Search NASA⌕ Search

SEARCH · Search NASA

Results for “TIN COMPOUND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Effect of different sulphur precursors on morphology and band-gap on the formation of Cu{sub 2}ZnSnS{sub 4} (CZTS) particles with microwave irradiation

Cu{sub 2}ZnSnS{sub 4} (CZTS) is a promising semiconductor material for ecological cost effective thin film Photovoltaic (PV) devices. As it contains earth abundant and non-toxic elements, it has the advantages over commercially available CIGS and CdTe thin film PV devices. In the present work, the pure phase Cu{sub 2}ZnSnS{sub 4} particles were successfully synthesised with microwave irradiation. The morphology and phase study was carried out for the samples prepared with two different sulphur precursors viz. thiourea and thioacetamide (TAA). CZTS particles with thiourea as sulphur precursor are more crystalline than CZTS particles with TAA. The band gap of 1.654 eV and 1.713 eV were calculated for the samples prepared with thiourea and TAA respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructural behavior of iron and bismuth added Sn-1Ag-Cu solder under elevated temperature aging

An extensive study was done to investigate the microstructural behavior of iron (Fe) and bismuth (Bi) added Sn-1Ag-0.5Cu (SAC105) under severe thermal aging conditions. The isothermal aging was done at 200 °C for 100 h, 200 h, and 300 h. Optical microscopy with cross-polarized light revealed that the grain size significantly reduces with Fe/Bi addition to the base alloy SAC105 and remains literally the same after thermal aging. The micrographs of field emission scanning electron microscopy (FESEM) with backscattered electron detector and their further analysis via imageJ software indicated that Fe/Bi added SAC105 showed a significant reduction in the IMCs size (Ag{sub 3}Sn and Cu{sub 6}Sn{sub 5}), especially the Cu{sub 6}Sn{sub 5} IMCs, as well as β-Sn matrix and a refinement in the microstructure, which is due to the presence of Bi in the alloys. Moreover, their microstructure remains much more stable under severe thermal aging conditions, which is because of the presence of both Fe and Bi in the alloy. The microstructural behavior suggests that Fe/Bi modified SAC105 would have much improved reliability under severe thermal environments. These modified alloys also have relatively low melting temperature and low cost.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical second harmonic generation and its photoinduced dynamics in ferroelectric semiconductor Sn{sub 2}P{sub 2}S{sub 6}

By means of optical pump–probe technique, the ultrafast dynamics of nonlinear optical response of the ferroelectric semiconductor Sn{sub 2}P{sub 2}S{sub 6} crystal excited with a femtosecond laser pulse has been investigated. It has been shown that, under the action of femtosecond pulses, change in optical second harmonic generation occurs in the sample, which can be due to screening of existing electric polarization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic and Spectral Properties of RRhSn (R = Gd, Tb) Intermetallic Compounds

The investigations of electronic structure and optical properties of GdRhSn and TbRhSn were carried out. The calculations of band spectrum, taking into account the spin polarization, were performed in a local electron density approximation with a correction for strong correlation effects in 4f shell of rare earth metal (LSDA + U method). The optical studies were done by ellipsometry in a wide range of wavelengths, and the set of spectral and electronic characteristics was determined. It was shown that optical absorption in a region of interband transitions has a satisfactory explanation within a scope of calculations of density of electronic states carried out.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Half-Metallic Ferrimagnetism in CoFeNbZ (Z = Al, Si, Ge, Sn) Quaternary Heusler Alloys: a DFT Study

First principles calculations based on density functional theory is used to study the structural, electronic, and magnetic properties of novel CoFeNbZ (Z = Al, Si, Ge, Sn) quaternary Heusler alloys with the full-potential linearized augmented plane wave (FP-LAPW) method. The exchange-correlation effects are treated using generalized gradient approximation (GGA) to study the structural properties. With GGA as the exchange-correlation potential, CoFeNbAl and CoFeNbSn are half-metallic with 100% spin polarization, whereas CoFeNbSi and CoFeNbGe are nearly half-metallic with high spin polarization of 90.06 and 98.28% respectively. For CoFeNbAl and CoFeNbSn, the spin-flip gap increases with the use of modified Becke-Johnson potential. Using this approximation, CoFeNbGe is a half-metal with a spin-flip gap of 0.303 eV. The magnetic properties indicate that all the compounds follow the M{sub t} = Z{sub t} - 24 Slater-Pauling rule. The half-metallic behavior is maintained over a relatively wide range of lattice constants against hydrostatic strain. The transport properties of half-metallic CoFeNbZ (Z = Al, Ge, Sn) compounds are reported. Our present work has the potential to trigger the design of quaternary Heusler alloys with applications in spintronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Isothermal Aging on the Thermal Expansion of Several Sn-Based Lead-Free Solder Alloys

In this paper, effects of high-temperature aging on the thermal expansion behavior of several lead-free alloys SAC305, SAC387, Sn-3.5Ag, SnCu, SN100C (SnCu-Ni-Ge) and SnCu-0.01Ge have been explored. The coefficients of thermal expansion (CTEs) of the alloys have been experimentally determined over the temperature range 30-150 °C after isothermal aging at 125 °C for up to 30 days (720 h). The CTE values of SAC305, SAC387 and Sn-3.5Ag increase by 8-16% after 30 days of aging, while the CTE values of SnCu, SnCu-Ge and SN100C solders increase by only 3-6%. The CTE evolution of lead-free solders can be explained by microstructural changes observed during isothermal aging, which causes coarsening of various phases of the solder. As the phases coarsen, dislocation movement proceeds with a consequent increase in the average interparticle distance. The observation of CTE increases during isothermal aging suggests potential reliability problems for lead-free solder joints subjected to long-term aging exposures at high temperatures.

36 MATERIALS SCIENCE↗

Single crystal studies on boron-rich {tau}-borides Ni{sub 23-x}M{sub x}B{sub 6} (M=Zn, Ga, In, Sn, Ir)-The surprising occurrence of B{sub 4}-tetraheda as a normal case?

Single crystals of the cubic {tau}-borides Ni{sub 23-x}M{sub x}B{sub 6} (M=Zn, Ga, In, Sn, Ir) were synthesised from the elements at temperatures between 1200 and 1500 {sup o}C. The structure refinements show that the existence of boron-rich phases is quite common. Starting from the idealised composition Ni{sub 20}M'{sub 3}B{sub 6} a part of the metal atoms on site 8c is substituted by B{sub 4} tetrahedra. For M'=Ga a complete exchange seems to be possible leading to the composition Ni{sub 20}GaB{sub 14}. For M'=Zn and Sn the formation of solid solutions is less extended. For M'=In no exchange is observed but an unusual pattern of Ni/In distribution is observed. With M=Ir mixed occupations occur for all sites and the boron content varies, too. All compositions were confirmed by EDX measurements. - Graphical abstract: Crystal structure of {tau}-Borides M{sub 23}B{sub 6}; M1: M{sub 8}-cubes, M2: M{sub 12}-cuboctahedra centred by M3, isolated M-atoms: M4; grey circles: boron, black circles: metal atoms.

36 MATERIALS SCIENCE↗

Phase equilibria, formation, crystal and electronic structure of ternary compounds in Ti-Ni-Sn and Ti-Ni-Sb ternary systems

The phase equilibria of the Ti-Ni-Sn and Ti-Ni-Sb ternary systems have been studied in the whole concentration range by means of X-ray and EPM analyses at 1073 K and 873 K, respectively. Four ternary intermetallic compounds TiNiSn (MgAgAs-type), TiNi{sub 2-x}Sn (MnCu{sub 2}Al-type), Ti{sub 2}Ni{sub 2}Sn (U{sub 2}Pt{sub 2}Sn-type), and Ti{sub 5}NiSn{sub 3} (Hf{sub 5}CuSn{sub 3}-type) are formed in Ti-Ni-Sn system at 1073 K. The TiNi{sub 2}Sn stannide is characterized by homogeneity in the range of 50-47 at% of Ni. The Ti-Ni-Sb ternary system at 873 K is characterized by formation of three ternary intermetallic compounds, Ti{sub 0.8}NiSb (MgAgAs-type), Ti{sub 5}Ni{sub 0.45}Sb{sub 2.55} (W{sub 5}Si{sub 3}-type), and Ti{sub 5}NiSb{sub 3} (Hf{sub 5}CuSn{sub 3}-type). The solubility of Ni in Ti{sub 0.8}NiSb decreases number of vacancies in Ti site up to Ti{sub 0.91}Ni{sub 1.1}Sb composition. - Graphical abstract: Isothermal section of the Ti-Ni-Sn phase diagram and DOS distribution in hypothetical TiNi{sub 1+x}Sn solid solution. Highlights: Black-Right-Pointing-Pointer Ti-Ni-Sn phase diagram was constructed at 1073 K. Black-Right-Pointing-Pointer Four ternary compounds are formed: TiNiSn, TiNi{sub 2-x}Sn, Ti{sub 2}Ni{sub 2}Sn, and Ti{sub 5}NiSn{sub 3}. Black-Right-Pointing-Pointer Three ternary compounds exist in Ti-Ni-Sb system at 873 K. Black-Right-Pointing-Pointer The TiNi{sub 2}Sb compound is absent.

36 MATERIALS SCIENCE↗

Microstructural evolution of ω assisted α precipitates in β-CEZ alloy during ageing process

Highlights: • Ultrafine Athermal ω precipitates were formed in β-CEZ alloy by quenching from above the β transus temperature. • In the ageing process, these ω precipitates coarsen, accompanied by the form of needle-like α phase. • ω precipitates were formed by {111}β planes shift 0.5d222 along the direction. • The superfine α particles are formed in close proximity of the ω/β interface. - Abstract: The microstructural evolution in β-CEZ (Ti-5Al-2Sn-4Zr-4Mo-2Cr-1Fe wt%) alloy, after quenching and ageing, has been investigated by combining results from orientation imaging microscopy, transmission electron microscopy, high-resolution TEM (HRTEM). Ultrafine Athermal ω precipitates (about 1 nm) are formed in this alloy by quenching from above the β transus temperature. In the ageing process, these ω precipitates coarsen, accompanied by the form of needle-like α phase. The scale of ω assisted α increased from 5 to 10 nm in width and about 50 nm in length to 10 nm in width and 100–300 nm in length while extending ageing time from 2 h to 5 h at 350 °C. However, when going on extending the ageing time from 5 h to 20 h at 350 °C, the scale of α didn't grow dramatically but the density of α increased clearly. When increasing the ageing temperature from 350 °C to 450 °C, the scale of ω assisted α grow dramatically. Furthermore, the structural relationship of ω and α is observed by HRTEM images. It can be found that ω precipitates were formed by {111}β planes shift 0.5d222 along the <111> direction, and the superfine α particles are formed in close proximity of the ω/β interface.

36 MATERIALS SCIENCE↗

Stress-induced α″ phase in a beta Ti–19Nb–1.5Mo–4Zr–8Sn alloy

Highlights: • Morphologies/distributions of α″ produced by stretching/rolling are similar. • Under small deformation, α″ martensite consists of parallel lamellar structures. • Under larger deformations, martensite has ladder-like pattern and parallel ellipsoids. • With the increase of deformation hardness decreases firstly and then increases. - Abstract: The morphological evolution of the stress-induced α″ martensite with increases in the stretching and rolling deformation degrees as well as the related orientation relationship were investigated in a β titanium alloy (Ti–19Nb–1.5Mo–4Zr–8Sn)·For a stretching deformation of 1%, the α″ martensite exhibited a packet morphology consisting of parallel lamellar structures. On the other hand, in the 2%-rolled sample, the α″ martensite exhibited a long lath-like distribution, which was accompanied by a few small pieces. With an increase in the deformation degree, the α″ martensite gradually exhibited a ladder-like structure consisting of long and short α″ laths or ellipsoids. The existence of these self-accommodating martensitic variants decreased the elastic energy. The parallel α″ laths present within a single packet were found to have the same orientation. The interface between the α″ and β phases was coherent, and their lattice constant relationships were identified as √2a{sub β}≈b{sub α″}≈c{sub α″} and a{sub β} ≈ a{sub α″}. Further, with the increase in the deformation degree, the hardness of the alloy first decreased and then increased; this was the case both the stretched as well as the rolled samples.

36 MATERIALS SCIENCE↗

Effect of initial orientation on dynamic recrystallization of a zirconium alloy during hot deformation

Highlights: • The dynamic recrystallization process is enhanced by the operation of slip. • Continuous dynamic recrystallization is promoted by the rotation of grains. • Texture induced hardening hides the softening induced by dynamic recrystallization. - Abstract: The present study investigated the influence of the initial orientation on the dynamic recrystallization (DRX) behavior of a Zr-1Sn-0.3Nb alloy. A hot-rolled and annealed Zr sheet was compressed along two directions: along the normal direction so that the grains' -axis was nearly parallel to the loading direction (0° sample) and along the transverse direction so that the grains' -axis was nearly perpendicular to the loading direction (90° sample). The samples were compressed at 700 °C at a strain rate of 1 s{sup −1}. The microstructures at different strains were characterized by the electron backscatter diffraction (EBSD) technique, and conventional dislocation analysis using transmission electron microscope (TEM) was performed. A threshold value of grain orientation spread (GOS) equaled to 5° was used to distinguish the dynamically recrystallized grains from the deformed matrix. The results revealed that the DRX behavior strongly depended on the initial orientation. The Schmid factor analysis and TEM observation confirmed that pyramidal slip operated from the first stage of deformation in the 0° sample but not in the 90° sample. For the 0° sample, in the early and medium stages of deformation, due to the high stored energy caused by the operation of pyramidal slip, DDRX was mainly contributed to the formation of new fine grains. However, in the later stage of deformation, the DRX mechanism changed from DDRX to CDRX. In the 90° sample, although DDRX featured by grain boundary bulging occurred, the main DRX mechanism was CDRX in the whole deformation processing. Moreover, texture induced hardening in the early stage of deformation hides the softening induced by DDRX.

36 MATERIALS SCIENCE↗

Long-term exposure to endogenous levels of tributyltin decreases GluR2 expression and increases neuronal vulnerability to glutamate

Tributyltin (TBT), an endocrine-disrupting chemical, has been used commercially as a heat stabilizer, agricultural pesticide and component of antifouling paints. In this study, we investigated the effect of long-term exposure to endogenous levels of TBT on neuronal glutamate receptors. Cultured rat cortical neurons were exposed to 1-50 nM TBT for 9 days (from day 2 to day 10 in vitro). The number of neurons was reduced by long-term exposure to 50 nM TBT, but not to 1-20 nM TBT. Long-term exposure to 20 nM TBT decreased the mRNA expression of glutamate receptors NR1, NR2A, GluR1 and GluR2, and increased that of NR2B, GluR3 and GluR4. GluR2 protein was also reduced by long-term exposure to TBT. Because AMPA receptor lacking GluR2 exhibits Ca{sup 2+} permeability, we investigated whether Ca{sup 2+} influx or glutamate toxicity was affected. Indeed, glutamate-induced Ca{sup 2+} influx was increased in TBT-treated neurons. Consistent with this, neurons became more susceptible to glutamate toxicity as a result of long-term exposure to TBT and this susceptibility was abolished by an antagonist of GluR2-lacking AMPA receptor. Thus, it is suggested that long-term exposure to endogenous levels of TBT induces a decrease of GluR2 protein, causing neurons become more susceptible to glutamate toxicity.

60 APPLIED LIFE SCIENCES↗

Large electric-induced pyroelectric properties in (Pb{sub 0.87}La{sub 0.02}Ba{sub 0.1}) (Zr{sub 0.7}Sn{sub 0.24}Ti{sub 0.06})O{sub 3} antiferroelectric ceramics with excess PbO

(Pb{sub 0.87}La{sub 0.02}Ba{sub 0.1}) (Zr{sub 0.7}Sn{sub 0.24}Ti{sub 0.06})O{sub 3} (PLBZST) antiferroelectric ceramics with the addition of 0-9 wt. % excess PbO were fabricated by the conventional solid-state reaction process, and their microstructure, dielectric, and pyroelectric properties were systemically investigated. When excess PbO content was less than 9 wt. %, two pyrochlore phases were formed along with the perovskite phase. Compared with common specimens, PLBZST antiferroelectric ceramics with excess PbO exhibited a higher pyroelectric coefficient and a lower dielectric loss, which are beneficial for the development of pyroelectric devices. Around the Curie temperature, as the excess PbO increased from 0 wt. % to 9 wt. %, PLBZST ceramics' pyroelectric coefficient increased from 1600 {mu}C/m{sup 2}K to 4000 {mu}C/m{sup 2}K, and the figure of merit increased from 40 x 10{sup -5} Pa{sup -0.5} to 140 x 10{sup -5} Pa{sup -0.5} under a 400 V/mm dc field. The largest figure of merit of 200 x 10{sup -5} Pa{sup -0.5}, which is about 8 times higher than that of conventional phase transition materials barium strontium titanate (BST), was obtained in PLBZST ceramics with 6 wt. % excess PbO when a 600 V/mm dc bias field was applied. Therefore, improvement of pyroelectric property is beneficial for the development of infrared detectors.

36 MATERIALS SCIENCE↗

Band alignment at the Cu{sub 2}ZnSn(S{sub x}Se{sub 1-x}){sub 4}/CdS interface

Energy band alignments between CdS and Cu{sub 2}ZnSn(S{sub x}Se{sub 1-x}){sub 4} (CZTSSe) grown via solution-based and vacuum-based deposition routes were studied as a function of the [S]/[S+Se] ratio with femtosecond laser ultraviolet photoelectron spectroscopy, photoluminescence, medium energy ion scattering, and secondary ion mass spectrometry. Band bending in the underlying CZTSSe layer was measured via pump/probe photovoltage shifts of the photoelectron spectra and offsets were determined with photoemission under flat band conditions. Increasing the S content of the CZTSSe films produces a valence edge shift to higher binding energy and increases the CZTSSe band gap. In all cases, the CdS conduction band offsets were spikes.

36 MATERIALS SCIENCE↗

Synthesis, transport properties, and electronic structure of Cu{sub 2}CdSnTe{sub 4}

A new stannite phase was synthesized and its temperature dependent transport properties were investigated. Cu{sub 2}CdSnTe{sub 4} possesses strong p-type conduction, while the temperature dependence of the thermal conductivity exhibits typical dielectric behavior. Electronic structure calculations allowed for a description of the transport characteristics in terms the energy band structure, density of states, and Fermi surface. The potential for thermoelectric applications is also discussed.

36 MATERIALS SCIENCE↗

Atom-probe tomographic study of interfaces of Cu{sub 2}ZnSnS{sub 4} photovoltaic cells

The heterophase interfaces between the CdS buffer layer and the Cu{sub 2}ZnSnS{sub 4} (CZTS) absorption layers are one of the main factors affecting photovoltaic performance of CZTS cells. We have studied the compositional distributions at heterophase interfaces in CZTS cells using three-dimensional atom-probe tomography. The results demonstrate: (a) diffusion of Cd into the CZTS layer; (b) segregation of Zn at the CdS/CZTS interface; and (c) a change of oxygen and hydrogen concentrations in the CdS layer depending on the heat treatment. Annealing at 573 K after deposition of CdS improves the photovoltaic properties of CZTS cells probably because of the formation of a heterophase epitaxial junction at the CdS/CZTS interface. Conversely, segregation of Zn at the CdS/CZTS interface after annealing at a higher temperature deteriorates the photovoltaic properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Trap and recombination centers study in sprayed Cu₂ZnSnS₄ thin films

In this work, a study of trap and recombination center properties in polycrystalline Cu₂ZnSnS₄ thin films is carried out in order to understand the poor performance in Cu₂ZnSnS₄ thin film solar cells. Thermally stimulated current has been studied in Cu₂ZnSnS₄ deposited by pneumatic spray pyrolysis method using various heating rates, in order to gain information about trap centers and/or deep levels present within the band-gap of this material. A set of temperature-dependent current curves revealed three levels with activation energy of 126±10, 476±25, and 1100±100 meV. The possible nature of the three levels found is presented, in which the first one is likely to be related to Cu{sub Zn} antisites, while second and third to Sn vacancies and Sn{sub Cu} antisites, respectively. The values of frequency factor, capture cross section, and trap concentration have been determined for each center.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Site-resolved oxygen K-edge ELNES of the layered double perovskite La{sub 2}CuSnO{sub 6}

Electron energy-loss spectroscopy (EELS) combined with scanning transmission electron microscopy (STEM) allows for the investigation of the local electronic structure with atomic column resolution, owing to the development of spherical aberration correctors. In the present research, we report B-site-resolved oxygen K-edge energy-loss near-edge structure (ELNES) measured from a double perovskite La{sub 2}CuSnO{sub 6} (LCSO) using STEM-EELS. There are two kinds of BO{sub 6} (B=Sn and Cu) octahedrons, arranged in layers in the LCSO crystal. The observed site-resolved oxygen K-edge ELNES showed different features reflecting local chemical bonding around the Sn and Cu ions. In particular, it is demonstrated that the local electronic structure in the distorted CuO{sub 6} octahedron caused by the Jahn-Teller effect can be detected by site-resolved ELNES.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗