Search NASA⌕ Search

SEARCH · Search NASA

Results for “anisotropic crystal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Orientated Growth of Ultrathin Tellurium by van der Waals Epitaxy

Abstract Tellurium, as an elemental van der Waals semiconductor, has intriguing anisotropic physical properties owing to its inherent 1D crystal structure. To exploit the anisotropic and thickness‐dependent behavior, it is important to realize orientated growth of ultrathin tellurium. Here, van der Waals epitaxial growth of Te on the surface of 2D transition metal dichalcogenides is systematically investigated. Orientated growth of Te with a thickness down to 5 nm is realized on three‐fold symmetric substrates (WSe 2 , WS 2 , MoSe 2 , and MoS 2 ), where the atomic chains of Te are aligned with the armchair directions of substrates. 1D/2D moiré superlattices are observed for the Te/WSe 2 heterostructure. This method is extended to the growth of SeTe alloys, providing flexibility for band engineering. Finally, growth of textured Te film is demonstrated on the lower‐symmetry surface of WTe 2 .

Zhao, Chunsong↗
DOE OSTI2021

Few-layer tin sulfide (SnS): Controlled synthesis, thickness dependent vibrational properties, and ferroelectricity

Group IV monochalcogenides, anisotropic van der Waals crystals (and black phosphorus analogues), are attracting increasing interest due to a number of exceptional properties including anisotropic optoelectronics and multiferroicity predicted and in part realized in the ultrathin limit. Due to their enhanced chemical reactivity, both exfoliation and synthesis of monolayer and few-layer crystals pose challenges not found in other 2D/layered materials, such as the transition metal dichalcogenides. In this work, we show that SnS synthesis on SnS 2 van der Waals substrates can address these challenges and consistently produces few-layer flakes, a capability that is explained via analysis of real-time microscopy of the growth process. Raman spectroscopy combined with efficient computations of the Raman-active modes across an extended thickness range enables a comprehensive understanding of the evolution of the vibrational properties of SnS with number of layers. Lateral piezoresponse force microscopy provides unprecedented insight into the stacking-dependent polarization and ferroelectric domain structures in large few-layer SnS flakes. The combined results establish a basis for further fundamental studies and applications of SnS and other group IV monochalcogenides in the few-layer regime.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Topological magnetic hysteresis in single crystals of CeAgSb 2 ferromagnet

Closed-topology magnetic domains are usually observed in thin films and in an applied magnetic field. In this work, we report the observation of rectangular cross-section tubular ferromagnetic domains in thick single crystals of CeAgSb 2 in zero applied field. Relatively low exchange energy, small net magnetic moment, and anisotropic in-plane crystal electric fields lower the domain wall energy and allow for the formation of the closed-topology patterns. The tubular domain structure irreversibly transforms into a dendritic pattern upon cycling the magnetic field. This transition between closed and open topologies results in a ‘topological magnetic hysteresis’— the actual hysteresis in magnetization, not due to the imperfections and pinning, but due to the difference in the pattern morphology. Similar physics was suggested before in pure type-I superconductors and is believed to be a generic feature of other nonlinear single (present case), or two-phase (type-I superconductor) systems where the effects similar to demagnetization (shape-dependent macroscopic variation of properties) lead to pattern formation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

High Magnetic Anisotropy and Magnetocaloric Effects in Single-Crystal Cr 2 Te 3

Here, we report a systematic investigation of anisotropic magnetocaloric effects in single-crystal Cr 2 Te 3 . Single-crystal samples are synthesized by chemical vapor transport and characterized by X-ray and Laue diffraction methods. The maximum magnetic entropy change –ΔS M max is 4.50 J kg –1 K –1 for the easy c-axis (3.36 J kg –1 K –1 for the hard axis along ab-plane), and the relative cooling power (RCP) is 296.7 J kg –1 for the easy c-axis (183.84 J kg –1 for the hard axis along ab-plane) for a magnetic field change of 9 T near the Curie temperature. The magneto-crystalline anisotropy constant K u is estimated to be 580.12 kJ m –3 at 140 K, decreasing to 148.60 kJ m –3 at 168 K. Meanwhile, the maximum of the rotational magnetic entropy change –ΔS M R (T, H) between the c-axis and the ab-plane is about 1.14 J kg –1 K –1 for magnetic-field change of 9 T. The critical exponents are estimated by analyzing magnetocaloric effects, which indicate a 2D-Ising type magnetic system. The accuracy of estimated critical exponents is verified by scaling analysis. The maximum magnetic entropy change –ΔS M max ≈ 5.25 J kg –1 K –1 (along the c-axis) and the corresponding adiabatic temperature change ΔT ad ≈ 3.31 K (along the c-axis) are estimated by analyzing heat capacity measurements with a magnetic field up to 9 T.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Highly Saturated Glassy Liquid Crystal Films Having Nano- and Microscale Thicknesses for High-Power Laser Applications

The optical properties of glassy liquid crystals (GLC’s) designed to provide high resistance to laser-induced damage are explored. GLC’s readily enable freezing of the anisotropic ordering of liquid crystals into the glassy state. This solidity avoids issues of fluid leakage while providing mechanical robustness and the promise of single-substrate coatings or stand-alone films of nanometer to micron thicknesses. A series of three increasingly saturated GLC’s was synthesized and tested for their thin-film (hundreds of nanometers to tens of micrometers) high-peak-power laser-damage resistance with nanosecond pulses at 1053 nm, 532 nm, and 351 nm, as well as their durability under continuous-wave, broadband ultraviolet illumination. As a result, the GLC’s with higher degrees of saturation demonstrated high resistance to laser-induced damage, extending from the near infrared to the ultraviolet spectral region.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Anisotropic time-dependent London approach: Application to the ac response in the Meissner state

The anisotropic London equations taking into account the normal currents are derived and applied to the problem of the surface impedance in the Meissner state of anisotropic materials. It is shown that the complex susceptibility of the anisotropic slab depends on the orientation of the applied microwave field relative to the crystal axes. In particular, the anisotropic sample in the microwave field is subject to a torque, unless the field is directed along one of the crystal principle axes.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Anisotropic neutron response of trans-stilbene and impact on a handheld dual particle imager

Here this manuscript details measurements of the anisotropic light-output response of trans-stilbene, henceforth referred to as stilbene, along the three primary crystal planes and analyzes how this anisotropic response impacts neutron image reconstruction in a handheld dual particle imager (H2DPI). A prototype H2DPI composed of stilbene pillars (6 x 6 x 50 mm 3 ) coupled to silicon photomultipliers was built and is capable of imaging both fast neutrons and gamma rays from kilogram quantities of special nuclear material. Stilbene was chosen as the scintillating medium for the imager because of its pulse shape discrimination capability, time resolution and relatively high light output. A drawback to using stilbene, however, is the anisotropic response. A recoiling proton from a neutron elastic-scattering event in stilbene will yield different amounts of scintillation light depending on the direction of the recoiling proton with respect to the crystal lattice. This manuscript analyzes how this anisotropic response impacts neutron image reconstruction in 4π. The light output in the three primary crystal planes of stilbene were independently measured 6–7 times for proton recoil energies ranging from 0.5–5.0 MeV using a quasi-monoenergetic time-of-flight neutron source. The measured light-output data in the three crystal planes were fit with a semi-empirical function based on Birks’ formula. These fits were used to reconstruct the location of a 252 Cf source in front of the imager (0°, -0.8°), to the left of the imager (-90°, -0.8°) and directly above the imager (0°, 90°) to determine if it is necessary to apply the directionally-dependent response of stilbene to accurately reconstruct source locations. A bootstrapping technique was applied to the measured data sets to produce 1000 images composed of 2000 cone projections for each source location and each measured light-output curve. List-mode maximum likelihood expectation maximization was applied to each image; the highest pixel location and the full width at half maximum (FWHM) were then recorded. The average and standard deviations of these parameters were taken for each set of images. The maximum difference in the average azimuthal pixel location when varying between the appropriate and incorrect light-output curves for the source locations at (0°, -0.8°) and (-90°, -0.8°) were respectively found to be 1.85 ± 1.39° and 2.03 ± 1.78°. All other pixel locations and FWHMs were within a single standard deviation of uncertainty. Taken together, the anisotropic response of stilbene has negligible impact on the neutron image reconstruction capability of the H2DPI.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

High Temperature, Isothermal Growth Promotes Close Packing and Thermal Stability in DNA-Engineered Colloidal Crystals

Here, we report a strategy to accelerate the synthesis and increase the crystallinity of colloidal crystals engineered with DNA. Specifically, by holding the DNA-modified Au particle building blocks above the T m of the individual nanoparticle building blocks, but slightly below the T m of the anticipated colloidal crystal during the assembly process, crystallinity is increased, and enthalpically-favored phases with high degrees of facet registration are observed. We studied the utility of this approach with systems for which the commonly adopted slow-cooling approach yielded primarily amorphous aggregates. In particular, we used it to synthesize high-volume fraction colloidal crystals from large (80 nm) anisotropic nanoparticles (cubes and rhombic dodecahedra) with short (<14 nm) DNA designed to restrict the degrees of freedom for the DNA bonds and maintain the anisotropy of the particle building block. Small-angle X-ray scattering and electron microscopy studies show that the crystalline phases synthesized via this method are more thermally stable than their corresponding aggregate phases, likely due to an increased number of DNA-DNA bonds between particles. Crystal size tunability (between 0.5 and 15 µm edge lengths) and epitaxial growth were demonstrated using this strategy by modulating the NaCl concentration in tandem with previously synthesized colloidal crystal nuclei. Taken together, this isothermal strategy provides a route to deliberately crystallize a wide variety of anisotropic colloidal materials and expands the phase space accessible to nanoparticles modified with DNA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Rotation of Crystal Seed During Early Stages of Growth Reveals the Anisotropy of Glass Matrix

Glass-ceramics are a highly valuable class of materials that are needed for realizing many high-tech as well as consumer products. They are made by controlling crystallization of glass. Theoretical atomistic insights obtained using molecular dynamics simulations in this work reveal that crystal seeds can spontaneously rotate within glass at high temperatures due to anisotropic forces at the glass-crystal interface. This rotation challenges the long‐held view of glass as isotropic solid, and highlights how atomic‐scale inhomogeneities influence crystal growth and microstructure, hence the physical properties glass‐ceramics.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Determining anisotropic slip system rate sensitivities of Ti-6Al-4V using high-energy X-ray diffraction microscopy

Variation of strain rate sensitivity among different families of slip systems in the hexagonal close-packed (α) phase of titanium (Ti) alloys has the potential to alter microscale load redistribution during both creep and dwell fatigue loading. However, existing literature contains conflicting reports regarding the degree of anisotropy present in the strain rate sensitives between α slip system families across Ti alloys. Here, we quantify the strain rate sensitivity of α slip system families in Ti-6Al-4V using high-energy X-ray diffraction microscopy (HEDM). We present a novel procedure in which we utilize the HEDM-measured grain-scale stress states during stress relaxation to determine the strain rate sensitivities of the basal $\langle a \rangle$ , prismatic $\langle a \rangle$, and first-order pyramidal $\langle c + a \rangle$ slip system families. In addition, we measure the strain rate sensitivity exponent of the macroscopic response and the α phase for comparison. We find rate sensitivities for the different slip system families to range from 0.02 to 0.04, which—while varied—are relatively isotropic in comparison with some values presented in the literature. We also demonstrate the effects of the measured anisotropic rate sensitivities using crystal plasticity finite element simulations.

Peterson, Kenneth M. [Pennsylvania State Univ., Un↗
DOE OSTI2020

SO(3)-invariance of informed-graph-based deep neural network for anisotropic elastoplastic materials

This work examines the frame-invariance (and the lack thereof) exhibited in simulated anisotropic elasto-plastic responses generated from supervised machine learning of classical multi-layer and informed-graph-based neural networks, and proposes different remedies to fix this drawback. The inherent hierarchical relations among physical quantities and state variables in an elasto-plasticity model are first represented as informed, directed graphs, where three variations of the graph are tested. While feed-forward neural networks are used to train path-independent constitutive relations (e.g., elasticity), recurrent neural networks are used to replicate responses that depends on the deformation history, i.e. or path dependent. In dealing with the objectivity deficiency, we use the spectral form to represent tensors and, subsequently, three metrics, the Euclidean distance between the Euler Angles, the distance from the identity matrix, and geodesic on the unit sphere in Lie algebra, can be employed to constitute objective functions for the supervised machine learning. In this, the aim is to minimize the measured distance between the true and the predicted 3D rotation entities. Following this, we conduct numerical experiments on how these metrics, which are theoretically equivalent, may lead to differences in the efficiency of the supervised machine learning as well as the accuracy and robustness of the resultant models. Neural network models trained with tensors represented in component form for a given Cartesian coordinate system are used as a benchmark. Our numerical tests show that, even given the same amount of information and data, the quality of the anisotropic elasto-plasticity model is highly sensitive to the way tensors are represented and measured. The results reveal that using a loss function based on geodesic on the unit sphere in Lie algebra together with an informed, directed graph yield significantly more accurate rotation prediction than the other tested approaches.

42 ENGINEERING↗
DOE OSTI2024

Self-Organized Stress Distributions in Polycrystalline Materials [Dissertation]

Understanding stress distributions in solid materials is complicated by the fact that most materials are polycrystalline in nature, with each crystal having an elastically anisotropic reaction to force. This study is to gain a better understanding on how external forces placed on a polycrystal are related to internal reactions within and between the grains. The hypothesis is that the stress distribution in porous to fully dense materials are self-organized based on strong contacts between and within the individual grains created by force chains. Force chains, commonly known in loaded granular materials, and could be the phenomenon that connect micro to macro deformation. Scale bridging measurements conducted through Raman spectroscopy, Atomic Force Microscopy, and Digital Image Correlation will be used to create stress maps, modulus maps, and elastic strain maps across a variety of geological and pharmaceutical polycrystals. When possible, the resulting maps will be compared to current homogenization schemes and a full field models. Finite element modeling will be used to assess whether the patterning seen in the experimental map is a reasonable approximation based on the orientation data of the samples used. A minimum of three publications is projected to be accomplished focusing each on a different method to experimentally test and analyze stress distributions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Topological structure and dynamics of three-dimensional active nematics

Topological structures are effective descriptors of the nonequilibrium dynamics of diverse many-body systems. For example, motile, point-like topological defects capture the salient features of two-dimensional active liquid crystals composed of energy-consuming anisotropic units. We dispersed force-generating microtubule bundles in a passive colloidal liquid crystal to form a three-dimensional active nematic. Light-sheet microscopy revealed the temporal evolution of the millimeter-scale structure of these active nematics with single-bundle resolution. The primary topological excitations are extended, charge-neutral disclination loops that undergo complex dynamics and recombination events. Our work suggests a framework for analyzing the nonequilibrium dynamics of bulk anisotropic systems as diverse as driven complex fluids, active metamaterials, biological tissues, and collections of robots or organisms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

DNA-mediated assembly of Au bipyramids into anisotropic light emitting kagome superlattices

Colloidal crystal engineering with DNA allows one to design diverse superlattices with tunable lattice symmetry, composition, and spacing. Most of these structures follow the complementary contact model, maximizing DNA hybridization on building blocks and producing relatively close-packed lattices. Here, low-symmetry kagome superlattices are assembled from DNA-modified gold bipyramids that can engage only in partial DNA surface matching. The bipyramid dimensions and DNA length can be engineered for two different superlattices with rhombohedral unit cells, including one composed of a periodic stacking of kagome lattices. Enabled by the partial facet alignment, the kagome lattices exhibit lattice distortion, bipyramid twisting, and planar chirality. When conjugated with Cy-5 dyes, the kagome lattices serve as cavities with high-density optical states and large Purcell factors along lateral directions, leading to strong dipole radiation along thezaxis and facet-dependent light emission. Such complex optical properties make these materials attractive for lasers, displays, and quantum sensing constructs.

Science & Technology - Other Topics↗
DOE OSTI2021

Fantastic n = 4: Ce5Co4+xGe13−ySny of the A n +1M n X3 n +1 homologous series

Ce-based intermetallics are of interest due to the potential to study the interplay of localized magnetic moments and conduction electrons. Our work on Ce-based germanides led to the identification of a new homologous series An+1MnX3n+1 (A = rare earth, M = transition metal, X = tetrels, and n = 1–6). This work presents the single-crystal growth, structure determination, and anisotropic magnetic properties of the n = 4 member of the Cen+1ConGe3n+1 homologous series. Ce5Co4+xGe13−ySny consists of three Ce sites, three Co sites, seven Ge sites, and two Sn sites, and the crystal structure is best modeled in the orthorhombic space group Cmmm where a = 4.3031(8) Å, b = 45.608(13) Å, and c = 4.3264(8) Å, which is in close agreement with the previously reported Sn-free analog where a = 4.265(1) Å, b = 45.175(9) Å, and c = 4.293(3) Å. Anisotropic magnetic measurements show Kondo-like behavior and three magnetic transitions at 6, 4.9, and 2.4 K for Ce5Co4+xGe13−ySny.

Weiland, Ashley (ORCID:0000000171983559)↗
DOE OSTI2025

Distinguishing isotropic and anisotropic signals for X-ray total scattering using machine learning

Understanding structure–property relationships is essential for advancing technologies based on thin films. X-ray pair distribution function (PDF) analysis can access relevant atomic structure details spanning local-, mid- and long-range structure. While X-ray PDF has been adapted for thin films on amorphous substrates, measurements on single-crystal substrates are necessary to accurately determine structure origins for some thin film materials, especially those for which the substrate changes the accessible structure and properties. However, when measuring films on single-crystal substrates, high-intensity anisotropic Bragg spots saturate 2D detector images, overshadowing the thin films' isotropic scattering signal. This renders previous data processing methods for films on amorphous substrates unsuitable for films on single-crystal substrates. To address this measurement need, we developed IsoDAT2D, an innovative data processing approach using unsupervised machine learning algorithms. The program combines dimensionality reduction and clustering algorithms to separate thin film and single-crystal substrate X-ray scattering signals. We use SimDAT2D , a program we developed to generate simulated thin film data, to validate IsoDAT2D . Here we also use IsoDAT2D to isolate X-ray total scattering signal from a thin film on a single-crystal substrate. The resulting PDF data are compared with similar data processed using previous methods, especially substrate subtraction for single-crystal and amorphous substrates. PDF data from IsoDAT2D -identified X-ray total scattering data are significantly better than from single-crystal substrate subtraction, but not as reliable as PDF data from amorphous substrate subtraction. With IsoDAT2D , there are new opportunities to expand PDF to a wider variety of thin films, including those on single-crystal substrates, with which new structure–property relationships can be elucidated to enable fundamental understanding and technological advances.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Synchrotron Microbeam Diffraction Studies on the Alignment within 3D-Printed Smectic-A Liquid Crystal Elastomer Filaments during Extrusion

3D printing of novel and smart materials has received considerable attention due to its applications within biological and medical fields, mostly as they can be used to print complex architectures and particular designs. However, the internal structure during 3D printing can be problematic to resolve. We present here how time-resolved synchrotron microbeam Small-Angle X-ray Diffraction (μ-SAXD) allows us to elucidate the local orientational structure of a liquid crystal elastomer-based printed scaffold. Most reported 3D-printed liquid crystal elastomers are mainly nematic; here, we present a Smectic-A 3D-printed liquid crystal elastomer that has previously been reported to promote cell proliferation and alignment. The data obtained on the 3D-printed filaments will provide insights into the internal structure of the liquid crystal elastomer for the future fabrication of liquid crystal elastomers as responsive and anisotropic 3D cell scaffolds.

36 MATERIALS SCIENCE↗