Search NASA⌕ Search

SEARCH · Search NASA

Results for “adjoint method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Tunable phononic bandgap materials designed via topology optimization

Topology optimization is used to design phononic bandgap materials that are tunable by mechanical deformation. A periodic media is considered, which due to the assumption of length scale separation, allows the dispersion relations to be obtained by analyzing a single unit cell subjected to Floquet–Bloch boundary conditions. A finite macroscopic deformation is applied to the unit cell to affect its geometry and hence dispersion. We tune the dispersion–deformation relation to our liking by solving a topology optimization problem using nonlinear programming. The adjoint method is employed to compute the sensitivities, and the non-differentiability of degenerate eigenvalues is avoided using symmetric polynomials. Several tunable phononic crystal designs are presented. Also, a verification analysis is performed, wherein the optimized design is interpreted and analyzed using a conforming finite element mesh.

42 ENGINEERING↗

Symmetric spectrum current drive due to finite radial drift effects

We report the drift surfaces of minority heated ions differ from flux surfaces due to finite poloidal gyroradius effects. As the minority poloidal gyroradius approaches radial scale lengths in the plasma, the difference between drift and flux surfaces can modify the heating and lead to a symmetric spectrum minority counter-current being driven. In response, a corresponding overall net co-current of comparable size is driven. This beneficial symmetric spectrum current drive in a tokamak is due to the parallel velocity asymmetry in the drift departure from a flux surface. As this new source of driven current is a side effect of minority heating it comes without any additional economic cost to reactor power balance. The symmetric spectrum current driven for near Maxwellian minorities is evaluated by an adjoint method and found to be modest. However, minority heating typically results in strong non-Maxwellian features on minority distributions so it may be possible to drive a significantly larger co-current. A related evaluation is performed for alpha particles in a deuterium minority heated plasma with a tritium majority. The low density of the alphas tends to keep this driven symmetric spectrum current small, but at very high heating levels a significant co-current might be driven. Other mechanisms to drive co-current with a symmetric spectrum are discussed and estimated, including asymmetric electron drag and focusing of the applied minority heating radio frequency fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Exploration of the parameter space of quasisymmetric stellarator vacuum fields through adjoint optimisation

Optimising stellarators for quasisymmetry leads to strongly reduced collisional transport and energetic particle losses compared with unoptimised configurations. Although stellarators with precise quasisymmetry have been obtained in the past, it remains unclear how broad the parameter space is where good quasisymmetry may be achieved. We study the range of aspect ratios and rotational transform values for which stellarators with excellent quasisymmetry on the boundary can be obtained. A large number of Fourier harmonics is included in the boundary representation, which is made computationally tractable by the use of adjoint methods to enable fast gradient-based optimisation and by the direct optimisation of vacuum magnetic fields, which converge more robustly compared with solutions from magnetohydrostatics. Several novel configurations are presented, including stellarators with record levels of quasisymmetry on a surface, three field period quasiaxisymmetric stellarators with substantial magnetic shear, and compact quasisymmetric stellarators at low aspect ratios similar to tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

CFD-based design optimization of ducted hydrokinetic turbines

Abstract Hydrokinetic turbines extract kinetic energy from moving water to generate renewable electricity, thus contributing to sustainable energy production and reducing reliance on fossil fuels. It has been hypothesized that a duct can accelerate and condition the fluid flow passing the turbine blades, improving the overall energy extraction efficiency. However, no substantial evidence has been provided so far for hydrokinetic turbines. To investigate this problem, we perform a CFD-based optimization study with a blade-resolved Reynolds-averaged Navier–Stokes (RANS) solver to explore the design of a ducted hydrokinetic turbine that maximizes the efficiency of energy extraction. A gradient-based optimization approach is utilized to effectively deal with the high-dimensional design space of the blade and duct geometry, with gradients being calculated through the adjoint method. The final design is re-evaluated through higher-fidelity unsteady RANS (URANS) simulations. Our optimized ducted turbine achieves an efficiency of about 54% over a range of operating conditions, higher than the typical 46% efficiency of unducted turbines.

13 HYDRO ENERGY↗

Optimized Tandem Catalyst Patterning for CO 2 Reduction Flow Reactors

Tandem catalysis involves two or more catalysts arranged in proximity within a single reaction vessel, with the aim of synergistically aligning the catalysts’ reaction pathways to maximize overall system performance. This study presents a proof of concept showing the integration of continuum transport modeling with design optimization in a simplified two-dimensional flow reactor setup for electrochemical CO 2 reduction. Ag catalysts provide the CO 2 ⟶ CO reaction capability, and Cu catalysts provide the CO ⟶ high-value products reaction capability. Given a set of input parameters, the optimization algorithm uses adjoint methods to modify the Ag/Cu surface patterning in order to maximize the current density toward high-value products, such as ethylene. The optimized designs yield significant performance enhancement especially at more negative applied voltages (i.e., stronger surface reactions) and for larger numbers of patterning sections. For an applied voltage of −1.7 V vs. SHE, the 12-section optimized design increases the current density toward ethylene by up to 65% compared to the unoptimized 2-section design. For the optimized cases, observed differences in the production and consumption of CO (the key intermediate species) and minimized zones of low CO reactant surface concentration on Cu sections explain the improved reactor performance.

CO2 reduction↗

Quandary

Quandary numerically simulates and optimizes the time-evolution of open quantum systems. The underlying dynamics are modelled by Lindblad's master equation, a linear ordinary differential equation (ODE) describing quantum systems interacting with the environment. Quandary solves this ODE numerically by applying a time-stepping integration scheme, and utilizes a gradient-based optimization approach to determine optimal control pulses that drive the quantum system to a desired target state. Two optimization objectives are considered: (a) Unitary gate optimization that finds controls to realize a unitary gate transformation, and (b) optimal reset that aims to drive the quantum system to the ground states. Gradient-based optimization schemes utilizing Petsc's Tao optimization package are applied to generate control pulses that minimize the respective measure. To evaluate the gradient of the objective function, the discrete adjoint method is used while leveraging techniques from Algorithmic Differentiation to produce exact and consistent gradients. To mitigate excessive execution run times, the software can be build together with the XBraid software library which provides a parallelization strategy to distribute the time-evolution of the underlying dynamics onto multiple processor.

Petersson, NilsA.↗

DPFEHM: a differentiable subsurface physics simulator

The Earth’s subsurface is a key resource that provides energy via fossil fuels and geothermal sources, stores drinking water, and is used in the fight against climate change via carbon sequestration. Simulating the physical processes that occur in the Earth’s subsurface with computers enables better use of this resource. DPFEHM is a Julia package that includes computer models with a focus on the Earth’s subsurface, especially fluid flow, which is critical for the aforementioned applications. DPFEHM is able to solve the groundwater flow equations (single phase flow), Richards equation (air/water), the advection-dispersion equation, and the 2d wave equation. One of the key features of DPFEHM is that it supports automatic differentiation, so it can be integrated into machine learning workflows using frameworks such as Flux or PyTorch. The automatic differentiation capabilities give it the same performance as adjoint methods.

54 ENVIRONMENTAL SCIENCES↗

Cohesive phase-field fracture and a PDE constrained optimization approach to fracture inverse problems

In recent years there has been a proliferation of modeling techniques for forward predictions of crack propagation in brittle materials, including: phase-field/gradient damage models, peridynamics, cohesive-zone models, and G/XFEM enrichment techniques. However, progress on the corresponding inverse problems has been relatively lacking. Taking advantage of key features of existing modeling approaches, we propose a parabolic regularization of Barenblatt cohesive models which borrows extensively from previous phase-field and gradient damage formulations. An efficient explicit time integration strategy for this type of nonlocal fracture model is then proposed and justified. In addition, we present a C++ computational framework for computing in- put parameter sensitivities efficiently for explicit dynamic problems using the adjoint method. This capability allows for solving inverse problems involving crack propagation to answer interesting engineering questions such as: 1) what is the optimal design topology and material placement for a heterogeneous structure to maximize fracture resistance, 2) what loads must have been applied to a structure for it to have failed in an observed way, 3) what are the existing cracks in a structure given various experimental observations, etc. In this work, we focus on the first of these engineering questions and demonstrate a capability to automatically and efficiently compute optimal designs intended to minimize crack propagation in structures.

97 MATHEMATICS AND COMPUTING↗

Adjoint-based sensitivity analysis of localized ignition in a non-premixed hydrogen-air mixing layer

A space-time discrete-adjoint method recently developed for high-fidelity compressible turbulence simulations is extended to chemically-reacting mixtures for the purpose of measuring sensitivity of localized ignition in a non-premixed hydrogen-air mixing layer. The ignition source is modeled as a source in the energy equation, which introduces several parameters that need to be chosen with care. Because ignition is inherently discontinuous in parameter space (i.e., it succeeds or fails after some period), the resulting gradients in modeling parameters are ill-defined near its threshold. To this end, a cost functional is designed to provide short-time sensitivity in concert with an indicator function that informs whether or not successful ignition has occurred. The corresponding sensitivity is used in a line-search algorithm to identify a point on the ignition boundary in high-dimensional parameter space (7 dimensional in our 7-parameter demonstration). This is used to quantify the relative importance of parameters on ignition.

Capecelatro, Jesse↗

Symmetric spectrum current drive due to finite radial drift effects

The drift surfaces of minority heated ions differ from flux surfaces due to finite poloidal gyroradius effects. As the minority poloidal gyroradius approaches radial scale lengths in the plasma the difference between drift and flux surfaces can modify the heating and lead to a symmetric spectrum minority counter-current being driven. In response, a corresponding overall net co-current of comparable size is driven. This beneficial symmetric spectrum current drive in a tokamak is due to the parallel velocity asymmetry in the drift departure from a flux surface. As this new source of driven current is a side effect of minority heating it comes without any additional economic cost to reactor power balance. The symmetric spectrum current driven for near Maxwellian minorities is evaluated by an adjoint method and found to be modest. However, minority heating typically results in strong non-Maxwellian features on minority distributions so it may be possible to drive significantly larger co-current. A related evaluation is performed for alpha particles in a deuterium minority heated plasma with a tritium majority. The low density of the alphas tends to keep this driven symmetric spectrum current small, but at very high heating levels a significant co-current might be driven. Other mechanisms to drive co-current with a symmetric spectrum are discussed and estimated, including asymmetric electron drag and focusing of the applied minority heating radio frequency fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Runaway electrons in tokamaks

The generation of runaway electrons is a complex and important phenomenon that impacts many areas of plasma physics. Due to the decrease of electron collision frequency with increasing velocity, electrons under strong electric field can experience unlimited “runaway” acceleration. In tokamaks, runaway electrons can be produced in disruptions, due to the strong inductive electric field formed as the thermal energy of plasma gets rapidly lost. This population of runaway electrons can undergo an exponential growth, denoted the runaway electron avalanche, due to hard collisions between relativistic runaway electrons and low energy electrons. It is predicted that in a large tokamak device like the International Thermonuclear Experimental Reactor (ITER), a runway electron beam generated in a disruption event can potentially cause severe damage to the device, which poses a significant challenge for ITER to achieve its mission. It is therefore extremely important to seek an effective mitigation mechanism for runaway electrons. Experimental efforts have been made to study the properties of runaway electrons in tokamaks, including their generation, diffusion, and radiation. In order to understand these experimental results, extensive theoretical and simulation studies of runaway electron physics are required. The main topic of this thesis is to study the wave particle interaction associated with runaway electron beams in tokamaks. The runaway electrons can emit and absorb electromagnetic waves through resonances, and can be diffused in momentum space by the waves. Initially, we address the Cherenkov radiation of runaway electrons, which originates from the polarization of the plasma medium. The energy and momentum loss of the Cherenkov radiation can be modeled by adding a correction to the Coulomb logarithm in the collisional drag force. Subsequently, we address pitch angle scattering caused by normal modes in the plasma, which are driven unstable by the anisotropicity of the runaway electron beam. The fluctuating electromagnetic fields are found to act as a seed for the unstable normal modes. Numerical simulations show that the pitch angle scattering effect from the normal modes, mainly whistler waves, can be significantly larger than that from collisional pitch angle scattering. Finally, we present a synthetic diagnostic tool we developed to calculate the electron cyclotron emission (ECE) from the runaway electrons, and successfully reproduce the prompt growth of the ECE signal observed in DIII-D quiescent runaway electron (QRE) experiments. Within the thesis, we also present the application of the adjoint method to runaway electron research, and show the calculations of the runaway probability function (RPF) and the expected loss time (ELT). These calculations not only help depict the dynamics of runaway electrons in momentum space, but also can be used to efficiently calculate experimentally relevant quantities such as the critical electric field for runaway electron avalanche and the avalanche growth rate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Adjoint Petrov–Galerkin method for non-linear model reduction

Here, we formulate a new projection-based reduced-order modeling technique for non-linear dynamical systems. The proposed technique, which we refer to as the Adjoint Petrov–Galerkin (APG) method, is derived by decomposing the generalized coordinates of a dynamical system into a resolved coarse-scale set and an unresolved fine-scale set. A Markovian finite memory assumption within the Mori–Zwanzig formalism is then used to develop a reduced-order representation of the coarse scales. This procedure leads to a closed reduced-order model that displays commonalities with the adjoint stabilization method used in finite elements. The formulation is shown to be equivalent to a Petrov–Galerkin method with a non-linear, time-varying test basis, thus sharing some similarities with the Least-Squares Petrov–Galerkin method. Theoretical analysis examining a priori error bounds and computational cost is presented. Numerical experiments on the compressible Navier–Stokes equations demonstrate that the proposed method can lead to improvements in numerical accuracy, robustness, and computational efficiency over the Galerkin method on problems of practical interest. Improvements in numerical accuracy and computational efficiency over the Least-Squares Petrov–Galerkin method are observed in most cases.

42 ENGINEERING↗

An adjoint-based optimization method for jointly inverting heterogeneous material properties and fault slip from earthquake surface deformation data

SUMMARY Analysis of tectonic and earthquake-cycle associated deformation of the crust can provide valuable insights into the underlying deformation processes including fault slip. How those processes are expressed at the surface depends on the lateral and depth variations of rock properties. The effect of such variations is often tested by forward models based on a priori geological or geophysical information. Here, we first develop a novel technique based on an open-source finite-element computational framework to invert geodetic constraints directly for heterogeneous media properties. We focus on the elastic, coseismic problem and seek to constrain variations in shear modulus and Poisson’s ratio, proxies for the effects of lithology and/or temperature and porous flow, respectively. The corresponding nonlinear inversion is implemented using adjoint-based optimization that efficiently reduces the cost function that includes the misfit between the calculated and observed displacements and a penalty term. We then extend our theoretical and numerical framework to simultaneously infer both heterogeneous Earth’s structure and fault slip from surface deformation. Based on a range of 2-D synthetic cases, we find that both model parameters can be satisfactorily estimated for the megathrust setting-inspired test problems considered. Within limits, this is the case even in the presence of noise and if the fault geometry is not perfectly known. Our method lays the foundation for a future reassessment of the information contained in increasingly data-rich settings, for example, geodetic GNSS constraints for large earthquakes such as the 2011 Tohoku-oki M9 event, or distributed deformation along plate boundaries as constrained from InSAR.

Geochemistry & Geophysics↗

Adjoint-Based Sensitivity and Uncertainty Analysis for Density and Composition: A User’s Guide

The ability to perform sensitivity analyses using adjoint-based first-order sensitivity theory has existed for decades. This paper provides guidance on how adjoint sensitivity methods can be used to predict the effect of material density and composition uncertainties in critical experiments, including when these uncertain parameters are correlated or constrained. Two widely used Monte Carlo codes, MCNP6 (Ref. 2) and SCALE 6.2 (Ref. 3), are both capable of computing isotopic density sensitivities in continuous energy and angle. Additionally, Perkó et al. have shown how individual isotope density sensitivities, easily computed using adjoint methods, can be combined to compute constrained first-order sensitivities that may be used in the uncertainty analysis. This paper provides details on how the codes are used to compute first-order sensitivities and how the sensitivities are used in an uncertainty analysis. Constrained first-order sensitivities are computed in a simple example problem.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Adjoint-Based Sensitivity and Uncertainty Analysis for Density and Composition: A User's Guide

The ability to perform sensitivity analyses using adjoint-based sensitivity theory has existed for decades . This paper provides guidance on how adjoint sensitivity methods can be used to predict the effect of material density and composition uncertainties in critical experiments, including when these uncertain parameters are correlated or constrained. Two widely used Monte Carlo codes, MCNP6 and SCALE, are both capable of computing isotopic sensitivities in continuous energy and angle. Additionally, Perko et al. have shown how individual isotope sensitivities, easily computed using adjoint methods, can be combined to compute constrained sensitivities that may be used in the uncertainty analysis. This paper provides details on how the codes are used to compute sensitivities and how the sensitivities are used in an uncertainty analysis. Constrained sensitivities are computed in a simple example problem. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A Comparison of the FW-CADIS and MR-CADIS Variance Reduction Methods

The Consistent Adjoint Driven Importance Sampling (CADIS) method, which uses an adjoint deterministic estimate for making variance reduction parameters that optimize Monte Carlo (MC) shielding calculations, was introduced in 1998. This method was designed to optimize a single tally, typically an integrated response such as a detector count rate or a dose rate. Because both deterministic and stochastic methods are employed, CADIS is referred to as a hybrid method. In 2007, the forward-weighted CADIS (FW-CADIS) method was introduced to optimize several tallies at once, giving more uniform relative uncertainties among the tallies for both high-flux and low-flux areas of the problem. This method can be used for several small detectors, for semi-global problems (mesh tally over a large fraction of the problem), or for global problems (mesh tally over the entire problem). Optimization can be done for an integrated response such as a dose rate D(r) as a function of position, the total flux {phi}(r) as a function of position, or the space/energy flux {phi}(r,E). Both the CADIS and FW-CADIS methods have been in the MAVRIC sequence of SCALE for three versions (6.0 in 2009, 6.1 in 2011, and 6.2 in 2016). The ADVANTG package released in 2015 uses the CADIS and FW-CADIS methods to accelerate MCNP neutron/photon shielding calculations. In 2014, the multi-response CADIS (MR-CADIS) method was presented as a way to obtain even more uniform relative uncertainties for problems with multiple tallies than those obtained with FW-CADIS. The method does not use a forward deterministic calculation but instead uses one adjoint calculation for every tally to be optimized in the Monte Carlo calculation. This work compares the above methods.

42 ENGINEERING↗