Search NASA⌕ Search

SEARCH · Search NASA

Results for “Turbulence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Mean velocity, turbulence intensity and turbulence convection velocity measurements for a convergent nozzle in a free jet wind tunnel

The effect of light on the mean flow and turbulence properties of a 0.056 m circular jet were determined in a free jet wind tunnel. The nozzle exit velocity was 122 m/sec, and the wind tunnel velocity was set at 0, 12, 37, and 61 m/sec. Measurements of flow properties including mean velocity, turbulence intensity and spectra, and eddy convection velocity were carried out using two linearized hot wire anemometers. Normalization factors were determined for the mean velocity and turbulence convection velocity.

Mccolgan, C. J.↗
NASA NTRS1978

Experimental studies on the influence of the degree of turbulence and of a turbulence thread on the compressible subsonic flow through flat compressor cascades

The measurements revealed that at low Reynolds numbers the profile loss is considerably reduced both by the increased degree of turbulence and by a turbulence thread, while it is somewhat increased at high Reynolds numbers, and that a profile loss reduction is connected with an increase in deflection and in pressure shift. The turbulence generator is most effective on the one hand in the middle of the operating range of the cascades, and on the other at very high Mach numbers together with a large angle of incidence.

Barsun, K.↗
NASA NTRS1981

Premixed turbulent flame blowoff velocity correlation based on coherent structures in turbulent flows

A correlation for the blowoff velocity of premixed turbulent flames stabilized by bluff bodies is devloped using a simple model for coherent structures in turbulent flows. The correlation shows the correct trends for variations in equivalence ratio, free stream pressure and temperature, flameholder characteristic size, and turbulent Reynolds number, and good agreement with published experimental data is obtained.

Radhakrishnan, K.↗
NASA NTRS1982

Turbulent transport modeling of shear flows around an aerodynamic wing. Development of turbulent near-wall model and its application to recirculating flows

Progress in implementing and refining two near-wall turbulence models in which the near-wall region is divided into either two or three zones is outlined. These models were successfully applied to the computation of recirculating flows. The research was further extended to obtaining experimental results of two different recirculating flow conditions in order to check the validity of the present models. Two different experimental apparatuses were set up: axisymmetric turbulent impinging jets on a flat plate, and turbulent flows in a circular pipe with a abrupt pipe expansion. It is shown that generally better results are obtained by using the present near-wall models, and among the models the three-zone model is superior to the two-zone model.

Amano, R. S.↗
NASA NTRS1983

A turbulence model for three dimensional turbulent shear flows over curved rotating bodies

There exists currently considerable interest in the development of numerical procedures for solving the equations governing three-dimensional fluid flows. In particular, improved calculations of viscous flows on rotating bodies such a turbomachinery rotors are of great importance. The present investigation is mainly concerned with the analysis of the effect of rotation on the dissipation rate equation and the Reynolds stress equations. Attention is given to governing equations and modelling, algebraic Reynolds stress equations, a procedure for implementing the turbulence closure scheme, results for a model representative of centrifugal turbomachinery, and results for axial turbomachinery. The proposed turbulence model is valid for three-dimensional, rotating, and curved flows. The model has all the essential physics of turbulence, mean flow, rotation, and the curvature.

Galmes, J. M.↗
NASA NTRS1987

The structure of a turbulent shear layer embedded in turbulence

Measurements are reported on the growth rate and the turbulent characteristics of a two-dimensional, free shear layer generated by a nonuniform array of parallel turbulent jets and wakes. Although bounded by roughly isotropic turbulence and not having any detectable initial periodicity, this layer develops weak, plane, periodic vortices that grow in relative strength and scale downstream. Their scale and frequency match those reported for shear layers that begin with strong vortices.

Tavoularis, S.↗
NASA NTRS1988

Studies of high latitude mesospheric turbulence by radar and rocket. II - Measurements of small scale turbulence

Measurements of mesospheric small scale turbulence and associated larger scale wave structures were obtained from rocket probe flights during equinox in spring 1985. The measurements were verified by data from the mesosphere-stratosphere-troposphere radar at Poker Flat, Alaska. Electron density irregularities down to an altitude of about 62 km and fluctuations in positive ion density in the altitude region from 50 to 90 km were measured. Turbulence in the inertial subrange was observed at heights where the fluctuations generally were largest. Measurement of background electron density exhibited gradients relative to the monotonically increasing density profile, suggesting the presence of large amplitude wave motions transporting the plasma by mixing. The radar detected the occurrence of 1-3 km wavelike perturbations superimposed on a 7-km wave in the wind velocity field. It is suggested that the 1-3 km waves are more important in the transport of energy and momentum and in the production of turbulence in the lower mesosphere.

Blood, S. P.↗
NASA NTRS1990

The effects of high free-stream turbulence on heat transfer in turbulent boundary layer

A series of heat transfer measurements utilizing a variety of flows, each characterized by a high level of turbulence, is evaluated. This research is conducted to aid in predicting the heat transfer of first stage turbine blades and vanes. Instead of establishing a particular high turbulence flow field and measuring its effect on heat transfer, a set of flow fields with very aggressive heat transfer characteristics was determined in order to learn which aspects of these flows were responsible for the high heat transfer. Results of these tests were utilized to identify the most aggressive heat transfer environments, and then the turbulence properties of those flows were studied.

Maciejewski, Paul K.↗
NASA NTRS1991

Multigrid acceleration and turbulence models for computations of 3D turbulent jets in crossflow

A multigrid method is presented for the calculation of three-dimensional turbulent jets in crossflow. Turbulence closure is achieved with either the standard k-epsilon model or a Reynolds Stress Model (RSM). Multigrid acceleration enables convergence rates which are far superior to that for a single grid method. With the k-epsilon model the rate approaches that for laminar flow, but with RSM it is somewhat slower. The increased stiffness of the system of equations in the latter may be responsible. Computed results with both turbulence models are compared with experimental data for a pair of opposed jets in crossflow. Both models yield reasonable agreement with mean flow velocity but RSM yields better prediction of the Reynolds stresses.

Demuren, A. O.↗
NASA NTRS1993

A representation for the turbulent mass flux contribution to Reynolds-stress and two-equation closures for compressible turbulence

The turbulent mass flux, or equivalently the fluctuating Favre velocity mean, appears in the first and second moment equations of compressible kappa-epsilon and Reynolds stress closures. Mathematically it is the difference between the unweighted and density-weighted averages of the velocity field and is therefore a measure of the effects of compressibility through variations in density. It appears to be fundamental to an inhomogeneous compressible turbulence, in which it characterizes the effects of the mean density gradients, in the same way the anisotropy tensor characterizes the effects of the mean velocity gradients. An evolution equation for the turbulent mass flux is derived. A truncation of this equation produces an algebraic expression for the mass flux. The mass flux is found to be proportional to the mean density gradients with a tensor eddy-viscosity that depends on both the mean deformation and the Reynolds stresses. The model is tested in a wall bounded DNS at Mach 4.5 with notable results.

Ristorcelli, J. R.↗
NASA NTRS1996

Transonic Turbulent Flow Predictions With Two-Equation Turbulence Models

Solutions of the Favre-averaged Navier-Stokes equations for two well-documented transonic turbulent flows are compared in detail with existing experimental data. While the boundary layer in the first case remains attached, a region of extensive flow separation has been observed in the second case. Two recently developed k-epsilon, two-equation, eddy-viscosity models are used to model the turbulence field. These models satisfy the realizability constraints of the Reynolds stresses. Comparisons with the measurements are made for the wall pressure distribution, the mean streamwise velocity profiles, and turbulent quantities. Reasonably good agreement is obtained with the experimental data.

Liou, William W.↗
NASA NTRS2007

In-Service Evaluation of the Turbulence Auto-PIREP System and Enhanced Turbulence Radar Technologies

From August 2003 to December 2006, In-Service Evaluations (ISE) of the Turbulence Auto-PIREP System (TAPS) and Enhanced Turbulence (E-Turb) Radar, technologies developed in NASA's Turbulence Prediction and Warning System (TPAWS) element of its Aviation Safety and Security Program (AvSSP), were conducted. NASA and AeroTech Research established an industry team comprising AeroTech, Delta Air Lines, Rockwell Collins, and ARINC to conduct the ISEs. The technologies were installed on Delta aircraft and their effectiveness was evaluated in day-to-day operations. This report documents the establishment and conduct of the ISEs and presents results and feedback from various users.

Prince, Jason B.↗
NASA NTRS1956

Charts Adapted from Van Driest's Turbulent Flat-plate Theory for Determining Values of Turbulent Aerodynamic Friction and Heat-transfer Coefficients

A modified method of Van Driest's flat-plate theory for turbulent boundary layer has been found to simplify the calculation of local skin-friction coefficients which, in turn, have made it possible to obtain through Reynolds analogy theoretical turbulent heat-transfer coefficients in the form of Stanton number. A general formula is given and charts are presented from which the modified method can be solved for Mach numbers 1.0 to 12.0, temperature ratios 0.2 to 6.0, and Reynolds numbers 0.2 times 10 to the 6th power to 200 times 10 to the 6th power.

HEAT TRANSFER, AERODYNAMIC↗