Search NASA⌕ Search

SEARCH · Search NASA

Results for “VAPOR PHASE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Vapor phase transport system and method for depositing perovskite semiconductors

Vapor phase transport systems and methods of depositing perovskite films are described. In an embodiment, a deposition method includes feeding a perovskite solution or constituent powder to a vaporizer, followed by vaporization and depositing the constituent vapor as a perovskite film. In an embodiment, a deposition system and method includes vaporizing different perovskite precursors in different vaporization zones at different temperatures, followed by mixing the vaporized precursors to form a constituent vapor, and depositing the constituent vapor as a perovskite film.

Bush, Kevin M. Alexander↗

Examination of the Capabilities of Metalorganic Vapor-Phase Epitaxy in Fabrication of Thin InAs/GaSb Layers

The capabilities of metalorganic vapor-phase epitaxy (MOVPE) in fabrication of structures with thin (1–2 nm) alternating InAs/GaSb layers on a GaSb substrate are studied. The characteristics of these structures were examined using transmission electron microscopy and methods of photo- and electroluminescence. It was found that two GaInAsSb solid solutions of different compositions were formed in the active regions of structures in the given growth conditions. The fabricated system was characterized by an emission wavelength of 4.96 μm at a temperature of 77 K. The results reveal new opportunities for bandgap engineering of semiconductor structures based on InAs/GaSb, which are designed for optoelectronic devices operating in the infrared range, provided by MOVPE.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Vapor-phase grafting of functional silanes on atomic layer deposited Al 2 O 3

Fundamental studies are needed to advance our understanding of selective adsorption in aqueous environments and develop more effective sorbents and filters for water treatment. Vapor-phase grafting of functional silanes is an effective method to prepare well-defined surfaces to study selective adsorption. In this investigation, we perform vapor phase grafting of five different silane compounds on aluminum oxide (Al2O3) surfaces prepared by atomic layer deposition. These silane compounds have the general formula L3Si–C3H6–X where the ligand, L, controls the reactivity with the hydroxylated Al2O3 surface and the functional moiety, X, dictates the surface properties of the grafted layer. We study the grafting process using in situ Fourier transform infrared spectroscopy and ex situ x-ray photoelectron spectroscopy measurements, and we characterize the surfaces using scanning electron microscopy, atomic force microscopy, and water contact angle measurements. Here, we found that the structure and density of grafted aminosilanes are influenced by their chemical reactivity and steric constraints around the silicon atom as well as by the nature of the anchoring functional groups. Methyl substituted aminosilanes yielded more hydrophobic surfaces with a higher surface density at higher grafting temperatures. Thiol and nitrile terminated silanes were also studied and compared to the aminosilane terminated surfaces. Uniform monolayer coatings were observed for ethoxy-based silanes, but chlorosilanes exhibited nonuniform coatings as verified by atomic force microscopy measurements.

36 MATERIALS SCIENCE↗

Ar{sup +}-irradiation-induced damage in hydride vapor-phase epitaxy GaN films

The authors have investigated the electrical characteristics of hydride vapor-phase epitaxy GaN films exposed to Ar{sup +} irradiation, employing Schottky barrier diodes. The Ar{sup +} irradiation tends to largely increase the effective carrier concentration in the near surface region of GaN up to ∼25 nm, due to the generation of donor-type N vacancy defects, compared to the original value before the irradiation. More interestingly, acceptor-type deep-level defects are found to be formed at ∼2.1, ∼2.9, and ∼3.2 eV below the conduction band in the subsequently deeper region, in which Ga vacancies introduced by the Ar{sup +} irradiation are considered to be in-diffused and immediately combined with hydrogen. These N vacancies and hydrogenated Ga vacancies formed are dominantly responsible for changing the depth profiles of the effective carrier concentration via the carrier generation, the carrier trapping, and/or carrier compensation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

III-nitride nanopyramid light emitting diodes grown by organometallic vapor phase epitaxy.

Nanopyramid light emitting diodes (LEDs) have been synthesized by selective area organometallic vapor phase epitaxy. Self-organized porous anodic alumina is used to pattern the dielectric growth templates via reactive ion etching, eliminating the need for lithographic processes. (In,Ga)N quantum well growth occurs primarily on the six {l_brace}1{bar 1}01{r_brace} semipolar facets of each of the nanopyramids, while coherent (In,Ga)N quantum dots with heights of up to {approx}20 nm are incorporated at the apex by controlling growth conditions. Transmission electron microscopy (TEM) indicates that the (In,Ga)N active regions of the nanopyramid heterostructures are completely dislocation-free. Temperature-dependent continuous-wave photoluminescence of nanopyramid heterostructures yields a peak emission wavelength of 617 nm and 605 nm at 300 K and 4 K, respectively. The peak emission energy varies with increasing temperature with a double S-shaped profile, which is attributed to either the presence of two types of InN-rich features within the nanopyramids or a contribution from the commonly observed yellow defect luminescence close to 300 K. TEM cross-sections reveal continuous planar defects in the (In,Ga)N quantum wells and GaN cladding layers grown at 650-780 C, present in 38% of the nanopyramid heterostructures. Plan-view TEM of the planar defects confirms that these defects do not terminate within the nanopyramids. During the growth of p-GaN, the structure of the nanopyramid LEDs changed from pyramidal to a partially coalesced film as the thickness requirements for an undepleted p-GaN layer result in nanopyramid impingement. Continuous-wave electroluminescence of nanopyramid LEDs reveals a 45 nm redshift in comparison to a thin-film LED, suggesting higher InN incorporation in the nanopyramid LEDs. These results strongly encourage future investigations of III-nitride nanoheteroepitaxy as an approach for creating efficient long wavelength LEDs.

36 MATERIALS SCIENCE↗

Characterization of Isolated Ga 3+ Cations in Ga/H-MFI Prepared by Vapor-Phase Exchange of H-MFI Zeolite with GaCl 3

Ga/H-MFI was prepared by vapor-phase reaction of GaCl 3 with Brønsted acid O-H groups in dehydrated H-MFI zeolite. The resulting [GaCl 2 ] + cations in the as-exchanged zeolite are treated in H 2 at 823 K to stoichiometrically remove Cl ligands and form [GaH 2 ] + cations. Subsequent oxidation in O 2 and characterization by IR spectroscopy and NH 3 -temperature-programmed desorption (TPD) suggests that, for Ga/Al ratios ≤0.3, Ga 3+ exists predominantly as [Ga(OH) 2 ] + -H + cation pairs and to a lesser degree as [Ga(OH)] 2+ cations at low Ga/Al ratios (~0.1); while both species are associated with proximate cation-exchange sites, calculated free energies of formation suggest that [Ga(OH)] 2+ cations are more stable on cation-exchange sites associated with NNN (next-nearest neighbor) framework Al atoms than on those associated with NNNN (next-next-nearest neighbor) framework Al atoms. Ga K-edge X-ray Absorption Near Edge Spectroscopy (XANES) measurements indicate that, under oxidizing conditions and for all Ga/Al ratios, all Ga species are in the +3 oxidation state and are tetrahedrally coordinated to 4 O atoms. Fourier analysis of Ga K-edge Extended X-ray Absorption Fine Structure (EXAFS) data supports the conclusion that Ga 3+ is present predominantly as [Ga(OH) 2 ] + cations (or [Ga(OH) 2 ] + -H + cation pairs). For Ga/Al ratios ≤0.3, wavelet analysis of EXAFS data provide evidence for backscattering from nearest neighboring O atoms and from next-nearest neighboring framework Al atoms. For Ga/Al > 0.3, backscattering from next-nearest neighboring Ga atoms is also evident, characteristic of GaO x species. Here, upon reduction in H 2 , the oxidized Ga 3+ species produce [Ga(OH)H] + -H + cation pairs, [GaH 2 ] + -H + cation pairs, and [GaH] 2+ cations. Computed phase diagrams indicate that the thermodynamic stability of the reduced Ga 3+ species depends sensitively on temperature, Al-Al interatomic distance, and H 2 and H 2 O partial pressures. For Ga/Al ratios ≤0.2, it is concluded that [GaH 2 ] + -H + cation pairs and [GaH] 2+ cations are the predominant species present in Ga/H-MFI reduced above 673 K in 10 5 Pa H 2 and in the absence of water vapor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multijunction GaInP/GaAs Solar Cells Grown by Hydride Vapor Phase Epitaxy

We report the development of GaInP/GaAs monolithic tandem solar cells grown by hydride vapor phase epitaxy (HVPE). HVPE is a route to reduced III-V growth costs because the technique takes advantage of low cost inputs (elemental metals and HCl) and high source utilization, and exhibits high growth rates (up to 5 Au/min). The tandem device consists of three main components: a 1.90 eV Ga0.5In0.5P top cell, a p-Ga0.5In0.5P/n-GaAs tunnel junction, and a 1.41 eV rear heterojunction GaAs cell. The open circuit voltage (VOC) of the tandem is 2.41 V, indicating high material quality in both subcells, and voltage addition through the tunnel junction. Electroluminescence measurements indicate that the individual VOC's of the top and bottom cells are 1.40 and 1.01 V, respectively, at short circuit. This yields a band gap (EG) voltage offset, WOC = EG/q-VOC = 0.50 and 0.40 V, respectively, where q is the elementary charge. The WOC of the top cell is higher in part because the structure contains an unpassivated front surface, and because the back surface field (BSF) consists of p+ GaInP rather than a higher- EG heterobarrier. The top cell limits the current of this series-connected device for these reasons, with a short-circuit current density, JSC, of 10.1+/- 0.2 mA/cm2. The overall efficiency is 20.3 +/- 0.4% (uncertified). We measured the device under concentration to look for signs of tunnel junction breakdown, which we did not observe up to ~1000x, which was the highest concentration tested. Importantly, our dynamic-HVPE reactor enables us to deposit this device, which requires multiple abrupt changes in composition and doping, in a short growth time. We discuss next steps to improve the current result, with a clear pathway towards 30% efficiency. The potential for terrestrial applications of this lower cost III-V technology is also discussed.

14 SOLAR ENERGY↗

Optical properties of bulk gallium nitride single crystals grown by chloride–hydride vapor-phase epitaxy

A gallium nitride crystal 5 mm in thickness was grown by chloride–hydride vapor-phase epitaxy on a sapphire substrate, from which the crystal separated during cooling. At an early stage, a three-dimensional growth mode was implemented, followed by a switch to a two-dimensional mode. Spectra of exciton reflection, exciton luminescence, and Raman scattering are studied in several regions characteristic of the sample. Analysis of these spectra and comparison with previously obtained data for thin epitaxial GaN layers with a wide range of silicon doping enabled conclusions about the quality of the crystal lattice in these characteristic regions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Melting, ablation, and vapor phase condensation during atmospheric passage of the Bjurbole meteorite

A detailed study of the Bjurbole fusion crust using scanning electron microscopy (SEM) and energy dispersive analysis (EDS) shows that filamentary crystals and ablation spheres may form on the meteoroid surface. Filamentary crystals, hollow spheres, and porous regions of the surface point to a period of intense vapor phase activity during atmospheric passage. Filamentary crystals can be divided into three categories on the basis of bulk composition and morphology. Two types of filamentary crystals are vapor phase condensation products formed during atmospheric entry of the meteoroid. The other type forms by the interaction of seawater with the fusion surface. The density and composition of ablation spheres varies with the flight orientation of the meteorite. The size range and composition of iron-nickel spheres on the surface of Bjurbole are similar to spheres collected in the stratosphere. A comparison of stratospheric dust collections with meteorite surfaces may provide further insight into the mechanisms of meteoroid entry into planetary atmospheres.

Rietmeijer, F. J. M.↗

Tunnel Junction Development Using Hydride Vapor Phase Epitaxy

We demonstrate for the first time III-V tunnel junctions grown using hydride vapor phase epitaxy (HVPE) with peak tunneling currents >8 A/cm 2 , sufficient for operation of a multijunction device to several hundred suns of concentration. Multijunction solar cells rely on tunneling interconnects between subcells to enable series connection with minimal voltage loss, but tunnel junctions have never been shown using the HVPE growth method. HVPE has recently reemerged as a low-cost growth method for high-quality III-V materials and devices, including the growth of high-efficiency III-V solar cells. We previously showed single-junction GaAs solar cells with conversion efficiencies of ~24% with a path forward to equal or exceed the practical efficiency limits of crystalline Si. Moving to a multijunction device structure will allow for even higher efficiencies with minimal impact on cost, necessitating the development of tunnel interconnects. Here in this paper, we demonstrate the performance of both isolated HVPE-grown tunnel junctions, as well as single-junction GaAs solar cell structures with a tunnel junction incorporated into the contact region. We observe no degradation in device performance compared to a structure without the added junction.

14 SOLAR ENERGY↗

The influence of temperature on the polymerization of ethyl cyanoacrylate from the vapor phase

The polymerization of ethyl cyanoacrylate fumes from surface bound initiators is an important step in many novel and mature technologies. Understanding the effect of temperature on the rate of poly(ethyl cyanoacrylate) (PECA) growth and its molecular weight during its polymerization from the vapor phase from surface bound initiators provides insight into the important mechanistic aspects that impact the polymerizations success. In these studies, it is shown that the amount of PECA formed during the polymerization of ECA from a latent fingerprint increases with decreasing temperature, while the polymer molecular weight varies little. This is interpreted to be the result of the loosening of the ion pair that initiates the polymer chain growth and resides on the end of the growing polymer chain with decreasing temperature. Comparison of temperature effects and counter-ion studies show that in both cases loosening the ion pair results in the formation of more polymer with similar molecular weight, verifying this interpretation. These results further suggest that lowering the temperature may be an effective method to optimize anionic vapor phase polymerizations, including the improvement of the quality of aged latent prints and preliminary results are presented that substantiate this prediction.

36 MATERIALS SCIENCE↗

Review of Recent Advances in Applications of Vapor-Phase Material Infiltration Based on Atomic Layer Deposition

Polymer–inorganic hybrid nanocomposites exhibit enhanced material properties, combining the advantages of both their organic and inorganic subcomponents. Extensive research is being carried out to functionalize polymers towards various improved physicochemical characteristics such as electrical, optical, and mechanical properties for various applications. Vapor-phase material infiltration is an emerging hybridization route, derived from atomic layer deposition, which facilitates uniform incorporation of inorganic entities into a polymer matrix, leading to novel applications in fields such as microelectronics, energy storage, smart coatings, and smart fabrics. Recent advances in employing vapor-phase material infiltration as a hybridization and nanopatterning technique for various application avenues are reviewed.

36 MATERIALS SCIENCE↗

Formation and Ripening of Self-Assembled Multilayers from the Vapor-Phase Deposition of Dodecanethiol on Copper Oxide

Here, the vapor-phase reaction of dodecanethiol (DDT) with copper oxide surfaces and the molecular level composition and structure of the resulting films were examined. Atomic force microscopy, cross-sectional transmission electron microscopy, and electron energy loss/electron dispersive spectroscopy reveal that, instead of forming self-assembled monolayers, DDT etches CuO surfaces to create ~8 nm thick Cu-thiolate multilayers. These layers are composed of surprisingly well-ordered crystallites, oriented either parallel or perpendicular to the substrate surface. Pre-etching of the CuO to expose the underlaying copper metal is shown to prevent the formation of multilayers and instead allow for the formation of the expected monolayers. Water contact angle and Fourier transform infrared spectroscopy are further shown to be ineffective at distinguishing the multilayer and monolayer thiol films. Interestingly, the multilayer films are unstable in air, ripening into particles 20 μm wide and several hundred nanometers tall over the course of a week. Air exposure also leads to the slow oxidation of the sulfur and copper within the films at a rate similar to what has been seen before for DDT monolayers. As a result, the multilayers show no significant improvement over monolayers in the prevention of oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of mass diffusion on the stability of thermophoretic growth of a solid from the vapor phase

The stability of solid planar growth from a binary vapor phase with a condensing species dilute in a carrier gas is examined when the ratio of depositing to carrier species molecular mass is large and the main diffusive transport mechanism is thermal diffusion. It is shown that a deformation of the solid-gas interface induces a deformation of the gas phase isotherms that increases the thermal gradients and thereby the local mass deposition rate at the crests and reduces them at the valleys. The initial surface deformation is enhanced by the modified deposition rates in the absence of appreciable Fick/Brownian diffusion and interfacial energy effects.

Castillo, J. L.↗

An Evaluation of the Vapor Phase Catalytic Ammonia Removal Process for Use in a Mars Transit Vehicle

An experimental program has been developed to evaluate the potential of the Vapor Phase Catalytic Ammonia Reduction (VPCAR) technology for use as a Mars Transit Vehicle water purification system. Design modifications which will be required to ensure proper operation of the VPCAR system in reduced gravity are also evaluated. The VPCAR system is an integrated wastewater treatment technology that combines a distillation process with high temperature catalytic oxidation. The distillation portion of the system utilizes a vapor compression distillation process to provide an energy efficient phase change separation. This portion of the system removes any inorganic salts and large molecular weight, organic contaminates, i.e., non-volatile, from the product water stream and concentrates these contaminates into a byproduct stream. To oxidize the volatile organic compounds and ammonia, a vapor phase, high temperature catalytic oxidizer is used. This catalytic system converts these compounds along with the aqueous product into CO2, H2O, and N2O. A secondary catalytic bed can then be used to reduce the N2O to nitrogen and oxygen (although not evaluated in this study). This paper describes the design specification of the VPCAR process, the relative benefits of its utilization in a Mars Transit Vehicle, and the design modification which will be required to ensure its proper operation in reduced gravity. In addition, the results of an experimental evaluation of the processors is presented. This evaluation presents the processors performance based upon product water purity, water recovery rates, and power.

Flynn, Michael↗