Search NASA⌕ Search

SEARCH · Search NASA

Results for “alloy electrode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Electrochemical recovery of Gd into liquid Bi in molten LiCl-KCl-GdCl 3

The electrochemical recovery of Gd into liquid Bi electrodes was investigated in molten LiCl-KCl-GdCl 3 electrolyte at 773–973 K using constant currents of 10–150 mA cm −2 . High round-trip coulombic efficiency (>97 %) was demonstrated for deposition and removal of Gd into and from liquid Bi at all temperatures, confirming chemically reversible electrode reactions towards high recovery yield of Gd using liquid Bi. Furthermore, the overpotential associated with deposition of Gd into the liquid Bi electrode gradually increased with current density and decreased with temperature. At the lowest temperature of 773 K, a steep increase in overpotential was evident at high current densities due to slower mass transport and low solubility of Gd in liquid Bi (0.5 at.% Gd). Based on the impedance spectra of Bi electrodes at 773–973 K, the exchange current density was estimated to be 110–220 mA cm −2 , indicating facile charge transfer at the liquid electrode-electrolyte interface. Post-mortem characterization of Bi cathodes after electrolysis at 873 K indicated the formation of a solid GdBi(s) compound layer at the Bi electrode surface. Chemical analysis of Bi cathodes at various deposited Gd compositions resulted in Faradaic efficiencies of ∼75–84 %, promising a high recovery yield of Gd from molten salts using a strongly-interacting liquid Bi electrode.

36 - MATERIALS SCIENCE↗
DOE OSTI2023

High-Temperature Rotating Disk Electrode Study of Platinum Bimetallic Catalysts in Phosphoric Acid

Understanding the H 3 PO 4 effect on the catalyst’s activity under a relevant condition is important for high-temperature polymer electrolyte membrane fuel cell (HT-PEMFC) catalyst research. Here, we report a high-temperature rotating disk electrode (HT-RDE) study of oxygen reduction reaction (ORR) in H 3 PO 4 . With the regular electrochemical protocol, we found that H 3 PO 4 reduction could occur during cyclic voltammetry study and form a reductive species—phosphorus acid (H 3 PO 3 ). Further, to obtain reliable ORR measurement, we optimized the protocol to avoid the H 3 PO 3 generation. The ORR activity of carbon-supported PtM (M = Fe, Co, Ni, Ru, Pd, and Ir) bimetallic alloy catalysts measured with this HT-RDE method showed higher ORR activity than Pt. To understand the alloying effect, we combine experiments in diluted solutions to distinguish the alloying effect on Pt–O binding and Pt–H 3 PO 4 binding. The results indicate that H 3 PO 4 mainly reduces available sites for ORR, with little effect on neighboring site’s Pt–O binding via Pt–H 3 PO 4 interaction, which is also supported by the density functional theory calculation of the Pt–O binding energy with/without H 2 PO 4 . Further study in a phosphoric acid-doped quaternary ammonium-biphosphate ion pair coordinated polyphenylene (PA-QAPOH) membrane electrode assembly (MEA) shows that the active alloy catalyst has better performance in both the HT-RDE and MEA. Also, the MEA gives higher ORR activity than the HT-RDE because of the higher pressure and less phosphoric acid content of the MEA. Yet, the gap between the HT-RDE and MEA is significantly smaller than that between the room temperature (RT)-RDE and MEA, suggesting the importance of temperature and H 3 PO 4 concentration in understanding ORR in HT-PEMFCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

High performance earth-abundant electrocatalysts for hydrogen evolution reaction and other reactions

Electrodes for catalyzing electrochemical reactions (e.g., the hydrogen evolution reaction) are provided. The electrode may comprise a ternary pyrite-phase transition metal phosphochalcogenide (e.g., CoPS) disposed on a substrate, wherein the ternary pyrite-phase transition metal phosphochalcogenide is a solid material of a ternary compound of a transition metal, phosphorous (P), and a chalcogen, the solid material characterized by a substantially single, ternary alloy phase having a pyrite crystal structure. Methods of using and making the electrodes are also provided.

Jin, Song↗
DOE OSTI2026

Translating Fundamental Insights into Ag-Based Bimetallic Electrocatalysts to Anion-Exchange Membrane Fuel Cells

To address challenges of high costs and scalability for fuel cells, it is essential to develop af-fordable and earth-abundant materials that are Pt-group-metal (PGM)-free. Recent advance-ments in PGM-free electrocatalysis for the oxygen reduction reaction (ORR) in alkaline media show that high catalyst loadings are needed to achieve high reaction rates; however, there are associated mass transport limitations. To address this issue, we develop low-loading ionomer-less Ag-bimetallic thin films by alloying with 3d block elements or Sn. We bridge knowledge from fundamental rotating disk electrode (RDE) studies to gas-diffusion cathodes in high-temperature anion-exchange membrane fuel cells (HT-AEMFCs), resulting in high-activity ORR catalysis and peak power densities up to 1.2 W cm-² geo for the Ag-Sn and Ag-Co alloys. Here, experimental post-characterization and theoretical calculations reveal small Co or Sn oxide nano-islands on Ag as likely active sites enhancing ORR activity, ultimately offering these low-loading PGM-free ORR materials as a viable path towards sustainable energy conversion.

Catalysts↗
DOE OSTI2021

A comparative study of Bi, Sb, and BiSb for electrochemical nitrogen reduction leading to a new catalyst design strategy

Recent studies identified Bi as one of the most promising non-noble metal elements that can promote the electrochemical N 2 reduction reaction (ENRR) to produce NH 3 . The electronic features that make Bi a promising ENRR catalyst may also be owned by Sb that belongs to the same group as Bi. Thus, the ENRR properties of Bi, Sb, and a BiSb alloy were investigated comparatively to identify common characteristics that facilitate the ENRR. These catalysts were prepared as uniform coating layers on high surface area carbon felt electrodes, which could serve as both regular electrodes and pseudo-gas diffusion electrodes. The experimental results demonstrated that while Bi and Sb show comparable ENRR performances, the formation of a BiSb alloy distinctively increases the faradic efficiency for NH 3 production. Additionally, the X-ray photoelectron spectroscopy results revealed that Bi in BiSb possesses a partial positive charge while Sb in BiSb possesses a partial negative charge, which can impact the way the catalyst surface interacts with the reactants and reaction intermediates of the ENRR and hydrogen evolution reaction (HER), the major competing reaction with the ENRR. Computational investigations including the Bader charge analysis and Gibbs free energy calculations for the elemental steps of the ENRR and HER provided an explanation of how the formation of a BiSb alloy can change the selectivity for the ENRR. The combined experimental and theoretical results and discussion contained in this study lead to a new strategy for designing efficient metal catalysts for the ENRR. Additionally, this study investigated how the use of gas phase and dissolved N 2 affected the ENRR performances of the Bi, Sb, and BiSb catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Mass spectral molecular mapping shows benefits of thermal evaporation in prelithiated silicon-based electrodes

Silicon based composites have become increasingly popular as potential anodes for lithium-ion batteries due to their large storage capacity and potential ability to generate batteries with energy densities greater than 350 Wh kg −1 . These anodes often see reduced initial columbic efficiency (ICE) due to disruptive volume expansionup to 300% and continuous solid electrolyte interphase (SEI) layer formation. Prelithiation, where an excess reservoir of Li is added to the electrode to compensate for irreversible SEI formation losses during their sample preparation, has proven to solve the issue of immediate capacity loss. Thermal evaporation is a prelithiation technique with limited studies on its effectiveness. In this study, time-of-flight secondary ion mass spectrometry (ToF-SIMS) is used to highlight the benefits of prelithiation via thermal evaporation. ToF-SIMS provides chemical mapping and spatial information in 2D and 3D visualizing the deposition of lithium, identifying Li x Si y alloy and Li x Si y O z silicate formation, and the distribution of lithium passivation into the electrodes. Passivation under different atmospheric conditions, such as inert Argon (Ar) and Ar/ carbon dioxide (CO 2 ), highlights the impact of the environment on the passivation effectiveness and formation of Li x Si y alloy and Li x Si y O z silicate. The ToF-SIMS molecular imaging and depth profiling results indicate that prelithiation via thermal evaporation effectively distributes lithium throughout the depth profile thickness of several hundred nanometers. It induces a greater degree of Li x Si y O z silicate formation over Li x Si y alloy. Our ToF-SIMS characterization results show the effectiveness of thermal evaporation in producing a more stable electrode and an electrode with an effective lithium reserve that can preserve its capacity.

Parker, Gabriel D. [Oak Ridge National Laboratory ↗
DOE OSTI2022

High-Performance InZn Alloy Anodes toward Practical Aqueous Zinc Batteries

Aqueous Zn batteries have high safety, low-cost and potential of delivering comparable energy density to alkali-ion batteries. However, its practical application is largely hampered by the limited cycle life associated with Zn anodes under conditions of high depth of discharge and high plating current densities. In this work, we report on electrodeposited indium-zinc alloy anodes that have well-dispersed zinc-domains surrounding indium domains that form a porous structure after dealloying which greatly improves tolerance to Zn dendrite formation. The InZn anodes exhibit low polarization of ~5 to 25 mV and demonstrate 700 cycles at a current density of ~10 mA cm -2 with a capacity of 5 mAh cm-2 capacity (45% depth-of-discharge). Full cells with an InZn anode, dibenzo[b,i]thianthrene-5,7,12,14-tetraone (DTT) cathode, in 2M ZnSO 4 deliver a capacity of ~ 110 mAh g -1 and good stability over 40 cycles. Finally, the work reveals a rational design of Zn-based anodes towards practical battery applications and opens the curtain for future development of aqueous Zn batteries.

25 ENERGY STORAGE↗
DOE OSTI2024

Effects of open circuit immersion and vertex potential on potentiodynamic polarization scans of metallic biomaterials

Abstract Electrodes made of commercially pure titanium (CP-Ti) and a CoCrMo alloy are immersed at an open circuit in a phosphate buffer saline electrolyte at room temperature for different durations prior to electrochemical analyses. Open circuit potential measurements, electrochemical impedance spectroscopy measurements, and cyclic potentiodynamic polarization (CPP) scans are used to assess the impact of the immersion time on derived property values. Stable passivation layers formed on both materials during immersion. The corrosion potentials determined from the anodic legs of CPP scans become more cathodic, and the corrosion currents decrease to lower values after longer immersion times. Measured currents indicate the layers formed on CP-Ti stabilize during forward anodic scans and persist to the vertex potential, whereas passivation breakdown occurs during anodic scans with CoCrMo with active corrosion at voltages up to the vertex potential. The characteristics of the return cathodic legs of CPP scans represent the surface conditions at the vertex potential: characteristic corrosion property values derived from the test responses represent passive surfaces on CP-Ti and leached surfaces on CoCrMo rather than intrinsic properties of those materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The study of local overheating and plasma formation on stainless steel z-pinch targets

Plasma formation from intensely ohmically heated conductors is known to be highly non-uniform, as local overheating can be driven by micron-scale imperfections. Detailed understanding of plasma formation is required to predict the performance of magnetically driven physics targets and magnetically-insulated transmission lines (MITLs). Previous LDRD-supported work (projects 178661 and 200269) developed the electrothermal instability (ETI) platform, on the Mykonos facility, to gather high-resolution images of the self-emission from the non-uniform ohmic heating of z-pinch rods. Experiments studying highly inhomogeneous alloyed aluminum captured complex heating topography. To enable detailed comparison with magnetohydrodynamic (MHD) simulation, 99.999% pure aluminum rods in a z-pinch configuration were diamond-turned to ~10nm surface roughness and then further machined to include well-characterized micron-scale "engineered" defects (ED) on the rod's surface (T.J. Awe, et al., Phys. Plasmas 28, 072104 (2021)). In this project, the engineered defect hardware and diagnostic platform were used to study ETI evolution and non-uniform plasma formation from stainless steel targets. The experimental objective was to clearly determine what, if any, role manufacturing, preparation, or alloy differences have in encouraging nonuniform heating and plasma formation from high-current density stainless steel. Data may identify improvements that may be implemented in the fabrication/preparation of electrodes used on the Z machine. Preliminary data shows that difference in manufacturer has no observed effect on ETI evolution, stainless alloy 304L heated more uniformly than alloy 310 at similar current densities, and that stainless steel undergoes the same evolutionary ETI stages as ultra-pure aluminum, with increased emission tied to areas of elevated surface roughness.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effect of electrochemical cycling on microstructures of nanocomposite silicon electrodes using hyperpolarized 129 Xe and 7 Li NMR spectroscopy

The microstructural stability of composite electrodes during electrochemical cycling is critically important as it dictates the performance of Li-ion batteries. The issue becomes even more important for the high capacity alloying anode such as silicon that typically exhibits dramatic lithiation–delithiation-induced volume changes. The solid electrolyte interphase (SEI) layer formed on the active electrode surface has a profound effect on the overall microstructural stability of composite electrodes. An ideal SEI layer allows Li+ ions in and out of the electrode, but is an insulator to electrons, preventing the electrolyte from being further reduced. However, the SEI layers formed during initial lithiation may experience changes or degradation with subsequent cycling, adversely affecting the electrode performance. A combination of hyperpolarized 129 Xe and 7 Li nuclear magnetic resonance spectroscopies was applied to probe the microstructures of nanocomposite silicon electrodes at various stages of the lithiation–delithiation cycle. The results obtained from this study shed light on the degradation mechanism of nanocomposite Si electrodes upon electrochemical cycling and should prove useful in the effort to design more robust electrodes in the future.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Localized corrosion: Passive film breakdown vs. Pit growth stability, Part VI: Pit dissolution kinetics of different alloys and a model for pitting and repassivation potentials

Here, the pitting resistance of SS316L, SS304, SS430, and pure Fe was studied in chloride-containing solution. Among these alloys, SS316L exhibits the highest pit initiation rate, but also the highest pitting potential. To explain this phenomenon, the maximum pit dissolution current density (i diss,max ) of the alloys in saturated pit solution was measured using one-dimensional artificial pit electrodes. A lower i diss,max was found to correlate with higher pitting and repassivation potentials. Based on a recently proposed pitting framework, a conceptual model for pitting and repassivation potentials was established, based on which the effect of i diss,max on pitting resistance was discussed.

one-dimensional artificial pit electrode↗
DOE OSTI2023

High-performance ionomerless cathode anion-exchange membrane fuel cells with ultra-low-loading Ag–Pd alloy electrocatalysts

Rapid translation of catalysts from fundamental studies to high-performance devices could facilitate the process of developing and commercializing anion-exchange membrane fuel cells (AEMFCs). Traditionally, translation from material screening in three-electrode rotating disk electrode (RDE) cells to AEMFCs is complicated by differences in microenvironments, e.g. solid ionomer/membrane vs liquid electrolyte. Herein, we introduce a platform for translation to devices that utilizes ionomerless ultra-low-loading Ag-Pd alloy electrocatalyst cathodes synthesized by co-physical vapor deposition (PVD). Our ionomerless cathodes allow for systematic H 2 -O 2 AEMFC experiments while demonstrating comparable activity trends to those in three-electrode cells. Furthermore, here we show that our Ag 10 Pd 90 -based AEMFC reaches a peak power density of ~1 W cm$_{geo}^{-2}$ and ~10 W mg$_{PGM Cathode}^{-1}$ satisfying the U.S. Department of Energy’s platinum-group-metal (PGM) loading and cost targets. Our approach shows promise in facilitating the rapid translation between three-electrode studies and AEMFCs, offering a simple and effective design for decreasing PGM loadings.

25 ENERGY STORAGE↗
DOE OSTI2020

Atomically Dispersed Nickel(I) on an Alloy‐Encapsulated Nitrogen‐Doped Carbon Nanotube Array for High‐Performance Electrochemical CO 2 Reduction Reaction

Abstract Single‐atom catalysts (SACs) show great promise for electrochemical CO 2 reduction reaction (CRR), but the low density of active sites and the poor electrical conduction and mass transport of the single‐atom electrode greatly limit their performance. Herein, we prepared a nickel single‐atom electrode consisting of isolated, high‐density and low‐valent nickel(I) sites anchored on a self‐standing N‐doped carbon nanotube array with nickel–copper alloy encapsulation on a carbon‐fiber paper. The combination of single‐atom nickel(I) sites and self‐standing array structure gives rise to an excellent electrocatalytic CO 2 reduction performance. The introduction of copper tunes the d‐band electron configuration and enhances the adsorption of hydrogen, which impedes the hydrogen evolution reaction. The single‐nickel‐atom electrode exhibits a specific current density of −32.87 mA cm −2 and turnover frequency of 1962 h −1 at a mild overpotential of 620 mV for CO formation with 97 % Faradic efficiency.

Zhang, Tianyu↗
DOE OSTI2020

Electrodeposited Zinc-based Films as Anodes for Aqueous Zinc Batteries

Zinc-based batteries have attracted extensive attention in recent years, due to high safety, high capacities, environmental friendliness, and low cost compared to lithium ion batteries. However, the zinc anode suffers primarily from dendrite formation as a mode of failure in the mildly acidic system. Herein, we report on electrochemically deposited zinc (ED Zn) and copper-zinc (brass) alloy anodes, which are critically compared with a standard commercial zinc foil. The film electrodes are of commercially relevant thicknesses (21 and 25µM). The electrodeposited zinc-based anodes exhibit low electrode polarization (~0.025V) and stable cycling performance in 50 cycle consecutive experiments from 0.26-10 mA cm-2 compared to commercial Zn foil. Coulombic efficiencies at 1 mA cm-2 were over 98% for the electrodeposited zinc-based materials and were maintained for over 100 cycles. Furthermore, full cells with an electrodeposited Zn/brass anode, EMD MnO2 cathode, in 1M ZnSO4 + 0.1M MnSO4 delivered capacities of 96.3, and 163 mAh g-1, respectively, at a 100 mA g-1 compared to 92.1 mAh g-1 for commercial Zn. The zinc-based anodes also show better rate capability, delivering full cell capacities of 35.9 and 47.5 mAh g-1 at high current of up to 3 A g-1. Lastly, the electrodeposited zinc-based anodes show enhanced capacity for up to 100 cycles at 100 mA g-1, making them viable anodes for commercial use.

Fayette, Matthew R.↗
DOE OSTI2025

The search for high-entropy fuel-cell catalysts using disorder descriptors

The transition to a hydrogen economy depends on efficient, affordable catalysts for fuel cells. Platinum—the industry standard for fuel-cell electrodes—is costly and scarce, highlighting the need for practical alternatives. High-entropy alloys offer vast compositional diversity and tunable properties that can mitigate these issues, yet their chemical complexity and configurational disorder have hindered rational discovery. Here, we introduce a data-driven framework that couples machine learning with first-principles disorder descriptors—including the entropy forming ability, disordered enthalpy-entropy descriptor, and electronic-structure similarity metrics to platinum—to predict alloy synthesizability and catalytic performance. These descriptors are applied for the first time in the context of fuel-cell catalyst discovery. The workflow rapidly screens more than 20 000 compositions and identifies several platinum-free candidates that are economically viable, readily scalable, and exhibit promising predicted activity. These results demonstrate that disorder descriptors are reliably predicted by machine learning models and can be effectively integrated into materials-discovery pipelines, accelerating innovation across complex compositional spaces.

fuel-cell catalysts↗
DOE OSTI2022

An Improved Pathway to Ethylene Glycol via CO 2

This report describes our efforts to develop a partial electrochemical oxidation process to produce formaldehyde selectively from methanol. The effort examined numerous potential anode materials in pursuit of 70% Faradaic efficiency for conversion of methanol to formaldehyde. Among the various electrode materials tested herein both Pt and PtRu were identified as the most promising catalysts in this process as the Faradaic efficiency obtained in these cases are 40% and >70% respectively. Several other 3d transition metals, Pt group metals and their alloys were also studied in which the Faradaic efficiency was obtained within 5-30%. In case of Pt and PtRu bulk metal electrode shows higher selectivity to formaldehyde compared to their nanostructured materials. Based on the literature, nanostructured Pt and PtRu are considered as active catalysts for methanol fuel cells, thus, lower selectivity to formaldehyde with nano Pt and PtRu in our case was attributed to their preferential oxidation of methanol to CO 2 . Severe catalyst deactivation was noted when 0.5 (M) sulfuric acid was used as the electrolyte irrespective of catalyst formulation. On the other hand, much higher activity and selectivity for formaldehyde was noted when alkaline electrolyte was employed during oxidation. Considering selective electrochemical oxidation of methanol to formaldehyde is an area which is underexplored as of today, our findings about catalyst formulation and process condition is noteworthy in this direction. Both bulk metal electrodes of Pt and PtRu may be cost prohibitive and thus present challenges to the scale up this technology. Therefore, we recognize that additional efforts are needed to develop catalysts with high activities and Faradaic efficiencies similar to bulk electrodes for the electrooxidation of methanol to formaldehyde.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Improving Durability of Fuel Cells with Platinum-rich Alloy Cathode Catalysts

Pt 3 Co-alloy based nanoparticle catalysts are very active for oxygen reduction reaction (ORR) thereby enabling high performance of proton exchange membrane fuel cells (PEMFC) for automotive propulsion. However, these catalyst materials degrade due to a combination of electrochemical surface area (ECSA) loss and dissolution of cobalt-alloying element from the nanoparticles. Dissolution of cobalt has a two-fold impact on the durability of fuel cells—i) a loss in the low-current density kinetic region due to a decrease in specific activity and ii) a loss in the high-current density transport region due to Co 2+ contamination of the ionomer phase. Cobalt dissolution-contamination needs to be mitigated as it limits fuel cell performance and lifetime for heavy-duty automotive applications. In this article, we study the use of PtCo-alloy catalysts with Pt-rich compositions using catalyst-specific accelerated stress test measurement in membrane electrode assemblies to decrease the amount of dissolved Co and mitigate its subsequent contamination effects. We demonstrate Pt 5 Co and Pt 7 Co compositions to enable significant improvements in durability (∼50 mV and ∼100 mV with respect to Pt 3 Co after 30,000 voltage cycles) with a minor but acceptable compromise in the initial specific activity of the catalyst.

08 HYDROGEN↗