Search NASA⌕ Search

SEARCH · Search NASA

Results for “TRUEX PROCESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Iodine Speciation Across the Length of the Hanford 200-UP-1 Operable Unit Radioiodine Plume and Biogeochemical Drivers of Speciation - 17270

In 1943, construction began on the first of nine nuclear reactors at the Hanford Site to produce plutonium for the development of atomic weapons for the Manhattan Project during World War II and throughout the Cold War. Over a production period lasting from 1944 to 1987, approximately 110,000 tons of nuclear fuel was processed. During the production period, billions of gallons of liquid nuclear waste and millions of tons of solid waste were produced. Approximately 4.7 Ci of radioiodine (I-129) was discharged to liquid disposal sites, during disposition of the waste. Following percolation of the liquid waste through the vadose zone, three large I-129 groundwater plumes have formed beneath Central Plateau Facilities including both 200 East and 200 West Areas. Analysis of I-129 plumes in the 200-ZP-1 Operable Unit (OU) (200 West Area) showed iodine speciation that was dominated by iodate even though iodide was thought to be dominant species in waste. Experimental results demonstrated that iodate interacts with calcite via a co-precipitation and/or adsorption mechanism. From sorption experiments performed on Hanford sediments, iodate interacted more strongly than iodide during adsorption experiments. These results would indicate that iodate migration would be retarded compared to iodide, but results from groundwater samples obtained from eight wells in the 200 ZP-1 OU did not support this hypothesis. Due to different chemical processes used during plutonium processing, iodine species in other plumes such as in the 200-UP-1 OU (200 West Area) may be different. In addition, species distribution may change longitudinally between the source area and the distal end of the plume. Groundwater samples will be taken at a location near the source, in the middle of the plume and at the distal end of the plume. These samples will be analyzed for iodine speciation using ion chromatography coupled to an inductively coupled plasma mass spectrometer. Results from the different samples will be compared to give an initial determination of species distribution at different locations along the plume. Data generated from these samples can then be used to inform the conceptual model that is being developed for iodine as part of an evaluation of remediation options for the 200-UP-1 OU. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Combining octyl(phenyl)-N,N-diisobutyl-carbamoylmethylphosphine oxide and bis-(2-ethylhexyl)phosphoric acid extractants for recovering transuranic elements from irradiated nuclear fuel

Advanced concepts for closing the nuclear fuel cycle include separating Am and Cm from other fuel components. Separating these elements from the lanthanide elements at an industrial scale remains a significant technical challenge. We describe here a chemical system in which a neutral extractant--octyl(phenyl)-N,N-diisobutyl-carbamoylmethyl-phosphine oxide (CMPO)--is combined with an acidic extractant--bis-(2-ethylhexyl)phosphoric acid (HDEHP)--to form a single process solvent (with dodecane as the diluent) for separating Am and Cm from the other components of irradiated nuclear fuel. Continuous variation experiments in which the relative CMPO and HDEHP concentrations are varied indicate a synergistic relationship between the two extractants in the extraction of Am from buffered diethylenetriaminepentaacetic acid (DTPA) solutions. A solvent mixture consisting or 0.1 M CMPO + 1 M HDEHP in dodecane offers acceptable extraction efficiency for the trivalent lanthanides and actinides from 1 M HNO3 while maintaining good lanthanide/actinide separation factors in the stripping regime (buffered DTPA solutions with pH 3.5 to 4). Using citrate buffer instead of lactate buffer results in improved lanthanide/actinide separation factors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Integrated program for department of energy environmental management office of soil and groundwater remediation - 15426

The subsurface problems that remain at the U.S. Department of Energy (DOE) Office of Environmental Management (EM) sites are technically complex and the costs to complete the cleanup mission are expected to range from $17 billion to $21 billion. There is growing recognition that conventional remedies will not meet regulatory goals at a number of sites and alternative approaches will be required. To address the challenge, the EM Office of Soil and Groundwater Remediation created an integrated program to develop innovative scientific and technical in conjunction with engagement of stakeholders, regulators, and the public. The integrated program provides a holistic approach to assess the risk associated with the remaining challenges facing EM and develop solutions that achieve remediation goals and protect human health and the environment. The integrated program uses a systems-based framework for achieving environmental remediation goals. The framework is based on developing and updating a site conceptual model and includes steps to 1) provide the technical basis for remedial actions, 2) assessments of potential remedies, and 3) implementation and management of remedies to achieve site restoration goals. The Office of Soil and Groundwater remediation defines research and development needed to successfully define and apply the framework. Research opportunities and targets are identified in characterization and conceptual model development, predictions of site conditions, remediation, monitoring, and remediation decision support. Characterization and quantification of key subsurface uncertainties is needed to support conceptual model development, identify contaminant source zones, quantify the flux of contaminants from source terms to points of compliance, and characterize controlling processes for remediation approaches including natural attenuation. Predictive analyses are needed to support development of remediation endpoints, select and design active and in situ or passive remedies, assess remedy performance, and predict long-term contaminant behavior for design of monitoring systems. Advancements are needed to support adaptive remediation approaches and to develop long-term contaminant management strategies for complex sites, such as effective in situ treatment methods for long-lived contaminants ({sup 99}Tc, {sup 129}I, U, Hg, etc.). Monitoring tools and approaches are needed to evaluate remedy performance and plume behavior and decision support methods are needed to quantitatively evaluate remediation alternatives. The Office of Soil and Groundwater Remediation leverages scientific understanding provided through partnerships with the DOE Office of Science, the Department of Defense, and Environmental Protection Agency. These partnerships are helping EM develop scientific understanding and technologies for implementing the assessment framework. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Field Test of Enhanced Remedial Amendment Delivery Using a Shear-Thinning Fluid

Heterogeneity of hydraulic properties in aquifers may lead to contaminants residing in lower-permeability zones where it is difficult to deliver remediation amendments using conventional injection processes. The focus of this effort is to examine use of a shear-thinning fluid (STF) to improve the uniformity of remedial amendment distribution within a heterogeneous aquifer. Previous studies have demonstrated the significant potential of STFs for improving remedial amendment delivery in heterogeneous aquifers, but quantitative evaluation of these improvements from field applications are lacking. A field-scale test was conducted that compares data from successive injection of a tracer in water followed by injection of a tracer in a STF to evaluate the impact of the STF on tracer distribution uniformity in the presence of permeability contrasts within the targeted injection zone. Data from tracer breakthrough at multiple depth-discrete monitoring intervals and electrical resistivity tomography showed that inclusion of STF in the injection solution slowed movement in high-permeability pathways, improved delivery of amendment to low-permeability materials, and resulted in better uniformity in injected fluid distribution within the targeted treatment zone.

bioremediation, groundwater↗

Field Test of Enhanced Remedial Amendment Delivery Using a Shear-Thinning Fluid

Heterogeneity of hydraulic properties in aquifers may lead to contaminants residing in lower-permeability zones where it is difficult to deliver remediation amendments using conventional injection processes. The focus of this effort is to examine use of a shear-thinning fluid (STF) to improve the uniformity of remedial amendment distribution within a heterogeneous aquifer. Previous studies have demonstrated the significant potential of STFs for improving remedial amendment delivery in heterogeneous aquifers, but quantitative evaluation of these improvements from field applications are lacking. A field-scale test was conducted that compares data from successive injection of a tracer in water followed by injection of a tracer in a STF to evaluate the impact of the STF on tracer distribution uniformity in the presence of permeability contrasts within the targeted injection zone. Data from tracer breakthrough at multiple depth-discrete monitoring intervals and electrical resistivity tomography showed that inclusion of STF in the injection solution slowed movement in high-permeability pathways, improved delivery of amendment to low-permeability materials, and resulted in better uniformity in injected fluid distribution within the targeted treatment zone.

54 ENVIRONMENTAL SCIENCES↗

Independent Technical Review of the Interim Measure Alternatives Analysis for Chromium Contamination in Groundwater at Los Alamos National Laboratory, New Mexico

The two example scenarios described in the report are built around either boundary condition modification or pump and treat. Boundary condition modification focuses primarily on aggressively reducing the driving force of water that is moving Cr(VI) through the subsurface system at LANL, carefully monitoring hydrologic responses, and quantifying natural attenuation rates in key portions of the plume. This scenario would provide a measurable impact on subsurface hydrology using relatively low-cost methods and emphasizing data collection to support the CME process. The second scenario focuses on active removal of Cr(VI) using pump and treat combined with a variety of data collection activities. This scenario would also include some boundary condition modification and would provide more timely impacts in the mid-plume area. However, it is substantially more costly and faces more significant logistical, regulatory, and data interpretation hurdles. Because of these issues and challenges, the pump and treat based scenario would be appropriate primarily for the case in which Cr(VI) removal and more rapid near-term impacts in the mid-plume are considered to be high, overriding priorities. We recommend careful consideration of the advantages and disadvantages of different “combined remedy” IM scenarios and urge the LANL team and its regulators and stakeholders to assemble and select a scenario that is implementable and that provides useful and actionable data to inform and support the CME. Both of the example scenarios presented meet these criteria.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Scaling gas-phase treatment of vadose-zone contaminants for field application at the Hanford site - 15133

In situ vadose zone remediation approaches are being evaluated as potential options to mitigate the transport of inorganic and radionuclide contaminants from the vadose zone to the groundwater at the U.S. Department of Energy's Hanford site. Some of the candidate approaches are based on changing the contaminant or subsurface conditions in a way that slows downward migration of the contaminants through the vadose zone using amendments delivered in the gas-phase. Ammonia-vapor treatment of uranium relies on induced sediment dissolution and precipitation processes that decrease the amount of mobile uranium in the vadose zone. Previous laboratory studies have demonstrated the decrease in uranium mobility caused by ammonia treatment. As part of development efforts for the ammonia technology, scale-up issues were identified and have been addressed through a series of laboratory and modeling efforts. Key scale-up elements are scoping calculations to support treatment design and understanding ammonia transport. Recent research has extended the concept of geochemical manipulation by ammonia to investigate a combined-gas treatment for sequestering Tc-99 in the vadose zone. The technique uses a combination of geochemical Tc-99 reduction with hydrogen sulfide gas and induced sediment mineral dissolution and precipitation with ammonia vapor, creating conditions for deposition of stable precipitates that decrease the mobility of Tc-99. Laboratory experiments have demonstrated the effectiveness of this treatment under a variety of operational and sediment conditions important to the scale-up and evaluation of potential addition field applications. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Guidance for Monitoring Passive Groundwater Remedies Over Extended Time Scales

Passive remediation can be appropriate where natural processes and actions such as institutional controls mitigate exposure to contaminated groundwater, achieving remedial action objectives and protectiveness of human health and the environment. Monitored natural attenuation (MNA) is a prevalent passive remediation strategy supported by a regulatory framework and monitoring design guidance. MNA can also be used after active remediation has been completed (e.g., pump-and-treat) as a polishing step to reach ultimate remedial action objectives. However, MNA and existing monitoring guidance primarily target situations where the remedial action objectives are met within a few decades. When timescales for passive remediation extend to many decades, a corresponding change in monitoring strategy is needed to adapt to the extended time scale. This document provides guidance for implementing an extended-scale monitoring (ESM) approach appropriate for long-duration passive remediation. Extended-scale is defined in this document with respect to time (i.e., a long duration of remediation) and a large enough physical scale such that receptors will not be impacted within the remediation timeframe.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Determination of Water Saturation in Relatively Dry Porous Media Using Gas-phase Tracer Tests

Soil desiccation (drying), involving water evaporation induced by dry air injection and extraction, is a potentially robust remediation process to slow migration of inorganic or radionuclide contaminants through the vadose zone. The application of gas-phase partitioning tracer tests has been proposed as a means to estimate initial water volumes and to monitor the progress of the desiccation process at pilot-test and field sites. In this paper, tracer tests have been conducted in porous medium columns with various water saturations using sulfur hexafluoride as the conservative tracer and tricholorofluoromethane and difluoromethane as the water-partitioning tracers. For porous media with minimal silt and/or organic matter fractions, tracer tests provided reasonable saturation estimates for saturations close to zero. However, for sediments with significant silt and/or organic matter fractions, tracer tests only provided satisfactory results when the water saturation was at least 0.1 - 0.2. For dryer conditions, the apparent tracer retardation increases due to air – soil sorption, which is not included in traditional retardation coefficients derived from advection-dispersion equations accounting only for air – water partitioning and water – soil sorption. Based on these results, gas-phase partitioning tracer tests may be used to determine initial water volumes in sediments, provided the initial water saturations are sufficiently large. However, tracer tests are not suitable for quantifying moisture content in desiccated sediments.

54 ENVIRONMENTAL SCIENCES↗

Hanford 100-D Area Biostimulation Treatability Test Results

Pacific Northwest National Laboratory conducted a treatability test designed to demonstrate that in situ biostimulation can be applied to help meet cleanup goals in the Hanford Site 100-D Area. In situ biostimulation has been extensively researched and applied for aquifer remediation over the last 20 years for various contaminants. In situ biostimulation, in the context of this project, is the process of amending an aquifer with a substrate that induces growth and/or activity of indigenous bacteria for the purpose of inducing a desired reaction. For application at the 100-D Area, the purpose of biostimulation is to induce reduction of chromate, nitrate, and oxygen to remove these compounds from the groundwater. The in situ biostimulation technology is intended to provide supplemental treatment upgradient of the In Situ Redox Manipulation (ISRM) barrier previously installed in the Hanford 100-D Area and thereby increase the longevity of the ISRM barrier. Substrates for the treatability test were selected to provide information about two general approaches for establishing and maintaining an in situ permeable reactive barrier based on biological reactions, i.e., a biobarrier. These approaches included 1) use of a soluble (miscible) substrate that is relatively easy to distribute over a large areal extent, is inexpensive, and is expected to have moderate longevity; and 2) use of an immiscible substrate that can be distributed over a reasonable areal extent at a moderate cost and is expected to have increased longevity.

54 ENVIRONMENTAL SCIENCES↗

Refining Groundwater Monitoring Approaches Through an Objectives-Driven Process - 16333

Groundwater monitoring is conducted throughout the groundwater remediation process, from initial site characterization through demonstration of cleanup objectives attainment. The DOE uses the groundwater monitoring data to define plumes, manage ongoing remediation, and determine how close the contamination levels are to meeting an endpoint criteria, such as a drinking water standard. Due to the expense of groundwater sampling and analysis, the DOE Office of Environmental Management compiled a synopsis of monitoring technologies and approaches, and defined opportunities for improving environmental remediation monitoring. This information included techniques to optimize and streamline groundwater monitoring. At the Hanford Site, years of extensive groundwater monitoring have been applied to support characterization and remedy-selection activities. Continuation of this monitoring intensity would be costly and would need to be reviewed in the context of future activities for groundwater remedy implementation. A structured review of monitoring plans is underway and has identified significant potential changes to the monitoring approach. These changes have been developed based on careful definition of monitoring objectives and consideration of innovative and targeted techniques to gather the appropriate data for remedy performance monitoring and transition to longer-term monitoring and closure. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

SOIL DESICCATION TECHNIQUES STRATEGIES FOR IMMOBILIZATION OF DEEP VADOSE CONTAMINANTS AT THE HANFORD CENTRAL PLATEAU

Deep vadose zone contamination poses some of the most difficult remediation challenges for the protection of groundwater at the Hanford Site where processes and technologies are being developed and tested for use in the on-going effort to remediate mobile contamination in the deep vadose zone, the area deep beneath the surface. Historically, contaminants were discharged to the soil along with significant amounts of water, which continues to drive contaminants deeper in the vadose zone toward groundwater. Soil desiccation is a potential in situ remedial technology well suited for the arid conditions and the thick vadose zone at the Hanford Site. Desiccation techniques could reduce the advance of contaminants by removing the pore water to slow the rate of contaminants movement toward groundwater. Desiccation technologies have the potential to halt or slow the advance of contaminants in unsaturated systems, as well as aid in reduction of contaminants from these same areas. Besides reducing the water flux, desiccation also establishes capillary breaks that would require extensive rewetting to resume pore water transport. More importantly, these techniques have widespread application, whether the need is to isolate radio nuclides or address chemical contaminant issues. Three different desiccation techniques are currently being studied at Hanford.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Pore-Water Extraction Intermediate-Scale Laboratory Experiments and Numerical Simulations

A series of flow cell experiments was conducted to demonstrate the process of water removal through pore-water extraction in unsaturated systems. In this process, a vacuum (negative pressure) is applied at the extraction well establishing gas and water pressure gradients towards the well. The gradient may force water and dissolved contaminants, such as 99Tc, to move towards the well. The tested flow cell configurations consist of packings, with or without fine-grained well pack material, representing, in terms of particle size distribution, subsurface sediments at the SX tank farm. A pore water extraction process should not be considered to be equal to soil vapor extraction because during soil vapor extraction, the main goal may be to maximize gas removal. For pore water extraction systems, pressure gradients in both the gas and water phases need to be considered while for soil vapor extraction purposes, gas phase flow is the only concern. In general, based on the limited set (six) of flow experiments that were conducted, it can be concluded that pore water extraction rates and cumulative outflow are related to water content, the applied vacuum, and the dimensions of the sediment layer providing the extracted water. In particular, it was observed that application of a 100-cm vacuum (negative pressure) in a controlled manner leads to pore-water extraction until the water pressure gradients towards the well approach zero. Increased cumulative outflow was obtained with an increase in initial water content from 0.11 to 0.18, an increase in the applied vacuum to 200 cm, and when the water-supplying sediment was not limited. The experimental matrix was not sufficiently large to come to conclusions regarding maximizing cumulative outflow.

54 ENVIRONMENTAL SCIENCES↗

Three-Dimensional Simulation of Volatile Organic Compound Mass Flux from the Vadose Zone to Groundwater

Low permeability layers of the vadose zone containing volatile organic compounds (VOCs) may persist as source zones for long time periods and may provide contamination to groundwater. At sites with low recharge rates, where vapor migration is the dominant transport process, the impact of vadose zone sources on groundwater may be difficult to assess. Typical assessment methods include one-dimensional numerical and analytical techniques. The one-dimensional approaches only consider groundwater coupling options through boundary conditions at the water table and may yield artificially high mass flux results when transport is assumed to occur by gas-phase diffusion between a source and an interface with a zero concentration boundary condition. Improvements in mass flux assessments for VOCs originating from vadose zone sources may be obtained by coupling vadose zone gas transport and dissolved contaminant transport in the saturated zone and by incorporating the inherent three-dimensional nature of gas-phase transport, including the potential of density-driven advection. This paper describes a series of three-dimensional simulations using data from the U.S. Department of Energy’s Hanford Site, where carbon tetrachloride is present in a low permeability zone about 30 m above the groundwater. Results show that, for most cases, only a relatively small amount of the contaminant emanating from the source zone partitions into the groundwater and that density-driven advection is only important when relatively high source concentrations are considered.

54 ENVIRONMENTAL SCIENCES↗

Delivery of Vegetable Oil Suspensions in a Shear Thinning Fluid for Enhanced Bioremediation

In situ anaerobic biological processes are widely applied for dechlorination of chlorinated solvents in groundwater. A wide range of organic substrates have been tested and applied to support the dechlorination processes. Vegetable oils are a promising substrate and have been shown to induce effective dechlorination, have limited geochemical impacts, and good longevity. Distribution of vegetable oil in the subsurface, because it is a non-aqueous phase material, has typically been addressed by creating emulsified oil solutions. In this study, inexpensive waste vegetable oils were suspended in a xanthan gum solution, a shear-thinning fluid, as an alternative oil delivery mechanism. The stability, oil droplet size and distribution, and rheological behavior of the oil suspensions that are created in the xanthan solutions were studied in batch experiments. The injectability of the suspensions and oil distribution in porous medium were evaluated in column tests. Numerical modeling of the oil droplet transport and distribution in porous media was conducted to help interpret the column-test data. Batch studies showed that simple mixing of vegetable oil and xanthan solution produced stable suspensions of the oil as micron-size droplets. The mixture rheology retains shear-thinning properties that facilitate improved uniformity of substrate distribution in heterogeneous aquifers. Column tests demonstrated successful injection of the vegetable oil suspension into porous medium. This study provided evidence that vegetable oil suspensions in xanthan are a potential substrate to support in situ anaerobic bioremediation with favorable injection properties.

Zhong, Lirong↗

A Rapid Decision Support Tool for Estimating Impacts of a Vadose Zone Volatile Organic Compound Source on Groundwater and Soil Gas

Diminishing rates of subsurface volatile contaminant removal by soil vapor extraction (SVE) oftentimes warrants an in‐depth performance assessment to guide remedy decision‐making processes. Such a performance assessment must include quantitative approaches to better understand the impact of remaining vadose zone contamination on soil gas and groundwater concentrations. The spreadsheet‐based Soil Vapor Extraction Endstate Tool (SVEET) software functionality has recently been expanded to facilitate quantitative performance assessments. The updated version, referred to as SVEET2, includes expansion of the input parameter ranges for describing a site (site geometry, source characteristics, etc.), an expanded list of contaminants, and incorporation of elements of the Vapor Intrusion Estimation Tool for Unsaturated‐zone Sources software to provide soil gas concentration estimates for use in vapor intrusion evaluation. As part of the update, SVEET2 was used to estimate the impact of a tetrachloroethene (PCE) vadose zone source on groundwater concentrations, comparing SVEET2 results to field‐observed values at an undisclosed site where SVE was recently terminated. PCE concentrations from three separate monitoring wells were estimated by SVEET2 to be within the range of 6.0–6.7 μg/L, as compared to actual field concentrations that ranged from 3 to 11 μg/L PCE. These data demonstrate that SVEET2 can rapidly provide representative quantitative estimates of impacts from a vadose zone contaminant source at field sites. Finally, in the context of the SVE performance assessment, such quantitative estimates provide a basis to support remedial and/or regulatory decisions regarding the continued need for vadose zone volatile organic compound remediation or technical justification for SVE termination, which can significantly reduce the cost to complete for a site.

54 ENVIRONMENTAL SCIENCES↗

Desiccation of unsaturated porous media: Intermediate-scale experiments and numerical simulation

Soil desiccation (drying) is recognized as a potentially robust vadose zone remediation process involving water evaporation induced by air injection and extraction. Desiccation has the potential to immobilize contaminants and could potentially improve access for other gas-phase treatments by reducing water saturation and therefore increasing sediment gas-phase permeability. Before this technology could be deployed in the field, concerns related to energy limitations, osmotic effects, and potential contaminant remobilization after rewetting need to be addressed. A series of detailed wedge-shaped, intermediate-scale laboratory experiments in unsaturated homogeneous and simple heterogeneous systems was conducted to improve the understanding of the impact of energy balance issues on soil desiccation. The experiments were simulated with the multifluid flow simulator STOMP, using independently obtained hydraulic and thermal porous medium properties. In all the experiments, the injection of dry air proved to be an effective means for removing essentially all moisture from the test media. Evaporative cooling was observed which generally decreased with increased distance from the gas inlet chamber. Observations of temperature in fine-grained sands in the heterogeneous systems show two local temperature minima associated with the cooling. The first one occurs because of evaporation in the adjacent medium-grained sand whereas the second minimum is attributed to evaporative cooling in the fine-grained sand itself. Results of the laboratory tests were simulated accurately when thermal properties of the flow cell walls and insulation material were taken into account, indicating that the proper physics were incorporated into the simulator.

54 ENVIRONMENTAL SCIENCES↗

Fundamental Drop Dynamics and Mass Transfer Experiments to Support Solvent Extraction Modeling Efforts

In support of the Nuclear Energy Advanced Modeling Simulation Safeguards and Separations (NEAMS SafeSep) program, the Idaho National Laboratory (INL) worked in collaboration with Los Alamos National Laboratory (LANL) to further a modeling effort designed to predict mass transfer behavior for selected metal species between individual dispersed drops and a continuous phase in a two phase liquid-liquid extraction (LLE) system. The purpose of the model is to understand the fundamental processes of mass transfer that occur at the drop interface. This fundamental understanding can be extended to support modeling of larger LLE equipment such as mixer settlers, pulse columns, and centrifugal contactors. The work performed at the INL involved gathering the necessary experimental data to support the modeling effort. A custom experimental apparatus was designed and built for performing drop contact experiments to measure mass transfer coefficients as a function of contact time. A high speed digital camera was used in conjunction with the apparatus to measure size, shape, and velocity of the drops. In addition to drop data, the physical properties of the experimental fluids were measured to be used as input data for the model. Physical properties measurements included density, viscosity, surface tension and interfacial tension. Additionally, self diffusion coefficients for the selected metal species in each experimental solution were measured, and the distribution coefficient for the metal partitioning between phases was determined. At the completion of this work, the INL has determined the mass transfer coefficient and a velocity profile for drops rising by buoyancy through a continuous medium under a specific set of experimental conditions. Additionally, a complete set of experimentally determined fluid properties has been obtained. All data will be provided to LANL to support the modeling effort.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗