Search NASA⌕ Search

SEARCH · Search NASA

Results for “Workspaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Experiments in identification and control of flexible-link manipulators

Interest in the study of flexible-link manipulators for space-based applications has risen strongly in recent years. Moreover, numerous experimental results have appeared for the various problems in the modeling, identification and control of such systems. Nevertheless, relatively little literature has appeared involving laboratory verification of tuning controllers for certain types of realistic flexible-link manipulators. Specifically flexible-link manipulators which are required to maintain endpoint accuracy while manipulating loads that are possibly unknown and varying as they undergo disturbance effects from the environment and workspace. Endpoint position control of flexible-link manipulators in these areas are discussed, with laboratory setups consisting of one and two-link manipulators.

Yurkovich, Stephen↗
NASA NTRS1989

Computer simulation and design of a three degree-of-freedom shoulder module

An in-depth kinematic analysis of a three degree of freedom fully-parallel robotic shoulder module is presented. The major goal of the analysis is to determine appropriate link dimensions which will provide a maximized workspace along with desirable input to output velocity and torque amplification. First order kinematic influence coefficients which describe the output velocity properties in terms of actuator motions provide a means to determine suitable geometric dimensions for the device. Through the use of computer simulation, optimal or near optimal link dimensions based on predetermined design criteria are provided for two different structural designs of the mechanism. The first uses three rotational inputs to control the output motion. The second design involves the use of four inputs, actuating any three inputs for a given position of the output link. Alternative actuator placements are examined to determine the most effective approach to control the output motion.

Marco, David↗
NASA NTRS1990

Experiments in identification and control of flexible-link manipulators

A report is presented on an ongoing effort for end-point position control of flexible-link manipulators under realistic conditions in laboratory setups consisting of one- and two-link manipulators. The authors treat modeling, identification, and control of flexible-link manipulators that are required to carry payloads, possibly unknown and varying, while undergoing disturbance effects from the environments and the workspace. The various identification and control techniques being investigated are summarized, with emphasis on the ability of the controller to adjust to changes in dynamics, payload, and working environment. It is found that time-domain methods offer identified model structures that are readily available for control design, whereas frequency-domain methods, particularly the time-varying transfer function estimation approach developed for this application, are more desirable when rapid controller tuning is required.

Yurkovich, Stephen↗
NASA NTRS1989

Visual direction as a metric of virtual space

Two experiments examine the abilities of ten subjects to visualize directions shown on a perspective display. Subjects indicated their perceived directions by adjusting a head-mounted cursor to correspond to the direction depicted on the display. This task is required of telerobotic operators who use map-like pictures of their workspace to determine the direction of objects seen by direct view. Results show significant open-loop judgment biases that may be composed of errors arising from misinterpretation of the map geometry and overestimation of gaze direction.

Ellis, Stephen R.↗
NASA NTRS1989

Dynamic analysis of a 6 DOF CKCM robot end-effector for dual-arm telerobot systems

A dynamical analysis is performed for a six DOF robot end-effector built to study telerobotic service and maintenance of NASA hardwares in space. The design of the end-effector is based on the concept of closed-kinematic chain mechanism capable of performing precise motion in a small workspace. After presenting a closed-form solution for the inverse kinematic problem, the Lagrangian approach is used to derive a set of equations of motion for the end-effector where the generalized coordinates are selected to be the Cartesian coordinates. A computer simulation study shows that the centrifugal and Coriolis terms can be neglected for slow motion.

Nguyen, Charles C.↗
NASA NTRS1991

Algorithmically Specialized Parallel Architecture For Robotics

Computing system called Robot Mathematics Processor (RMP) contains large number of processor elements (PE's) connected in various parallel and serial combinations reconfigurable via software. Special-purpose architecture designed for solving diverse computational problems in robot control, simulation, trajectory generation, workspace analysis, and like. System an MIMD-SIMD parallel architecture capable of exploiting parallelism in different forms and at several computational levels. Major advantage lies in design of cells, which provides flexibility and reconfigurability superior to previous SIMD processors.

Fijany, Amir↗
NASA NTRS1991

Redundant Robot Can Avoid Obstacles

Simple and direct control scheme enables redundant robot to avoid obstacles in workspace. In proposed scheme, called "configuration control", degrees of freedom used to configure robot to satisfy set of inequality constraints representing avoidance of obstacles, while simultaneously making end effector follow desired trajectory. Provides capability to avoid obstacles in dynamically varying environment where apriori planning of tasks not feasible.

Homayoun, Seraji↗
NASA NTRS1990

Intelligent Robotic Systems Study (IRSS), phase 2

Under the Intelligent Robotics System Study (IRSS) contract, a generalized robotic control architecture was developed for use with the ProtoFlight Manipulator Arm (PFMA). The controller built for the PFMA provides localized position based force control, teleoperation and advanced path recording and playback capabilities. Various hand controllers can be used with the system in conjunction with a synthetic time delay capability to provide a realistic test bed for typical satellite servicing tasks. The configuration of the IRSS system is illustrated and discussed. The PFMA has six computer controllable degrees of freedom (DOF) plus a seventh manually indexable DOF, making the manipulator a pseudo 7 DOF mechanism. Because the PFMA was not developed to operate in a gravity field, but rather in space, it is counter balanced at the shoulder, elbow and wrist and a spring counterbalance has been added near the wrist to provide additional support. Built with long slender intra-joint linkages, the PFMA has a workspace nearly 2 meters deep and possesses sufficient dexterity to perform numerous satellite servicing tasks. The manipulator is arranged in a shoulder-yaw, pitch, elbow-pitch, and wrist-pitch, yaw, roll configuration, with an indexable shoulder roll joint. Digital control of the PFMA is implemented using a variety of single board computers developed by Heurikon Corporation and other manufacturers. The IRSS controller is designed to be a multi-rate, multi-tasking system. Independent joint servos run at a 134 Hz rate and position based impedance control functions at 67 Hz. Autonomous path generation and hand controller inputs are processed at a 33 Hz.

Source record↗
NASA NTRS1990

Constrained trajectory optimization for kinematically redundant arms

Two velocity optimization schemes for resolving redundant joint configurations are compared. The Extended Moore-Penrose Technique minimizes the joint velocities and avoids obstacles indirectly by adjoining a cost gradient to the solution. A new method can incorporate inequality constraints directly to avoid obstacles and singularities in the workspace. A four-link arm example is used to illustrate singularity avoidance while tracking desired end-effector paths.

Carignan, Craig R.↗
NASA NTRS1990

FACE computer simulation

A computer simulation of the FACE (Flexible Arm Controls Experiment) was conducted to assess its design for use in the Space Shuttle. The FACE is supposed to be a 14-ft long articulate structure with 4 degrees of freedom, consisting of shoulder pitch and yaw, elbow pitch, and wrist pitch. Kinematics of the FACE was simulated to obtain data on arm operation, function, workspace and interaction. Payload capture ability was modeled. The simulation indicates the capability for detailed kinematic simulation and payload capture ability analysis, and the feasibility of real-time simulation was determined. In addition, the potential for interactive real-time training through integration of the simulation with various interface controllers was revealed. At this stage, the flexibility of the arm was not yet considered.

Sadeh, Willy Z.↗
NASA NTRS1991

Trajectory optimization for kinematically redundant arms

A review of local optimization methods for resolving joint configurations in underconstrained manipulation tasks is conducted. A new approach is developed for observing joint limits and avoiding obstacles during the trajectory planning. The methodology is used in a four-link arm example to avoid a workspace singularity and is compared with results using the extended Moore-Penrose technique. An alternative measure of arm 'manipulability' based directly on the rank of the Jacobian is also introduced.

Carignan, Craig R.↗
NASA NTRS1990

Task decomposition for multilimbed robots to work in the reachable-but-unorientable space

Multilimbed industrial robots that have at least one arm and two or more legs are suggested for enlarging robot workspace in industrial automation. To plan the motion of a multilimbed robot, the arm-leg motion-coordination problem is raised and task decomposition is proposed to solve the problem; that is, a given task described by the destination position and orientation of the end-effector is decomposed into subtasks for arm manipulation and for leg locomotion, respectively. The former is defined as the end-effector position and orientation with respect to the legged main body, and the latter as the main-body position and orientation in the world coordinates. Three approaches are proposed for the task decomposition. The approaches are further evaluated in terms of energy consumption, from which an optimal approach can be selected.

Su, Chao↗
NASA NTRS1990

Adaptive tracking for complex systems using reduced-order models

Reduced-order models are considered in the context of parameter adaptive controllers for tracking workspace trajectories. A dual-arm manipulation task is used to illustrate the methodology and provide simulation results. A parameter adaptive controller is designed to track a payload trajectory using a four-parameter model instead of the full-order, nine-parameter model. Several simulations with different payload-to-arm mass ratios are used to illustrate the capabilities of the reduced-order model in tracking the desired trajectory.

Carnigan, Craig R.↗
NASA NTRS1992

Integrated Scene And Graphics For Multiple-Camera Viewing

Multiple-video-camera viewing system for monitoring telerobot undergoing development. System presents user with variety of information on single video display: picture of robot from any of five movable cameras, graphical depiction of location and orientation of camera producing current picture in middle of video display, graphical depiction of locations and orientations of other cameras, and graphical images of fields of view of cameras and three-dimensional relationship to workspace of telerobot. Display helps user control telerobot quickly and efficiently.

Diner, Daniel B.↗
NASA NTRS1992

Magnetic Location Indicator

Ferrofluidic device indicates point of highest magnetic-flux density in workspace. Consists of bubble of ferrofluid in immiscible liquid carrier in clear plastic case. Used in flat block or tube. Axes of centering circle on flat-block version used to mark location of maximum flux density when bubble in circle. Device used to find point on wall corresponding to known point on opposite side of wall.

Stegman, Thomas W.↗
NASA NTRS1992

Hand/Eye Coordination For Fine Robotic Motion

Fine motions of robotic manipulator controlled with help of visual feedback by new method reducing position errors by order of magnitude. Robotic vision subsystem includes five cameras: three stationary ones providing wide-angle views of workspace and two mounted on wrist of auxiliary robot arm. Stereoscopic cameras on arm give close-up views of object and end effector. Cameras measure errors between commanded and actual positions and/or provide data for mapping between visual and manipulator-joint-angle coordinates.

Lokshin, Anatole M.↗
NASA NTRS1990

Planning and reasoning in the JPL telerobot testbed

The Telerobot Interactive Planning System is developed to serve as the highest autonomous-control level of the Telerobot Testbed. A recent prototype is described which integrates an operator interface for supervisory control, a task planner supporting disassembly and re-assembly operations, and a spatial planner for collision-free manipulator motion through the workspace. Each of these components is described in detail. Descriptions of the technical problem, approach, and lessons learned are included.

Peters, Stephen↗
NASA NTRS1991

Computational modelling of polymers

Polymeric materials and polymer/graphite composites show a very diverse range of material properties, many of which make them attractive candidates for a variety of high performance engineering applications. Their properties are ultimately determined largely by their chemical structure, and the conditions under which they are processed. It is the aim of computational chemistry to be able to simulate candidate polymers on a computer, and determine what their likely material properties will be. A number of commercially available software packages purport to predict the material properties of samples, given the chemical structures of their constituent molecules. One such system, Cerius, has been in use at LaRC. It is comprised of a number of modules, each of which performs a different kind of calculation on a molecule in the programs workspace. Particularly, interest is in evaluating the suitability of this program to aid in the study of microcrystalline polymeric materials. One of the first model systems examined was benzophenone. The results of this investigation are discussed.

Celarier, Edward A.↗