Search NASA⌕ Search

SEARCH · Search NASA

Results for “ZIRCON”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

U-Pb geochronology of zircons form lunar Breccia 73217 using a sensitive high mass-resolution ion microprobe

U-Pb age determinations on four lunar zircons from existing thin-sections of one highland breccia, 73217, using the recently constructed ion microprobe SHRIMP, are reported. The analytical reproducibility of SHRIMP is demonstrated, and procedures for measuring Pb/U, Th/U, and corecting for initial Pb are explained. Electron microprobe analyses for the zircons are alsoar reported. The results show that the four zircons survived the lunar cataclysm without any identifiable effects on their U-Pb systematics. All four indicate a single age of 4356 +23 or -14 m.y. The zircons have experienced small variable amounts of Pb loss since crystallization, from almost zero up to about 10 percent. If this occurred during one later event, then age of the latter is between 1100 and 2300 m.y.

Compston, W.↗

Chronology of early Archaean granite-greenstone evolution in the Barberton Mountain Land, South Africa, based on precise dating by single zircon evaporation

Precise Pb-207/Pb-206 single zircon evaporating ages are reported for low-grade felsic metavolcanic rocks within the Onverwacht and Fig Tree Groups of the Barberton Greenstone Belt (BGB), South Africa, as well as for granitoid plutons bordering the belt. Dacitic tuffs of the Hooggenoeg Formation in the upper part of the Onverwacht Group are shown to yield ages between 3445 + or - 3 and 3416 + or - 5 Ma and to contain older crustal components represented by a 3504 + or - 4 Ma old zircon xenocryst. Fig Tree dacitic tuffs and agglomerates have euhedral zircons between 3259 + or - 3 Ma in age which are interpreted to reflect the time of crystallization. The comagmatic relationships between greenstone felsic volcanic units and the surrounding plutonic suites are keynoted. The data adduced show that the Onverwacht and Fig Tree felsic units have distinctly different ages and thus do not constitute a single, tectonically repeated unit as proposed by others. It is argued that conventional multigrain zircon dating may not accurately identify the time of felsic volcanic activity in ancient greenstones, and that the BGB in the Kaapval craton of southern Africa and greenstones in the Pilbara Block of Western Australia may have been part of a larger crustal unit in early Archaean times.

Kruener, Alfred↗

Isotopic Composition of Oxygen in Lunar Zircons

The recent discovery of heavy oxygen in zircons from the Jack Hills conglomerates Wilde et al. and Mojzsis et al. was interpreted as an indication of presence of liquid water on the surface of Early Earth. The distribution of ages of Jack Hills zircons and lunar zircons appears to be very similar and therefore analysis of oxygen in the lunar grains may provide a reference frame for further study of the early history of the Earth as well as give additional information regarding processes that operated on the Moon. In the present study we have analysed the oxygen isotopic composition of zircon grains from three lunar samples using the Swedish Museum of Natural History CAMECA 1270 ion microprobe. The samples were selected as likely tests for variations in lunar oxygen isotopic composition. Additional information is included in the original extended abstract.

Nemchin, A. A.↗

A Zircon U-Pb Study of the Evolution of Lunar KREEP

SIMS U-Pb analyses show that zircons from breccias from Apollo 14 and Apollo 17 have essentially identical age distributions in the range 4350 to 4200 Ma but, whereas Apollo 14 zircons additionally show ages from 4200 to 3900 Ma, the Apollo 17 samples have no zircons with ages <4200 Ma. The zircon results also show an uneven distribution with distinct peaks of magmatic activity. In explaining these observations we propose that periodic episodes of KREEP magmatism were generated from a primary reservoir of KREEP magma, which contracted over time towards the centre of Procellarum KREEP terrane.

Meyer, Charles↗

Oxygen Isotopic Signature of 4.4-3.9 Ga Zircons as a Monitor of Differentiation Processes on the Moon

We report oxygen isotopic compositions for 14 zircon grains from a sample of sawdust from lunar breccia 14321. The zircons range in age from approx.4.4 to 3.9 Ga and in U and Th content from a few to several hundred ppm. As such these grains represent a range of possible source rocks, from granophyric to mafic composition, and cover the total age range of the major initial lunar bombardment. Nevertheless, results show that the oxygen isotopic compositions of the zircons fall within a narrow range of (delta18)O of about 1 per mil and have (delta18)O values indistinguishable from those observed for terrestrial mid-ocean ridge basalts confirming the coincidence of lunar and Earth oxygen isotopic compositions. In the (delta17)O vs. (delta18)O, coordinates data form a tight group with a limited trend on the terrestrial fractionation line. The zircon oxygen isotopes show minimal evidence of the extreme and variable mineral differentiation and element fractionation that have contributed to the formation of their parent rocks.

Nemchin, A. A.↗

Melt Inclusions in Zircon: A Window to Understanding the Structure and Evolution of the Magmatic System Beneath the Laguna del Maule Volcanic Field

Explosive silicic eruptions pose a significant threat to society, yet the development and destabilization of the underlying silicic magmatic systems are still controversial. Zircons provide simultaneous information on the trace element composition and age of silicic magmatic systems, while melt inclusions in quartz and plagioclase yield important constraints on their volatile content as well as storage depth. Melt inclusions in zircons (MIZs) combine these data from a single mineral grain, recording the age, storage depth, temperature, and composition of magmas, and thus provide unique constraints on the structure and evolution of silicic magmatic systems. We studied MIZs from the Laguna del Maule (LdM) volcanic field in the southern Andes that is among the most active Pleistocene-Holocene rhyolitic volcanic centers worldwide and a potentially hazardous system displaying inflation rates in excess of 25 cm/yr. The host zircon ages suggest that the LdM MIZ record extends to ~30 kyr before eruption, in contrast to the melt inclusions in LdM plagioclase and quartz crystals that formed only decades to centuries before eruption. The major element compositions of MIZs are minimally affected by post-entrapment crystallization, and agree well with the LdM rhyolitic whole rock data. The more evolved major element composition of rle MIZs than rdm MIZs, suggests a long-term deeper connection of the rdm crystal mush to a more primitive magma body than that of the rle. The evidence of slow H diffusion observed in MIZs suggest that their H 2 O contents are not significantly affected by diffusion of H through the host zircon. The storage depths of 1.1 to 2.8 kbars recorded by the H 2 O contents of rdm and rle MIZs are consistent with the optimal emplacement window (2.0 ± 0.5 kbar) of silicic magma reservoir growth, storage, and eruptibility based on thermomechanical modeling (Huber et al. 2019).

Kei Shimizu↗

Alkaline zirconates as effective materials for hydrogen production through consecutive carbon dioxide capture and conversion in methane dry reforming

In this work, H 2 production was evaluated using different carbonation conditions and two alkaline zirconates. For this purpose, Li 2 ZrO 3 and Na 2 ZrO 3 were synthesized, characterized and tested on a consecutive process composed of initial CO 2 capture, followed by methane dry reforming (MDR). Thermogravimetric results showed that under the four gas mixtures tested (diluted and saturated CO 2 , CO and CO-O 2 ), both ceramics are able to chemisorb CO 2 , with Na2ZrO3 having the highest capture with saturated CO 2 . In catalytic tests, ceramics carbonated with saturated CO 2 or CO-O 2 gas flows were able to act as sorbents and catalysts, producing H 2 at T > 750 °C through the partial oxidation of methane. This reaction was produced because CO2 desorption did not occur, thus avoiding the MDR process. On the other hand, carbonated ceramics under a CO-O2 gas mixture presented an outstanding catalytic performance. Between 450 and 750 °C, H 2 was formed through the MDR process promoted by CO 2 desorption from both ceramics. This result is in line with CO 2 desorption results, where a weaker CO 2 –solid interaction was observed in comparison with saturated CO 2 2. Afterward, both ceramics presented a similar catalytic behavior, good regeneration and cyclability after the double process proposed (CO 2 capture-MDR reaction). Lithium zirconate also presented high thermal stability during cycle tests; meanwhile, sodium zirconate showed an important H 2 production increase as a function of cycles. Finally, both materials are feasible options for producing a clean energy source in a moderate temperature range through the catalytic conversion of two greenhouse gases (CO 2 and CH 4 ).

03 NATURAL GAS↗

Anisotropic mechanical properties of zircon and the effect of radiation damage

Our study provides new insights into the relationship between radiation-dose-dependent structural damage, due to natural U and Th impurities, and the anisotropic mechanical properties (Poisson s ratio, elastic modulus and hardness) of zircon. Natural zircon samples from Sri Lanka (see Muarakami et al. 1991) and synthetic samples, covering a dose range of zero up to 6.8 x 10 18 -decays/g, have been studied by nanoindentation. Measurements along the [100] crystallographic direction and calculations, based on elastic stiffness constants determined by zkan (1976), revealed a general radiation-induced decrease in stiffness (~ 54 %) and hardness (~ 48 %) and an increase of the Poisson s ratio (~ 54 %) with increasing dose. Additional indentations on selected samples along the [001] allowed one to follow the amorphization process to the point that the mechanical properties are isotropic. This work shows that the radiation-dose-dependent changes of the mechanical properties of zircon can be directly correlated with the amorphous fraction as determined by previous investigations with local and global probes (Rios et al. 2000a; Farnan and Salje 2001; Zhang and Salje 2001). This agreement, revealed by the different methods, indicates a huge influence of structural and even local phenomena on the macroscopic mechanical properties.

36 MATERIALS SCIENCE↗

Monophasic zircon-type tetragonal Eu{sub 1−x}Bi{sub x}VO{sub 4} solid-solution: synthesis, characterization, and optical properties

Highlights: • Complete Eu{sub 1−x}Bi{sub x}VO{sub 4} with zircon-type structure was successfully synthesized. • The band gap of the samples could be adjusted and controlled by bismuth content. • Eu{sub 1−x}Bi{sub x}VO{sub 4} show strong red emission under both near UV and visible-light excitation. - Abstract: By combining the methods of co-precipitation and hydrothermal synthesis methods, the complete solid-solution of Eu{sub 1−x}Bi{sub x}VO{sub 4} with monophasic zircon-type structure was successfully synthesized. The zircon-type structure was determined by X-ray diffractometer and Raman scattering, and the optical properties were characterized by ultraviolet-visible diffuse reflectance and photoluminescence spectrophotometer. The results indicate that the band gap of Eu{sub 1−x}Bi{sub x}VO{sub 4} could be adjusted and controlled by bismuth content in the range of x = 0–0.9. Meanwhile, the Eu{sub 1−x}Bi{sub x}VO{sub 4} solid-solution phosphors show strong red light emission was shown in 619 nm under both near UV-light and visible-light excitation. Notably, the emission intensity of Eu{sub 1−x}Bi{sub x}VO{sub 4} (x = 0.4) is the strongest in all samples.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis of doped lanthanum zirconate nanomaterials and the effect of V–Ge substitution on their structural, electrical and dielectric properties

Graphical abstract: Variation of dielectric constant with frequency for all the synthesized materials. - Highlights: • Hydrothermal method has been successfully employed to synthesize the zirconates. • XRD confirmed the formation of required phase. • Increased electrical resistivity makes these materials useful for microwave devices. • Dielectric parameters of zirconates decrease with increasing frequency. • Dielectric constant decreases with increasing substituents concentration. - Abstract: A hydrothermal method was successfully employed for the synthesis of a series of vanadium and germanium co-doped pyrochlore lanthanum zirconates with composition La{sub 2−x}V{sub x}Zr{sub 2−y}Ge{sub y}O{sub 7} (where x, y = 0.0, 0.25, 0.50, 0.75 and 1.0). The XRD and FTIR analyses confirmed the formation of single phase except vanadium and germanium substituted samples and the crystallite sizes are in the range of 7–31 nm for V{sup 3+}–Ge{sup 4+} substituted samples. The theoretical compositions are confirmed by the ED-XRF studies. The room temperature electrical resistivity increase with the substituents concentration which suggests that the synthesized materials can be used for microwave devices as such devices required highly resistive materials. Dielectric properties were measured in the frequency range of 6 kHz to 1 MHz. The dielectric parameters decrease with increase in frequency. The DC resistivity data is in good agreement with the dielectric data.

36 MATERIALS SCIENCE↗

Atomistic Simulation of Track Formation by Energetic Recoils in Zircon

We have performed classical molecular dynamics simulations of fission track formation in zircon. We simulated the passage of a swift heavy ion through crystalline zircon using cylindrical thermal spikes with energy deposition (dE/dx) of 2.5 to 12.8 keV/nm and radius of 3 nm. At a low dE/dx of 2.55 keV/nm, the structural damage recovered almost completely and a damage track was not produced. At higher values of dE/dx, tracks were observed and the radius of the track increased with increasing dE/dx. Our structural analysis shows amorphization in the core of the track and phase separation into Si-rich regions near the center of the track and Zr-rich regions near the periphery. These simulations establish a threshold dE/dx for fission-track formation in zircon that is relevant to thermo-chronology and nuclear waste immobilization.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A Diversity of Temperature and Pressure Conditions Recorded by Zircon within Suevite from Ries Crater, Germany

The temperature and pressure conditions experienced by rocks during an impact event can be constrained using petrologic and microstructural analysis and is crucial to providing ground truth to the impact cratering process. Suevite is a polymict, impact melt-bearing breccia, specific to Ries crater in Germany. There are competing models for suevite formation and emplacement, such as clastic flows pushed out of the crater rim or ejecta plume fallback. Knowledge of the temperature and pressure pathways recorded by grains within the suevite can help distinguish between these and other models. The accessory phase zircon (ZrSiO4) and its high-pressure polymorph reidite are particularly useful in such circumstances as they are highly refractory minerals that can record the high-temperature and/or high-pressure conditions of an impact event. Here we present evidence for a wide array of temperature and pressure conditions recorded in zircon grains within a single thin section of suevite. Zircons in this study range from unshocked to highly shocked (>53 GPa), and record temperatures more than 1673 °C. These findings confirm previous studies concluding that suevites contain material exposed to very diverse pressure and temperature conditions during initial shock compression and excavation but do not, as a whole, experience extreme temperatures (>1673 °C) or pressures (>30 GPa).

mineralogy↗

Proton conductivity of potassium doped barium zirconates

Potassium doped barium zirconates have been synthesized by solid state reactions. It was found that the solubility limit of potassium on A-sites is between 5% and 10%. Introducing extra potassium leads to the formation of second phase or YSZ impurities. The water uptake of barium zirconates was increased even with 5% doping of potassium at the A-site. The sintering conditions and conductivity can be improved significantly by adding 1 wt% ZnO during material synthesis. The maximum solubility for yttrium at B-sites is around 15 at% after introducing 1 wt% zinc. The conductivity of Ba{sub 0.95}K{sub 0.05}Zr{sub 0.85}Y{sub 0.11}Zn{sub 0.04}O{sub 3-{delta}} at 600 deg. C is 2.2x10{sup -3} S/cm in wet 5% H{sub 2}. The activation energies for bulk and grain boundary are 0.29(2), 0.79(2) eV in wet 5% H{sub 2} and 0.31(1), 0.74(3) eV in dry 5% H{sub 2}. A power density of 7.7 mW/cm{sup 2} at 718 deg. C was observed when a 1 mm thick Ba{sub 0.95}K{sub 0.05}Zr{sub 0.85}Y{sub 0.11}Zn{sub 0.04}O{sub 3-{delta}} pellet was used as electrolyte and platinum electrodes. - Graphical abstract: Potassium doped barium zirconates have been synthesized by solid state reactions. It was found that the solubility limit of potassium on A-sites is between 5% and 10 %. The sintering conditions and conductivity can be improved significantly by adding 1 wt% ZnO during material synthesis. Five percent doping of potassium at A-site can double the total conductivity.

36 MATERIALS SCIENCE↗

Atomistic simulation of track formation by energetic ions in zircon

We have performed classical molecular dynamics simulations of fission track formation in zircon. We simulated the passage of a swift heavy ion through crystalline zircon using cylindrical thermal spikes with energy deposition (dE/dx) of 2.5-12.8 keV nm{sup -1} and a radius of 3 nm. At a low dE/dx of 2.55 keV nm{sup -1}, the structural damage recovered almost completely and a damage track was not produced. At higher values of dE/dx, tracks were observed and the radius of the track increased with increasing dE/dx. Our structural analysis shows amorphization in the core of the track and phase separation into Si-rich regions near the center of the track and Zr-rich regions near the periphery. These simulations establish a threshold dE/dx for fission track formation in zircon that is relevant to thermochronology and nuclear waste immobilization.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Oxygen Affinity: The Missing Link Enabling Prediction of Proton Conductivities in Doped Barium Zirconates

Proton-conducting oxides, specifically doped barium zirconates, have garnered much attention as electrolytes for solid-state electrochemical devices operable at intermediate temperatures (400–600 °C). In chemical terms, hydration energy, E hyd , and proton–dopant association energy, E as , are two key parameters that determine whether an oxide exhibits fast proton conduction, but to date ab initio studies have for the most part studied each parameter separately, with no clear correlation with proton conductivity identified in either case. Here, we demonstrate that the oxygen affinity, E O.dopant , defined as the energy released when an oxide ion enters an oxygen vacancy close to a dopant atom, is the missing link between these two parameters and correlates well with experimental proton conductivities in doped barium zirconates. Ab initio calculations of point defects and their complexes in Sc-, In-, Lu-, Er-, Y-, Gd-, and Eu-doped barium zirconates are used to determine E hyd , E as , E O.dopant , and the hydrogen affinity, E H.host , of each system. These four energy terms are related by E hyd = E O.dopant + 2E H.host + 2E as . Complementary impedance spectroscopy measurements reveal that the stronger the calculated oxygen affinity of a system, the higher the proton conductivity at 350 °C. Although the proton trapping site is also an important factor, the results show that oxygen affinity is an excellent predictor of proton conductivity in these materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Novel Structural Motif To Promote Mg-Ion Mobility: Investigating ABO 4 Zircons as Magnesium Intercalation Cathodes

There is an increasing need for sustainable energy storage solutions as fossil fuels are replaced by renewable energy sources. Multivalent batteries, specifically Mg batteries, are one energy storage technology that researchers continue to develop with hopes to surpass the performance of Li-ion batteries. However, the limited energy density and transport properties of Mg cathodes remain critical challenges preventing the realization of high-performance multivalent batteries. In this work, ABO 4 zircon materials (A = Y, Eu and B = V, Cr) are computationally and experimentally evaluated as Mg intercalation cathodes. Remarkably good Mg-ion transport properties were predicted and Mg-ion intercalation was experimentally verified in sol-gel synthesized zircon YVO 4 , EuVO 4 , and EuCrO 4 . Among them, EuVO 4 exhibited the best electrochemical performance and demonstrated repeated reversible cycling. While we believe that the one-dimensional diffusion channels and redox-active species tetragonal coordination limit the value of many zircons as high-performance cathodes, their unique structural motif of overlapping polyhedra along the diffusion pathway appears instrumental for promoting good Mg-ion mobility. The motif results in a favorable "6-5-4" change in coordination that avoids unfavorable sites with lower coordination along the diffusion pathway and a structural design metric for future Mg cathode development.

25 ENERGY STORAGE↗

Regeneration mechanisms of high-lithium content zirconates as CO 2 capture sorbents: experimental measurements and theoretical investigations

By combining TGA and XRD measurements with theoretical calculations of the capture of CO 2 by lithium-rich zirconates (Li 8 ZrO 6 and Li 6 Zr 2 O 7 ), it has been demonstrated that the primary regeneration product during absorption/desorption cycling is in the form of Li 2 ZrO 3 . During absorption/desorption cycles, lithium-rich zirconates will be consumed and will not be regenerated. Here, this result indicates that among known lithium zirconates, Li 2 ZrO 3 is the best sorbent for CO 2 capture.

36 MATERIALS SCIENCE↗

Zircon Lu-Hf systematics: Evidence for the episodic development of Archaean greenstone belts

A combined U-Th-Pb and Lu-Hf isotopic study of zircons was undertaken in order to determine the provenance and age of an Archean granite-greenstone terrain and to test the detailed application of the Lu-Hf system in various Archean zircons. The eastern Wawa subprovince of the Superior province consists of the low grade Michipicoten and Gamitagama greenstone belts and the granitic terrain. The Hf isotopic data indicate that the typical lithological features of a greenstone belt cycle could be accommodated in a crustal growth model that involved decreasing depth of melting in three isotopically distinct reservoirs: mantle, lower crust and upper crust. The model age of the sources given by the intersection of the lower crustal curve with the bulk earth evolution curve is about 2900 My, in good agreement with the zircon U-Pb basement age. This linear array also has a similar intersection age to that of Proterozoic carbonatite complexes. The general convergence of the other reservoir vectors around this age suggests that mantle depletion, crustal extraction and intracrustal differentiation were all part of the same episodic event. It is also apparent that recycling of older basement was important in the formation of many of the later greenstone belt rocks.

Smith, P. E.↗