Search NASA⌕ Search

SEARCH · Search NASA

Results for “buffer layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Degradation of Mg-doped zinc oxide buffer layers in thin film CdTe solar cells

Cadmium Sulphide is the conventional n-type buffer layer used in thin film Cadmium Telluride solar cells. It is well known that Cadmium Sulphide causes optical losses and sulphur diffuses into the absorber during high temperature activation. Sputter-deposited Mg-doped ZnO (MZO) has been shown to be an attractive buffer layer for Cadmium Telluride solar cells due to its transparency and tuneable band gap. It is also stable to high temperature processing and avoids diffusion of elements into the cadmium telluride absorber during the cadmium chloride activation treatment. However, degradation is observed in solar cells incorporating MZO buffer layers. Analysis of the MZO film surface potential has revealed significant fluctuations in the thin film work function once the layer is exposed to the atmosphere following deposition. These fluctuations are attributed to the high reactivity to water vapour of the MgO contained in the MZO films. This has been analysed using X-ray Photoelectron Spectroscopy to determine corresponding changes in the surface chemistry. The Zinc Oxide component is relatively stable, but the analysis shows that MgO forms a Mg(OH) 2 layer on the MZO surface which forms a secondary barrier at the MZO/CdTe interface and/or at the interface between MZO and the Fluorine-doped SnO 2 . This affects the Fill Factor and as a consequence it degrades the conversion efficiency.

14 SOLAR ENERGY↗

Epitaxial Electrodeposition of Wide Bandgap Cuprous Bromide on Silver via a Silver Bromide Buffer Layer

Cuprous halides are an important class of wide bandgap p-type semiconductors used in opto-electronics. Cuprous bromide (CuBr) shows potential for short-wavelength devices due to a large exciton binding energy (108 meV) and near-ultraviolet bandgap (3.1 eV). However, the growth of high-quality epitaxial CuBr films by electrodeposition has remained a challenge. Here, we introduce a low-cost electrochemical procedure for producing epitaxial CuBr(111) on a Ag(111) substrate by a [111]-oriented silver bromide (AgBr) buffer layer. The AgBr buffer layer forms during the electrodeposition of the CuBr. The mismatch between CuBr(111) and AgBr(111) is –1.3%. A plausible mechanism for nucleation and growth of the epitaxial CuBr is proposed. X-ray techniques including high resolution X-ray diffraction and X-ray pole figures are used to determine the epitaxial relationship. CuBr(100) is also produced on a Ag(100) surface by a AgBr(100) buffer layer that is rotated in-plane 45° relative to the Ag(100) surface. In conclusion, this in-plane rotation reduces the lattice mismatch from +39.5% for an unrotated film to –1.4% for a 45° rotated film.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of buffer layer growth temperature on epitaxial GaN films deposited by magnetron sputtering

Epitaxial GaN films were deposited by reactive sputtering of a GaAs target in 100 % nitrogen at 700 deg. C on ZnO buffer layers grown at different substrate temperatures over sapphire substrates. High resolution X-ray diffraction measurements and the corresponding analysis show that the growth temperature of buffer layers significantly affects the micro-structural parameters of GaN epilayer, such as lateral coherence length, tilt and twist, while the vertical coherence length remains unaffected. The optimum substrate temperature for buffer layer growth has been found to be 300 deg. C. High epitaxial quality GaN film grown on such a buffer layer exhibited micro strain of 1.8x10{sup -4} along with screw and edge type dislocation densities of 7.87x10{sup 9} and 1.16x10{sup 11}, respectively.

36 MATERIALS SCIENCE↗

A Comparison of CdS and Zn(O,S) Buffer Layers in (Ag,Cu)(In,Ga)Se2 Solar Cells

Cu(In,Ga)Se 2 -based solar cells typically use a C dS buffer layer, even though its relatively low bandgap causes parasitic absorption. While alternatives to CdS have been explored in other studies, limited results have been shown for Ag-alloyed CIGS (ACIGS). In this study, ACIGS solar cells with both CdS and Zn(O,S) buffer layers were fabricated and compared for solar cell performance. The Zn(O,S) buffer slightly improved J sc through reduced absorption, although surface optimization is necessary. The Zn(O,S) ACIGS also had improved FF through reduced series resistance and ideality factor, which could be improved further through optimization. However, the Voc in the Zn(O,S) samples was reduced, likely due to increased bulk and front interface recombination. This study shows the promise of Zn(O,S) as a buffer layer in ACIGS solar cells and suggests pathways for further improvement.

absorption↗

Growth and micro structural studies on Yittria Stabilized Zirconia (YSZ) and Strontium Titanate (STO) buffer layers

Microstructure of Yittria Stabilized Zirconia (YSZ) and Strontium Titanate (STO) of radio frequency magnetron sputtered buffer layers was studied at various sputtering conditions on Si (100), Sapphire and LaAlO3 (100) substrates. The effect of substrate temperatures up to 800 C and sputtering gas pressures in the range of 50 mTorr. of growth conditions was studied. The buffer layers of YSZ and STO showed a strong tendency for columnar growth was observed above 15 mTorr sputtering gas pressure and at high substrate temperatures. Post annealing of these films in oxygen atmosphere reduced the oxygen deficiency and strain generated during growth of the films. Strong c-axis oriented superconducting YBa2Cu3O7-x (YBCO) thin films were obtained on these buffer layers using pulsed laser ablation technique. YBCO films deposited on multilayers of YSZ and STO were shown to have better superconducting properties.

Srinivas, S.↗

The effect of the MgO buffer layer thickness on magnetic anisotropy in MgO/Fe/Cr/MgO buffer/MgO(001)

The relationship between the magnetic properties and MgO buffer layer thickness d was studied in epitaxial MgO/Fe(t)/Cr/MgO(d) layers grown on MgO(001) substrate in which the Fe thickness t ranged from 0.4 nm to 1.1 nm. For 0.4 nm ≤ t ≤ 0.7 nm, a non-monotonic coercivity dependence on the MgO buffer thickness was shown by perpendicular magneto-optic Kerr effect magnetometry. For thicker Fe films, an increase in the buffer layer thickness resulted in a spin reorientation transition from perpendicular to the in-plane magnetization direction. Possible origins of these unusual behaviors were discussed in terms of the suppression of carbon contamination at the Fe surface and changes in the magnetoelastic anisotropy in the system. These results illustrate a method to control magnetic anisotropy in MgO/Fe/Cr/MgO(d) via an appropriate choice of MgO buffer layer thickness d.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigation of hole injection enhancement by MoO{sub 3} buffer layer in organic light emitting diodes

An MoO{sub 3} buffer layer prepared by thermal evaporation as hole injection layer was investigated in organic light emitting diodes. The MoO{sub 3} film inserted between the anode and hole transport layer decreased the operating voltage and enhanced power efficiency. Introduction of 1 nm MoO{sub 3} film, which was found to be the optimum layer thickness, resulted in 45% increase in efficiency compared with traditional ITO anode. Results from atomic force microscopy and photoemission spectroscopy showed that smooth surface morphology and suitable energy level alignment of ITO/MoO{sub 3} interface facilitated hole injection and transport. The hole injection and transport mechanism at the ITO/MoO{sub 3} interface in thin and thick buffer layers were analyzed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth mechanisms of GaSb heteroepitaxial films on Si with an AlSb buffer layer

The initial growth stages of GaSb epilayers on Si substrates and the role of the AlSb buffer layer were studied by high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). Heteroepitaxy of GaSb and AlSb on Si both occur by Volmer-Weber (i.e., island mode) growth. However, the AlSb and GaSb islands have distinctly different characteristics as revealed through an atomic-resolution structural study using Z-contrast of HAADF-STEM imaging. While GaSb islands are sparse and three dimensional, AlSb islands are numerous and flattened. The introduction of 3D island-forming AlSb buffer layer facilitates the nucleation of GaSb islands. The AlSb islands-assisted nucleation of GaSb islands results in the formation of drastically higher quality planar film at a significantly smaller thickness of films. The interface of the AlSb and GaSb epilayers with the Si substrate was further investigated with energy dispersive X-ray spectrometry to elucidate the key role of the AlSb buffer layer in the growth of GaSb epilayers on Si substrates.

36 MATERIALS SCIENCE↗

Buffer Layer Effects on Tandem InGaAs TPV Devices

Single junction indium gallium arsenide (InGaAs) based TPV devices have demonstrated efficiencies in excess of 20% at radiator temperatures of 1058 C. Modeling suggests that efficiency improvements in single bandgap devices should continue although they will eventually plateau. One approach for extending efficiencies beyond the single bandgap limit is to follow the technique taken in the solar cell field, namely tandem TPV cells. Tandem photovoltaic devices are traditionally composed of cells of decreasing bandgap, connected electrically and optically in series. The incident light impinges upon the highest bandgap first. This device acts as a sieve, absorbing the high-energy photons, while allowing the remainder to pass through to the underlying cell(s), and so on. Tandem devices reduce the energy lost to overexcitation as well as reducing the current density (Jsc). Reduced Jsc results in lower resistive losses and enables the use of thinner and lower doped lateral current conducting layers as well as a higher pitch grid design. Fabricating TPV tandem devices utilizing InGaAs for all of the component cells in a two cell tandem necessitates the inclusion of a buffer layer in-between the high bandgap device (In0.53 Ga0.47As - 0.74eV) and the low bandgap device (In0.66Ga0.34As - 0.63eV) to accommodate the approximately 1% lattice strain generated due to the change in InGaAs composition. To incorporate only a single buffer layer structure, we have investigated the use of the indium phosphide (InP) substrate as a superstrate. Thus the high-bandgap, lattice- matched device is deposited first, followed by the buffer structure and the low-bandgap cell. The near perfect transparency of the high bandgap (1.35eV) iron-doped InP permits the device to be oriented such that the light enters through the substrate. In this paper we examine the impact of the buffer layer on the underlying lattice-matched InGaAs device. 0.74eV InGaAs devices were produced in a variety of configurations both with and without buffer layers. All structures were characterized by reciprocal space x-ray diffraction to determine epilayer composition and residual strain. Electrical characterization of the devices was performed to examine the effect of the buffer on the device performance. The effect of the buffer structure depends upon where it is positioned. When near the emitter region, a 2.6x increase in dark current was measured, whereas no change in dark current was observed when it was near the base region.

Wilt, David M.↗

Effect of AlN buffer layer properties on the morphology and polarity of GaN nanowires grown by molecular beam epitaxy

Low-temperature AlN buffer layers grown via plasma-assisted molecular beam epitaxy on Si (111) were found to significantly affect the subsequent growth morphology of GaN nanowires. The AlN buffer layers exhibited nanowire-like columnar protrusions, with their size, shape, and tilt determined by the AlN V/III flux ratio. GaN nanowires were frequently observed to adopt the structural characteristics of the underlying AlN columns, including the size and the degree of tilt. Piezoresponse force microscopy and polarity-sensitive etching indicate that the AlN films and the protruding columns have a mixed crystallographic polarity. Convergent beam electron diffraction indicates that GaN nanowires are Ga-polar, suggesting that Al-polar columns are nanowire nucleation sites for Ga-polar nanowires. GaN nanowires of low density could be grown on AlN buffers that were predominantly N-polar with isolated Al-polar columns, indicating a high growth rate for Ga-polar nanowires and suppressed growth of N-polar nanowires under typical growth conditions. AlN buffer layers grown under slightly N-rich conditions (V/III flux ratio = 1.0 to 1.3) were found to provide a favorable growth surface for low-density, coalescence-free nanowires.

36 MATERIALS SCIENCE↗

Electron dynamics of the buffer layer and bilayer graphene on SiC

Angle- and time-resolved two-photon photoemission (TPPE) was used to investigate electronic states in the buffer layer of 4H-SiC(0001). An image potential state (IPS) series was observed on this strongly surface-bound buffer layer, and dispersion measurements indicated free-electron-like behavior for all states in this series. These results were compared with TPPE taken on bilayer graphene, which also show the existence of a free-electron-like IPS series. Lifetimes for the n = 2, and n = 3 states were obtained from time-resolved TPPE; slightly increased lifetimes were observed in the bilayer graphene sample for the n = 2 the n = 3 states. Despite the large band gap of graphene at the center of the Brillouin zone, the lifetime results demonstrate that the graphene layers do not behave as a simple tunneling barrier, suggesting that the buffer layer and graphene overlayers play a direct role in the decay of IPS electrons.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

On buffer layers as non-reflecting computational boundaries

We examine an absorbing buffer layer technique for use as a non-reflecting boundary condition in the numerical simulation of flows. One such formulation was by Ta'asan and Nark for the linearized Euler equations. They modified the flow inside the buffer zone to artificially make it supersonic in the layer. We examine how this approach can be extended to the nonlinear Euler equations. We consider both a conservative and a non-conservative form modifying the governing equations in the buffer layer. We compare this with the case that the governing equations in the layer are the same as in the interior domain. We test the effectiveness of these buffer layers by a simulation of an excited axisymmetric jet based on a nonlinear compressible Navier-Stokes equations.

Hayder, M. Ehtesham↗

Final Report: Rational Design of Wide Band Gap Buffer Layers for High-Efficiency Thin-Film Photovoltaics

The main objective of this project is to enable rational design of wide band gap buffer layer materials for CIGS thin-film PV by building understanding of the correlation of atomic-scale defects in the buffer layer and at the buffer/absorber interface with device electrical properties. Optimized wide band gap buffers are needed to reduce efficiency loss from parasitic absorption in the buffer. The approach uses first-principles materials simulations coupled with nanoscale analytical electron microscopy as well as device electrical characterization. Materials and devices are produced by an industrial partner in a manufacturing line to maximize relevance, with the goal of enabling R&D of new buffer layer compositions or deposition processes to push device efficiencies above 21%. Cadmium sulfide (CdS) is the reference material for analysis, as the prototypical high-performing buffer material.

14 SOLAR ENERGY↗

ZnO as a buffer layer for growth of BiFeO{sub 3} thin films

Multiferroic BiFeO{sub 3} thin film was grown on the ZnO-buffered Pt/TiO{sub 2}/SiO{sub 2}/Si(100) substrate by off-axis radio frequency magnetron sputtering, where the ZnO buffer layer gave rise to a strong (110) texture for the BiFeO{sub 3} thin film. The resulting BiFeO{sub 3}/ZnO thin film exhibits diode-like and resistive hysteresis behavior, in which the resistive hysteresis and rectifying ratio are dependent on the applied voltage and temperature. The resistive switching behavior of the BiFeO{sub 3}/ZnO thin film is shown to relate to the trap-controlled space charge limited conduction and interface-limited Fowler-Nordheim tunneling, while the polarization reversal takes place in the BiFeO{sub 3} layer of the heterostructure. The BiFeO{sub 3}/ZnO thin film is also demonstrated with a higher remanent polarization (2P{sub r{approx}}153.6 {mu}C/cm{sup 2}), a much lower dielectric loss (tan {delta}{approx}0.012), and a better fatigue endurance as compared to those of the BiFeO{sub 3} thin film without a ZnO buffer layer, where the much reduced leakage is largely responsible for the enhanced ferroelectric behavior. The ZnO as a buffer layer for BiFeO{sub 3} significantly changes the dielectric relaxation and conduction mechanisms, when the dielectric relaxation and electrical conduction are governed by the thermal excitation of carriers from the second-ionization and short-range motion of oxygen vacancies, respectively, while the relaxation process remains the same over the entire temperature range of 20 to 200 deg. C investigated in the present study.

36 MATERIALS SCIENCE↗

L1 0 -FeNi films on Au-Cu-Ni buffer-layer: a high-throughput combinatorial study

Here, the fct L1 0 -FeNi alloy is a promising candidate for the development of high performance critical-elements-free magnetic materials. Among the different materials, the Au-Cu-Ni alloy has resulted very promising; however, a detailed investigation of the effect of the buffer-layer composition on the formation of the hard FeNi phase is still missing. To accelerate the search of the best Au-Cu-Ni composition, a combinatorial approach based on High-Throughput (HT) experimental methods has been exploited in this paper. HT magnetic characterization methods revealed the presence of a hard magnetic phase with an out-of-plane easy-axis, whose coercivity increases from 0.49 kOe up to 1.30 kOe as the Au content of the Cu-Au-Ni buffer-layer decreases. Similarly, the out-of-plane magneto-crystalline anisotropy energy density increases from 0.12 to 0.35 MJ/m 3 . This anisotropy is attributed to the partial formation of the L1 0 FeNi phase induced by the buffer-layer. In the range of compositions we investigated, the buffer-layer structure does not change significantly and the modulation of the magnetic properties with the Au content in the combinatorial layer is mainly related to the different nature and extent of interlayer diffusion processes, which have a great impact on the formation and order degree of the L1 0 FeNi phase.

25 ENERGY STORAGE↗

Characterization of ZrO2 buffer layers for sequentially evaporated Y-Ba-CuO on Si and Al2O3 substrates

Thin film high temperature superconductors have the potential to change the microwave technology for space communications systems. For such applications it is desirable that the films be formed on substrates such as Al2O3 which have good microwave properties. The use of ZrO2 buffer layers between Y-Ba-Cu-O and the substrate has been investigated. These superconducting films have been formed by multilayer sequential electron beam evaporation of Cu, BaF2 and Y with subsequent annealing. The three layer sequence of Y/BaF2/Cu is repeated four times for a total of twelve layers. Such a multilayer film, approximately 1 micron thick, deposited directly on SrTiO3 and annealed at 900 C for 45 min produces a film with a superconducting onset of 93 K and critical temperature of 85 K. Auger electron spectroscopy in conjunction with argon ion sputtering was used to obtain the distribution of each element as a function of depth for an unannealed film, the annealed film on SrTiO3 and annealed films on ZrO2 buffer layers. The individual layers were apparent. After annealing, the bulk of the film on SrTiO3 is observed to be fairly uniform while films on the substrates with buffer layers are less uniform. The Y-Ba-Cu-O/ZrO2 interface is broad with a long Ba tail into the ZrO2, suggesting interaction between the film and the buffer layer. The underlying ZrO2/Si interface is sharper. The detailed Auger results are presented and compared with samples annealed at different temperatures and durations.

Valco, George J.↗

Molecular beam epitaxy growth of high quality p-doped SnS van der Waals epitaxy on a graphene buffer layer

We report on the systematic investigation of optoelectronic properties of tin (IV) sulfide (SnS) van der Waals epitaxies (vdWEs) grown by molecular beam epitaxy (MBE) technique. Energy band simulation using commercial CASTEP code indicates that SnS has an indirect bandgap of size 0.982 eV. Furthermore, our simulation shows that elemental Cu can be used as a p-type dopant for the material. Growth of high quality SnS thin films is accomplished by MBE technique using graphene as the buffer layer. We observed significant reduction in the rocking curve FWHM over the existing published values. Crystallite size in the range of 2-3 {mu}m is observed which is also significantly better than the existing results. Measurement of the absorption coefficient, {alpha}, is performed using a Hitachi U-4100 Spectrophotometer system which demonstrate large values of {alpha} of the order of 10{sup 4} cm{sup -1}. Sharp cutoff in the values of {alpha}, as a function of energy, is observed for the films grown using a graphene buffer layer indicating low concentration of localized states in the bandgap. Cu-doping is achieved by co-evaporation technique. It is demonstrated that the hole concentration of the films can be controlled between 10{sup 16} cm{sup -3} and 5 x 10{sup 17}cm{sup -3} by varying the temperature of the Cu K-cell. Hole mobility as high as 81 cm{sup 2}V{sup -1}s{sup -1} is observed for SnS films on graphene/GaAs(100) substrates. The improvements in the physical properties of the films are attributed to the unique layered structure and chemically saturated bonds at the surface for both SnS and the graphene buffer layer. Consequently, the interaction between the SnS thin films and the graphene buffer layer is dominated by van der Waals force and structural defects at the interface, such as dangling bonds or dislocations, are substantially reduced.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of GaAs surface treatments for ZnSe growth by molecular beam epitaxy without a buffer layer

Atomically clean and smooth surfaces are critical prerequisite for the epitaxial regrowth of dissimilar semiconductors. Using ZnSe/GaAs as a model system, epitaxial regrowth without a buffer layer after thermal cleaning with various As-fluxes, atomic Ga flux, and atomic hydrogen treatments to the GaAs substrates and the surfaces were investigated in this work via in-situ Auger electron spectroscopy (AES). The ZnSe epilayers grown on the pre-treated GaAs surfaces without a buffer layer were characterized by X-ray diffraction (XRD), photoluminescence (PL) and atomic force microscopy (AFM) to evaluate the effectiveness of the surface treatment methods. It was found that a high quality ZnSe layer can be achieved by atomic hydrogen surface treatment at 300°C without requiring GaAs buffer layer growth, which reveals a path for epitaxy growth avoiding high temperature treatments.

42 ENGINEERING↗