SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Vapor phase conversion of 3-hydroxybutyric and crotonic acid to propylene in a continuous-flow reactor over silica–alumina and niobium catalysts demonstrates a new strategy for producing renewable fuels and chemicals from wastewater carbon.
Nanostructured Cu catalysts have increased the selectivities and geometric activities for high value C–C coupled (C 2 ) products (ethylene, ethanol, and acetate) in the electrochemical CO (2) reduction reaction (CO (2) RR). The selectivity among the high-value C 2 products is also altered, where for instance the yield of acetate increases with alkalinity and is dependent on the catalyst morphology. The reaction mechanisms behind the selectivity towards acetate vs. other C 2 products remain controversial. In this work, we elucidate the reaction mechanism for acetate formation by using ab initio simulations, a coupled kinetic-transport model, and loading dependent experiments. We find that trends in acetate selectivity can be rationalized from variations in electrolyte pH and the local mass transport properties of the catalyst and not from changes in Cu's intrinsic activity. The selectivity mechanism originates from the transport of ketene, a stable (closed shell) intermediate, away from the catalyst surface into solution where it reacts to form acetate. While this type of mechanism has not yet been discussed in the CO (2) RR, variants of it may explain similar selectivity fluctuations observed for other stable intermediates like CO and acetaldehyde. Our proposed mechanism suggests that acetate selectivity increases with increasing pH, decreasing catalyst roughness and significantly varies with the applied potential.
In this study, we performed the CO 2 reduction reaction (CO 2 RR) using a structural composite catalyst of cuprous oxide (Cu 2 O) and silver (Ag) that was simultaneously electrodeposited. While the underneath Ag electrodeposits maintained their spiky backbone structures even after the CO 2 RR, the Cu 2 O deposits were reduced to Cu(111) and relocated on the backbone template. Here, the structural changes in Cu 2 O to Cu increase the active area of the Cu–Ag interface, resulting in a remarkable production rate of 125.01 μmol h -1 of liquid C 2+ chemicals via the stabilization of the C–C coupling of the key intermediate species of acetaldehyde. This study provides new insights into designing a bimetallic catalyst for producing sustainable C 2+ products from CO 2 without any selectivity towards the production of methane.
Here, photodissociation of pyruvic acid (PA) was studied in the gas-phase at 193 nm using two complementary techniques. The time-sliced velocity map imaging arrangement was used to determine kinetic energy release distributions of fragments and estimate dissociation timescales. The multiplexed photoionization mass spectrometer setup was used to identify and quantify photoproducts, including isomers and free radicals, by their mass-to-charge ratios, photoionization spectra, and kinetic time profiles. Using these two techniques, it is possible to observe the major dissociation products of PA photodissociation: CO 2 , CO, H, OH, HCO, CH 2 CO, CH 3 CO, and CH 3 . Acetaldehyde and vinyl alcohol are minor primary photoproducts at 193 nm, but products that are known to arise from their unimolecular dissociation, such as HCO, H 2 CO, and CH 4 , are identified and quantified. A multivariate analysis that takes into account the yields of the observed products and assumes a set of feasible primary dissociation reactions provides a reasonable description of the photoinitiated chemistry of PA despite the necessary simplifications caused by the complexity of the dissociation. These experiments offer the first comprehensive description of the dissociation pathways of PA initiated on the S 3 excited state. Most of the observed products and yields are rationalized on the basis of three reaction mechanisms: (i) decarboxylation terminating in CO 2 + other primary products (~50%); (ii) Norrish type I dissociation typical of carbonyls (~30%); and (iii) O—H and C—H bond fission reactions generating the H atom (~10%). The analysis shows that most of the dissociation reactions create more than two products. This observation is not surprising considering the high excitation energy (~51 800 cm –1 ) and fairly low energy required for dissociation of PA. We find that two-body fragmentation processes yielding CO 2 are minor, and the expected, unstable primary co-fragment, methylhydroxycarbene, is not observed because it probably undergoes fast secondary dissociation and/or isomerization. Norrish type I dissociation pathways generate OH and only small yields of CH 3 CO and HOCO, which have low dissociation energies and further decompose via three-body fragmentation processes. Experiments with d 1 -PA (CH 3 COCOOD) support the interpretations. The dissociation on S 3 is fast, as indicated by the products’ recoil angular anisotropy, but the roles of internal conversion and intersystem crossing to lower states are yet to be determined.
An IR–vacuum ultraviolet (VUV) ion-dip spectroscopy method is utilized to examine the IR spectrum of acetaldehyde oxide (CH3CHOO) in the overtone CH stretch (2νCH) spectral region. IR activation creates a depletion of the ground state population that reduces the VUV photoionization signal on the parent mass channel. IR activation of the more stable and populated syn-CH3CHOO conformer results in rapid unimolecular decay to OH + vinoxy products and makes the most significant contribution to the observed spectrum. The resultant IR–VUV ion-dip spectrum of CH3CHOO is similar to that obtained previously for syn-CH3CHOO using IR action spectroscopy with UV laser-induced fluorescence detection of OH products. The prominent IR features at 5984 and 6081 cm−1 are also observed using UV + VUV photoionization of OH products. Complementary theoretical calculations utilizing a general implementation of second-order vibrational perturbation theory provide new insights on the vibrational transitions that give rise to the experimental spectrum in the overtone CH stretch region. The introduction of physically motivated small shifts of the harmonic frequencies yields remarkably improved agreement between experiment and theory in the overtone CH stretch region. The prominent features are assigned as highly mixed states with contributions from two quanta of CH stretch and/or a combination of CH stretch with an overtone in mode 4. The generality of this approach is demonstrated by applying it to three different levels of electronic structure theory/basis sets, all of which provide spectra that are virtually indistinguishable despite showing large deviations prior to introducing the shifts to the harmonic frequencies.
Radiation of the plant pyridoxal 5'-phosphate (PLP)-dependent aromatic L -amino acid decarboxylase (AAAD) family has yielded an array of paralogous enzymes exhibiting divergent substrate preferences and catalytic mechanisms. Plant AAADs catalyze either the decarboxylation or decarboxylation-dependent oxidative deamination of aromatic L -amino acids to produce aromatic monoamines or aromatic acetaldehydes, respectively. These compounds serve as key precursors for the biosynthesis of several important classes of plant natural products, including indole alkaloids, benzylisoquinoline alkaloids, hydroxycinnamic acid amides, phenylacetaldehyde-derived floral volatiles, and tyrosol derivatives. In this paper, we present the crystal structures of four functionally distinct plant AAAD paralogs. Through structural and functional analyses, we identify variable structural features of the substrate-binding pocket that underlie the divergent evolution of substrate selectivity toward indole, phenyl, or hydroxyphenyl amino acids in plant AAADs. Moreover, we describe two mechanistic classes of independently arising mutations in AAAD paralogs leading to the convergent evolution of the derived aldehyde synthase activity. Applying knowledge learned from this study, we successfully engineered a shortened benzylisoquinoline alkaloid pathway to produce (S)-norcoclaurine in yeast. This work highlights the pliability of the AAAD fold that allows change of substrate selectivity and access to alternative catalytic mechanisms with only a few mutations.
Aldehyde dehydrogenases are versatile enzymes that serve a range of biochemical functions. Although traditionally considered metabolic housekeeping enzymes because of their ability to detoxify reactive aldehydes, like those generated from lipid peroxidation damage, the contributions of these enzymes to other biological processes are widespread. For example, the plant pathogen Pseudomonas syringae strain PtoDC3000 uses an indole-3-acetaldehyde dehydrogenase to synthesize the phytohormone indole-3-acetic acid to elude host responses. In this work we investigate the biochemical function of AldC from PtoDC3000. Analysis of the substrate profile of AldC suggests that this enzyme functions as a long-chain aliphatic aldehyde dehydrogenase. The 2.5 Å resolution X-ray crystal of the AldC C291A mutant in a dead-end complex with octanal and NAD + reveals an apolar binding site primed for aliphatic aldehyde substrate recognition. Functional characterization of site-directed mutants targeting the substrate- and NAD(H)-binding sites identifies key residues in the active site for ligand interactions, including those in the “aromatic box” that define the aldehyde-binding site. Overall, this study provides molecular insight for understanding the evolution of the prokaryotic aldehyde dehydrogenase superfamily and their diversity of function.
Abstract Growth suppression and defence signalling are simultaneous strategies that plants invoke to respond to abiotic stress. Here, we show that the drought stress response of poplar trees ( Populus trichocarpa ) is initiated by a suppression in cell wall derived methanol (MeOH) emissions and activation of acetic acid (AA) fermentation defences. Temperature sensitive emissions dominated by MeOH (AA/MeOH <30%) were observed from physiologically active leaves, branches, detached stems, leaf cell wall isolations and whole ecosystems. In contrast, drought treatment resulted in a suppression of MeOH emissions and strong enhancement in AA emissions together with volatiles acetaldehyde, ethanol, and acetone. These drought‐induced changes coincided with a reduction in stomatal conductance, photosynthesis, transpiration, and leaf water potential. The strong enhancement in AA/MeOH emission ratios during drought (400%–3500%) was associated with an increase in acetate content of whole leaf cell walls, which became significantly 13 C 2 ‐labelled following the delivery of 13 C 2 ‐acetate via the transpiration stream. The results are consistent with both enzymatic and nonenzymatic MeOH and AA production at high temperature in hydrated tissues associated with accelerated primary cell wall growth processes, which are downregulated during drought. While the metabolic source(s) require further investigation, the observations are consistent with drought‐induced activation of aerobic fermentation driving high rates of foliar AA emissions and enhancements in leaf cell wall O ‐acetylation. We suggest that atmospheric AA/MeOH emission ratios could be useful as a highly sensitive signal in studies investigating environmental and biological factors influencing growth‐defence trade‐offs in plants and ecosystems.
Lignin contains a variety of interunit linkages, leading to a range of potential decomposition products that can be used as carbon and energy sources by microbes. β-O-4 linkages are the most common in native lignin, and associated catabolic pathways have been well characterized. However, the fate of the mono-aromatic intermediates that result from β-O-4 dimer cleavage has not been fully elucidated. Here, we used experimental evolution to identify mutant strains of Novosphingobium aromaticivorans with improved catabolism of a model aromatic dimer containing a β-O-4 linkage, guaiacylglycerol-β-guaiacyl ether (GGE). We identified several parallel causal mutations, including a single nucleotide polymorphism in the promoter of an uncharacterized gene that roughly doubled the growth yield with GGE. We characterized the associated enzyme and demonstrated that it oxidizes an intermediate in GGE catabolism, β-hydroxypropiovanillone, to vanilloyl acetaldehyde. Identification of this enzyme and its key role in GGE catabolism furthers our understanding of catabolic pathways for lignin-derived aromatic compounds.
Ethanol and lactate are typical waste products of glucose fermentation. In mammals, glucose is catabolized by glycolysis into circulating lactate, which is broadly used throughout the body as a carbohydrate fuel. Individual cells can both uptake and excrete lactate, uncoupling glycolysis from glucose oxidation. Here we show that similar uncoupling occurs in budding yeast batch cultures of Saccharomyces cerevisiae and Issatchenkia orientalis . Even in fermenting S. cerevisiae that is net releasing ethanol, media 13C-ethanol rapidly enters and is oxidized to acetaldehyde and acetyl-CoA. This is evident in exogenous ethanol being a major source of both cytosolic and mitochondrial acetyl units. 2H-tracing reveals that ethanol is also a major source of both NADH and NADPH high-energy electrons, and this role is augmented under oxidative stress conditions. Thus, uncoupling of glycolysis from the oxidation of glucose-derived carbon via rapidly reversible reactions is a conserved feature of eukaryotic metabolism.
Moisture ingress is an established issue for photovoltaic module durability. Durability studies probing moisture effects typically evaluate performance losses at the module level, attributing global power losses to the overall humidity condition of the test environment while leaving local module behavior unknown. This project successfully develops an in situ short-wave infrared probe of moisture content in PV modules with demonstrated detection limits better than 100 ppm in EVA-encapsulated Al-BSF and PERC architectures (66 µg/cm3) and applicability across the range of terrestrial conditions. Combining this optical moisture quantification method (water reflectometry detection, WaRD) with peel testing of interfaces, biased photoluminescence imaging of performance, and first principles computation, we correlate module moisture content and cell performance over the course of accelerated damp heat tests. By performing multi-level humidity and thermal accelerated testing over thousands of hours (0, 65 and 85% RH and 25, 65, and 85°C), we are able to attribute effects of individual environmental stresses and the dependence on module architecture. Using first-principles computational chemistry, we find that the decomposition of EVA to acetic acid (Norrish II) is thermodynamically preferred over a pathway to acetaldehyde (Norrish I), elucidating the underlying chemistry of encapsulant degradation. We also find it is likely that water segregates to the stable interfaces of the cell, especially the SiNx/EVA interface. We find that moisture is strongly correlated with reduction in adhesion at the interfaces of the cells, particularly at Ag fingers. We show uniquely that the peel strength required to delaminate the encapsulant from the front of the cell depends not only on the exposure to a high heat and humid environment, but also to the moisture content during the mechanical testing, indicating an important interaction between when mechanical stresses are faced in terms of the moisture content of the module and its durability. We find that the background sheet resistance (that is, the sheet resistance rise not attributable to finger interruptions or cracks) is substantially higher in the backsheet mini-modules vs glass-glass packages when humidity and temperature are faced. This increase in power loss due to the background resistance increase over time in damp heat in glass-backsheet modules resulted in ~3-4% larger decrease in relative PCE compared to glass-glass modules. In glass-backsheet modules, the effect of the moisture dose alone is comparable or greater than that of the combined temperature and water term, suggesting that glass-backsheet modules are overall more susceptible to moisture induced performance loss. Finally, we show that thin film PV modules are amenable to WaRD measurement, based on the ability to detect moisture in POE encapsulants or in the cell stack itself. The ease of WaRD measurement and its few requirements on the bill of materials should enable broad applicability of this technique for studying the effects of moisture in PV.
Direct conversion of bioethanol to C₃⁺olefins is a promising pathway for sustainable aviation fuel (SAF) production, but catalyst deactivation limits long-term operation. The stability and deactivation mechanisms of multifunctional Cu–Y/Beta zeolite catalysts were investigated for ethanol-to-olefins conversion over 300 h time-on-stream in the presence of H2. Catalytic testing reveals progressive losses in ethanol conversion and C₃⁺ olefin selectivity accompanied by increased acetaldehyde formation. The catalyst testing studies correlate with a suite of characterizations of fresh, spent, and regenerated catalysts to identify the deactivation factors. The loss of Y Lewis acid sites is the primary deactivation element. Reversible acid site deactivation is caused by coke deposition, which blocks Y-derived Lewis acid sites responsible for aldol condensation, MPV reduction, and alcohol dehydration. Minor irreversible deactivation is observed and possibly results from hydrothermal dehydroxylation of Y–silanol interactions, resulting in permanent loss of Lewis acidity without zeolite framework degradation or Y aggregation. Cu sites undergo limited agglomeration into small nanoparticles but contribute insignificantly to catalyst deactivation, under the investigated time frame. Oxidative regeneration removes coke and redistributes Cu sites, leading to full recovery of the initial catalytic performance though the Y Lewis acid sites are unable to fully recover. These findings establish Lewis acid site degradation as the primary deactivation mechanism impacting long-term catalyst stability
In recent years, biofuels have been receiving significant attention because of their potential for decreasing carbon emissions and providing a long-term renewable solution to unsustainable fossil fuels. Currently, lactones are some of the alternatives being produced. Many lactones occur in a range of natural substances and have many advantages over bioethanol. In this study, the oxidation of alpha-angelica lactone initiated by ground-state atomic oxygen, O( 3 P), was studied at 298, 550, and 700 K using synchrotron radiation coupled with multiplexed photoionization mass spectrometry at the Lawrence Berkeley National Lab (LBNL). Photoionization spectra and kinetic time traces were measured to identify the primary products. Ketene, acetaldehyde, methyl vinyl ketone, methylglyoxal, dimethyl glyoxal, and 5-methyl-2,4-furandione were characterized as major reaction products, with ketene being the most abundant at all three temperatures. Possible reaction pathways for the formation of the observed primary products were computed using the CBS–QB3 composite method.
Coastal cities offer a unique environment for studying aerosol-cloud interactions and the effects of urban emissions on cloud properties. As part of the Eastern Pacific Cloud Aerosol Precipitation Experiment (EPCAPE), the Partitioning Thrust by Los Alamos National Laboratory (EPCAPE-PT-LANL) was conducted. Our campaign focused on measuring the optical and chemical properties of aerosols and their interactions within marine stratocumulus clouds in La Jolla, California. EPCAPE-PT-LANL enhances the primary goals of EPCAPE through innovative observations of vapor-phase transitions between aerosols and cloud droplets, the impact of black carbon on aerosol-cloud dynamics, and the effects of cloud processing on aerosol optical properties. Instrument: IONICON High-Resolution PTR-TOF-MS - Trace VOC Analyzer. Concentrations were calculated based on theoretical reaction rates of each species with H3O+. Details of the calculation are found in the PTR-MS Ionicon Manual. Data Notes: It is a high-resolution PTR-TOF-MS we have sub-selected relevant species. Contact us if you want additional data products from this instrument. Header: - CalculatedAcetonitrile[ppbv]: The concentration of acetonitrile expressed in parts per billion by volume (ppbv). - CalculatedAcetaldehyde[ppbv]: The concentration of acetaldehyde expressed in parts per billion by volume (ppbv). - CalculatedAcetone[ppbv]: The concentration of acetone expressed in parts per billion by volume (ppbv). - CalculatedAceticAcid[ppbv]: The concentration of acetic acid expressed in parts per billion by volume (ppbv). - CalculatedIsoprene[ppbv]: The concentration of isoprene expressed in parts per billion by volume (ppbv). - CalculatedMVK[ppbv]: The concentration of methyl vinyl ketone (MVK) and methacrolein (MACR) expressed in parts per billion by volume (ppbv). - CalculatedMEK[ppbv]: The concentration of methyl ethyl ketone (MEK) expressed in parts per billion by volume (ppbv). - CalculatedBenzene[ppbv]: The concentration of benzene expressed in parts per billion by volume (ppbv). - CalculatedToluene[ppbv]: The concentration of toluene expressed in parts per billion by volume (ppbv).
Clostridium thermocellum, a cellulolytic thermophilic anaerobe, is considered by many to be a prime candidate for the realization of consolidated bioprocessing (CBP) and is known as an industry standard for biofuel production. C. thermocellum is among the best biomass degraders identified to date in nature and produces ethanol as one of its main products. Many studies have helped increase ethanol titers in this microbe; however, ethanol production using C. thermocellum is still not economically viable. Therefore, a better understanding of its ethanol synthesis pathway is required. The main pathway for ethanol production in C. thermocellum involves the bifunctional aldehyde-alcohol dehydrogenase (AdhE). To better understand the function of the C. thermocellum AdhE, we used cryo-electron microscopy (cryo-EM) to obtain a 3.28 A structure of the AdhE complex. This high-resolution structure, in combination with molecular dynamics simulations, provides insight into the substrate channeling of the toxic intermediate acetaldehyde, indicates the potential role of C. thermocellum AdhE to regulate activity and cofactor pools, and establishes a basis for future engineering studies. The containment strategy found in this enzyme offers a template that could be replicated in other systems where toxic intermediates need to be sequestered to increase the production of valuable biochemicals.
Thermochemical conversion of biomass to produce drop-in quality biofuels typically involves hydrodeoxygenation (HDO) steps following catalytic fast pyrolysis (CFP) to remove excess oxygen and create a more-stable bio-oil product. HDO reactions are performed by co-feeding the CFP vapor-phase product and H2 gas over a bi-functional catalyst. Noble-metal catalysts supported on reducible metal oxides (e.g., Pt/TiO2) are active and selective toward these HDO reactions. Griffin and co-workers showed that Pt/TiO2 catalysts promote the desired deoxygenation steps for m-cresol HDO while mitigating undesired C-C bond-breaking steps that reduce the overall value/energy density of the biofuel. Such model-compound studies to inform the design of improved catalysts for HDO chemistry are necessary to improve the overall process economics/efficiencies for biofuels production. One important class of bio-derived compounds that has not been studied extensively with respect to HDO chemistry, particularly at the atomic level, is carboxylic acids. Past experimental work indicates that Pt/C and Pt/TiO2 catalysts are selective toward C-C and C-O bond-dissociation products for acetic acid HDO, respectively. To understand the role of Pt/TiO2 active sites in this observed change in selectivity and guide catalyst development, the work in this presentation focuses on modeling the role of Pt-metal and Pt-TiO2-interfacial sites in promoting key C-C bond-breaking, C-O bond-breaking, and (de)hydrogenation steps in acetic acid HDO. Density functional theory (DFT) calculations were performed using the Vienna Ab initio Simulation Package (VASP). The exchange-correlation functional was approximated by the Perdew-Burke-Ernzerhof functional. Dispersion interactions were captured using the D3 method. Projector augmented-wave potentials described electron-ion interactions, and electron wavefunctions were expanded via a planewave basis with an energy cutoff of 500 eV. Activation barriers were calculated using the climbing image nudged elastic band method. Results and Discussion: To discern the role of Pt-metal and Pt-TiO2 interface sites in promoting acetic acid HDO chemistry, Pt(111) slab and anatase TiO2(101)-supported Pt-nanowire (PtNW/OH-TiO2) surface models were constructed, respectively. Because H2 is co-fed in HDO reactions, the anatase support was terminated with OH groups. Interfacial vacancies have been shown to facilitate Ru/TiO2-catalyzed phenol HDO; thus, an interfacial model with an OH vacancy was also considered (PtNW/OHv-TiO2). Pt-TiO2-interface sites stabilize adsorption of all studied acetic acid HDO surface intermediates relative to terrace Pt-metal sites, particularly when an interfacial-OH vacancy is present. Oxygenated species prefer to bind at the OH vacancy through the O atom, suggesting a preference for C-O over C-C bond cleavage at these sites. This hypothesis is supported by net-negative and net-positive average shifts in the reaction energy and activation energy barriers for C-O and C-C bond-breaking steps, respectively, at Pt-TiO2-interface sites relative to Pt-metal sites. Using the calculated energetics, the predicted minimum-energy pathway was determined for each surface. Pt(111) is predicted to follow decarboxylation, producing undesired methane and carbon dioxide. Conversely, PtNW/OH-TiO2 and PtNW/OHv-TiO2 are both predicted to produce desired acetaldehyde and ethane. The interfacial vacancy may also play a key role in facilitating the first C-O bond-breaking step in acetic acid HDO, lowering the barrier by 0.6 eV relative to the defect-free interface model. These results demonstrate the critical role of the Pt-TiO2 interface in the shift in acetic acid HDO selectivity experimentally observed on Pt/C and Pt/TiO2 catalysts. The results herein demonstrate the important role of the Pt-TiO2 interface and interfacial oxygen vacancies in improving the carbon efficiency for HDO reactions in CFP upgrading.
Alcohol net-zero carbon fuels will play a significant role in decarbonization of the hard-to-electrify transportation sectors. However, the combustion process in alcohol-fueled engines generate toxic aldehydes. For commercialization of net-zero carbon fuels on engines, compliance with the stringent U.S. EPA regulations is necessary. Here, this contribution focuses on reactivity of alcohols and aldehydes on commercial diesel oxidation catalysts (DOC) to inform selection of future net-zero carbon fuels. Alcohol (and aldehyde) light-off temperatures were measured on aged DOCs under full synthetic engine-exhaust conditions. Methanol was the most reactive, while ethanol completely oxidized at higher temperatures. Alcohols typically formed less reactive aldehyde intermediates. DRIFTS revealed strongly adsorbing surface formates and acetates during methanol and ethanol oxidation, respectively, resulting in inhibition effects. Preliminary alcohol oxidation mechanisms combining flow reactor and DRIFTS observations are presented. Aldehydes inhibited CO oxidation. Minimal N 2 O formation was observed for the alcohols investigated.
Not Available