Search NASA⌕ Search

SEARCH · Search NASA

Results for “Zn(OF)2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Meteoritic material in lunar highland samples from the Apollo 11 and 12 sites

Radiochemical neutron activation analyses for Ag, Au, Bi, Br, Cd, Cs, Ge, In, Ir, Ni, Os, Pd, Rb, Re, Sb, Te, Tl, U and Zn were carried out on 11 samples from the Apollo 11 and 12 sites (two samples of rock 12013, one granitic and one KREEPy; 4 KREEP fragments from 2-4 mm soil 12033,2; 4 anorthositic fragments from 1-3 mm soil 10085,104; 1 sample of 'Luny' rock-felsite-KREEP breccia 12013 10085,31 LR-1). Most Apollo 12 samples were found to have an Imbrium meteoritic component; others, typified by the Luny breccia, apparently contain a new meteoritic component of low Re content. Components of higher Ir/Au ratio (3L, 5L and 7) were found in Apollo 11 anorthositic samples; the fact that their enrichment in meteoritic siderophiles parallels that of Fe, Mg, REE and other KREEP elements is consistent with progressive contamination of an anorthositic crust. The Luny rock was tentatively classified Group 2, supporting the assignment of this group to Serenitatis.

Janssens, M.-J.↗
NASA NTRS1999

Thermally Mobile Trace Elements in Carbonaceous Chondrites from Cold and Hot Deserts

Some decades ago, Anders and co-workers used RNAA to classify a number of trace elements as being volatile during nebular condensation and accretion into primitive objects based upon their strong depletion in (equilibrated) ordinary chondrites relative to C1 chondrites. Such elements, e.g. Ag, Bi, Cd, Cs, In, Se, Te, Tl, Zn and others, exhibit nearly constant, C1-normalized atomic abundances in C2 (CM2) and in C3 chondrites. They interpreted the near-constancy of these abundances according to a 2-component model in which volatiles were introduced into carbonaceous (and other) chondrites as Cl material which was diluted with differing proportions of high-temperature (i.e. volatile-free) components. In this view, mean volatile element abundances of 0.48 in C2 and 0.24-0.29 x C1 in C3 chondrites indicated that C2 and C3 chondrites are, respectively, about 1:1 and 1:2-3 mixtures of Cl-like and high temperature materials. More recently, C1 normalized abundances of such volatile elements are nearly constant in most C2-6 chondrites (i.e. 25 non-Antarctic meteorites, nearly all falls, and 36 Antarctic finds) consistent with a 2- component mixing model. However, rather than being quantized, mean volatile element contents in each chondrite define a continuum from 0.92-0.14 x Cl for these 61 chondrites. A few carbonaceous chondrites - the first having been the NIPR consortium samples B-7904, Y-82162 and Y-86720 - show an altered pattern: many of the volatile elements in each exhibit the usual constancy of C1-normalized atomic abundances, but modified by further depletion of Cd and other elements like Tl and Bi. These are the most mobile trace elements, i.e. those most readily vaporized and lost from primitive meteorites during week-long heating at greater than or equal to 400 C under low ambient pressures (initially 10 (exp -5) atm H2), simulating metamorphic conditions in a primitive parent body. Similarities between mobile element data for B-7904, Y-82162 and Y-86720 with those for Murchison heated at 500-700 C suggest that these Antarctic C1 and C2-like chondrites were metamorphosed at temperatures like these in the interiors of their parent bodies. Metamorphic temperatures inferred from RNAA data and textural/mineralogic alterations are internally consistent, agreeing with those evident in heated Murchison samples. These 3 chondrites were also heated late in their histories since all have lost cosmogenic 3-He, presumably during close solar approach, and B-7904 and Y-86720 seem also to have lost substantial proportions of radiogenic He-4 and Ar-40, cf. data. Similarities in spectral reflectance data for C-, G-, B- and F- asteroids, for these meteorites and for heated Murchison samples suggest that thermally metamorphosed interior materials in these asteroids were excavated by impacts and re-deposited on them, forming their present surfaces. Establishment of the thermal metamorphic histories of carbonaceouis chondrites, then, is essential to establishing the evolution and present-day nature of C-type and related asteroids.

Lipschutz, M. E.↗
NASA NTRS2000

Thermally Mobile Trace Elements in Carbonaceous Chondrites From Cold and Hot Deserts

Some decades ago, Anders and co-workers used RNAA to classify a number of trace elements as being volatile during nebular condensation and accretion into primitive objects based upon their strong depletion in (equilibrated) ordinary chondrites relative to C1 chondrites. Such elements, e.g. Ag, Bi, Cd, Cs, In, Se, Te, Tl, Zn and others, exhibit nearly constant, C1-normalized atomic abundances in C2 (CM2) and in C3 chondrites. They interpreted the near-constancy of these abundances according to a 2-component model in which volatiles were introduced into carbonaceous (and other) chondrites as C1 material which was diluted with differing proportions of high-temperature (i.e. volatile-free) components. In this view, mean volatile element abundances of 0.48 in C2 and 0.24-0.29 x C1 in C3 chondrites indicated that C2 and C3 chondrites are, respectively, about 1:1 and 1:2-3 mixtures of C1-like and high temperature materials. More recently, Xiao and Lipschutz found that C-normalized abundances of such volatile elements are nearly constant in most C2-6 chondrites (i.e. 25 non-Antarctic meteorites, nearly all falls, and 36 Antarctic finds) consistent with a 2-component mixing model. However, rather than being quantized, mean volatile element contents in each chondrite define a continuum from 0.92-0.14 x C1 for these 61 chondrites. A few carbonaceous chondrites, the first having been the NIPR consortium samples B-7904, Y-82162 and Y-86720, show an altered pattern: many of the volatile elements in each exhibit the usual constancy of C1-normalized atomic abundances, but modified by further depletion of Cd and other elements like Tl and Bi. These are the most mobile trace elements, i.e. those most readily vaporized and lost from primitive meteorites during week-long heating at greater than or equal to 400 C under low ambient pressures (initially 10(exp -5) atm H2), simulating metamorphic conditions in a primitive parent body. Similarities between mobile element data for B-7904, Y-82162 and Y-86720 with those for Murchison heated at 500-700 C, suggest that these Antarctic C1 - and C2-like chondrites were metamorphosed at temperatures like these in the interiors of their parent bodies. Metamorphic temperatures inferred from RNAA data and textural/mineralogic alterations are internally consistent, agreeing., with those evident in heated Murchison samples. These 3 chondrites were also heated late in their histories since all have lost cosmogenic He-3, presumably during close solar approach, and B-7904 and Y-86720 seem also to have lost substantial proportions of radiogenic He-4 and Ar-40 cf. data in. Similarities in spectral reflectance data for C-, G-, B- and F- asteroids, for these meteorites and for heated Murchison samples suggest that thermally metamorphosed interior materials in these asteroids were excavated by impacts and re-deposited on them, forming their present surfaces. Establishment of the thermal metamorphic histories of carbonaceous chondrites, then, is essential to establishing the evolution and present-day nature of C-type and related asteroids.

Lipschutz, M. E.↗
NASA NTRS1991

Absolute cascade-free cross-sections for the 2S to 2P transition in Zn(+) using electron-energy-loss and merged-beams methods

Absolute cascade-free excitation cross-sections in an ion have been measured for the resonance 2S to 2P transition in Zn(+) using electron-energy-loss and merged electron-ion beams methods. Measurements were carried out at electron energies of below threshold to 6 times threshold. Comparisons are made with 2-, 5-, and 15-state close-coupling and distorted-wave theories. There is good agreement between experiment and the 15-state close-coupling cross-sections over the energy range of the calculations.

Smith, Steven J.↗
NASA NTRS1991

Creep behaviour of Cu-30 percent Zn at intermediate temperatures

The present, intermediate-temperature (573-823 K) range investigation of creep properties for single-phase Cu-30 percent Zn alpha-brass observed inverse, linear, and sigmoidal primary-creep transients above 573 K under stresses that yield minimum creep rates in the 10 to the -7th to 2 x 10 to the -4th range; normal primary creep occurred in all other conditions. In conjunction with a review of the pertinent literature, a detailed analysis of these data suggests that no clearly defined, classes M-to-A-to-M transition exists in this alloy notwithstanding the presence of both classes' characteristics under nominally similar stresses and temperatures.

Raj, S. V.↗
NASA NTRS2016

Igneous and Sedimentary Compositions from Four Landing Sites on Mars from the Alpha Particle X-Ray Spectrometer (APXS)

The APXS - supported and promoted strongly by Heinrich Waenke - on all four Mars Rovers has returned compositional data from about 1000 rocks and soil targets along the combined traverses of over 60 kilometers. Providing precise and accurate bulk chemistry with typically 16 quantified elements, the APXS is a powerful and versatile tool that when combined with the ability to traverse to key rocks and soils has provided critical information needed to understand the geologic evolution of Mars. APXS data allow comparisons among landing sites, provide ground truth for orbiters and connections back to SNC meteorites. The soils and dust are basaltic in character and represent the average Mars composition similar to Adirondack basalts from Gusev crater but with unambiguous elevated and correlated S, Cl and Zn contents. At all four landing sites the APXS found several rocks with a felsic composition. The similarity is best assessed in a logarithmic ratio plot of rock normalized to the average soil composition (Fig.1). High alkaline, Al, and low Mg, Fe, low S, Cl and Ni, Zn as well as an Fe/Mn ratio of approximately 50 indicate a likely unaltered and igneous origin. Sediments, e.g. the Burns formation, with approximately 25 wt% SO3 at Meridiani Planum have been documented over 10s of kilometers (Fig. 2). This formation is compositionally homogeneous, but showing the removal of MgSO4 and a threefold increase in Cl downhill in 2 craters. The degraded rim of the Noachian crater Endeavour resembles average Mars crust, with local Ca, Mg and Fe sulfate alteration and elevated Mn, some felsic rocks, and high Al, Si and low Fe rocks, possibly indicating clays. Unusual soils at Gusev crater in the area surrounding Home Plate include some very rich in ferric sulfate salts (up to 35 wt% SO3) and some with 90% wt% SiO2, possibly indicating fumerolic activities. Rocks in the Columbia Hills show significant signs of alteration including elevated S, Cl and Br in the abraded interior. At Gale Crater, mudstones with approximately 20% clay, less than 1% SO3 and overall average Mars composition indicate a former habitable environment with low acidity. A remarkable diversity of compositions was found during Curiosity's traverses, which likely stems from material influx from the northern Gale rim. At Pahrump, the base of Mount Sharp, a homogeneous mudstone with lower Mg and Ca was encountered. The composition of this Murray unit can be traced over several kilometers with smooth trends of higher Fe/Mn and lower soluble trace elements Ni and Zn at higher elevation. The likely aeolian Stimson formation with average Mars crustal composition intersects in several places in sharp contact with the Murray formation. Both units show local alteration halos with highly elevated SiO2 of up to 75%, usually correlated with increase in Ti and often P.

Gellert, R.↗
NASA NTRS2012

Volatile Siderophile Elements in Shergottites: Constraints on Core Formation and Magmatic Degassing

Volatile siderophile elements (e.g., As, Sb, Ge, Ga, In, Bi, Zn, Cd, Sn, Cu, Pb) can place constraints both on early differentiation as well as the origin of volatiles. This large group of elements has been used to constrain Earth accretion [1,2], and Earth-Moon geochemistry [3]. Application to Earth has been fostered by new experimental studies of these elements such as Ge, In, and Ga [4,5,6]. Application to Mars has been limited by the lack of data for many of these elements on martian meteorites. Many volatile elements are considered in the pioneering work by [7] but for only the small number of martian samples then available. We have made new measurements on a variety of martian meteorites in order to obtain more substantial datasets for these elements using the analytical approach of [8]. We use the new dataset, together with published data from the literature, to define martian mantle abundances of volatile siderophile elements. Then, we evaluate the possibility that these abundances could have been set by mid-mantle (14 GPa, 2100 C) metal-silicate equilibrium, as suggested by the moderately and slightly siderophile elements [9]. Finally, we examine the possibility that some elements were affected by volatility and magmatic degassing.

Righter, Kevin↗
NASA NTRS1978

Chemistry and petrology of size fractions of Apollo 17 deep drill core 70009-70006

Instrumental neutron activation analysis was used to examine 34 major, minor and trace elements in 48 bulk soils and size fractions (90-1000 microns, 20-90 microns and less than 20 microns) of the Apollo 17 deep drill core sections 70009-70006 (upper 130 cm). Modal data were also obtained for the less than 20 micron size fraction. Preliminary results indicate that (1) the chemistry of the greater than 90 micron and 20-90 micron coarse fractions is identical but quite different from the less than 20 micron fine fraction; (2) the upper 50 cm of the drill core is highly enriched in mare material; (3) the dominant source of highland material is KREEPy instead of anorthositic; and (4) indigenous volatiles such as Zn are quite high in all size fractions.

Laul, J. C.↗
NASA NTRS1992

Four space application material coatings on the long-duration exposure flight (LDEF)

Four material coatings of different thickness were flown on the LDEF to determine their ability to perform in the harsh space environment. The coatings, located in the ram direction of the spacecraft, were exposed for 10 months to the low-Earth orbit (LEO) environment experienced by the LDEF at an orbit of 260 nautical miles. They consisted of indium oxide (In2O3), silicon oxide (SiO(x)), clear RTV silicone, and silicone with silicate-treated zinc oxide (ZnO). These coatings were flown to assess their behavior when exposed to atomic oxygen and to confirm their good radiative properties, stability, electrical conductivity, and resistance to UV exposure. The flown samples were checked and compared with the reference unflown samples using high-magnification optical inspection, ESCA analysis, weight changes and dimensional changes. These comparisons indicated the following: The 1000 A SiO(x) coating eroded uniformly, with minor changes in its radiative properties. The 100 A of In2O3 coating eroded completely down to the Kapton backing, with resultant losses of reflectance. The RTV-615 showed erosion, with carbon (C) content losses, while the Si remained constant, with a doubling of the oxygen (O) concentration. The RTV-615 silicone with K2SiO3-treated ZnO changed from flat to glossy white in appearance. It lost C, was etched, and increased its O content. The upper layers showed no remaining Zn or K. Losses of reflectance occurred within certain wavelength bands. It was not possible to evaluate the experimental oxygen reaction rate using the calculated atomic oxygen fluence of 2.6 x 10(exp 20) atoms/cm(exp 2) for the exposure of these coatings during the flight. The bakeout of the coatings was not carried out prior to the flight. Hence, the coating weight and dimensional losses included losses by outgassing products.

Scialdone, John J.↗
NASA NTRS1995

Four space application material coatings on the Long-Duration Exposure Facility (LDEF)

Four material coatings of different thicknesses were flown on the LDEF to determine their ability to perform in the harsh space environment. The coatings, located in the ram direction of the spacecraft, were exposed for 10 months to the low-Earth orbit (LEO) environments experienced by the LDEF at an orbit of 260 nautical miles. They consisted of indium oxide (In2O3), silicon oxide (SiO(x)), clear RTV silicone, and silicone with silicate-treated zinc oxide (ZnO). These coatings were flown to assess their behavior when exposed to atomic oxygen and to confirm their good radiative properties, stability, electrical conductivity, and resistance to UV exposure. The flown samples were checked and compared with the reference unflown samples using high-magnification optical inspection, ESCA analysis, weight changes, and dimensional changes. These comparisons indicated the following. The 1000 A SiO(x) coating eroded uniformly, with minor changes in its radiative properties. The 100 A In2O3 coating eroded completely down to the Kapton backing, with resultant losses of reflectance. The RTV-615 showed erosion, with carbon (C) content losses, while the Si remained constant, with a doubling of the oxygen (O) concentration. The RTV-615 silicone with K2SiO3-treated ZnO changed from flat to glossy white in appearance. It lost C, was etched, and increased its O content. The upper layers showed no remaining Zn or K. Losses of reflectance occurred within certain wavelength bands. It was not possible to evaluate the experimental oxygen reaction rate using the calculated atomic oxygen fluence of 2.6 x 10(exp 20) atoms/cm(exp 2) for the exposure of these coatings during the flight. The bakeout of the coatings was not carried out prior to the flight. Hence, the coating weight and dimensional losses included losses by outgassing products.

Scialdone, John J.↗
NASA NTRS1993

Chemical analyses of provided samples

Two batches of samples were received and chemical analysis was performed of the surface and near surface regions of the samples by the surface analysis by laser ionization (SALI) method. The samples included four one-inch optics and several paint samples. The analyses emphasized surface contamination or modification. In these studies, pulsed sputtering by 7 keV Ar+ and primarily single-photon ionization (SPI) by coherent 118 nm radiation (at approximately 5 x 10(exp 5) W/cm(sup 2) were used. For two of the samples, also multiphoton ionization (MPI) at 266 nm (approximately 5 x 10(exp 11) W/cm(sup 2) was used. Most notable among the results was the silicone contamination on Mg2 mirror 28-92, and that the Long Duration Exposure Facility (LDEF) paint sample had been enriched in K and Na and depleted in Zn, Si, B, and organic compounds relative to the control paint.

Becker, Christopher H.↗
NASA NTRS1995

The z = 0.8596 damped Ly-alpha absorbing galaxy toward PKS 0454+039

We present Hubble Space Telescope (HST) and ground-based data on the Z(sub abs) = 0.8596 metal-line absorption system along the line of sight to PKS 0454+0356. The system is a moderate-redshift damped Ly-alpha system, with N(H I) = (5.7 +/- 0.3) x 10(exp 20)/sq cm as measured from the Faint Object Spectrograph (FOS) spectrum. We also present ground-based images which we use to identify the galaxy which most probably gives rise to the damped system; the most likely candidate is relatively underluminous by QSO absorber standards M(sub B) approximately -19.0 for A(sub 0) = 0.5 and H(sub 0) = 50 km/s/Mpc) and lies approximately 8.5/h kpc in projection from the QSO sight line. Ground-based measurements of Zn II, Cr II, and Fe II absorption lines from this system allow us to infer abundances of (Zn/H) = -1.1, (Cr/H) = -1.2, and (Fe/H) = -1.2 indicating overall metallicity similar to damped systems at z is greater than 2, and that the depletion of Cr and Fe onto dust grains may be even less important than in many of the high-redshift systems of comparable metallicity. Limits previously placed on the 21 cm optical depth in the z = 0.8596 system, together with our new N(H I) measurement, suggest a very high spin temperature for the H I, T(sub s) is greater than 580 K.

Steidel, Charles C.↗
NASA NTRS1998

Ceruloplasmin copper induces oxidant damage by a redox process utilizing cell-derived superoxide as reductant

Oxidative damage by transition metals bound to proteins may be an important pathogenic mechanism. Ceruloplasmin (Cp) is a Cu-containing plasma protein thought to be involved in oxidative modification of lipoproteins. We have previously shown that Cp increased cell-mediated low-density lipoprotein (LDL) oxidation by a process requiring cell-derived superoxide, but the underlying chemical mechanism(s) is (are) unknown. We now show that superoxide reduction of Cp Cu is a critical reaction in cellular LDL oxidation. By bathocuproine disulfonate (BCS) binding and by superoxide utilization, we showed that exogenous superoxide reduces a single Cp Cu atom, the same Cu required for LDL oxidation. The Cu atom remained bound to Cp during the redox cycle. Three avenues of evidence showed that vascular cells reduce Cp Cu by a superoxide-dependent process. The 2-fold higher rate of Cp Cu reduction by smooth muscle cells (SMC) compared to endothelial cells (EC) was consistent with their relative rates of superoxide release. Furthermore, Cp Cu reduction by cells was blocked by Cu,Zn superoxide dismutase (SOD1). Finally, the level of superoxide produced by EC and SMC was sufficient to cause the amount of Cu reduction observed. An important role of Cp Cu reduction in LDL oxidation was suggested by results showing that SOD1 inhibited Cp Cu reduction and LDL oxidation by SMC with equal potency, while tumor necrosis factor-alpha stimulated both processes. In summary, these results show that superoxide is a critical cellular reductant of divalent transition metals involved in oxidation, and that protein-bound Cu is a substrate for this reaction. The role of these mechanisms in oxidative processes in vivo has yet to be defined.

NASA Discipline Regulatory Physiology↗
NASA NTRS2003

Characterization of Al-Cu-Mg-Ag Alloy RX226-T8 Plate

Aluminum-copper-magnesium-silver (Al-Cu-Mg-Ag) alloys that were developed for thermal stability also offer attractive ambient temperature strength-toughness combinations, and therefore, can be considered for a broad range of airframe structural applications. The current study evaluated Al-Cu-Mg-Ag alloy RX226-T8 in plate gages and compared performance with sheet gage alloys of similar composition. Uniaxial tensile properties, plane strain initiation fracture toughness, and plane stress tearing resistance of RX226-T8 were examined at ambient temperature as a function of orientation and thickness location in the plate. Properties were measured near the surface and at the mid-plane of the plate. Tensile strengths were essentially isotropic, with variations in yield and ultimate tensile strengths of less than 2% as a function of orientation and through-thickness location. However, ductility varied by more than 15% with orientation. Fracture toughness was generally higher at the mid-plane and greater for the L-T orientation, although the differences were small near the surface of the plate. Metallurgical analysis indicated that the microstructure was primarily recrystallized with weak texture and was uniform through the plate with the exception of a fine-grained layer near the surface of the plate. Scanning electron microscope analysis revealed Al-Cu-Mg second phase particles which varied in composition and were primarily located on grain boundaries parallel to the rolling direction. Fractography of toughness specimens for both plate locations and orientations revealed that fracture occurred predominantly by transgranular microvoid coalescence. Introduction High-strength, low-density Al-Cu-Mg-Ag alloys were initially developed to replace conventional 2000 (Al-Cu-Mg) and 7000 (Al-Zn-Cu-Mg) series aluminum alloys for aircraft structural applications [1]. During the High Speed Civil Transport (HSCT) program, improvements in thermal stability were demonstrated for candidate aircraft wing and fuselage skin materials through the addition of silver to Al-Cu-Mg alloys based on Al 2519 chemistry [2]. Thermal stability of the resulting Al-Cu-Mg-Ag alloys, C415-T8 and C416-T8, was due to co-precipitation of the thermally stable . (AlCu) and ' (Al2Cu) strengthening phases [1-4]. The strength and toughness behavior was investigated for these alloys produced as 0.090-inch thick rolled sheet in the T8 condition and after various thermal exposures. The mechanical properties were shown to be competitive with conventional aircraft alloys, 2519-T8 and 2618-T8 [2]. During the Integral Airframe Structure (IAS) program, advanced aluminum alloys were examined for use in an integrally stiffened airframe structure where the skin and stiffeners would be machined from plate and extruded frames would be mechanically attached (see Figure 1) [5]. Advantages of integrally stiffened structure include reduced part count, and reduced assembly times compared to conventional built-up airframe structure. The near-surface properties of a thick plate are of significance for a machined integrally stiffened airframe structure since this represents the skin location. Properties measured at the mid-plane of the plate are more representative of the stiffener web. RX226 was developed to exploit strength-toughness improvements and thermal stability benefits of Al-Cu-Mg-Ag alloys in plate gages. This study evaluated the microstructure and properties of three gages of plate produced in the T8 condition.

Lach, Cynthia L.↗
NASA NTRS1976

Transitions of Zn XXII, Zn XXIII, Zn XXIV, Ge XXIV, and Ge XXV observed in laser-produced plasmas

Wavelengths and wave numbers are presented for zinc lines in the F I, O I, and N I isoelectronic sequences as well as for germanium lines in the F I and O I sequences. The transitions are of the type 2s(2)2p(k)-2s2p(k+1), and the lines were observed near 100 A in the spectra of plasmas produced by focusing the pulse from a high-power glass laser on to solid targets of different elements and compounds. The results are compared with prediction based on extrapolations of semiempirical formulas derived by Edlen (1969). The wavelengths and wave numbers of some of the corresponding transitions in Cu XXI, Cu XXII, Cu XXIII, Ga XXIII, and Ga XXIV are interpolated with a probable wavelength accuracy of at least plus or minus 0.02 A.

Behring, W. E.↗
NASA NTRS1985

Abundances of O, Mg, S, Cr, Mn, Ti, Ni and Zn from absorption lines of neutral gas in the Large Magellanic Cloud in front of R136

Weak absorption lines of C I, O I, Mg I, Mg II, Si I, Si II, P I, Cl I, Cr II, Mn II, Fe I, Ni II, Zn II, CO and C2 are detected in neutral gas in front of the 30 Doradus H II region by IUE spectra of R 136. The Large Magellanic Cloud abundances from the absorption lines are a factor of 2 or 3 below those of the Milky Way, in agreement with emission line study results. Neutral gas density and temperature are estimated from the observed excitation and ionization to be about 300/cu cm and 100 K, respectively; this implies a gas pressure of 30,000/cu cm K.

De Boer, K. S.↗
NASA NTRS1999

Layered double hydroxide stability. 1. Relative stabilities of layered double hydroxides and their simple counterparts

Solutions containing di- and trivalent metal chlorides [M(II) = Mg2+, Zn2+, Co2+, Ni2+, Mn2+; M(III) = Al3+, Fe3+] were titrated with NaOH to yield hydrotalcite-like layered double hydroxides (LDH), [[M(II)]1-x[M(III)]x(OH)2][Cl]x yH2O, by way of M(III) hydroxide/hydrous oxide intermediates. Analysis of the resultant titration curves yields nominal solubility constants for the LDH. The corresponding LDH stabilities are in the order Mg < Mn < Co approximately Ni < Zn for M(II) and Al < Fe for M(III). The stability of LDH relative to the separate metal hydroxides/hydrous oxides is discussed.

Non-NASA Center↗
NASA NTRS1986

Effect of crystallographical and geometrical changes of a ferrite head on magnetic signals during the sliding process with magnetic tape

This paper reviews changes in the crystalline structure and geometry of lapped Mn-Zn ferrite heads in sliding contact with magnetic tape and the effects of these changes on magnetic signals. A highly textured, polycrystalline structure was produced on the surface of a single-crystal Mn-Zn ferrite head when it was finished with an aluminum oxide lapping tape. Sliding this lapped surface against a magnetic tape produced a nearly amorphous structure. The sliding process led to a degradation in readback signal of 1 to 2 dB (short-wavelength recording). Furthermore, wear of the magnetic head caused geometrical changes in the head surface. The signal read back with the worn magnetic head was sensitive to operating parameters such as head displacement and tape tension. A change in operating parameters created head-to-tape spacings and, consequently, excessive gains or losses in the readback signal.

Miyoshi, K.↗