Search NASA⌕ Search

SEARCH · Search NASA

Results for “THREE-DIMENSIONAL MOTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Time-split finite-volume method for three-dimensional blunt-body flow

An efficient numerical method for calculating plane, axisymmetric, and fully three-dimensional blunt-body flow is presented. It is a second-order-accurate, time-dependent finite-volume procedure that solves the Euler equations in integral conservation-law form. These equations are written with respect to a Cartesian coordinate system in which an embedded mesh adjusts in time to the motion of the bow shock that is automatically captured as part of the weak solution. With such an adjusting mesh, oscillations in flow properties near the shock are shown to be virtually eliminated. The scheme uses a time-splitting concept that accelerates the convergence appreciably. Comparisons are made between computed and experimental results.

Rizzi, A. W.↗
NASA NTRS1975

Techniques for measuring bulk gas-motions from satellites

There is a growing appreciation for the dynamic nature of the upper atmosphere. This paper is concerned principally with discussing the methods for making in-situ measurements of the ambient gas velocities from satellites. Both neutral and ion instrumentation is discussed, but most attention is paid to the ion sensors on Atmosphere-Explorer-C, which are now providing the first detailed three-dimensional gas-velocity measurements from a satellite. While some data are presented, emphasis is placed on experimental difficulties and possible ways of alleviating these problems. It seems reasonable to expect that both neutral and ion gas velocities will be measured to an accuracy of the order of 20 m/s in future satellites, provided that a star tracker is available for the determination of vehicle attitude. The possible exception to this is the ram component of the neutral-gas velocity vector, for which no proven instrumentation yet exists.

Hanson, W. B.↗
NASA NTRS1977

Forced motion of an initially stressed rectangular plate - An elasticity solution

An initially stressed rectangular plate is subjected to a transverse, time dependent load. The initial stress field is constant and parallel to two of the plate edges. The transverse load is uniformly distributed over a rectangular area, the sides of which are parallel to the sides of the plate. The problem is formulated within the framework of classical, three-dimensional elasticity theory, and an exact solution is obtained in series form. The case of static stability under pre-stress is also considered.

Reismann, H.↗
NASA NTRS1972

Unsteady viscous effects in the flow over an oscillating surface

A theoretical model for the interaction of a turbulent boundary layer with an oscillating wavy surface over which a fluid is flowing is developed, with an application to wind-driven water waves and to panel flutter in low supersonic flow. A systematic methodology is developed to obtain the surface pressure distribution by considering separately the effects on the perturbed flow of a mean shear velocity profile, viscous stresses, the turbulent Reynolds stresses, compressibility, and three-dimensionality. The inviscid theory is applied to the wind-water wave problem by specializing to traveling-wave disturbances, and the pressure magnitude and phase shift as a function of the wave phase speed are computed for a logarithmic mean velocity profile and compared with inviscid theory and experiment. The results agree with experimental evidence for the stabilization of the panel motion due to the influence of the unsteady boundary layer.

Lerner, J. I.↗
NASA NTRS1976

Numerical modeling of pollutant transport using a Lagrangian marker particle technique

A derivation and code were developed for the three-dimensional mass transport equation, using a particle-in-cell solution technique, to solve coastal zone waste discharge problems where particles are a major component of the waste. Improvements in the particle movement techniques are suggested and typical examples illustrated. Preliminary model comparisons with analytic solutions for an instantaneous point release in a uniform flow show good results in resolving the waste motion. The findings to date indicate that this computational model will provide a useful technique to study the motion of sediment, dredged spoils, and other particulate waste commonly deposited in coastal waters.

Spaulding, M.↗
NASA NTRS1976

A demonstration of an independent-station radio interferometry system with 4-cm precision on a 16-km base line

Radio interferometry promises eventually to measure directly, with accuracies of a few centimeters, both whole earth motions and relative crustal motions with respect to an 'inertial' reference frame. Interferometry measurements of arbitrarily long base lines require, however, the development of new techniques for independent-station observation. In connection with the development of such techniques, a series of short base line demonstration experiments has been conducted between two antennas. The experiments were related to a program involving the design of independent-station instrumentation capable of making three-dimensional earth-fixed base line measurements with an accuracy of a few centimeters. Attention is given to the instrumentation used in the experiments, aspects of data analysis, and the experimental results.

Thomas, J. B.↗
NASA NTRS1976

Conformal mappings for computations of steady, three-dimensional, supersonic flows

The evaluation of steady, supersonic, three-dimensional inviscid flows is considered, taking into account the construction of suitable grids on the basis of a simple conformal mapping. A description is presented of an analytical mapping technique. The technique is illustrated with the aid of examples of mappings, involving nontrivial geometries. Attention is given to a wing-fuselage cross section, a FORTRAN program for the basic mapping, the coupling of mappings, and the equations of motion.

Moretti, G.↗
NASA NTRS1974

An experiment in manipulator control with proximity sensors

Optical proximity sensors were used in a feedback loop to automatically position a manipulator hand for grasping. The experiment was a simplified one, involving two dimensional motion only. Two proximity sensors were mounted on the hand, and control signals derived from their outputs were used to drive the hand vertically and horizontally. The sensors employ a pulsed gallium arsenide light-emitting diode together with a silicon detector. They indicate, without contact, the approximate distance between the manipulator hand and object in the range from 5 to 12 cm. Positioning within approximately + or - 5 mm was observed. Extension of the technique to general three-dimensional control is briefly discussed.

Johnston, A. R.↗
NASA NTRS1954

A Visualization Study of Secondary Flows in Cascades

Flow-visualization techniques are employed to ascertain the streamline patterns of the nonpotential secondary flows in the boundary layers of cascades, and thereby to provide a basis for more extended analyses in turbomachines. The three-dimensional deflection of the end-wall boundary layer results in the formation of a vortex within each cascade passage. The size and tightness of the vortex generated depend upon the main-flow turning in the cascade passage. Once formed, a vortex resists turning in subsequent blade rows, with consequent unfavorable angles of attack and possible flow disturbances on the pressure surfaces of subsequent blade rows when the vortices impinge on these surfaces. Two major tip-clearance effects are observed, the formation of a tip-clearance vortex and the scraping effect of a blade with relative motion past the wall boundary layer. The flow patterns indicate methods for improving the blade tip-loading characteristics of compressors and of low- and high-speed turbulence.

Herzig, Howard Z↗
NASA NTRS1953

Theory and procedure for determining loads and motions in chine-immersed hydrodynamic impacts of prismatic bodies

A theoretical method is derived for the determination of the motions and loads during chine-immersed water landings of prismatic bodies. This method makes use of a variation of two-dimensional deflected water mass over the complete range of immersion, modified by a correction for three-dimensional flow. Equations are simplified through omission of the term proportional to the acceleration of the deflected mass for use in calculation of loads on hulls having moderate and heavy beam loading. The effects of water rise at the keel are included in these equations. In order to make a direct comparison of theory with experiment, a modification of the equations was made to include the effect of finite test-carriage mass. A simple method of computation which can be applied without reading the body of this report is presented as an appendix along with the required theoretical plots for determination of loads and motions in chine-immersed landings.

Schnitzer, Emanuel↗
NASA NTRS1978

Experimental study of the laminar-turbulent transition of a concave wall in a parallel flow

The instability of the laminar boundary layer flow along a concave wall was studied. Observations of these three-dimensional boundary layer phenomena were made using the hydrogen-bubble visualization technique. With the application of stereo-photogrammetric methods in the air-water system it was possible to investigate the flow processes qualitatively and quantitatively. In the case of a concave wall of sufficient curvature, a primary instability occurs first in the form of Goertler vortices with wave lengths depending upon the boundary layer thickness and the wall curvature. At the onset the amplification rate is in agreement with the linear theory. Later, during the non-linear amplification stage, periodic spanwise vorticity concentrations develop in the low velocity region between the longitudinal vortices. Then a meandering motion of the longitudinal vortex streets subsequently ensues, leading to turbulence.

Bippes, H.↗
NASA NTRS1974

Magnetic field and electric current structure in the chromosphere

The three-dimensional vector magnetic field structure in the chromosphere above an active region is deduced by using high-resolution H-alpha filtergrams together with a simultaneous digital magnetogram. An analog model of the field is made with 400 metal wires representing field lines that outline the H-alpha structure. The height extent of the field is determined from vertical field-gradient observations around sunspots, from observed fibril heights, and from an assumption that the sources of the field are largely local. The computed electric currents (typically 10 mA/sq m) are found to flow in patterns not similar to observed features and not parallel to magnetic fields. Force structures correspond to observed solar features; the dynamics to be expected include: downward motion in bipolar areas in the lower chromosphere, an outflow of the outer chromosphere into the corona with radially outward flow above bipolar plage regions, and motion of arch filament systems.

Dravins, D.↗
NASA NTRS1977

Hot interstellar tunnels. I - Simulation of interacting supernova remnants

It has been suggested that intersecting supernova remnants (SNRs) contribute to the production of gas at about 1 million K which is apparently observed in the interstellar medium. This suggestion is evaluated through a fairly detailed numerical simulation that is used to investigate the large-scale three-dimensional behavior of a test section of the gaseous galactic disk under the influence of evolving and interacting SNRs. Models for a noninteracting 'isolated' SNR and the ambient medium are discussed, pairs of interacting remnants are examined along with the mechanism by which their central cavities can become connected, and the evolution of larger aggregates of SNRs is analyzed. Results are presented for a sequence of simulations having the same values of supernova blast energy, ambient ion density, and isolated SNR lifetime, but different supernova rates per unit volume. These results show that SNR intersections can quickly generate large volumes, or 'tunnels', of very hot gas from a cold starting medium under conservative and reasonable assumptions, the most important of which are that SNRs can be treated as spheres and mass motions can be treated implicitly.

Smith, B. W.↗
NASA NTRS1972

Study of propellant dynamics in a shuttle type launch vehicle

A method and an associated digital computer program for evaluating the vibrational characteristics of large liquid-filled rigid wall tanks of general shape are presented. A solution procedure was developed in which slosh modes and frequencies are computed for systems mathematically modeled as assemblages of liquid finite elements. To retain sparsity in the assembled system mass and stiffness matrices, a compressible liquid element formulation was incorporated in the program. The approach taken in the liquid finite element formulation is compatible with triangular and quadrilateral structural finite elements so that the analysis of liquid motion can be coupled with flexible tank wall motion at some future time. The liquid element repertoire developed during the course of this study consists of a two-dimensional triangular element and a three-dimensional tetrahedral element.

Jones, C. E.↗
NASA NTRS1973

Control law synthesis and sensor design for active flutter suppression.

Methods are presented for representing unsteady aerodynamic loadings, valid for arbitrary motion, for the two-dimensional typical section with a trailing-edge control surface in incompressible flow and a three-dimensional lifting surface with leading- or trailing-edge control surfaces in subsonic compressible flow. Loads for the two-dimensional incompressible case are obtained via analytic continuation of the Theodorsen function into the complex plane, with guidance from a time-domain approximation of the Wagner indicial function. For the three-dimensional case, it is proposed that oscillatory generalized aerodynamic forces be approximated by Pade fractions, thereby permitting an obvious continuation into the complex plane. A theoretical justification for this procedure is briefly outlined, and some practical aspects of its implementation are discussed.

Lyons, M. G.↗
NASA NTRS1972

The physics of the neutral upper atmosphere.

Particular attention is given to models of the upper atmosphere that deal with the diurnal variation and the latitudinal density dependence. The upper atmosphere is considered as essentially an ideal gas, or rather a weakly ionized plasma, where physical and chemical processes of considerable complexity take place. The final goal for the theoretical models of the upper atmosphere is to derive the time and space dependence of the physical quantities density, composition, temperature, pressure, and state of motion by theoretical considerations from basic physical assumptions. Questions of the dynamics of the upper atmosphere are discussed together with one- and two-dimensional models of the upper atmosphere, three-dimensional models, the geomagnetic effect, and the semiannual density variation.

Blum, P.↗
NASA NTRS1974

Comparison of approximate and numerical analyses of nonlinear combustion instability

At the present time, there are three general analytical techniques available to study problems of unsteady motions in rocket motors: linear stability analysis; approximate nonlinear analysis, founded on examining the behavior of coupled normal modes; and numerical calculations based on the conservation equations for one-dimensional flows. The last two yield the linear results as a limit. It is the main purpose of this paper to check the accuracy of the approximate analysis against the numerical analysis for some special cases. The results provide some justification for using the approximate analysis to study three-dimensional problems.

Culick, F. E. C.↗