for the growing plasma bullet in the launching period. The repulsive forces between the growing plasma bullets result in the divergence of the pulsed dc plasma jet array. Finally, the comparison of 309 nm and 777 nm emissions between these two jet arrays suggests the high chemical activity of pulsed RF plasma jet array.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High Catalytic Activity of Au/CeOx/TiO2(110) Controlled by the Nature of the Mixed Metal Oxide at the Nanometer Level

Mixed-metal oxides play a very important role in many areas of chemistry, physics, materials science, and geochemistry. Recently, there has been a strong interest in understanding phenomena associated with the deposition of oxide nanoparticles on the surface of a second (host) oxide. Here, scanning tunneling microscopy, photoemission, and density-functional calculations are used to study the behavior of ceria nanoparticles deposited on a TiO2(110) surface. The titania substrate imposes nontypical coordination modes on the ceria nanoparticles. In the CeOx/TiO2(110) systems, the Ce cations adopt an structural geometry and an oxidation state (+3) that are quite different from those seen in bulk ceria or for ceria nanoparticles deposited on metal substrates. The increase in the stability of the Ce3+ oxidation state leads to an enhancement in the chemical and catalytic activity of the ceria nanoparticles. The codeposition of ceria and gold nanoparticles on a TiO2(110) substrate generates catalysts with an extremely high activity for the production of hydrogen through the water-gas shift reaction (H2O + CO ? H2 + CO2) or for the oxidation of carbon monoxide (2CO + O2 ? 2CO2). The enhanced stability of the Ce3+ state is an example of structural promotion in catalysis described here on the atomic level. The exploration of mixed-metal oxides at the nanometer level may open avenues for optimizing catalysts through stabilization of unconventional surface structures with special chemical activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗