Search NASA⌕ Search

SEARCH · Search NASA

Results for “acoustically”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Acoustic performance of a 50.8-cm (20-inch) diameter variable-pitch fan and inlet. Volume 2: Acoustic data

Results from acoustic tests on a 50.8 cm (20 inch) QCSEE Under-the-Wing (UTW) engine, variable pitch fan and inlet simulator are tabulated. Tests were run in both forward and reverse thrust mdoes with a bellmouth inlet, five accelerating inlets (one hardwall and four treated), and four low Mach number inlets (one hardwall and three treated). The 1/3 octave-band acoustic data are presented for the model size on the measured 5.2 m (17.0 ft) arc and also data scaled to full QCSEE size 71:20 on a 152.4 m (500 ft) sideline.

Bilwakesh, K. R.↗
NASA NTRS1983

Measurement of transmission loss characteristics using acoustic intensity techniques at the KU-FRL Acoustic Test Facility

The transmission loss characteristics of panels using the acoustic intensity technique is presented. The theoretical formulation, installation of hardware, modifications to the test facility, and development of computer programs and test procedures are described. A listing of all the programs is also provided. The initial test results indicate that the acoustic intensity technique is easily adapted to measure transmission loss characteristics of panels. Use of this method will give average transmission loss values. The fixtures developed to position the microphones along the grid points are very useful in plotting the intensity maps of vibrating panels.

Roskam, J.↗
NASA NTRS1983

Acoustic responses of coupled fluid-structure system by acoustic-structural analogy

The use of an analogy between structural mechanics and acoustics makes it possible to solve fluid-structural interaction (FSI) problems using an existing structural analysis computer program. This method was implemented in MSC/NASTRAN program and the FSI analysis was performed using two dimensional coupled fluid beam model to assess and evaluate the adequacy of this approach. The coupled modal analysis of 3-D model is also briefly discussed. The normal mode, modal frequency response and transient response analysis of 2-D coupled fluid beam system is presented. The significant reduction of the acoustic pressure response at the fluid structure interface is observed as a result of fluid structure interaction.

Shin, Y. S.↗
NASA NTRS1986

Acoustic Translation of an Acoustically Levitated Sample

Acoustic-levitation apparatus uses only one acoustic mode to move sample from one region of chamber to another. Sample heated and cooled quickly by translation between hot and cold regions of levitation chamber. Levitated sample is raised into furnace region by raising plunger. Frequency of sound produced by transducers adjusted by feedback system to maintain (102) resonant mode, which levitates sample midway between transducers and plunger regardless of plunger position.

Barmatz, M. B.↗
NASA NTRS1993

The acoustic and instability waves of jets confined inside an acoustically lined rectangular duct

An analysis of linear wave modes associated with supersonic jets confined inside an acoustically lined rectangular duct is presented. Mathematical formulations are given for the vortex-sheet model and continuous mean flow model of the jet flow profiles. Detailed dispersion relations of these waves in a two-dimensional confined jet as well as an unconfined free jet are computed. Effects of the confining duct and the liners on the jet instability and acoustic waves are studied numerically. It is found that the effect of the liners is to attenuate waves that have supersonic phase velocities relative to the ambient flow. Numerical results also show that the growth rates of the instability waves could be reduced significantly by the use of liners. In addition, it is found that the upstream propagating neutral waves of an unconfined jet could become attenuated when the jet is confined.

Hu, Fang Q.↗
NASA NTRS1999

Acoustic Treatment Design Scaling Methods: Numerical Simulation of the Nonlinear Acoustic Impedance of a Perforated Plate Single-Degree-of-Freedom Resonator Using a Time-Domain Finite Difference Method - Volume 4

Single-degree-of-freedom resonators consisting of honeycomb cells covered by perforated facesheets are widely used as acoustic noise suppression liners in aircraft engine ducts. The acoustic resistance and mass reactance of such liners are known to vary with the intensity of the sound incident upon the panel. Since the pressure drop across a perforated liner facesheet increases quadratically with the flow velocity through the facesheet, this is known as the nonlinear resistance effect. In the past, two different empirical frequency domain models have been used to predict the Sound Pressure Level effect of the incident wave on the perforated liner impedance, one that uses the incident particle velocity in isolated narrowbands, and one that models the particle velocity as the overall velocity. In the absence of grazing flow, neither frequency domain model is entirely accurate in predicting the nonlinear effect that is measured for typical perforated sheets. The time domain model is developed in an attempt to understand and improve the model for the effect of spectral shape and amplitude of multi-frequency incident sound pressure on the liner impedance. A computer code for the time-domain finite difference model is developed and predictions using the models are compared to current frequency-domain models.

Kraft, R. E.↗
NASA NTRS2000

Acoustic and Aerothermal Performance Test of the Axisymmetric Coannular Ejector Nozzle: Acoustic Performance - Volume 2

Acoustic and propulsion performance testing of a model-scale Axisymmetric Coannular Ejector nozzle was conducted in the Boeing Low-speed Aeroacoustic Facility. This nozzle is a plug nozzle with an ejector design to provide aspiration of about 20% of the engine flow. A variety of mixing enhancers were designed to promote mixing of the engine and the aspirated flows. These included delta tabs, tone-injection rods, and wheeler ramps. This report addresses the acoustic aspects of the testing. The spectral characteristics of the various configurations of the nozzle are examined on a model-scale basis. This includes indentifying particular noise sources contributing to the spectra and the data are projected to full-scale flyover conditions to evaluate the effectiveness of the nozzle, and of the various mixing enhancers, on reducing the Effective Perceived Noise Levels.

Herkes, William↗
NASA NTRS2011

Ares I Scale Model Acoustic Test Lift-Off Acoustics

The lift-off acoustic (LOA) environment is an important design factor for any launch vehicle. For the Ares I vehicle, the LOA environments were derived by scaling flight data from other launch vehicles. The Ares I LOA predicted environments are compared to the Ares I Scale Model Acoustic Test (ASMAT) preliminary results.

Counter, Douglas D.↗
NASA NTRS2011

Ares I Scale Model Acoustic Test Liftoff Acoustic Results and Comparisons

Conclusions: Ares I-X flight data validated the ASMAT LOA results. Ares I Liftoff acoustic environments were verified with scale model test results. Results showed that data book environments were under-conservative for Frustum (Zone 5). Recommendations: Data book environments can be updated with scale model test and flight data. Subscale acoustic model testing useful for future vehicle environment assessments.

Counter, Doug↗
NASA NTRS2018

Flow Quality Survey of the 8- by 6-Foot Supersonic Wind Tunnel (2015 Test) Prior to the 9- by 15-Foot Acoustic Low-Speed Wind Tunnel Acoustic Improvement Modifications

Prior to the NASA Glenn Research Center 9- by 15-Foot Low-Speed Wind Tunnel (9x15 LSWT) undergoing significant structural and acoustic modifications beginning in 2017, a flow quality survey (FQS) was conducted to characterize the flow quality of the 8- by 6-Foot Supersonic Wind Tunnel (8x6 SWT) test section and facility air dryer. The data from this FQS will be compared to data collected during a FQS following the completion of the 9x15 LSWT Acoustic Improvement Modifications. This document contains only the FQS data collected in November 2015 using the 16-inch-diameter cone cylinder and a set of twenty air dryer bed wind anemometers. The ability to reach the extents of the 8x6 SWT operating envelope with a large blockage model was verified through the 16-inch-diameter cone cylinder tests. The flow uniformity and angularity at the entrance of the facility air dryer was assessed and quantified using the air dryer bed wind anemometers.

Flow Quality Survey↗
DOE OSTI2022

Plasma-Assisted Epitaxy of Piezoelectric Sc x Al 1-x N Films on Sapphire for Use in Harsh-Environment Microwave Acoustic Sensors

The Sc x Al 1-x N wurtzite structure has been shown theoretically and experimentally to exhibit significantly higher piezoelectric coupling compared to pure AlN. In this work, a plasma-assisted epitaxial growth method has been used to synthesize epitaxial (0002) Sc x Al 1-x N films on c-sapphire substrates from x = 0.07 to 0.30 by co-evaporating high-purity Sc and Al sources in the presence of a nitrogen plasma generated by an RF plasma source. Epitaxial Sc x Al 1-x N films with highly oriented (0002) grains and in-plane registry were produced on c-sapphire substrates that were pre-exposed to the nitrogen plasma to form an oxynitride seed layer. Growth of Sc x Al 1-x N films was carried out at 930°C under both metal-rich and N-rich conditions using precisely controlled Sc, Al, and N-plasma fluxes. Metal-rich depositions yielded non-(0002)-oriented Sc x Al 1-x N grains and intermetallic ScAl grains. Nitrogen-rich growth with a Sc/Al flux ratio of 1/3 produced the best (0002) epitaxy as determined by x-ray diffraction analysis. Surface acoustic wave resonator (SAWR) devices were fabricated from 500-nm-thick Sc x Al 1-x N and AlN films to extract their electromechanical coupling coefficients, k 2 . As the Sc concentration in the films increases, the degree of (0002) epitaxy is reduced, yet the value of k 2 increases becasue there is more Sc in the wurzite lattice despite the decreased level of (0002) grain alignment. As a result, the use of a 10-nm-thick Si x N y capping layer on top of the Sc x Al 1-x N films aids in preventing etching during SAWR device photolithography and also helps hinder film oxidation up to 800°C.

36 MATERIALS SCIENCE↗
NASA NTRSDate not supplied

Preliminary Design of a Distributed Facesheet Acoustic Liner for Broadband Acoustic Attenuation

The purpose of this study is to investigate the acoustic performance of a liner with a distributed facesheet and a uniform depth core for broadband attenuation. The distributed facesheet is comprised of a cluster of three distinct cell resonators of varying hole diameter and porosity replicated over the active liner treatment area. A target frequency range of 1000 to 2000 Hz and an attenuation metric of 10 dB are chosen. An optimizer is used to determine the optimal facesheet designs for flow conditions of Mach 0.0 and Mach 0.3. The samples are tested in the Grazing Flow Impedance Tube at NASA Langley Research Center. The two liners are shown to achieve at least 10 dB attenuation over frequency ranges of 700 and 400 Hz, respectively, when tested at their respective designed flow speeds. This study demonstrate that a distributed facesheet with a uniform depth core can be successfully used to achieve broadband sound absorption.

acoustic liners↗
NASA NTRS1979

Aerodynamic and acoustic investigation of inverted velocity profile coannular exhaust nozzle models and development of aerodynamic and acoustic prediction procedures

Five co-annular nozzle models, covering a systematic variation of nozzle geometry, were tested statically over a range of exhaust conditions including inverted velocity profile (IVP) (fan to primary stream velocity ratio 1) and non IVP profiles. Fan nozzle pressure ratio (FNPR) was varied from 1.3 to 4.1 at primary nozzle pressure ratios (PNPR) of 1.53 and 2.0. Fan stream temperatures of 700 K (1260 deg R) and 1089 K(1960 deg R) were tested with primary stream temperatures of 700 K (1260 deg R), 811 K (1460 deg R), and 1089 K (1960 deg R). At fan and primary stream velocities of 610 and 427 m/sec (2000 and 1400 ft/sec), respectively, increasing fan radius ratio from 0.69 to 0.83 reduced peak perceived noise level (PNL) 3 dB, and an increase in primary radius ratio from 0 to 0.81 (fan radius ratio constant at 0.83) reduced peak PNL an additional 1.0 dB. There were no noise reductions at a fan stream velocity of 853 m/sec (2800 ft/sec). Increasing fan radius ratio from 0.69 to 0.83 reduced nozzle thrust coefficient 1.2 to 1.5% at a PNPR of 1.53, and 1.7 to 2.0% at a PNPR of 2.0. The developed acoustic prediction procedure collapsed the existing data with standard deviation varying from + or - 8 dB to + or - 7 dB. The aerodynamic performance prediction procedure collapsed thrust coefficient measurements to within + or - .004 at a FNPR of 4.0 and a PNPR of 2.0.

Larson, R. S.↗