Search NASA⌕ Search

SEARCH · Search NASA

Results for “Triplet state”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

The synthesis and transport properties of the complex salt /TMPD/ /TCNQ/2

The syntheses and transport properties of the complex salt /TMPD/ /TCNQ/2 are described. At high temperatures, the complex is a magnetic semiconductor with transport properties intermediate between those found in the highly conducting and poorly conducting TCNQ salts. The complex undergoes a transition below 50-60 K to a state exhibiting singlet-triplet behavior with weakly alternating exchange coupling.

Somoano, R.↗

Determination of electron temperature in a Penning discharge by the helium line ratio method

The helium spectral line intensity ratio technique utilizes the difference in electron energy dependences of the ground state electron impact excitation cross sections of the singlet and triplet series of neutral helium and the excited states of helium ions to determine the electron temperatures in a toroidal steady-state Penning discharge operating in helium. By varying the Penning discharge anode voltage and background pressure over a range of 2.5 to 28 kV and 0.00005 to 0.0001 torr, respectively, it was possible to make a comparison of the electron temperature as measured from various possible line ratios over a wide range of temperatures (10 to 100+ eV) under reproducible steady-state conditions.

Richardson, R. W.↗

Finding the global minimum: a fuzzy end elimination implementation

The 'fuzzy end elimination theorem' (FEE) is a mathematically proven theorem that identifies rotameric states in proteins which are incompatible with the global minimum energy conformation. While implementing the FEE we noticed two different aspects that directly affected the final results at convergence. First, the identification of a single dead-ending rotameric state can trigger a 'domino effect' that initiates the identification of additional rotameric states which become dead-ending. A recursive check for dead-ending rotameric states is therefore necessary every time a dead-ending rotameric state is identified. It is shown that, if the recursive check is omitted, it is possible to miss the identification of some dead-ending rotameric states causing a premature termination of the elimination process. Second, we examined the effects of removing dead-ending rotameric states from further considerations at different moments of time. Two different methods of rotameric state removal were examined for an order dependence. In one case, each rotamer found to be incompatible with the global minimum energy conformation was removed immediately following its identification. In the other, dead-ending rotamers were marked for deletion but retained during the search, so that they influenced the evaluation of other rotameric states. When the search was completed, all marked rotamers were removed simultaneously. In addition, to expand further the usefulness of the FEE, a novel method is presented that allows for further reduction in the remaining set of conformations at the FEE convergence. In this method, called a tree-based search, each dead-ending pair of rotamers which does not lead to the direct removal of either rotameric state is used to reduce significantly the number of remaining conformations. In the future this method can also be expanded to triplet and quadruplet sets of rotameric states. We tested our implementation of the FEE by exhaustively searching ten protein segments and found that the FEE identified the global minimum every time. For each segment, the global minimum was exhaustively searched in two different environments: (i) the segments were extracted from the protein and exhaustively searched in the absence of the surrounding residues; (ii) the segments were exhaustively searched in the presence of the remaining residues fixed at crystal structure conformations. We also evaluated the performance of the method for accurately predicting side chain conformations. We examined the influence of factors such as type and accuracy of backbone template used, and the restrictions imposed by the choice of potential function, parameterization and rotamer database. Conclusions are drawn on these results and future prospects are given.

NASA Program Exobiology↗

Theoretical Studies of Some HEDM Species: Cyclic O4, Cyclic O3 and Cubane

Calculations have been carried out for the HEDM species (cyclic O4, cyclic O3, and cubane) using CASSCF/derivative and CASSCF/ICCI methods. Cyclic O4 is of interest both as a potential HEDM species and because of its possible role in the ozone deficit problem in atmospheric chemistry. We have studied the pathway for decomposition from the D(2d) minimum and also have found the approximate location of the singlet triplet crossing. The barrier to decomposition is found to be about 9 kcal/mol and is not limited by the singlet triplet crossing. For cyclic O3 we have focused on the crossings between the lowest five surfaces (X(1)A(1), s(1)A(1), (1)A(2), (1)B(1), and (1)B(2)) to provide some insight into ways to form cyclic O3 photochemically. The crossing region between the X(1)A(1) and 2(1)A(1) surfaces is in agreement with the work of Xantheas et al. The calculations show that vertical excitation from the ground state to the (1)A(2) state leads to a crossing with the (1)A(1) manifold near the crossing region of the X(1)A(1) and 2(1)A(1) surfaces. We have studied the decomposition pathways for cubane to benzene plus acetylene and to cyclooctatetraene. We have also studied the ground and excited states for the photochemical ring closure step. The state which closes to cubane can be described as a double triplet pi to pi* excitation with respect to the ground state. Thus, this state has only a small oscillator strength with respect to the ground state. However, there is a singlet pi to pi* state at nearly the same energy and excitation to this state followed by intersystem crossing could lead to the triplet pi to pi* state.

Walch, Stephen P.↗

Pulsed radiolysis of model aromatic polymers and epoxy based matrix materials

Models of primary processes leading to deactivation of energy deposited by a pulse of high energy electrons were derived for epoxy matrix materials and polyl-vinyl naphthalene. The basic conclusion is that recombination of initially formed charged states is complete within 1 nanosecond, and subsequent degradation chemistry is controlled by the reactivity of these excited states. Excited states in both systems form complexes with ground state molecules. These excimers or exciplexes have their characteristics emissive and absorptive properties and may decay to form separated pairs of ground state molecules, cross over to the triplet manifold or emit fluorescence. ESR studies and chemical analyses subsequent to pulse radiolysis were performed in order to estimate bond cleavage probabilities and net reaction rates. The energy deactivation models which were proposed to interpret these data have led to the development of radiation stabilization criteria for these systems.

Gupta, A.↗

Solid state photochemistry of polycarbonates

The quantum yield of photoFries rearrangement in a polycarbonate film has been analyzed as a function of temperature and humidity on the basis of previously reported (Koyler and Mann, 1977) experimental data. Results indicate that in the homogeneous amorphous phase, photoFries rearrangement is a concerted process proceeding either from the pi star reversed arrow n singlet, in which case it must be subject to considerable self quenching, or from a triplet, presumably the first triplet since the lifetime of higher triplets is expected to be very short in the solid phase. If the parent excited state is the first triplet, chain scission is possibly an independent process, probably occurring from the pi star reversed arrow n singlet. Evidence of chain scission on photodegradation in the solid state includes loss of C-O and C-C bond intensities revealed in the Fourier transform infrared spectra, gel permeation chromotography elution profiles of degraded film samples dissolved in CHCl3, and a decrease in tensile strength and T sub g as photodegradation proceeds. Chain scission is apparently inhibited as photoFries products accumulate.

Gupta, A.↗

Quantum Mechanical Determination of Potential Energy Surfaces for TiO and H2O

We discuss current ab initio methods for determining potential energy surfaces, in relation to the TiO and H2O molecules, both of which make important contributions to the opacity of oxygen-rich stars. For the TiO molecule we discuss the determination of the radiative lifetimes of the excited states and band oscillator strengths for both the triplet and singlet band systems. While the theoretical radiative lifetimes for TiO agree well with recent measurements, the band oscillator strengths differ significantly from those currently employed in opacity calculations. For the H2O molecule we discuss the current results for the potential energy and dipole moment ground state surfaces generated at NASA Ames. We show that it is necessary to account for such effects as core-valence Correlation energy to generate a PES of near spectroscopic accuracy. We also describe how we solve the ro-vibrational problem to obtain the line positions and intensities that are needed for opacity sampling.

Langhoff, Stephen R.↗

Energy storage possibilities of atomic hydrogen

The possibility of storing large amounts of energy in a free radical system such as atomic hydrogen is analyzed. Attention is focused on theoretical calculations of the ground state properties of spin-aligned atomic triplet hydrogen, deuterium, and tritium. The solid-liquid phase transition in atomic hydrogen is also examined.

Etters, R. D.↗

Statistical equilibrium in cometary C2. IV - A 10 level model including singlet-triplet transitions

Resonance fluorescence theory was used to calculate the population distribution in the energy states of the C2 molecule in comets. Ten electronic states, each with 14 vibrational states, were used in the calculations. These new calculations differ from earlier work in terms of additional electronic levels and the role of singlet-triplet transitions between the b and X levels. Since transition moments are not known, calculations are made of observable flux ratios for an array of possible values. Comparison with existing observations indicates that the a-X transition is very important, and there is marginal indication that the b-X transition is present. Swan band sequence flux ratios at large heliocentric distance are needed, as are accurate Mulliken/Swan and Phillips/Ballik-Ramsay (1963) observations.

Krishna Swamy, K. S.↗

Structure of V(H2)n(+) Clusters for n = 1-6

Geometries, vibrational frequencies, spin states, H2 binding energies, and Delta(S) values have been determined for V(H2)n(+), for n = 1-6, using the B3LYP hybrid functional. The binding energies and Delta(S) values are in good agreement with experiment, thus showing that the B3LYP functional offers a reliable approach for optimizing the geometry and determining the H2 binding energies for this system. The calculations show that the increase in the binding energy and entropy associated with the addition of the sixth H2 to V(+) is due to a change in spin state from quintet for the smaller clusters to triplet for V(H2)6(+). The results for V(H2)n(+) are compared with those for CO(H2)n(+).

Maitre, Philippe↗

Atomization and mixing study

The state of the art in atomization and mixing for triplet, pentad, and coaxial injectors is described. Injectors that are applicable for LOX/hydrocarbon propellants and main chamber and fuel rich preburner/gas generator mixture ratios are of special interest. Various applicable correlating equations and parameters as well as test data found in the literature are presented. The validity, utility, and important aspects of these data and correlations are discussed and the measurement techniques used are evaluated. Propellant mixing tests performed are described and summarized, results are reported, and tentative conclusions are included.

Ferrenberg, A.↗

A computational study of the TiO2 molecule

A computational investigation of the ground 1A1 and lowest energy B2 states of the titanium dioxide molecule has been carried out. The treatment utilized SCF calculations in an extended basis followed by a CI treatment for each geometry. The ground state geometry agrees well with experiment, while the agreement between the computed vibrational frequency nu1 and the experimental value for a matrix isolated TiO2 is less satisfactory. Population analysis for the ground state indicates less than one excess electron on each oxygen atom. The first excited state has a linear geometry and the singlet and triplet are essentially degenerate.

Ramana, M. V.↗

Photoemission from CsI - Experiment.

Considerable attention in the investigation was given to the resolution maximization of details in the spectra. Very thin films were used in the measurements, which were conducted at 300 and 77 C with the aid of an improved photoemission apparatus. It was found that the principal features of the photoemission spectra from CsI cannot be explained on the basis of simple transitions from localized ionic states because such a model would predict a doublet instead of the triplet observed in the photoemission data.

Distefano, T. H.↗

Line Profile Measurements of Atomic Oxygen at 1300 A with a VUV Raman Shifter

We are currently developing an atomic oxygen diagnostic to study the degree of oxygen dissociation in ground-based facilities. The absorption of the (sub 3)P - (sup 3)S(sup 0) resonance triplet in the vacuum ultraviolet is a direct measure of the ground state number density of atomic oxygen. Although the integrated line strength is well known for these transitions, the line profile is not. We report the results of a series of experiments in which the line profile is measured in shock-heated oxygen. An ArF excimer laser and a hydrogen Raman shifter generate tunable VUV radiation at the resonance wavelength. The test gas is dissociated oxygen, generated in the Electric Arc Shock Tube (EAST) Facility at NASA-Ames Research Center. By measuring the absorption of known concentrations of atomic oxygen, we are able to study the absorption line profile. The results will serve as a calibration to apply this diagnostic in other flowfields.

Sharma, Surendra P.↗

An initio calculations on C2, Si2, and SiC

Full-configuration-interaction (FCI) calculations have been performed for the Z 1Sigma(g)(+), a 3Pi(u), and b 3Sigma(g)(-) states of C2 and the X 3Sigma(g)(-) and A 3Pi(u) states of Si2 in valence double-zeta plus polarization one-particle basis sets. By carrying out the CASSCF multireference singles plus doubles CI (MRCI) procedure in a very large Gaussian basis set and correcting for errors with the FCI, the triplet-triplet separation in C2 is reproduced to within 47/cm. Analogous calculations on Si2 definitively determine the ground state to be 3Sigma(g)(-); the 3Pi(u) state is only 440 + or - 100/cm higher in energy. For the SiC molecule, which has never been observed spectroscopically but is believed to be an important component in carbon stars and to be present in interstellar space, the A 3Sigma(-) state is nearly 4000/cm above the X 3Pi ground state.

Bauschlicher, Charles W., Jr.↗

Oscillator strengths and collision strengths for neutral sulfur

Configuration-interaction target wave functions are used in the present calculation of collision strengths, for electron impact excitation of neutral sulfur from the group 3p4 3P state to excited states 3p3 4s 3S0, 3p3(4S0)3d 3D0, and 3p3 4s 3P0, in a close coupling approximation for the energy range up to 1,000,000 K. Configuration-interaction target wave functions are used in the calculation of collision strengths, and oscillator strengths for various triplet transitions are reported together with transitions between 3p4 1D and 3p4 1S and other singlet-excited states.

Ho, Y. K.↗

Theoretical Studies of the HO/HO2 Catalytic Cycle for Ozone Destruction

Recently it has been determined that the HO/HO2 catalytic cycle accounts for nearly one-half of the total ozone depletion in the lower stratosphere. The catalytic cycle is: (1) HO + O3 yields HO2 + O2; (2) HO2 + O3 yields HO + O2 + O2. The net reaction is 2O3 yields 3O2. The rate limiting step in this process is the reaction of HO2 with ozone. There is a problem extending the experimental measurement of the rate of this reaction over the range 233-400 K down to stratospheric temperatures of 210-220 K. Therefore we have undertaken a project to determine the temperature dependence of the rate constant for this reaction in the low temperature region. The first step in this project, which is described in this poster, is the determination of the relevant potential energy surfaces. The calculations use CASSCF/derivative methods to define the pathways followed by CASSCF/ACPF to determine the energetics. The HO + O3 reaction is found to proceed through an HO4 complex, which is unstable with respect to HO2 + O2. The HO2 +O3 reaction is more complex. One pathway, which has been characterized, is the formation of an HO5 complex which decomposes to HO3 + O2 and subsequently to HO + O2 + O2. Another pathway, which is believed to also play a role, is hydrogen abstraction to give O2 + HO3 and subsequent decomposition of HO3 to HO + O2. Isotopic labeling experiments indicate that the later pathway is dominant. However, so far attempts to locate the saddle point for this pathway have not been successful. We have also characterized the potential energy surfaces for a number of species involved in these reactions, including HO3 and triplet O4. The triplet O4 species is probably involved in the reaction of vibrationally excited O2 with ground state O2 leading to O3 + O. The latter reaction is believed to be important as an additional source of stratospheric ozone.

Walch, Stephen P.↗

The Effect of the Spin-Forbidden Co((sup 1) Sigma plus) plus O((sup 3) P) Yields CO2 (1 Sigma (sub G) plus) Recombination Reaction on Afterbody Heating of Mars Entry Vehicles

Vibrationally excited CO2, formed by two-body recombination from CO((sup 1) sigma plus) and O((sup 3) P) in the wake behind spacecraft entering the Martian atmosphere reaction, is potentially responsible for the higher than anticipated radiative heating of the backshell, compared to pre-flight predictions. This process involves a spin-forbidden transition of the transient triplet CO2 molecule to the longer-lived singlet. To accurately predict the singlet-triplet transition probability and estimate the thermal rate coefficient of the recombination reaction, ab initio methods were used to compute the first singlet and three lowest triplet CO2 potential energy surfaces and the spin-orbit coupling matrix elements between these states. Analytical fits to these four potential energy surfaces were generated for surface hopping trajectory calculations, using Tully's fewest switches surface hopping algorithm. Preliminary results for the trajectory calculations are presented. The calculated probability of a CO((sup 1) sigma plus) and O((sup 3) P) collision leading to singlet CO2 formation is on the order of 10 (sup -4). The predicted flowfield conditions for various Mars entry scenarios predict temperatures in the range of 1000 degrees Kelvin - 4000 degrees Kelvin and pressures in the range of 300-2500 pascals at the shoulder and in the wake, which is consistent with a heavy-particle collision frequency of 10 (sup 6) to 10 (sup 7) per second. Owing to this low collision frequency, it is likely that CO((sup 1) sigma plus) molecules formed by this mechanism will mostly be frozen in a highly nonequilibrium rovibrational energy state until they relax by photoemission.

CO2 recombination↗