SEARCH · Search NASA

Results for “aqueous solvent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Thermal sensing for characterizing the contents of waste storage drums

The present investigation is concerned with the feasibility to employ remote sensing for the characterization of the contents of liquid chemical waste storage drums. Philipson et al. (1981) had found that, when the air temperature is changing rapidly, differences in the thermal inertia of the drum contents can lead to detectable differences in the skin temperature of the drums. Thus, postsunset, airborne thermal remote sensing could potentially provide some level of discrimination among chemical storage drums. Discrimination should be possible among steel drums filled largely with: (1) aqueous solvents, (2) organic solvents, or (3) clay packing materials. The response of a drum filled with clay packing materials should be similar to that of an empty drum. The reported study had the objective to verify the theoretical findings, taking into account the use of a hand-held infrared radiometer. It was found that under the proper conditions the temperature differences among drums with the three different types of contents will be significant and consistent.

Philpot, W. D.↗

NASA NTRS1985

Corrosion of metals by hydrazine

The mechanism of corrosion of metals by hydrazine has been studied by means of coupons in sealed ampoules and by electrochemical techniques. The variables considered were temperature, CO2 impurity level, alloy composition and microcrystalline structure. The coupon studies, to date, verify that increasng temperature and the presence of CO2 does increase the corrosion rate as expected. The presence of molybdenum in stainless steels to the 3 percent level is not necessarily deleterious, contrary to published reports. The influence of microcrystalline structure and surface characteristics are more dominant effects. However, with Ti-6Al-4V, two different microcrystalline structures showed no significant differences. Corrosion rates of CRES 304 L in hydrazine have also been measured by several electrochemical techniques such as Tafel plots, polarization resistance and A. C. Impedance. This is the first documented work to show that A. C. Impedance can be used with non-aqueous solvents. Preliminary data correlated satisfactorily with the results of the coupon studies.

Lawton, E. A.↗

NASA NTRS1993

Structure and energetics of model amphiphilic molecules at the water liquid-vapor interface - A molecular dynamics study

A molecular dynamics study of adsorption of p-n-pentylphenol at infinite dilution at the water liquid-vapor interface is reported. The calculated free energy of adsorption is -8.8 +/- 0.7 kcal/mol, in good agreement with the experimental value of -7.3 kcal/mol. The transition between the interfacial region and the bulk solution is sharp and well-defined by energetic, conformational, and orientational criteria. At the water surface, the phenol head group is mostly immersed in aqueous solvent. The most frequent orientation of the hydrocarbon tail is parallel to the interface, due to dispersion interactions with the water surface. This arrangement of the phenol ring and the alkyl chain requires that the chain exhibits a kink. As the polar head group is being moved into the solvent, the chain length increases and the tail becomes increasingly aligned toward the surface normal, such that the nonpolar part of the molecule exposed to water is minimized. The same effect was achieved when phenol was replaced by a more polar head group, phenolate.

Pohorille, Andrew↗

NASA NTRS2008

Increasing Discharge Capacities of Li-(CF)(sub n) Cells

An electrolyte additive has shown promise as a means of increasing the sustainable rates of discharge and, hence, the discharge capacities, of lithiumpoly(carbon monofluoride) electrochemical power cells. Lithium-poly(carbon monofluoride) [Li-(CF)n] cells and batteries offer very high specific energies practical values of about 600 W.h/g and a theoretical maximum value of 2,180 W.h/kg. However, because Li-(CF)n cells and batteries cannot withstand discharge at high rates, they have been relegated to niche applications that involve very low discharge currents over times of the order of hundreds to thousands of hours. Increasing the discharge capacities of Li- (CF)n batteries while maintaining high practical levels of specific energy would open new applications for these batteries. During the discharge of a Li-(CF)n cell, one of the electrochemical reactions causes LiF to precipitate at the cathode. LiF is almost completely insoluble in most non-aqueous solvents, including those used in the electrolyte solutions of Li-(CF)n cells. LiF is electrochemically inactive and can block the desired transport of ions at the cathode, and, hence, the precipitation of LiF can form an ever-thickening film on the cathode that limits the rate of discharge.

Whitacre, Jay↗

NASA NTRS2010

Depositing nanometer-sized particles of metals onto carbon allotropes

A process for depositing nanometer-sized metal particles onto a substrate in the absence of aqueous solvents, organic solvents, and reducing agents, and without any required pre-treatment of the substrate, includes preparing an admixture of a metal compound and a substrate by dry mixing a chosen amount of the metal compound with a chosen amount of the substrate; and supplying energy to the admixture in an amount sufficient to deposit zero valance metal particles onto the substrate. This process gives rise to a number of deposited metallic particle sizes which may be controlled. The compositions prepared by this process are used to produce polymer composites by combining them with readily available commodity and engineering plastics. The polymer composites are used as coatings, or they are used to fabricate articles, such as free-standing films, fibers, fabrics, foams, molded and laminated articles, tubes, adhesives, and fiber reinforced articles. These articles are well-suited for many applications requiring thermal conductivity, electrical conductivity, antibacterial activity, catalytic activity, and combinations thereof.

Watson, Kent A.↗

NASA NTRS2020

ExCALiBR: An Instrument for Uncovering the Origin of the Moonâ€™s Organics.

Lipids are organic molecules of great astrobiological interest for future NASA missions to the Moon, Mars and Icy Worlds. Lipids are essential for life as we know it, and likely also required for putative extraterrestrial organisms. These robust organics can be synthesized abiotically and survive for long periods of geological time. Laboratory characterization techniques are well established but are laborious, operator dependent, and require large volumes of consumables, precluding in situ analysis. We are developing an autonomous, miniaturized fluidic system, integrating lab techniques for lipid analysis while minimizing rea-gent volumes and concentrating organics for analysis, thereby increasing signal-to-noise ratios by orders of magnitude. This system, the Extractor for Chemical Analysis of Lipid Biomarkers in Regolith (ExCALiBR), will enable future organic surveys by extracting and concentrating lipids from approximately 50 grams of regolith using a fluidic and microfluidic sample processor made of materials compatible with non-aqueous solvents required for extraction. ExCAL-iBR can be deployed on a lander or used on a crewed mission.

M B Wilhelm↗

DOE OSTI2020

High voltage window electrolyte for supercapacitors

A supercapacitor according to the present invention includes a negative carbon-comprising electrode which does not intercalate sodium, and a positive carbon-comprising electrode. An electrolyte composition comprises sodium hexafluorophosphate and a non-aqueous solvent comprising at least one selected from the group consisting of ethylene glycol dimethyl ether, diethylene glycol dimethyl ether, triethylene glycol dimethyl ether, and tetraethylene glycol dimethyl ether. The supercapacitor has an electrochemical voltage window of from +0.0 V to 3.5 V (full cell voltage). The electrolyte has an electrochemical voltage window of from +0.05 V to 3.9 V vs. Na/Na+. A method of making and a method of operating a supercapacitor is also disclosed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Functional organic salt for lithium-ion batteries

An electrolyte for a lithium-ion electrochemical cell comprises a non-aqueous solution of a lithium salt and a redox shuttle salt compound in a non-aqueous solvent, wherein the redox shuttle compound comprises an amino-substituted cyclopropenium salt of Formula (I) as described herein.

25 ENERGY STORAGE↗

DOE OSTI2020

High voltage window electrolyte for supercapacitors

25 ENERGY STORAGE↗

DOE OSTI2020

Lithium-sulfur battery with lithium polysulfide catholyte

A liquid catholyte for a Li-S battery comprises a non-aqueous solution of at least one lithium polysulfide of formula Li 2 S x (wherein x is selected from 4, 6, and 8) and an anion receptor compound capable of complexing with polysulfide anion. The non-aqueous solution typically is composed of the Li 2 S x and the anion receptor compound dissolved in a non-aqueous solvent (e.g., one or more organic ether or fluorinated ether solvents). The anion receptor compound typically is present in the catholyte at a concentration of about 0.1 M to about 4 M. Li-S batteries comprise a metallic lithium anode; a porous conductive substrate; a separator membrane between the anode and the porous conductive substrate; and the liquid catholyte composition within pores of the substrate.

25 ENERGY STORAGE↗

DOE OSTI2020

Additives for high voltage lithium ion batteries

This invention relates to a method for preparing an electrochemical cell comprising the sequential steps of preparing a solution of a lithium salt in an non-aqueous solvent containing an additive compound, and maintaining the solution at a temperature in the range of about 20 to about 30° C. for about 5 to 10 days to form an aged electrolyte; assembling an electrochemical cell from an anode, a cathode, and the aged electrolyte; and electrochemically subjecting the electrochemical cell to formation cycling. The additive compound comprises one or more compounds selected from the group consisting of: (R3SiO)3B, (R3SiO)3XY, (R3SiO)3P, (R′O)3PO, (R3Si)3X′, R3SiOS(O)2R′; (R3Si)OC(═O)R′; wherein each R and R′ independently is a hydrocarbyl group; X is P or B; Y is O or S; X is Ti or Al. Electrochemical cells and batteries also are described.

Peebles, Cameron↗

DOE OSTI2021

Non-aqueous electrolytes for electrochemical cells

A non-aqueous electrolyte comprising a salt, a non-aqueous solvent, and a compound of Formula (I), (II), or (III), where E is —S(O)— or S(O)2—:

Su, Chi Cheung↗

DOE OSTI2022

Compositions and methods for carbon dioxide capture

An aqueous solvent composition is provided, comprising a nucleophilic component having one or more sterically unhindered primary or secondary amine moieties, a Brønsted base component having one or more basic nitrogen moieties, a water-soluble organic solvent, and water. A biphasic composition is provided, comprising one or more carbamate compounds, one or more conjugate acids of Brønsted base, a water-soluble organic solvent, and water. A biphasic CO2 absorption process is also provided, utilizing the biphasic solvent composition.

Lu, Yongqi↗

DOE OSTI2023

Additives for high voltage lithium ion batteries

This invention relates to an electrolyte composition for a lithium ion battery comprising a lithium salt in a non-aqueous solvent containing an additive comprising a compound of formula R 3 SiOP(O) n F 2 ; wherein each R independently is a hydrocarbyl group; and n is 0 or 1; and wherein the additive is substantially free from (R 3 SiO) 3 P(O) n and (R 3 SiO) 2 P(O) n F. Electrochemical cells and batteries also are described.

Peebles, Cameron↗

DOE OSTI2023

Methods of recovering an elemental rare earth metal, and methods of forming a rare earth metal

A method of recovering an elemental rare earth metal comprises placing a rare earth-containing material comprising a rare earth metal in a reaction solution comprising a reducing agent and a non-aqueous solvent comprising an ionic liquid or a eutectic mixture, reducing the rare earth metal with the reducing agent to form a metallic rare earth metal and cations of the reducing agent, transferring the cations of the reducing agent from the reaction solution to an electrochemical cell through an ion exchange membrane, and reducing the cations of the reducing agent in the electrochemical cell. Related methods of forming an elemental rare earth metal, and related systems are disclosed.

Case, Mary E.↗

DOE OSTI2020

New Insights into the Charge-Transfer-to-Solvent Spectrum of Aqueous Iodide: Surface versus Bulk

Liquid phase charge-transfer-to-solvent (CTTS) transitions are important, as they serve as photochemical routes to solvated electrons. Here in this work, broadband deep-ultraviolet electronic sum frequency generation (DUV-ESFG) and two-photon absorption (2PA) spectroscopic techniques were used to assign and compare the nature of the aqueous iodide CTTS excitations at the air/water interface and in bulk solution. In the one-photon absorption (1PA) spectrum, excitation to the 6s Rydberg-like orbital (5p → 6s) gives rise to a pair of spin–orbit split iodine states, 2 P 3/2 and 2 P 1/2 . In the 2PA spectra, the lower-energy 2 P 3/2 peak is absent and the observed 2PA peak, which is ~0.14 eV blue-shifted relative to the upper 2 P 1/2 CTTS peak seen in 1PA, arises from 5p → 6p electronic promotion. The band observed in the ESFG spectrum is attributed to mixing of excited states involving 5p → 6p and 5p → 6s promotions caused by both vibronic coupling and the external electric field generated by asymmetric interfacial solvation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Birth of the Hydrated Electron via Charge-Transfer-to-Solvent Excitation of Aqueous Iodide

A primary means to generate hydrated electrons in laboratory experiments is excitation to the charge-transfer-to-solvent (CTTS) state of a solute such as I – (aq), but this initial step in the genesis of e – (aq) has never been simulated directly using ab initio molecular dynamics. Here, we report the first such simulations, combining ground- and excited-state simulations of I – (aq) with a detailed analysis of fluctuations in the Coulomb potential experienced by the nascent solvated electron. What emerges is a two-step picture of the evolution of e – (aq) starting from the CTTS state: I – (aq) + hν → I –* (aq) → I • (aq) + e – (aq). Notably, the equilibrated ground state of e – (aq) evolves from I –* (aq) without any nonadiabatic transitions, simply as a result of solvent reorganization. The methodology used here should be applicable to other photochemical electron transfer processes in solution, an important class of problems directly relevant to photocatalysis and energy transfer.

Carter-Fenk, Kevin↗

DOE OSTI2025

Thermodynamic Water Activity Explains the Unusual Electrochemical Stability of Aqueous Deep Eutectic Solvents

The presence of water in nonaqueous deep eutectic solvent (DES) electrolytes has been debated in recent years, with efforts ranging from its complete removal to willful addition. It was shown that controlled amounts of water can be beneficial, as it not only enhances the physicochemical properties of these electrolytes but also has no significant detrimental effects on their electrochemical stability. Despite these advantages, there is still limited understanding of how water interacts with DES systems at the molecular level. This study examines the water activity in ethylene glycol and glycerol, as well as their binary mixtures with choline chloride to form the DESs ethaline and glyceline, respectively. In this work, we show that the high electrochemical stability of glyceline is related to its lower water activity compared to ethaline and can be attributed to the robust H-bonding network formed by the three hydroxyl groups of glycerol. Its 3D H-bond network effectively integrates water molecules within its solvent structure, reducing degradation and maintaining stability at higher water contents. The deviations from the ideal Raoult's law behavior are reflected in the water activity and activity coefficients, which highlight the intricate H-bond interactions within DES-water mixtures. Water acts like a lubricant within the more viscous DES mixtures without being detrimental to their electrochemical performance. The presented results emphasize the necessity of customizing DES-water compositions to enhance their performance as electrolytes, especially in flow battery applications where electrochemical stability, ionic conductivity, and fluidity are of utmost importance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗