Discretized Voltage Control of a Linear Transformer Driver
Explore the source record for details and available documents.
42 ENGINEERING↗
SEARCH · Search NASA
Results for “Z TRANSFORM”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Impact of Pendant Amine Basicity on Electrochemically-Promoted Cobalt Hydride Formation: Kinetic and Mechanistic Analysis
Here, we report the role of pendant amine basicity on the proton-coupled electron transfer (PCET) reactivity for the conversion of [Co III Cp(P Ph 2 N R 2 )(CH 3 CN)] 2+ complexes to [HCo III Cp(P Ph 2 N R 2 )] + , which is a key transformation involved in catalytic CO 2 conversion to formate and in H 2 evolution. Three complexes were studied, where the amine substituent (R) varies from benzyl, methoxyphenyl, or phenyl. In previous work on the benzyl system, we showed that the amine on the P Ph 2 N Bn 2 ligand serves as a kinetically accessible protonation site and enables three participating hydride formation mechanisms. In this work, a combination of electrochemical measurements and theoretical calculations were used to show that the electronic donation at the pendant amine influences the accessible PCET mechanism and proton transfer kinetics related to cobalt hydride formation under analogous reaction conditions. Notably, the amine with the most electron-donating substituent correlates to the lowest barrier for amine protonation, and specific cobalt hydride formation mechanisms can be shut off for the amine with the least electron-donating substituent. The mechanistic and kinetic changes upon modulation of the amine substituent have great implications for overall catalytic efficiency and selectivity, especially to generate the cobalt hydride intermediate involved in selective CO 2 reduction to formate. This work shows how to exploit kinetic basicity using ligand-cooperative design to facilitate PCET reactions involved in energy related transformations.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Measurement bias in self-heating x-ray free electron laser experiments from diffraction studies of phase transformation in titanium
X-ray self-heating is a common by-product of X-ray Free Electron Laser (XFEL) techniques that can affect targets, optics, and other irradiated materials. Diagnosis of heating and induced changes in samples may be performed using the x-ray beam itself as a probe. However, the relationship between conditions created by and inferred from x-ray irradiation is unclear and may be highly dependent on the material system under consideration. Here, we report on a simple case study of a titanium foil irradiated, heated, and probed by a MHz XFEL pulse train at 18.1 keV delivered by the European XFEL using measured x-ray diffraction to determine temperature and finite element analysis to interpret the experimental data. We find a complex relationship between apparent temperatures and sample temperature distributions that must be accounted for to adequately interpret the data, including beam averaging effects, multivalued temperatures due to sample phase transitions, and jumps and gaps in the observable temperature near phase transformations. The results have implications for studies employing x-ray probing of systems with large temperature gradients, particularly where these gradients are produced by the beam itself. Finally, this study shows the potential complexity of studying nonlinear sample behavior, such as phase transformations, where biasing effects of temperature gradients can become paramount, precluding clear observation of true transformation conditions.
Crystallography↗
Signatures of van Hove singularities in the anisotropic in-plane optical conductivity of the topological semimetal Nb 3 SiTe 6
In this work, we present a temperature-dependent infrared spectroscopy study on the layered topological semimetal Nb 3 SiTe 6 combined with density-functional theory calculations of the electronic band structure and optical conductivity. Our results reveal an anisotropic behavior of the in-plane (ac-plane) optical conductivity, with three pronounced excitations located at around 0.15, 0.28, and 0.41 eV for the polarization of the incident radiation along the c axis. These excitations are well reproduced in the theoretical spectra. Based on the ab initio results, the excitations around 0.15 and 0.28 eV are interpreted as fingerprints of van Hove singularities in the electronic band structure and compared to the findings for other topological semimetals.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Energy-momentum tensor in the 2D Ising CFT in full modular space
A set of lattice operators for the energy-momentum (EM) tensor in the Ising CFT is derived in the spin variables. Our expression works under arbitrary affine transformation both on triangular and hexagonal lattices (where the former includes the rectangular lattices). The correctness of the operators is numerically confirmed in Monte Carlo calculations by comparing the results with the conformal Ward identity, including the operator normalization. In the derivation of the EM tensor, a staggered structure of the affine-transformed hexagonal lattice is analyzed, which shows a peculiar shift from the circumcenter dual lattice and appears as a mixing angle between the holomorphic part $T(z)$ and the antiholomorphic part $\tilde T(\bar z)$. The details of this contribution will appear in a subsequent paper.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Toward Revealing Microcystin Distribution in Mouse Liver Tissue Using MALDI-MS Imaging
Cyanotoxins can be found in water and air during cyanobacterial harmful algal blooms (cHABs) in lakes and rivers. Therefore, it is very important to monitor their potential uptake by animals and humans as well as their health effects and distribution in affected organs. Herein, the distribution of hepatotoxic peptide microcystin-LR (MC-LR) is investigated in liver tissues of mice gavaged with this most common MC congener. Preliminary matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) imaging experiments performed using a non-automated MALDI matrix deposition device and a MALDI-time-of-flight (TOF) mass spectrometer yielded ambiguous results in terms of MC-LR distribution in liver samples obtained from MC-LR-gavaged mice. The tissue preparation for MALDI-MS imaging was improved by using an automated sprayer for matrix deposition, and liver sections were imaged using an Nd:YAG MALDI laser coupled to a 15 Tesla Fourier-transform ion cyclotron resonance (FT-ICR)-mass spectrometer. MALDI-FT-ICR-MS imaging provided unambiguous detection of protonated MC-LR (calculated m/z 995.5560, z = +1) and the sodium adduct of MC-LR (m/z 1017.5380, z = +1) in liver sections from gavaged mice with great mass accuracy and ultra-high mass resolution. Since both covalently bound and free MC-LR can be found in liver of mice exposed to this toxin, the present results indicate that the distribution of free microcystins in tissue sections from affected organs, such as liver, can be monitored with high-resolution MALDI-MS imaging.
59 BASIC BIOLOGICAL SCIENCES↗
Contributions to Lignomics: Stochastic Generation of Oligomeric Lignin Structures for Interpretation of MALDI–FT‐ICR‐MS Results
The lack of standards to identify oligomeric molecules is a challenge for the analysis of complex organic mixtures. High-resolution mass spectrometry—specifically, Fourier-transform ion cyclotron resonance mass spectrometry (FT-ICR MS)—offers new opportunities for analysis of oligomers with the assignment of formulae (C x H y O z ) to detected peaks. However, matching a specific structure to a given formula remains a challenge due to the inability of FT-ICR MS to distinguish between isomers. Additional separation techniques and other analyses (e.g., NMR spectroscopy) coupled with comparison of results to those from pure compounds is one route for assignment of MS peaks. Unfortunately, this strategy may be impractical for complete analysis of complex, heterogeneous samples. In this study we use computational stochastic generation of lignin oligomers to generate a molecular library for supporting the assignment of potential candidate structures to compounds detected during FT-ICR MS analysis. Furthermore, this approach may also be feasible for other macromolecules beyond lignin.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Numerical fluid dynamics for FRG flow equations: Zero-dimensional QFTs as numerical test cases. II. Entropy production and irreversibility of RG flows
Herein we demonstrate that the reformulation of renormalization group (RG) flow equations as nonlinear heat equations has severe implications on the understanding of RG flows in general. We demonstrate by explicitly constructing an entropy function for a zero-dimensional Z 2 -symmetric model that the dissipative character of generic nonlinear diffusion equations is also hard-coded in the functional RG equation. This renders RG flows manifestly irreversible, revealing the semigroup property of RG transformations on the level of the flow equation itself. Additionally, we argue that the dissipative character of RG flows, its irreversibility and the entropy production during the RG flow may be linked to the existence of a so-called C– / A-function. In total, this introduces an asymmetry in the so-called RG time—in complete analogy to the thermodynamic arrow of time—and allows for an interpretation of infrared actions as equilibrium solutions of dissipative RG flows equations. The impossibility of resolving microphysics from macrophysics is evident in this framework. Furthermore, we directly link the irreversibility and the entropy production in RG flows to an explicit numerical entropy production, which is manifest in diffusive and non-linear partial differential equations (PDEs) and a standard mathematical tool for the analysis of PDEs. Using exactly solvable zero-dimensional Z 2 -symmetric models, we explicitly compute the (numerical) entropy production related to the total variation nonincreasing property of the PDE during RG flows toward the infrared limit. Finally, we discuss generalizations of our findings and relations to the C– / A-theorem as well as how our work may help to construct truncations of RG flow equations in the future, including numerically stable schemes for solving the corresponding PDEs.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Comparison of cracking behavior of nanocrystalline Cu film on substrates of different plastic deformation mechanisms
Nanocrystalline (NC) metallic thin films on metal substrates usually undergo substantial cracking at applied strains of a few percent due to strain concentration at the film/substrate interfaces. In this work, we show that the cracking of a nanocrystalline Cu film can be significantly inhibited by a NiTi substrate. NC Cu films are deposited on 304 stainless steel, Kapton and NiTi substrates, in which plastic deformation occurs via dislocation slip, molecule chain disentanglement and collective lattice shear, respectively. NC Cu film on NiTi substrate starts to show observable cracks at an applied strain of 24%, in contrast to 6% for that on steel and 15% for that on Kapton. Further, the crack density in the film on NiTi substrate is two to three orders lower than the counterparts. The discrepancy is suggested to attribute to the reduced local strain concentration enabled by the uniform lattice shear and high strain hardening of the NiTi substrate.
36 MATERIALS SCIENCE↗
β -delayed neutron spectroscopy of Co 70 , 72 ground-state and isomeric-state decays
Here, the β-decaying states of 70,72 Co were studied at the National Superconducting Cyclotron Laboratory using the VANDLE neutron time-of-flight array. The (6 - ,7 - )β-decaying state in 70 Co is near-spherical with a lifetime of 113 ± 7 ms, and the low-spin (1 + ,2 + )β-decaying state is postulated to be the prolate deformed ground state with a lifetime of 508 ± 7 ms. Both decay predominantly to the bound states of 70 Ni. For the first time neutron-emissions from neutron unbound states from both the (6 - ,7 - ) and (1 + ,2 + )β decays were measured. Even with the low statistics data, we were able to disentangle the neutron emission from both decays, which enabled a determination of β-decay strength above the neutron separation energy of 70 Ni. Neutron emission probabilities were measured to be 7.1 ± 1.5% and 9.4 ± 1.7%, respectively, for the (6 - ,7 - ) and (1 + ,2 + ) decays. The decay pattern of the 70 Co is driven by neutron f 5/2 to proton f 7/2 Gamow-Teller transformation. The observed population of neutron unbound states is attributed to the conversion of p 1/2 and p 3/2 neutrons to p 3/2 and p 1/2 protons excited across the Z = 28 closed shell.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Primitive quantum gates for dihedral gauge theories
We describe the simulation of dihedral gauge theories on digital quantum computers. The nonabelian discrete gauge group $D_N$-- the dihedral group -- serves as an approximation to $U(1)\times\mathbb{Z}_2$ lattice gauge theory. In order to carry out such a lattice simulation, we detail the construction of efficient quantum circuits to realize basic primitives including the nonabelian Fourier transform over $D_N$, the trace operation, and the group multiplication and inversion operations. For each case the required quantum resources scale linearly or as low-degree polynomials in $n=\log N$. We experimentally benchmark our gates on the Rigetti Aspen-9 quantum processor for the case of $D_4$. The fidelity of all $D_4$ gates was found to exceed $80\%$.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Illuminating Galaxy Evolution at Cosmic Noon with ISCEA: the Infrared Satellite for Cosmic Evolution Astrophysics
ISCEA (Infrared Satellite for Cosmic Evolution Astrophysics) is a small astrophysics mission whose Science Goal is to discover how galaxies evolved in the cosmic web of dark matter at cosmic noon. Its Science Objective is to determine the history of star formation and its quenching in galaxies as a function of local density and stellar mass when the Universe was 3-5 Gyrs old (1.2 10 Mpc in each of 50 protocluster (cluster and cosmic web) fields at 1.2 < z < 2.1. ISCEA measures the star formation quenching factor in those fields, and galaxy kinematics with a precision < 50 km/s to deduce the 3D spatial distribution in each field. ISCEA will transform our understanding of galaxy evolution at cosmic noon. ISCEA is a small satellite observatory with a 30cm equivalent diameter aperture telescope with a FoV of 0.32 deg^2, and a multi-object spectrograph with a digital micro-mirror device (DMD) as its programmable slit mask. ISCEA will obtain spectra of 1000 galaxies simultaneously at an effective resolving power of R=1000, with 2.8"x2.8" slits, over the NIR wavelength range of 1.1 to 2.0 microns, a regime not accessible from the ground without large gaps in coverage. ISCEA will achieve a pointing accuracy of <= 2" FWHM over 200s. ISCEA will be launched into a Low Earth Orbit, with a prime mission of 2.5 years. ISCEA's space-qualification of DMDs opens a new window for spectroscopy from space, enabling revolutionary advances in astrophysics.
79 ASTRONOMY AND ASTROPHYSICS↗
Grain size dependence of thermally induced oxidation in zirconium carbide
Here complementary analytical approaches were employed to probe the effect of grain size on thermally induced oxidation of zirconium carbide (ZrC) utilizing thermogravimetric analysis, differential scanning calorimetry, and Raman spectroscopy, as well as synchrotron-based and laboratory-based X-ray diffraction (XRD) experiments. The oxidation mechanism and phase behavior of nanocrystalline ZrC (grain size ~ 20 nm) were compared with that of the more documented microcrystalline ZrC (grain size ~ 1 µm). Synchrotron XRD at the Advanced Photon Source with a hydrothermal diamond anvil cell (HDAC) used as a sample chamber revealed that the onset of oxidation is at ~ 380 °C for microcrystalline ZrC which is in agreement with previous work. In contrast, the critical oxidation temperature was ~ 330 °C for nanocrystalline ZrC. Additional high-temperature synchrotron XRD experiments at the National Synchrotron Light Source II using a lamp furnace in combination with Raman analysis showed that tetragonal ZrO 2 forms as an initial oxidation product and transforms at higher temperatures to the monoclinic phase. Thermogravimetric analysis (TGA) coupled with differential scanning calorimetry (DSC) confirmed the X-ray results of a lower critical oxidation temperature for the nanocrystalline sample. The phase transformations in the oxide phase with associated critical temperatures were also evident in the thermodynamic data as exothermic heat events.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
High-pressure phase transformation of carbonate malachite Cu2(CO3)(OH)2 driven by [CuO6] regularization and [CO3] rotation
Explore the source record for details and available documents.
99 GENERAL AND MISCELLANEOUS↗
From Layered Antiferromagnet to 3D Ferromagnet: LiMnBi-to-MnBi Magneto-Structural Transformation
Here, the intermetallic compound LiMnBi was synthesized by the two-step solid-state reaction from the elements. The synthesis temperature of 850 K was selected based on in-situ high-temperature powder X-ray diffraction data. LiMnBi crystalizes in the layered-like PbClF structure type (a = 4.3131(7) Å, c = 7.096(1) Å at 100 K, P4/nmm space group, Z = 2). LiMnBi structure is built of the alternating [MnBi] and Li layers, as determined from single-crystal X-ray diffraction data. Magnetic properties measurements and solid-state 7 Li Nuclear Magnetic Resonance data collected for polycrystalline LiMnBi samples indicate the long-range antiferromagnetic ordering of Mn sublattice at ~340 K, with no superconductivity down to 5 K detected. LiMnBi is air- and water-sensitive. In aerobic conditions, Li can be extracted from LiMnBi structure to form Li 2 O/LiOH and MnBi (NiAs structure type, P6 3 /mmc). The obtained MnBi polymorph was previously reported to be one of the strongest rare-earth-free ferromagnets, yet its bulk synthesis in powder form is cumbersome. The proposed magneto-structural transformation from ternary LiMnBi to ferromagnetic MnBi involves condensation of the MnBi4 tetrahedra upon Li deintercalation and is exclusive to LiMnBi. In contrast, ferromagnetic MnBi cannot be obtained from either isostructural NaMnBi and KMnBi, or from the structurally related CaMn 2 Bi 2 . Such a distinctive transformation in the case of LiMnBi is presumed to be due to its fitting reactivity to yield MnBi and favorable interlayer distance between [MnBi] layers, while the interlayer distance in NaMnBi and KMnBi structural analogs is unfavorably long. The studies of delithiation from the layered-like LiMnBi under different chemical environments indicate that the yield of the MnBi depends on the type of solvent used and the kinetics of the reaction. A slow rate and mild reaction media lead to a high fraction of the MnBi product. The saturation magnetization of the “as-prepared” MnBi is ~50 % of the expected value of 81.3 emu/g. Overall, this study adds a missing member to the family of ternary pnictides and illustrates how soft-chemistry methods can be used to obtain “difficult-to-synthesize” compounds.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Exploring the High-Pressure Phases of Carbon through X-ray Diffraction of Dynamic Compression Experiments on Sandia’s Z Pulsed Power Facility
The carbon phase diagram is rich with polymorphs which possess very different physical and optical properties ideal for different scientific and engineering applications. An understanding of the dynamically driven phase transitions in carbon is particularly important for applications in inertial confinement fusion, as well as planetary and meteorite impact histories. Experiments on the Z Pulsed Power Facility at Sandia National Laboratories generate dynamically compressed high-pressure states of matter with exceptional uniformity, duration, and size that are ideal for investigations of fundamental material properties. X-ray diffraction (XRD) is an important material physics measurement because it enables direct observation of the strain and compression of the crystal lattice, and it enables the detection and identification of phase transitions. Several unique challenges of dynamic compression experiments on Z prevent using XRD systems typically utilized at other dynamic compression facilities, so novel XRD diagnostics have been designed and implemented. We performed experiments on Z to shock compress carbon (pyrolytic graphite) samples to pressures of 150–320 GPa. The Z-Beamlet Laser generated Mn-Heα (6.2 keV) X-rays to probe the shock-compressed carbon sample, and the new XRD diagnostics measured changes in the diffraction pattern as the carbon transformed into its high-pressure phases. Quantitative analysis of the dynamic XRD patterns in combination with continuum velocimetry information constrained the stability fields and melting of high-pressure carbon polymorphs.
36 MATERIALS SCIENCE↗