SEARCH · Search NASA
Results for “Void fraction”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Plasma treatment on both adhesive tape and adherends for significantly enhanced CFRTP-related adhesive joints
Unlike existing literature that primarily concentrates on either the plasma treatment of adherends alone or solely on adhesive surfaces, this work leverages plasma modification of both adhesive in tape form and adherend surfaces to largely enhance the interfacial bonding between a thermoset-based adhesive tape and carbon-fiber-reinforced thermoplastic polymer (CFRTP) for structural bonding applications. Here, by conducting single lap shear tests on adhesively-bonded AA6061-CFRPPA (carbon-fiber-reinforced polyphthalamide) dissimilar joints, it is shown that the plasma treatment of adherends alone can increase the lap shear strength (LSS) of the joints by approximately 200% compared to non-treated counterparts. An additional plasma treatment of adhesive tape surfaces leads to even higher LSS improvement, reaching up to 315%, due to the formation of a denser crosslinked network of covalent bonds and a reduced area fraction of interfacial voids at the CFRPPA/adhesive interface. The highest plasma-enhanced LSS of the metal-CFRTP dissimilar joints rivals that of metal-metal joints, which is typically stronger than the joints associated with fiber-reinforced polymers. This study is important for achieving strong CFRTP-related structural components bonded using adhesive tape, providing better compatibility with plasma treatment and other joining methods like riveting compared to adhesive paste or liquid.
Micro-structural features and material properties impact on adhesive metal joints via computational modeling and machine learning
The quality of structural bonding in practical applications depends on various factors arising from materials, pre-processing conditions, and manufacturing. Understanding how these factors influence bonding performance and determining their relative importance are of significant interest. Thus, this study evaluates the effects of microstructural features and material properties on the structural strength of adhesively-bonded metal joints at the submillimeter scale, utilizing a combination of Finite Element Modeling (FEM) and Machine Learning (ML) with Gradient Boosting Regression (GBR). The microstructural features include adhesive thickness, internal voids within the adhesive, adherend-adhesive interfacial voids, void size and volume fraction, and surface roughness. The material properties include the constitutive behavior of the adhesive, as well as the adherend-adhesive interfacial strength and fracture energy. The changes in structural strength and morphologies of the bonded metal structures with respect to different microstructural features and material properties were clarified by FEM. By further leveraging ML-GBR, the sequence of importance of these factors affecting bonding performance across various scenarios was summarized. This work provides valuable insights into the development of improved structural bonding for adhesive joints in industries such as automotive , aerospace, and beyond.
Role of Intersections in Fracture Connectivity
Networks of intersecting fractures often provide the flow paths through subsurface reservoirs. Assessing network connectivity is challenging because fracture intersections compose a vanishingly small fraction of the network void volume. In this paper, motivated by 3D X-ray imaging of the simplest element of fracture network, that is, two orthogonal fractures, we perform a percolation and finite-size scaling analysis to study the connectivity provided by fracture intersections. The conditions when an intersection enhances connectivity across a sample depend on spatial correlations in the fracture aperture distributions, on the stress state, and on the direction of flow. Here we consider three flow directions: (a) across intersections, (b) parallel to intersections and (c) around corners. For (a), intersections provide minimal enhancement of connectivity because they contribute little additional void area. For (b), intersections increase the probability of a connected path near threshold by enabling 3D connected pathways that are not possible in parallel fractures. Flow around corners, (c), is fundamentally the result of the intersection connecting two fractures in series and spatial correlations are broken around corners, suppressing the connectivity relative to (a). When the connected fractures are stressed equally, a joint percolation threshold emerges that continues to have scale invariance. However, when the fractures are stressed unequally, the system has mixed percolation without clearly defined percolation thresholds. In all cases, percolation probabilities are found to be scale dependent which has important consequences for the connectivity of larger fracture networks composed of the fundamental element studied here.
How galaxies populate halos in extreme density environments: An analysis of the halo occupation distribution in SDSS
Recent works have shown that the properties of galaxy populations in simulated dark matter halos vary with large-scale environments. These results suggest a variation in the halo occupation distribution (HOD) in extreme density environments since the dynamical and astrophysical conditions prevailing in these regions may significantly affect the formation and evolution of their halos and residing galaxies, influencing the mean number of satellite galaxies. To analyse these effects, we identify cosmic voids and future virialised structures (FVS) in the Sloan Digital Sky Server Data Release 12 (SDSS-DR12) and estimate the HOD within these super-structures using group catalogues as dark matter halo proxies. Our goal is to use observational galaxy data to characterise the HOD within cosmic voids and FVS, explore the different properties of these galaxies populations and compare them with the general results outside these super-structures. We use a publicly available observational galaxy catalogue with information on redshifts, positions, magnitudes and other astrophysical features to build a volume complete galaxy sample and identify cosmic voids and FVS. Using a publicly available galaxy group catalogue as a proxy to dark matter halos, we compute the HOD within both types of super-structures for different absolute magnitude thresholds. We also study the dependence on the results on the main void and FVS properties, density and volume. We also analysed the main characteristics of the stellar content of galaxies inside these extreme-density regions such as the mean stellar age and the galaxy light concentration index. In all cases, we compare the results with those derived from the Field sample, defined by objects outside both types of environments. Inside cosmic voids, we find a strong decrease in HOD concerning the Field results. In the most extreme cases, the mean number of satellites fall to ~ 50%. Inside FVS, the HOD shows a significant increase to the Field, with a ~ 40% excess in the mean number of satellites. These results are present for the different galaxy luminosity ranges explored. In both environments, the differences with respect to the Field increases for the extreme values of the density environments. However, we obtain no signs of variations related to intrinsic characteristics of the super-structures, indicating that the effects depend mainly on the density of the large-scale environment. In addition, we find that the cumulative distribution of the mean age of stars of the central galaxy also varies in the different regions, this suggests that the history of the formation of the dark matter halos may be different. Finally, we explore the HOD for the 25% youngest (oldest) galaxies, based on the mean age of their stars. We find that for the low-mass groups the youngest galaxies are only present inside voids and are generally central galaxies. On the other hand, for the high-mass groups the FVS environments show the same increase in the HOD concerning the Field as previously mentioned. We find that cosmic voids lack a significant fraction of galaxies with the oldest stellar population.
The impact of void environment on AGN
ABSTRACT We study the population of active galaxies in void environment in the Sloan Digital Sky Survey. We use optical spectroscopic information to analyse characteristics of the emission lines of galaxies, accomplished by WHAN and BPT diagrams. Also, we study Wide-field Infrared Survey Explorer(WISE) mid-IR colours to assess active galactic nucleus (AGN) activity. We investigate these different AGN classification schemes, both optical and mid-IR, and their dependence on the spatial location with respect to the void centres. To this end, we define three regions: void, the spherical region defined by voidcentric distance relative to void radius (distance/rvoid) smaller than 0.8, comprising overdensities lesser than −0.9, an intermediate/transition shell region (namely, void-wall) 0.8 < distance/rvoid < 1.2, and a region sufficiently distant from voids, the field: distance/rvoid > 2. We find statistical evidence for a larger fraction of AGN and star-forming galaxies in the void region, regardless of the classification scheme addressed (either BPT, WHAN, or WISE). Moreover, we obtain a significantly stronger nuclear activity in voids compared to the field. We find an unusually large fraction of the most massive black holes undergoing strong accretion when their host galaxies reside in voids. Our results suggest a strong influence of the void environment on AGN mechanisms associated with galaxy evolution.
Eigenfrequency constrained topology optimization of finite strain hyperelastic structures
This paper incorporates hyperelastic materials, nonlinear kinematics, and preloads in eigenfrequency constrained density–based topology optimization. The formulation allows for initial finite deformations and subsequent small harmonic oscillations. The optimization problem is solved by the method of moving asymptotes, and the gradients are calculated using the adjoint method. Both simple and degenerate eigenfrequencies are considered in the sensitivity analysis. A well-posed topology optimization problem is formulated by filtering the volume fraction field. Numerical issues associated with excessive distortion and spurious eigenmodes in void regions are reduced by removing low volume fraction elements. The optimization objective is to maximize stiffness subject to a lower bound on the fundamental eigenfrequency. Numerical examples show that the eigenfrequencies drastically change with the load magnitude, and that the optimization is able to produce designs with the desired fundamental eigenfrequency.
Engineered Cementitious Composites (ECC) with limestone calcined clay cement (LC 3 )
Recent research have recognized that coupled use of calcined clay, limestone and cement clinker in concrete is viable to reduce environmental footprints at manufacture and to enhance material durability. In this study, a novel application of the limestone calcined clay cement (LC 3 ) is demonstrated by substituting the Ordinary Portland Cement (OPC) in Engineered Cementitious Composites (ECC). The composite mechanical properties including σ-δ and σ-ε relationships and residual crack widths were evaluated to 28 days under uniaxial tension. Matrix chemistry was characterized using thermogravimetric analysis and X-ray diffraction, while the pore structure of matrices and composites was analyzed using mercury intrusion porosimetry. The LC 3 -based ECC showed more rapid early strength development but lower 28-day strength (~32 MPa) due to a 20% higher water-to-solid ratio for attaining adequate workability and fiber dispersion. Nevertheless, the tensile strain capacity of LC 3 -based ECC achieved over 6% with an average residual crack width less than 50 μm. Additionally, the composite pore structure exhibited a decreasing volume fraction of large pores and voids (>100 nm) after substituting LC 3 for OPC. Here, the use of LC 3 marginally decreased the embodied material energy and cost, but led to about 32% and 28% reductions in CO 2 emissions compared to traditional OPC-based ECC and concrete, respectively. As a preliminary study, LC 3 -based ECC shows promise as a greener ductile concrete compared with OPC-based ECC.
Implementation of two-phase gas transport into VERA for molten salt reactor analysis
Molten salt reactors (MSRs) are a class of next-generation nuclear reactors that have received recent industrial and research interest. A generalized species transport solver was implemented in the Virtual Environment for Reactor Applications (VERA) computing suite to extend this tool to analyze liquid-fueled MSRs. This core simulator has been extended to model the transport of fission product gases into a collection of circulating gas bubbles with the purpose of removing the gases. This paper presents the governing species transport equation, along with various nuclear source terms. Development of the source term for phase migration is discussed, along with a simplified interfacial area tracking method. Finally, a case study on a simplified MSR loop is presented in which modeling parameters were varied to assess their impact on gas removal. The steady state results show that parameters such as bubble diameter, gas injection rate and mass transfer coefficient have a low to moderate effect on the fraction of xenon in the core region. Removal efficiency has the greatest effect on the fraction in the core region. After the pump bowl, bubble diameter has a minor effect on the fraction of xenon in the gas void. Finally, these results point out that increasing parameters such as mass transfer coefficient, gas injection rate, and removal efficiency drives the xenon into the circulating gas void, while decreasing bubble diameter also drives xenon into the gas void by increasing interfacial area.
Statistical properties of filaments in the cosmic web
ABSTRACT In the context of the cosmological and constrained Exploring the Local Universe with the reConstructed Initial Density field (ELUCID) simulation, this study explores the statistical characteristics of filaments within the cosmic web, focussing on aspects such as the distribution of filament lengths and their radial density profiles. Using the classification of the cosmic web environment through the Hessian matrix of the density field, our primary focus is on how cosmic structures react to the two variables $R_{\rm s}$ and $\lambda _{\rm th}$. The findings show that the volume fractions of knots, filaments, sheets, and voids are highly influenced by the threshold parameter $\lambda _{\rm th}$, with only a slight influence from the smoothing length $R_{\rm s}$. The central axis of the cylindrical filament is pinpointed using the medial-axis thinning algorithm of the COsmic Web Skeleton (COWS) method. It is observed that median filament lengths tend to increase as the smoothing lengths increase. Analysis of filament length functions at different values of $R_{\rm s}$ indicates a reduction in shorter filaments and an increase in longer filaments as $R_{\rm s}$ increases, peaking around $2.5R_{\rm s}$. The study also shows that the radial density profiles of filaments are markedly affected by the parameters $R_{\rm s}$ and $\lambda _{\rm th}$, showing a valley at approximately $2R_{\rm s}$, with increases in the threshold leading to higher amplitudes of the density profile. Moreover, shorter filaments tend to have denser profiles than their longer counterparts.
Analyzing the cosmic web environment in the vicinity of grand-design and flocculent spirals with local geometric index
We explore the environment of a combined set of 367 grand-design and 619 flocculent spiral galaxies. We introduce a novel estimator called the local geometric index to quantify the morphology of the local environment of these 986 spirals. The local geometric index allows us to classify the environment of galaxies into voids, sheets, filaments, and clusters. We find that grand-designs are mostly located in dense environments like clusters and filaments (∼ 78%), whereas the fraction of the flocculents lying in sparse environments like voids and sheets is significantly higher (> 10%) than that of the grand-designs. A p-value < 10 -3 from a Kolmogorov-Smirnov test indicates that our results are statistically significant at 99.9% confidence level. Further, we note that dense environments with large tidal flows are dominated by the grand-designs. On the other hand, low-density environments such as sheets and voids favor the growth of flocculents.
High-Resolution X-ray Spectromicroscopy Reveals Process-Structure Correlations in sub-5-μm Diameter Carbon Nanotube-Polymer Composite Dry-Spun Yarns
A persistent lack of detailed and quantitative structural analysis of these hierarchical carbon nanotube (CNT) ensembles precludes establishing processing-structure-property relationships that are essential to enhance macroscale performance (e.g., in mechanical, electrical, thermal applications). Here, in this work, we use scanning transmission X-ray microscopy (STXM) to analyze the hierarchical, twisted morphology of dry-spun CNT yarns and their composites, quantifying key structural characteristics such as density, porosity, alignment, and polymer loading. As the yarn twist density increases (15,000 to 150,000 turns per meter), the yarn diameter decreased (4.4–1.4 μm) and density increased (0.55–1.26 g·cm –3 ), as intuitively expected. Yarn density, ρ, ubiquitously scaled with diameter d according to ρ ~ d –2 for all parameters studied here. Spectromicroscopy probes with 30 nm resolution and elemental specificity were employed to analyze the radial and longitudinal distribution of the oxygen-containing polymer content (~30% weight fraction), demonstrating nearly perfect filling of the voids between CNTs with a vapor-phase polymer coating and cross-linking process. These quantitative correlations highlight the intimate connections between processing conditions and yarn structure with important implications for translating the nanoscale properties of CNTs to the macroscale.
Using elliptical galaxy kinematics to compare the strength of gravity in cosmological regions of differing gravitational potential – a first look
ABSTRACT Various models of modified gravity invoke ‘screening’ mechanisms that are sensitive to the value of the local gravitational potential. This could have observable consequences for galaxies. These consequences might be seen by comparing two proxies for galaxy mass – their luminosity and their internal kinematics – as a function of local galaxy density. Motivated by this prospect, we have compared the observed properties of luminous red galaxies (LRGs) inside and outside of voids in the cosmic large scale structure. We used archival measurements of line widths, luminosities, redshifts, colours, and positions of galaxies in conjunction with recent void catalogues to construct comparison LRG samples inside and outside of voids. We fitted these two samples to the well-established fundamental plane of elliptical galaxies to constrain any differences between the inferred value of the Newtonian gravitational constant G for the two samples. We obtained a null result, with an upper limit on any fractional difference in G within and outside of cosmological voids to be α = δG/G ∼ 40 per cent. This upper bound is dominated by the small-number statistics of our N ∼ 100 within-void LRG sample. With the caveat that environmental effects could influence various parameters such as star formation, we estimate that a 1 per cent statistical limit on α could be attained with data from 105 elliptical galaxies within voids. This is within the reach of future photometric and spectroscopic surveys, both of which are required to pursue this method.
A simple, validated approach for design of two-dimensional periodic particle patterns via acoustophoresis
Two-dimensional patterning of microparticles enables a wide range of functional materials, including patterned energy storage electrodes, flexible electronics, and sensor arrays. Particle patterning via acoustics offers an attractive path to generate a wide variety of 2D periodic patterns that introduce tailorable hierarchical porosity, useful for controlling surface area, transport distances, and other properties. This method is most effective with micron scale particles and patterns of tens to hundreds of microns. To enable systematic exploration of the broad design space for such patterns, this work develops a model of 2D and 3D assembly of particles at high loadings and validates the obtained patterns against both experiments and more computationally intensive modeling techniques. Using this simple model, connections are mapped between input parameters (like actuation conditions, particle volume fraction, material properties) and output geometrical features (like void size and shape, pattern connectivity, and surface area) so that they can be tailored to given applications. The utility of this simple model is illustrated by predicting and then experimentally demonstrating new hierarchical patterns resulting from multiple waves of different frequencies interacting. These multiscale patterns offer the potential to lift the limits on surface area, diffusion distances, and other features.
An examination of the precipitation behavior of proton irradiated dual phase 308L weldment filler materials
Voids, G phase particles, and Ni-Si rich clusters in proton irradiated dual phase 308L groove filler of a SA508–304 L dissimilar metal weldment are analyzed using advanced characterization techniques. These weldments are often used in light water nuclear reactors and are subject to enhanced corrosion and associated stress corrosion cracking (SCC). Radiation damage is known to accelerate SCC. Ni-Si enriched clusters were observed in proton irradiated γ austenite, while G phase M 6 Ni 16 Si 7 (where M transition metal element) precipitates were observed in proton irradiated δ ferrite. Compositional analysis of the G phase precipitates and Ni-Si clusters from STEM-EDS and APT are compared. Unlike G phase particles in proton irradiated δ ferrite, Ni-Si clusters in proton irradiated γ austenite are not rich in Mn. Both STEM-EDS and APT line-scan profiles of the Ni-Si clusters show that the Fe and Cr concentration gradient between matrix γ austenite and the Ni-Si clusters is not as sharp as those between matrix δ ferrite and G phase. Further, HR-STEM imaging indicates that the lattice parameter of the Ni-Si clusters is commensurate with γ austenite and the clusters do not represent the precipitation of a second phase. Finally, our analysis demonstrates the density and volume fraction of G phase particles and the density of voids scales with proton irradiation damage and the energy to recoils.
Dark Energy Survey Year 3 results: Curved-sky weak lensing mass map reconstruction
ABSTRACT We present reconstructed convergence maps, mass maps, from the Dark Energy Survey (DES) third year (Y3) weak gravitational lensing data set. The mass maps are weighted projections of the density field (primarily dark matter) in the foreground of the observed galaxies. We use four reconstruction methods, each is a maximum a posteriori estimate with a different model for the prior probability of the map: Kaiser–Squires, null B-mode prior, Gaussian prior, and a sparsity prior. All methods are implemented on the celestial sphere to accommodate the large sky coverage of the DES Y3 data. We compare the methods using realistic ΛCDM simulations with mock data that are closely matched to the DES Y3 data. We quantify the performance of the methods at the map level and then apply the reconstruction methods to the DES Y3 data, performing tests for systematic error effects. The maps are compared with optical foreground cosmic-web structures and are used to evaluate the lensing signal from cosmic-void profiles. The recovered dark matter map covers the largest sky fraction of any galaxy weak lensing map to date.
The large-scale environment of thermonuclear and core-collapse supernovae
ABSTRACT The new generation of wide-field time-domain surveys has made it feasible to study the clustering of supernova (SN) host galaxies in the large-scale structure (LSS) for the first time. We investigate the LSS environment of SN populations, using 106 dark matter density realisations with a resolution of ∼3.8 Mpc, constrained by the 2M+ + galaxy survey. We limit our analysis to redshift z < 0.036, using samples of 498 thermonuclear and 782 core-collapse SNe from the Zwicky Transient Facility’s Bright Transient Survey and Census of the Local Universe catalogues. We detect clustering of SNe with high significance; the observed clustering of the two SNe populations is consistent with each other. Further, the clustering of SN hosts is consistent with that of the Sloan Digital Sky Survey (SDSS) Baryon Oscillation Spectroscopic Survey DR12 spectroscopic galaxy sample in the same redshift range. Using a tidal shear classifier, we classify the LSS into voids, sheets, filaments, and knots. We find that both SNe and SDSS galaxies are predominantly found in sheets and filaments. SNe are significantly under-represented in voids and over-represented in knots compared to the volume fraction in these structures. This work opens the potential for using forthcoming wide-field deep SN surveys as a complementary LSS probe.
Effects of baryonic feedback on the cosmic web
Here, we study the effect of baryons on the cosmic web—halos, filaments, walls, and voids. To do so, we apply a modified version of NEXUS, a cosmic web morphological analysis algorithm, to the IllustrisTNG simulations. We find that halos lose more than 10% of their mass due to baryons, mostly to filaments and a small portion to walls and voids. However, the mass transfer does not significantly shift the boundaries of structures, leaving the volume fractions of the cosmic structures largely unaffected. We quantify the effects of baryonic feedback on the power spectrum and the probability density function of the density field for individual cosmic structures. For the power spectrum, most suppression due to feedback can be accounted for by including M ≥ 10 12 M ⊙ /h halos, without considering other cosmic structures. However, when examining the probability density function of the density field, we find nearly 100% suppression of the emptiest regions and 10%-level effects (boost or suppression) in the remaining regions of filaments, walls, and voids. Our results indicate the importance of modeling the effects of baryons in the whole cosmic web, not just halos, for cosmological analysis beyond two-point statistics or field-based inferences.