Search NASA⌕ Search

SEARCH · Search NASA

Results for “Transition metal oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Real-time Measurements of Complex Transition Metal Oxide Nanostructure Growth (Year 3 - Final Technical Report-GaTech-MIT)

The project, a collaboration between the Ross Lab at MIT and the Filler Lab at Georgia Tech, aimed to combine in situ microscopy and spectroscopy measurements to answer fundamental questions about the physics and chemistry governing the bottom-up vapor-solid-liquid (VLS) growth of one-dimensional (1-D) functional oxides. This work supported one PhD student and 1 postdoc. One paper has been published and 5 others are in preparation. To date, this work has been presented at 5 conferences.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Transition Metal Oxide Powders Made from Flame Spray Pyrolysis for Li-Ion Batteries

In 2012 the U.S. Department of Energy introduced its EV Everywhere Grand Challenge, with a stated goal of enabling “plug-in electric vehicles (PEVs) that are as affordable and convenient for the American family as gasoline-powered vehicles by 2022.” This requires a reduction in battery costs from the current $500/kWh to around $125/kWh. Most approaches have been to eliminate vehicle weight through lightweighting and to improve the energy density of battery materials. But what if we were able to just make the materials cheaper instead? To this end we introduce a green, low-cost method of producing cathode materials using an integrated flame spray pyrolysis process.

25 ENERGY STORAGE↗
DOE OSTI2025

Rational Selection of Transition-Metal Oxide Electrocatalysts from Structure Electronic Structure-Activity Relations: The Role of Defects, Strain, and Sub-Surface Layering

This BES research investigates the physicochemical properties of metal oxides and how they affect electrocatalytic functionalities. The goal is to develop a predictive framework for realizing top-performing electrocatalytic materials for energy-critical reactions. The hypothesis is that well-defined thin films allow detailed mapping of structural-activity relationships because flat surfaces are more straightforward to characterize. Furthermore, the well-defined nature of thin-film metal oxides allows precise tuning of structural and chemical variables for structure-activity-relationship mapping. The proposed research has two technical objectives. The first is to experimentally assess whether the binding energies of surface oxygen can serve as an activity descriptor for oxygen electrocatalysis on metal oxides and then how to control them by tuning the structure and chemical variables. The second is to find the rate-limiting process in oxygen electrocatalysis and other small-molecule reactions. Similar mechanistic insights have been developed on well-defined platinum surfaces but not yet on oxides. This research addresses this gap and uses electrochemistry and X-ray photoemission spectroscopy to study oxide surface chemistry. The obtained insights are collectively analyzed to reveal how the oxides’ structural and chemical variables affect kinetics and can be used to design more active electrocatalysts for energy-critical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Real-time Measurements of Complex Transition Metal Oxide Nanostructure Growth (Final Technical Report)

This is the final technical report for a collaborative project between the Ross Lab at MIT and the Filler Lab at Georgia Tech. The project aimed to combine in situ microscopy and spectroscopy measurements to answer fundamental questions about the physics and chemistry governing the bottom-up vapor-solid-liquid (VLS) growth of one-dimensional (1-D) functional oxides. This work supported one PhD student and 1 postdoc. One paper has been published and 5 others are in preparation. To date, this work has been presented at 5 conferences.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A quantum material spintronic resonator

In a spintronic resonator a radio-frequency signal excites spin dynamics that can be detected by the spin-diode effect. Such resonators are generally based on ferromagnetic metals and their responses to spin torques. New and richer functionalities can potentially be achieved with quantum materials, specifically with transition metal oxides that have phase transitions that can endow a spintronic resonator with hysteresis and memory. Here we present the spin torque ferromagnetic resonance characteristics of a hybrid metal-insulator-transition oxide/ ferromagnetic metal nanoconstriction. Our samples incorporate V 2 O 3 , with Ni, Permalloy (Ni 80 Fe 20 ) and Pt layers patterned into a nanoconstriction geometry. The first order phase transition in V 2 O 3 is shown to lead to systematic changes in the resonance response and hysteretic current control of the ferromagnetic resonance frequency. Further, the output signal can be systematically varied by locally changing the state of the V 2 O 3 with a dc current. These results demonstrate new spintronic resonator functionalities of interest for neuromorphic computing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Interlayers and associated systems, devices, and methods

Embodiments related to interlayers (e.g., interlayers comprising a transition metal oxide, a transition metal oxynitride, and/or a transition metal nitride) and associated systems, devices (e.g., photovoltaic devices), and methods are disclosed. In some embodiments, a system for exciton transfer includes a substrate including an inorganic semiconductor. An interlayer may be disposed on the substrate, and a layer including a material that undergoes singlet exciton fission when exposed to electromagnetic radiation may be disposed on the interlayer. The interlayer may be disposed between the substrate and the layer. In some embodiments, a method for manufacturing a system for exciton transfer involves depositing an interlayer onto a substrate that includes an inorganic semiconductor. The method may also include depositing a layer including a material that undergoes singlet exciton fission when exposed to electromagnetic radiation onto the interlayer.

Baldo, Marc A.↗
DOE OSTI2024

A Review of Nanocarbon-Based Anode Materials for Lithium-Ion Batteries

Renewable and non-renewable energy harvesting and its storage are important components of our everyday economic processes. Lithium-ion batteries (LIBs), with their rechargeable features, high open-circuit voltage, and potential large energy capacities, are one of the ideal alternatives for addressing that endeavor. Despite their widespread use, improving LIBs’ performance, such as increasing energy density demand, stability, and safety, remains a significant problem. The anode is an important component in LIBs and determines battery performance. To achieve high-performance batteries, anode subsystems must have a high capacity for ion intercalation/adsorption, high efficiency during charging and discharging operations, minimal reactivity to the electrolyte, excellent cyclability, and non-toxic operation. Group IV elements (Si, Ge, and Sn), transition-metal oxides, nitrides, sulfides, and transition-metal carbonates have all been tested as LIB anode materials. However, these materials have low rate capability due to weak conductivity, dismal cyclability, and fast capacity fading owing to large volume expansion and severe electrode collapse during the cycle operations. Contrarily, carbon nanostructures (1D, 2D, and 3D) have the potential to be employed as anode materials for LIBs due to their large buffer space and Li-ion conductivity. However, their capacity is limited. Blending these two material types to create a conductive and flexible carbon supporting nanocomposite framework as an anode material for LIBs is regarded as one of the most beneficial techniques for improving stability, conductivity, and capacity. This review begins with a quick overview of LIB operations and performance measurement indexes. It then examines the recently reported synthesis methods of carbon-based nanostructured materials and the effects of their properties on high-performance anode materials for LIBs. These include composites made of 1D, 2D, and 3D nanocarbon structures and much higher Li storage-capacity nanostructured compounds (metals, transitional metal oxides, transition-metal sulfides, and other inorganic materials). The strategies employed to improve anode performance by leveraging the intrinsic features of individual constituents and their structural designs are examined. The review concludes with a summary and an outlook for future advancements in this research field.

25 ENERGY STORAGE↗
DOE OSTI2024

High-temperature thermochemical energy storage materials using doped magnesium-transition metal spinel oxides

High-temperature thermochemical energy storage materials using doped magnesium-transition metal spinel oxides are provided. —transition metal spinel oxides, such as magnesium manganese oxide (MgMn) 3 O 4 , are promising candidates for high-temperature thermochemical energy storage applications. However, the use of these materials has been constrained by the limited extent of their endothermic reaction. Embodiments described herein provide for doping magnesium-transition metal spinel oxides to produce a material of low material costs and with high energy densities, creating an avenue for plausibly sized modules with high energy storing capacities.

Muhich, Christopher↗
DOE OSTI2021

Predicting the onset of metal-insulator transitions in transition metal oxides-A first step in designing neuromorphic devices.

Several transition metal oxides, including La1-xSrxCoO3, are promising materials to realize resistive switching devices for neuromorphic applications, as they can undergo a metal-to-insulator transition (MIT) upon small perturbations to their electronic structure. Here, we focus on the MIT induced by varying the oxygen vacancy concentration, and we propose a model to predict the required electrical bias, based on three fundamental quantities: the vacancy formation energy, the permanent polarization in the material, and its dielectric constant. We obtain these quantities using first-principles electronic structure calculations, and we discuss strategies to minimize the electrical bias which may be adopted experimentally to design and optimize neuromorphic devices.

Zhang, Shenli↗
DOE OSTI2022

Hydrocarbon, Oxidation, Dehydrogenation and Coupling Over Model Metal Oxide Surfaces

Final report for a 24.5 year single investigator project aimed at understanding structure/function relationships in adsorption and reaction on metal oxide surfaces for understanding heterogeneous catalysis. An experimental surface science approach was taken using single crystal surfaces as model catalysts and supplemented by density functional theory (DFT) calculations. Materials studied experimentally and computationally include the base metal oxide SnO 2 and transition metal oxides α-Cr 2 O 3 , α-Fe 2 O 3 and MnO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Chemo-Mechanical Instabilities in Lithium Cobalt Oxide at Higher State-Of-Charge in Li-Ion Batteries

Transition metal oxide cathodes are widely used in commercial Li-ion batteries. However, their practical charge capacity is limited due to severe chemo-mechanical instabilities at higher charge voltage, and state-of-charge condition. Here, in situ stress and strain measurements were synchronized to probe mechanical deformations in the lithium cobalt oxide (LCO) cathode via a multi-beam stress sensor and digital image correlation, respectively. In situ mechanical measurements revealed how Li removal from the electrode structure induces deformations on the LCO composite cathodes during cycling. The structure and morphology of the LCO cathodes were further investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM) studies. Two distinct electrochemical and mechanical behaviors were identified when the LCO was charged up to 4.65 V. The LCO undergoes a compressive stress generation when charged up to 4.2 V and surface fractures on the LCO particles were detected by SEM. LCO cathode experienced significantly large contractions (negative strains) when charged up to 4.65 V, where intergranular crack formation and phase transformation were detected on the LCO particles via SEM and XRD, respectively. Overall, the study bridges complicated structural deformations with in situ analysis of mechanical degradations in LCO cathodes charged at higher voltages. The correlation is vital to understanding instability mechanisms in transition metal oxides at high voltages for alkali metal ion batteries.

higher state-of-charge↗
DOE OSTI2024

Electrolytes and electrochemical devices

Disclosed herein are electrolytes and electrochemical devices. The electrochemical devices comprise cathodes that include nickel-rich layered lithium transition metal oxides, lithium-rich layered transition-metal oxides, lithium manganese-based spinel oxides, lithium polyanion-based compounds, and combinations thereof. The electrolytes include a lithium imide salt, an aprotic acyclic carbonate solvent, and an additive, wherein the additive comprises a metal salt, an aprotic solvent, or a combination thereof. The electrolyte can be stable at a voltage of 4.3 V or above vs. Li/Li+.

Manthiram, Arumugam↗
DOE OSTI2022

Unravelling the Nature of the Intrinsic Complex Structure of Binary‐Phase Na‐Layered Oxides

Abstract The layered sodium transition metal oxide, NaTMO 2 (TM = transition metal), with a binary or ternary phases has displayed outstanding electrochemical performance as a new class of strategy cathode materials for sodium‐ion batteries (SIBs). Herein, an in‐depth phase analysis of developed Na 1− x TMO 2 cathode materials, Na 0.76 Ni 0.20 Fe 0.40 Mn 0.40 O 2 with P2‐ and O3‐type phases (NFMO‐P2/O3) is offered. Structural visualization on an atomic scale is also provided and the following findings are unveiled: i) the existence of a mixed‐phase intergrowth layer distribution and unequal distribution of P2 and O3 phases along two different crystal plane indices and ii) a complete reversible charge/discharge process for the initial two cycles that displays a simple phase transformation, which is unprecedented. Moreover, first‐principles calculations support the evidence of the formation of a binary NFMO‐P2/O3 compound, over the proposed hypothetical monophasic structures (O3, P3, O′3, and P2 phases). As a result, the synergetic effect of the simultaneous existence of P‐ and O‐type phases with their unique structures allows an extraordinary level of capacity retention in a wide range of voltage (1.5–4.5 V). It is believed that the insightful understanding of the proposed materials can introduce new perspectives for the development of high‐voltage cathode materials for SIBs.

Paidi, Anil K.↗
DOE OSTI2022

Free Energy Dependencies for Interfacial Electron Transfer from Tin-Doped Indium Oxide (ITO) to Molecular Photoredox Catalysts

John B. Goodenough proposed that interfacial electron transfer kinetics from main group metal oxides should be fundamentally different from that of transition metal oxides, an expectation that has not been widely tested. Herein, the kinetics for interfacial electron transfer from mesoporous transparent conductive oxide Tin-doped Indium Oxide (ITO) to four photoredox catalysts (PCs) were characterized in acetonitrile electrolytes. The photocatalysts had the form: [Ru(4,4ʹ-R 2 -2,2′-bipyridine) 2 (4,4ʹ-(PO 3 H 2 ) 2 -2,2′-bipyridine)] 2+ , where R was H, methoxy, tert -butyl, and Br. The impact of the surface binding group was characterized with [Ru(2,2′-bipyridine) 2 (4,4ʹ-(CO 2 H) 2 -bpy)] 2+ . The interfacial electron transfer reaction ITO(e − )∣PC + → ITO∣PC was quantified by nanosecond absorption spectroscopy as a function of the applied potential (and hence ‒Δ G °). Specific conditions of applied potential were identified where the kinetics were sensitive to the incident irradiance. A layer-by-layer method was used to insert ionic methylene bridge(s) between the PC and the oxide surface. Marcus-Gerischer analysis of the kinetic data indicates non-adiabatic interfacial electron transfer with total reorganization energies that increase when bridges were placed between the photocatalyst and the ITO surface.

Bangle, Rachel E.↗
DOE OSTI2022

Hubbard-corrected oxide formation enthalpies without adjustable parameters

A density functional theory (DFT) approach to computing transition metal oxide heat of formation without adjustable parameters is presented. Different degrees of d-electron localization in oxides are treated within the DFT+U approach with site-dependent, first-principles Hubbard U-parameters obtained from linear response theory, and delocalized states in the metallic phases are treated without Hubbard corrections. Comparison of relative stabilities of these differently treated phases is enabled by a local d-electron density matrix-dependent model, which was found by genetic programming against experimental reference formation enthalpies. This mathematically simple model does not explicitly depend on the Hubbard-corrected ionic species and is shown to reproduce the heats of formation of the Mott insulators Ca 2 RuO 4 and Y 2 Ru 2 O 7 within ~3% of experimental results, where the experimental training data did not contain Ru oxides. This newly developed method thus absolves from the need for element-specific corrections fitted to experiments in existing Hubbard-corrected approaches to the prediction of reaction energies of transition metal oxides and metals. The absence of fitting parameters opens up here the possibility to predict relative thermodynamic stabilities and reaction energies involving d-states of varying degree of localization at transition metal oxide interfaces and defects, where site-dependent U-parameters will be particularly important and devising a fitting scheme against experimental data with predictive power would be exceedingly difficult.

transition metal oxides↗
DOE OSTI2024

Electrically-driven IMT and volatile memristor behavior in NdNiO 3 films

Abstract Transition metal oxides with insulator-metal transitions (IMTs) are uniquely suited for volatile memristor devices that mimic the spiking of biological neurons. Unlike most non-volatile memristors, which often operate via ion migration into filaments, volatile devices utilize a reversible phase change that returns to a ground state in the absence of applied stimulus. In these devices, Joule heating triggers the IMT and changes the bulk resistivity rather than influencing conduction through defects, as in previous studies. This volatile resistive switching behavior has previous been leveraged in niobium and vanadium oxides, but not in rare-earth nickelates, despite their tunable transition temperatures. This study demonstrates an electrically driven IMT in the prototypical rare-earth nickelate, NdNiO 3 , in large area devices. While previous work examining the electrically-driven IMT in NdNiO 3 suggests defect-dominated conduction, this study shows clear s-type negative differential resistance (NDR) consistent with temperature-dependent resistivity measurements. The NDR peak-to-valley voltage scales linearly with temperature as expected for conductivity pathways dominated by bulk IMT behavior. Unlike other transition metal oxides, which are modeled using the insulator-metal phase fraction as the internal state variable, a thermoelectric model with temperature as the internal state variable is found to more accurately describe the current–voltage characteristic of NdNiO 3 volatile memristors. Overall, we report the synthesis, fabrication, and characterization of NdNiO 3 volatile memristors with resistivity dominated by bulk-like IMT behavior which is scalable and not dependent upon oxygen vacancy migration or defect mediated conduction pathways.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Weakly Solvating Electrolyte to Enable Lithium- and Manganese-Rich Cathode-Based Li-Ion Batteries

Traditional ethylene carbonate (EC)-based electrolytes exhibit strong solvation power at the surface of the layered transition metal oxide cathodes, which accelerates transition metal dissolution. The subsequent migration and deposition of dissolved transition metal species on the anode surface lead to significant capacity fading. To overcome this difficulty, we report a weakly solvating, all-fluorinated electrolyte designed to mitigate transition metal dissolution. For the first time, the role of electrolyte solvation in suppressing transition metal dissolution is systematically investigated. The tailored electrolyte significantly reduces transition metal dissolution and enhances the electrochemical performance of Li- and Mn-rich (LMR) cathode/graphite cells. This solvation-modulating strategy offers a broadly applicable framework for stabilizing interphases in other earth-abundant cathode chemistries, which similarly demand kinetic protection against interfacial degradation.

25 ENERGY STORAGE↗