Search NASA⌕ Search

SEARCH · Search NASA

Results for “area selective deposition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

AmeriFlux US-xMB NEON Moab (MOAB)

This is the AmeriFlux version of the carbon flux data for the site US-xMB NEON Moab (MOAB). Site Description - The NEON MOAB site is located approximately 40 km south of the town of Moab and is characteristic of the Colorado Plateau. MOAB was selected with other sites that share a similar latitude in domains 10, 13, and 15, to assess dust generation, nutrient transport, and nutrient deposition. The western half of the site, including the tower airshed, is a grazed shrub land, often with pockets of barren soil. To the east, in the higher elevations, evergreen forests sit atop the mesas. Biological soil crust, dominated by cyanobacteria, is a living groundcover across the area.

Network), NEON (National Ecological Observatory↗
DOE OSTI2023

AmeriFlux FLUXNET-1F US-xMB NEON Moab (MOAB)

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-xMB NEON Moab (MOAB). This is the FLUXNET version of the carbon flux data for the site US-xMB NEON Moab (MOAB) produced by applying the standard ONEFlux (1F) software. Site Description - The NEON MOAB site is located approximately 40 km south of the town of Moab and is characteristic of the Colorado Plateau. MOAB was selected with other sites that share a similar latitude in domains 10, 13, and 15, to assess dust generation, nutrient transport, and nutrient deposition. The western half of the site, including the tower airshed, is a grazed shrub land, often with pockets of barren soil. To the east, in the higher elevations, evergreen forests sit atop the mesas. Biological soil crust, dominated by cyanobacteria, is a living groundcover across the area.

Network), NEON (National Ecological Observatory↗
DOE OSTI2022

Structural and optical properties of cubic GaN on U-grooved Si (100)

Cubic GaN epitaxy on large-area U-grooved silicon (100) dies is demonstrated by metalorganic chemical vapor deposition, and its structural and optical properties are reported. Scanning electron, atomic force, and transmission electron microscopy studies reveal that cubic GaN shows no discernible threading dislocations and a low stacking fault density of 3.27 ± 0.18 × 10 4 cm –1 . Temperature-dependent photoluminescence studies reveal as-grown cubic GaN band edge emission internal quantum efficiency as 25.6% ± 0.9%. Selective etching of the low-temperature AlN buffer layer, SiO 2 sidewalls, and hexagonal-phase GaN is demonstrated, which increases the cubic GaN band edge emission internal quantum efficiency to 31.6% ± 0.8%. This increase is attributed to the decrease in the radiative recombination lifetime via the removal of defective hexagonal-phase GaN. Altogether, cubic GaN on U-grooved silicon with high structural and optical quality is reported, promising its suitability for next-generation devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effect of Surface Temperature on the Distribution and Reactivity of Rh Active Sites for CO Oxidation

Single–atom catalysts are a fast–emerging area in which late–transition metal atoms are supported on oxides, metals, and carbonaceous supports. They show great promise for selective chemical reactions due to their well–defined active sites, and significantly reduce precious metal loading. However, oxide–supported single–atom catalysts have drawbacks such as deactivation due to sintering, and there are on–going debates about the exact nature of the active sites. Herein we report a model system where the surface temperature during Rh deposition on a copper oxide support dictates the Rh size distribution. Here our temperature–programmed desorption experiments reveal that Rh clusters perform CO oxidation at lower temperature than single atoms, and isotopic labelling demonstrates differences in the mechanism in that the C–O bond is broken and reformed on clusters, as opposed to a pure Mars van Krevelen mechanism for CO oxidation at the single–atom Rh sites. We further examine the cluster size distributions with scanning tunneling microscopy and X–ray photoelectron spectroscopy which confirm the presence of both clusters and single atoms for the lower temperature deposition and only single atoms for the higher temperature deposition. Together, these results provide a fundamental understanding of the differences in the CO oxidation mechanism on Rh atoms and clusters.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Microanalytical Approaches to Characterizing REE in Appalachian Basin Underclays

The search for a reliable U.S. domestic source of rare earth elements (REE) is necessary to support the demand of advanced energy applications (e.g., catalysts, electronics, magnets). Sedimentary deposits may be sources for selectively recovering REE and critical metals—specifically the interbedded seat rock, or underclay, that underlies or forms the floor of a coal seam. This material is often a major component of coal waste fines and refuse and thus readily available. This study examines several Appalachian Basin underclays associated with actively mined coal seams as potential feedstocks for the REE. Multimodal microanalytical electron microscopy (SEM, FIB-SEM, EMPA) synchrotron-based µXRF, and image processing techniques are coupled with detailed elemental and mineral data to classify the 2D and 3D petrophysical properties of the materials. The REE contents of Appalachian Basin underclays were measured from 235–399 ppm and predominantly observed as discrete REE-bearing minerals such as monazite and xenotime on the order of 10–100 µm in size. These REE-bearing minerals typically accounted for less than 1% of the scanned areas and volumes under SEM and FIB-SEM analysis, with the exception of regions enriched in crandallite. Synchrotron-based µXRF elemental maps further identified several REE deposition environments in different underclays, including micro-scale (10–100 µm) light REEs co-localizing with Ca and P, micro-scale heavy REEs with Fe, and large-scale light REEs (>200 µm) co-localizing with Sr, Ba, Ca and P.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Advances in Carbon Electrode Integration for Stable and Efficient Perovskite Solar Cells and Modules

Carbon-electrode-based perovskite solar cells (C-PSCs) have emerged as a cost-effective and scalable alternative to noble-metal-based PSCs, addressing critical challenges related to device stability, fabrication complexity, and commercialization potential. This review explores the recent progress in C-PSC development, focusing on the benefits of carbon electrodes (CEs), including their hydrophobicity, chemical inertness to halide corrosion, and compatibility with low-temperature cost-effective solution-based deposition methods. Despite relatively lower power conversion efficiencies (PCEs) than their metal (e.g., Au/Ag) counterparts, recent advances in carbon paste formulation, interfacial contact engineering, and work function modification have elevated C-PSC efficiencies above 22%. This review further examines strategies to enhance electrode conductivity, interfacial properties, and charge selectivity to further increase C-PSC performance. Progress in carbon-electrode-based perovskite solar modules (C-PSMs), particularly within mesoporous and planar architectures, is also analyzed, revealing significant developments in active area scaling and long-term stability. Notably, the limited research in inverted (PIN) C-PSCs is also highlighted as a compelling opportunity for innovation, given the architecture's inherent advantages in flexibility, tandem integration, and low-temperature processing. Collectively, these insights affirm the potential of C-PSCs and C-PSMs to deliver affordable, stable, and high-performance photovoltaics suitable for scalable deployment.

Carbon Electrodes↗
DOE OSTI2024

Snowflake relocated Cu 2 O electrocatalyst on an Ag backbone template for the production of liquid C 2+ chemicals from CO 2

In this study, we performed the CO 2 reduction reaction (CO 2 RR) using a structural composite catalyst of cuprous oxide (Cu 2 O) and silver (Ag) that was simultaneously electrodeposited. While the underneath Ag electrodeposits maintained their spiky backbone structures even after the CO 2 RR, the Cu 2 O deposits were reduced to Cu(111) and relocated on the backbone template. Here, the structural changes in Cu 2 O to Cu increase the active area of the Cu–Ag interface, resulting in a remarkable production rate of 125.01 μmol h -1 of liquid C 2+ chemicals via the stabilization of the C–C coupling of the key intermediate species of acetaldehyde. This study provides new insights into designing a bimetallic catalyst for producing sustainable C 2+ products from CO 2 without any selectivity towards the production of methane.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Development of APCVD BSG and POCl 3 Codiffusion Process for Double-Side TOPCon Solar Cell Precursor Fabrication

This paper presents a commercially viable process for fabricating a high-quality double-side tunnel oxide passivating contact (DS-TOPCon) cell precursor using APCVD-deposited boron silicate glass and ex-situ POCl 3 diffusion in a single high-temperature step, eliminating the need for additional masking and diffusion processes. A two-tier temperature profile was developed, involving a pre-annealing at above 900°C in nitrogen (N2) ambient followed by POCl 3 diffusion at 840°C. We investigated the effect of varying pre-annealing temperatures, ranging from 875°C to 950°C, on the passivation quality and metal-Si contact properties of both n-TOPCon and p-TOPCon layers. The resultant DS-TOPCon cell precursor after silicon nitride (SiNX) passivation exhibited an excellent iV OC of close to 730 mV. In addition, a rapid asymmetric poly-Si thinning technique, developed in this work, enabled adjustment of the front n + poly-Si thickness while maintaining the rear p + poly-Si thickness. Two types of DS-TOPCon cell architectures can be fabricated: i) full-area thin (≈40nm) n-TOPCon layer on the front and ii) selective-area thick (≈200nm) n-TOPCon fingers underneath the metal grid. Device simulations suggest that full-area DS-TOPCon cell with 40 nm n + poly-Si and selective-area DS-TOPCon cell with 200 nm n + poly fingers on the front, fabricated from our current DS-TOPCon cell precursor, can achieve cell efficiencies of 22.1 and 23.5%, respectively. Detailed power loss analysis and device simulation reveal that further improvements in material and device parameters have potential to push the cell efficiencies of DS-TOPCon cell structure beyond 25%, making it a promising alternative to fabricate a high-efficiency next-generation solar cells at low cost.

14 SOLAR ENERGY↗
DOE OSTI2024

Catalytic, Spectroscopic, and Theoretical Studies of Fe 4 S 4 -Based Coordination Polymers as Heterogenous Coupled Proton–Electron Transfer Mediators for Electrocatalysis

Iron–sulfur clusters play essential roles in biological systems, and thus synthetic [Fe 4 S 4 ] clusters have been an area of active research. Recent studies have demonstrated that soluble [Fe 4 S 4 ] clusters can serve as net H atom transfer mediators, improving the activity and selectivity of a homogeneous Mn CO 2 reduction catalyst. Here, in this work, we demonstrate that incorporating these [Fe 4 S 4 ] clusters into a coordination polymer enables heterogeneous H atom transfer from an electrode surface to a Mn complex dissolved in solution. A previously reported solution-processable Fe 4 S 4 -based coordination polymer was successfully deposited on the surfaces of different electrodes. The coated electrodes serve as H atom transfer mediators to a soluble Mn CO 2 reduction catalyst displaying good product selectivity for formic acid. Furthermore, these electrodes are recyclable with a minimal decrease in activity after multiple catalytic cycles. The heterogenization of the mediator also enables the characterization of solution-phase and electrode surface species separately. Surface enhanced infrared absorption spectroscopy (SEIRAS) reveals spectroscopic signatures for an in situ generated active Mn–H species, providing a more complete mechanistic picture for this system. The active species, reaction mechanism, and the protonation sites on the [Fe 4 S 4 ] clusters were further confirmed by density functional theory calculations. The observed H atom transfer reactivity of these coordination polymer-coated electrodes motivates additional applications of this composite material in reductive H atom transfer electrocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

How machine learning can help select capping layers to suppress perovskite degradation

Environmental stability of perovskite solar cells (PSCs) has been improved by trial-and-error exploration of thin low-dimensional (LD) perovskite deposited on top of the perovskite absorber, called the capping layer. In this study, a machine-learning framework is presented to optimize this layer. We featurize 21 organic halide salts, apply them as capping layers onto methylammonium lead iodide (MAPbI 3 ) films, age them under accelerated conditions, and determine features governing stability using supervised machine learning and Shapley values. We find that organic molecules’ low number of hydrogen-bonding donors and small topological polar surface area correlate with increased MAPbI 3 film stability. The top performing organic halide, phenyltriethylammonium iodide (PTEAI), successfully extends the MAPbI3 stability lifetime by 4 ± 2 times over bare MAPbI 3 and 1.3 ± 0.3 times over state-of-the-art octylammonium bromide (OABr). Through characterization, we find that this capping layer stabilizes the photoactive layer by changing the surface chemistry and suppressing methylammonium loss.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Nanoscale friction of CVD single-layer MoS 2 with controlled defect formation

Two-dimensional (2D) layered nanomaterials such as graphene, molybdenum disulfide (MoS 2 ), or tungsten disulfide offer a promising solution in areas of solid-state lubrication, due to their excellent mechanical properties as well as low friction. However, defects can influence their friction and reduce their superior tribological properties. Thus, it is crucial to understand the effects of defects on sliding behavior in 2D nanomaterials, to foster a functional strategy for utilizing 2D nanomaterials as solid-state tribological films. In this study, frictional effects of defects, grain boundaries, and atomic-scale structural defects were explored on chemical vapor deposition (CVD) grown single layer MoS 2 . Selective patterning of defects into MoS 2 was accomplished via controlled irradiation of helium ions with varying ion doses. The friction of MoS 2 was characterized by friction force microscopy (FFM) and was found that friction depends on the defect formation controlled by helium ion irradiation. This approach offers a correlation between surface topography, defects and friction. Understanding the relative friction of MoS 2 in the presence of different levels of defects is foundational to studying tribological properties of a single layer MoS 2 at both nanoscales and macroscales.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Nitride or Oxynitride? Elucidating the Composition–Activity Relationships in Molybdenum Nitride Electrocatalysts for the Oxygen Reduction Reaction

Molybdenum nitride (Mo–N) catalysts have shown promising activity and stability for the oxygen reduction reaction (ORR) in acid. However, the effect of oxygen (O) incorporation (from synthesis, catalysis, or exposure to air) on their activity remains elusive. Here, we use reactive sputtering to synthesize three compositions of thin-film catalysts and use extensive materials characterization to investigate the depth-dependent structure and incorporated O. We show that the as-deposited Mo–N films are highly oxidized both at the surface (>30% O) and in the bulk (3–21% O) and that the ORR performance is strongly correlated with the bulk structure and composition. Activity for 4e– ORR is highest for compositions with the highest N/O and N/Mo ratio. Furthermore, H 2 O 2 production for the films with moderate O content is comparable to or higher than the most H 2 O 2 -selective nonprecious metal catalysts in acidic electrolyte, on a moles per mass or surface area of catalyst basis. Density functional theory provides insight into the energetics of O incorporation and vacancy formation, and we hypothesize that activity trends with O/N ratios can be traced to the varying crystallite phases and their interactions with ORR adsorbates. This work demonstrates the prevalence and significance of O in metal nitride electrocatalysts and motivates further investigation into the role of O in other nonprecious metal materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

UHT-CAMANCHE: Ultra-High Temperature Ceramic Additively Manufactured Compact Heat Exchangers

The conceptual basis for this project is the convergence of advanced ultra-high temperature ceramic materials and additive manufacturing technologies to produce compact ceramic heat exchangers with complex internal flow path geometries. Task areas were broadly divided into materials and manufacturing development, heat exchanger design, component testing, and techno-economic analysis. Technical challenges included the design and commissioning of new test facilities, improving feature resolution and deposition rate of ceramic additive manufacturing techniques, establishing process-structure-property relationships in additively manufactured ultra-high temperature ceramics, and assessing high temperature materials compatibility in CO 2 environments. The primary candidate material evaluated in this work is a composite comprising zirconium diboride (ZrB2) with 30 vol. % silicon carbide (SiC) which was selected based on its desirable combination of high temperature mechanical properties, high thermal and electrical conductivities, and oxidation resistance. High solids loaded ZrB2-SiC pastes suitable for extrusion-based additive manufacturing were developed for the first time as part of this work. Materials compatibility studies indicate this material oxidizes in CO 2 to form a protective borosilicate scale which transforms to pure silica above 1000°C. Parts made by additive manufacturing displayed enlarged grain sizes produced by pressureless sintering as compared to hot-press sintering. Increases in microstructural coarseness have outsized effect on oxidation performance up to 1400°C due to incomplete oxidation of coarse large diameter SiC particles resulting in lower amounts of silica that apparently inhibit protective scale formation. Additive manufacturing as a forming technique did not appear to significantly affect thermal conductivity, hardness, or elastic modulus, though flexural strength was reduced by half or more as compared to traditionally hot-pressed materials. This effect was attributed to the presence of strength-limiting flaws (ca. 40 microns in size) originating from extrudate inhomogeneities that could potentially be eliminated with further process improvements. Attempts to attain economies of scale for production of multi-kilowatt scale heat exchangers by ceramic additive manufacturing proved difficult. Lack of automation and a modest extrusion rate while retaining fine feature resolution made the overall process labor intensive and limited experimental throughput. A number of full-scale components were taken through post-process heat treatments including drying, binder burnout, and sintering; however, none survived without significant flaws or cracks. Therefore, no operational data from a newly installed heat exchanger test loop were able to be obtained during the performance period. Continued research and development is recommended to improve economic feasibility of ceramic additive manufacturing by standardizing the use of advanced sensors, artificial intelligence, and automation tools to reduce associated labor costs and accelerate production rates. The materials and manufacturing techniques demonstrated in this work are likely to find applications in defense and energy applications.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Bidentate N‐based Ligands for Highly Reusable, Ligand‐coordinated, Supported Pt Hydrosilylation Catalysts

Abstract A significant challenge in designing supported metal‐ligand catalysts for solution‐phase reactions is the stabilization of the metal active sites against leaching into solution. Here, we examine alkene hydrosilylation reactions as model systems to improve the stability of highly dispersed Pt using a metal‐ligand coordination strategy on high surface area oxide supports. By evaluating a series of bidentate N‐based ligands, we demonstrate several design strategies to improve stability of the highly dispersed Pt 2+ centers against leaching, while maintaining a high level of catalytic activity, selectivity, and recyclability for alkene hydrosilylation batch reactions under mild conditions. These involve a bi‐functional approach to ligand design, which considers interaction to the support and a well‐defined coordination environment for the metal active site. Three strategies are reported: modifying ligands for stronger interaction with oxide surfaces, mixing ligands, and pre‐depositing an “anchoring ligand” to the support before loading the metal‐ligand catalyst. Each of these is successful in enhancing Pt recyclability. Particularly, two Pt‐phenanthroline catalysts exhibit excellent reusability for multiple batch reaction cycles, due to high stability of the active Pt species. Addressing the active site leaching problem significantly enhances the utility of ligand‐coordinated supported metal catalysts as highly stable and selective catalysts for solution‐phase reactions.

Chen, Linxiao↗
DOE OSTI2022

Super-porous Pt/CuO/Pt hybrid platform for ultra-sensitive and selective H 2 O 2 detection

A super-porous Pt/CuO/Pt hybrid electrode is demonstrated with extremely high sensing performance parameters for the hydrogen peroxide (H 2 O 2 ) detection. A unique physiochemical approach is adapted for the fabrication of 3-D super-porous Pt/CuO/Pt sensing platform. Here, the super-porous Pt/CuO/Pt hybrid platform demonstrates a superior sensitivity of 16,694 µA mM -1 cm -2 with a limit of detection of 2.91 nM (S/N = 3). It also demonstrates an excellent selectivity against the interfering molecules such as NaCl, fructose, ascorbic acid, citric acid, dopamine and glucose with a wide linear range. The demonstrated performance ranks the Pt/CuO/Pt hybrid platform as one of the best H 2 O 2 sensors as summarized in the Table 2. The super-porous CuO layer is fabricated by a dynamic hydrogen bubbling technique of electrochemical deposition and metallic Pt NP decoration is achieved by the physical vapor deposition (PVD) and post-annealing. The super-porous CuO layer offers a drastically improved electrochemical active surface area, and the Pt NP decoration offers a significantly improved conductivity and improved charge accumulation for the H 2 O 2 reduction. The DFT simulations confirm the predominance of CuO over Cu 2 O and Pt over Pd for the H 2 O 2 detection based on the adsorption energy, density of states and charge accumulation calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Fabrication of porous transport electrodes: Development of quantitative approach for quality control

This work focuses on porous transport electrodes (PTEs), which integrate the anodic catalyst with the adjacent Ti porous transport layer (PTL). Challenges in catalyst deposition on PTLs, particularly at low loadings, motivated this study to evaluate various fabrication methods and characterization approaches. This work investigated Pt-treated PTLs coated with Ir-based catalysts using several common methods, including airbrush coating, rod coating, ultrasonic spray coating, electrodeposition, and sputter deposition, with catalyst loadings ranging from 2.9 to 0.1 mg/cm 2 , providing the opportunity for comparisons across a large set of samples produced by different methods. Two widely accessible characterization techniques: X-ray computed tomography (XCT) and scanning electron microscopy energy dispersive X-ray spectroscopy (SEM-EDS) were explored. Initial evaluation of selected samples with XCT provided qualitative insights into catalyst distribution, however comprehensive quantitative analysis was limited. SEM-EDS enabled detailed information on the catalyst distribution both qualitatively and quantitatively using two metrics. Atomic and surface area % ratios of Pt:Ir and Ti:Ir revealed trends in catalyst loading and losses into the PTL pores, as well as evaluating the homogeneity of catalyst coatings. The analysis demonstrated that ultrasonic spray coating, electrodeposition, and sputter coating produced the most homogeneous coatings, with minimal catalyst losses observed for electrodeposition and sputter coating. By adapting common techniques with novel, standardized methodologies, this work establishes a universally applicable framework for cross-study comparison of PTEs. The SEM-EDS approach provides a practical, accessible tool for PTE characterization and contributes a reference dataset supporting both research development and rapid quality control.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Sieving Hydrogen Isotopes via Machine Learning Assisted Chemical Vapor Deposition (CVD) of High‐Quality Monolayer Hexagonal Boron Nitride (h‐BN) on Iron Foils

Atomically thin two-dimensional (2D) ceramics, such as monolayer hexagonal boron nitride (h-BN), present potential for disruptive advances in separations. However, sub-atomic scale separation of hydrogen isotopes (H + /D + ) require near pristine 2D material membranes, and scalable synthesis of such high-quality h-BN comparable to mechanically exfoliated crystals remains a significant challenge. Here, we report a scalable Fe-catalyzed chemical vapor deposition (CVD) process for bottom-up synthesis of large-area, high-quality monolayer h-BN films, overcoming key limitations of conventional ammonia-based routes. By leveraging mechanistic insights and higher CVD temperatures, we suppress multilayer formation and achieve uniform monolayer h-BN coverage on commercially available Fe foils. Machine learning enables systematic exploration of the complex, multi-dimensional CVD parameter space (growth time, temperature, precursor temperature, multilayer faction, coverage), providing data-driven approaches to visualize and identify process regimes facilitating predominantly monolayer h-BN growth with minimal secondary nuclei/ad-layers. The optimized Fe-catalyzed CVD h-BN membranes show high-quality as observed by proton/deuteron (H + /D + ) selectivity ≈8.45, approaching the highest quality benchmark of mechanically exfoliated h-BN (H + /D + selectivity ≈10) as well as significantly outperforming Cu-catalyzed CVD h-BN membranes (H + /D + selectivity ≈3.62, control selectivity ≈1.7). Our work provides a scalable cost-effective route for high-quality monolayer h-BN synthesis for sub-atomic scale separations (H + /D + ) and demonstrates the broader potential of machine learning-guided optimization of CVD for advancing synthesis of 2D materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Controlling selective nucleation and growth of dysprosium islands on graphene by metal intercalation

We report metal intercalation is an effective method to modify the physical and chemical properties of low-dimensional systems such as epitaxial graphene. Here, we show that the nucleation and growth of metal nanostructures on epitaxial graphene on SiC(0001) can be dramatically changed by metal intercalation. Using scanning tunneling microscopy experiments, we demonstrate that dysprosium (Dy) metal islands are selectively nucleated on the area with Dy intercalation under both graphene and carbon buffer layers, while the adjacent area with only buffer layer intercalated remains relatively bare. Using first-principles calculations based on density functional theory, we show that adsorption of Dy adatom on the preferred nucleation area is energetically more favorable than on other areas. Moreover, changes in the electronic structure and the interlayer spacing upon Dy intercalation obtained from our calculations are also consistent with experimental observations. Our results indicate that metal intercalation is a promising way to manipulate the interaction between graphene and deposited adatoms.

2-dimensional systems↗