Search NASA⌕ Search

SEARCH · Search NASA

Results for “VELOCITY PROFILE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Noise radiated from inverted velocity profile jets under simulated flight

Measurements were made of the noise radiated by an inverted profile coannular jet. The measurements were made inside an anechoic chamber and forward flight was simulated with an open jet surrounding a coannular nozzle. The diameters of the center and the annular nozzles were 1.27 cm and 2.03 cm, respectively. The open jet wind tunnel was 17.1 cm in diameter and could be operated at speeds up to 150 m/sec. Noise measurements were made in the acoustic far field at several spherical angles ranging from 20 deg to 120 deg relative to the jet axis. Flow through the center jet decreased the noise radiated by the annular jet. The addition of forward velocity further decreased the noise, and the two noise reductions seem to be additive. Measurements of the mean velocity profile demonstrate that forward flight reduced the growth rate of the high speed annular jet, and that center flow reduced the rate of merging of the annular jet.

Petersen, R. A.↗
NASA NTRS2010

Multiple Velocity Profile Measurements in Hypersonic Flows Using Sequentially-Imaged Fluorescence Tagging

Nitric-oxide planar laser-induced fluorescence (NO PLIF) was used to perform velocity measurements in hypersonic flows by generating multiple tagged lines which fluoresce as they convect downstream. For each laser pulse, a single interline, progressive scan intensified CCD (charge-coupled device) camera was used to obtain two sequential images of the NO molecules that had been tagged by the laser. The CCD configuration allowed for sub-microsecond acquisition of both images, resulting in sub-microsecond temporal resolution as well as sub-mm spatial resolution (0.5-mm horizontal, 0.7-mm vertical). Determination of axial velocity was made by application of a cross-correlation analysis of the horizontal shift of individual tagged lines. A numerical study of measured velocity error due to a uniform and linearly-varying collisional rate distribution was performed. Quantification of systematic errors, the contribution of gating/exposure duration errors, and the influence of collision rate on temporal uncertainty were made. Quantification of the spatial uncertainty depended upon the signal-to-noise ratio of the acquired profiles. This velocity measurement technique has been demonstrated for two hypersonic flow experiments: (1) a reaction control system (RCS) jet on an Orion Crew Exploration Vehicle (CEV) wind tunnel model and (2) a 10-degree half-angle wedge containing a 2-mm tall, 4-mm wide cylindrical boundary layer trip. The experiments were performed at the NASA Langley Research Center's 31-Inch Mach 10 Air Tunnel.

Bathel, Brett F.↗
NASA NTRS1996

An Estimate of Solar Wind Density and Velocity Profiles in a Coronal Hole and a Coronal Streamer

Using the total electron content data obtained by the Ulysses Solar Corona Experiment (SCE) during the first solar conjunction in summer 1991, two data sets were selected, one associated with a coronal hole and the other associated with coronal streamer crossings. In order to determine coronal streamer density profiles, the electron content of the tracking passes embedded in a coronal streamer were corrected for the contributions from coronal hole densities.

coronal density coronal velocity velocity profiles↗
NASA NTRS1986

Instantaneous velocity profile measurements in a turbulent boundary layer

Instantaneous wall shear stress and streamwise velocities have been measured simultaneously in a flat-plate, turbulent boundary layer at moderate Reynolds number in an effort to provide experimental support for large eddy simulations. Data were obtained using a buried-wire, wall shear gage and a hot-wire rake positioned in the log region of the flow. Fluctuations of the instantaneous U(+) versus Y(+) profiles about a mean law of the wall are shown to be significant and complex. Peak cross-correlation values between wall shear stress and the velocities are high, and reflect the passage of a large structure inclined at a small angle to the wall. Estimates of this angle are consistent with those made by other investigators. Conditional sampling techniques were used to detect the passage of various sizes and types of flow disturbances (events), and to estimate their mean frequency of occurrence. Events characterized by large aand sudden streamwise accelerations were found to be highly coherent throughout the log region and were strongly correlated with large fluctuations in wall shear stress. Phase randomness between the near-wall quantities and the outer velocities was small. The results suggest that the flow events detected by conditional sampling applied to velocities in the log region may be related to the bursting process.

Robinson, S. K.↗
NASA NTRS1972

Wind velocity profiles measured by the smoke-trail method at the Eastern Test Range, 1964

Twenty-six detailed wind profiles measured by the smoke trail technique at the Eastern Test Range during the first seven months of 1964 are presented as plots of west-to-east and south-to-north velocity components at height intervals of 25 meters. The overall altitude ranges of the profiles vary from about 2.6 to 19.1 km. The wind measurements, which were made under a variety of conditions, include velocities in excess of the 90- and 95-percent highest values for the Eastern Test Range. The report also includes a listing of the wind profiles, their maximum velocities and direction of the maximum velocities, measured by the smoke trail method at the Eastern Test Range from 1962 to 1964.

Manning, J. C.↗
NASA NTRS1976

Wall-wake velocity profile for compressible nonadiabatic flows

The paper suggests a new form of the wall-wake profile which is applicable to flows with heat transfer, and for which the velocity gradient at the boundary-layer edge is zero. The modified profile - which takes into account the effect of turbulent Prandtl number - is found to provide a good representation of experimental data for a wide range of Mach numbers and heat transfer. The skin friction coefficient values determined by a least squares fit of the profile to the data are in good agreement with values measured by the floating element technique. The values of boundary-layer thickness determined by the fit correspond more closely to the outer edge of the viscous flow region than those obtained with earlier versions of the wall-wake profile.

Sun, C.-C.↗
NASA NTRS1991

Work performed on velocity profiles in a hot jet by simplified RELIEF

The Raman Excitation + Laser Induced Electronic Fluorescence (RELIEF) velocity measurement method is based on vibrationally tagging oxygen molecules and observing their displacement after a short period of time. Two papers that discuss the use and implementation of the RELIEF technique are presented in this final report. Additionally, the end of the report contains a listing of the personnel involved and the reference documents used in the production of this final report.

Miles, Richard B.↗
NASA NTRS1988

Radial Alfven velocity profiles in the magnetosphere and their relation to ULF wave field-line resonances

The radial Alfven velocity, V(A), in the magnetosphere was investigated using magnetic field and plasma data from the ISEE-1 spacecraft. The harmonic frequency structure calculated from these data was compared with the observed resonant wave structure in the frequency range 5-100 mHz and over the region L = 3-9. It was found that the frequency of these resonances depend on the A(V), which is a function of the magnetic field strength and plasma density. The toroidal mode resonance frequency structure was modeled for the first four harmonics, with excellent agreement between the modeled and observed harmonics for a passs which does not show a plasmapause gradient. In the presence of a steep plasmapause gradient, the model was found to predict a correspondingly steep increase in the resonance frequencies at the plasmapause, by about 5 mHz for the first harmonic and by 20 mHz for the fourth harmonic. Special consideration is given to the effect of heavy ion mass loading on the modeling.

Fraser, B. J.↗
NASA NTRS2010

Multiple Velocity Profile Measurements in Hypersonic Flows using Sequentially-Imaged Fluorescence Tagging

Nitric-oxide planar laser-induced fluorescence (NO PLIF) was used to perform velocity measurements in hypersonic flows by generating multiple tagged lines which fluoresce as they convect downstream. For each laser pulse, a single interline, progressive scan intensified CCD camera was used to obtain separate images of the initial undelayed and delayed NO molecules that had been tagged by the laser. The CCD configuration allowed for sub-microsecond acquisition of both images, resulting in sub-microsecond temporal resolution as well as sub-mm spatial resolution (0.5-mm x 0.7-mm). Determination of axial velocity was made by application of a cross-correlation analysis of the horizontal shift of individual tagged lines. Quantification of systematic errors, the contribution of gating/exposure duration errors, and influence of collision rate on fluorescence to temporal uncertainty were made. Quantification of the spatial uncertainty depended upon the analysis technique and signal-to-noise of the acquired profiles. This investigation focused on two hypersonic flow experiments: (1) a reaction control system (RCS) jet on an Orion Crew Exploration Vehicle (CEV) wind tunnel model and (2) a 10-degree half-angle wedge containing a 2-mm tall, 4-mm wide cylindrical boundary layer trip. The experiments were performed at the NASA Langley Research Center's 31-inch Mach 10 wind tunnel.

Bathel, Brett F.↗
NASA NTRS1972

Wind velocity profiles measured by the smoke-trail method at Wallops Island, Virginia, 1965 - 1969

Thirty-nine detailed wind profiles measured by the smoke-trail method at the Wallops Island Test Range during the years 1965 through 1969 are presented as west-to-east and south-to-north velocity components at height intervals of 25 meters. The overall altitude range of the wind profile data varies from about 1 to 23 km. The wind measurements, which were made under a variety of conditions, include velocities in excess of the annual 99-percent highest wind value (the wind value which will not be exceeded 99 percent of the time) for the Wallops Island Test Range. The report also includes a listing of the wind soundings and their maximum velocities and direction of the maximum velocities measured at Wallops Island from 1959 through 1969. Results of smoke-trail enhancement experiments are also indicated.

Rhyne, R. H.↗
NASA NTRS1979

Velocity profiles of the 2.1 micron H2 emission line in the Orion molecular cloud

Spectra of the H2 nu = 1-0 S(1) emission line in Orion, observed at various positions with a resolution of 20 km/s, are presented. The intrinsic full width at half-maximum of the line ranges from 18 to 58 km/s over the observed positions. Analysis of the line profiles shows that the emitting gas is probably expanding from a region near the BN and KL infrared sources at velocities typically of 40 km/s but as high as 100 km/s, and that it is associated with the source of the broad lines seen in the spectra of many other molecules. Strong constraints are placed on models of the physical processes responsible for the broad emission lines.

Nadeau, D.↗
NASA NTRS1983

Inverted velocity profile semi-annular nozzle jet exhaust noise experiments

Experimental noise data are shown for a conical nozzle with a semi-annular secondary flow passage having secondary to primary velocity ratios ranging from 1.0 to 1.4. Spectral data are presented at different directivity angles in the flyover plane with the semi-annular flow passage located either on the same side or opposite side relative to an observer. A 10.0 cm diameter primary conical nozzle was used with a 2.59 cm and 5.07 cm wide annular gap secondary nozzle. Similar trends were observed for both nozzle configurations. In general, near the peak noise location and at velocity ratios greater than 1.0, noise levels were larger on the side where the secondary passage was closest to an observer. At velocity ratios near 1.0 the opposite was true. When compared to predicted noise levels for a conical nozzle alone operating at the same ideal thrust, the semi-annular configuration showed no benefit in terms of noise attenuation.

Goodykoontz, J. H.↗
DOE OSTI2024

AWAKEN-ABLWF22 CLAMPS1 Doppler Lidar Vertical Velocity Profiles

These files contain 24 hour periods of data collected from the CLAMPS1 Halo Streamline Doppler lidar. While not conducting other scans, the lidar directs the beam to zenith, allowing for the measurement of vertical velocity. These data were collected during the American Wake Experiment (AWAKEN) project. The CLAMPS1 facility was deployed at the Rolling Meadows Golf Course east of Enid, OK.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

AWAKEN CLAMPS2 Doppler Lidar Vertical Velocity Profiles

These files contain 24 hour periods of data collected from the CLAMPS2 Halo Streamline XR+ Doppler lidar. While not conducting other scans, the lidar directs the beam to zenith, allowing for the measurement of vertical velocity. These data were collected during the AWAKEN project.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1983

Velocity profiles of interplanetary shocks

The type 2 radio burst was identified as a shock propagating through solar corona. Radio emission from shocks travelling through the interplanetary (IP) medium was observed. Using the drift rates of IP type II bursts the velocity characteristics of eleven shocks were investigated. It is indicated that shocks in the IP medium undergo acceleration before decelerating and that the slower shocks take longer to attain their maximum velocity.

Cane, H. V.↗