Search NASA⌕ Search

SEARCH · Search NASA

Results for “capacitance reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Reduced graphene oxide hydrogels deposited in nickel foam for supercapacitor applications: Toward high volumetric capacitance

Graphene hydrogels have been considered as ideal materials for high-performance supercapacitors. However, their low volumetric capacitance significantly limits its real application. In this study, we report an environment-friendly and scalable method to prepare high packing density, electrochemically reduced graphene oxide hydrogels (ERGO) for supercapacitor application by the electrophoretic deposition of graphene oxide onto nickel foam, followed by the electrochemical reduction and hydraulic compression of the deposited materials. The as-prepared ERGO on nickel foam was hydraulic compressed up to 20 tons, resulting in an increase of the packing density of ERGO from 0.0098 to 1.32 g cm –3 . Consequently, the volumetric capacitance and volumetric energy density of ERGOs greatly increased from 1.58 F cm –3 and 0.053 Wh cm –3 (as-prepared ERGO) to 176.5 F cm –3 and 6.02 Wh cm –3 (ERGO compressed at 20 tons), respectively. The ERGOs also exhibited long-term electrochemical stability with a capacitance retention in the range of approximately 79–90% after 10 000 cycles. Lastly, we believe that these high packing density ERGOs are promising for real-world energy storage devices for which scalable, cost-effective manufacturing is of significance and for which space constraints are paramount.

25 ENERGY STORAGE↗

Supercapacitance and oxygen reduction characteristics of sulfur self-doped micro/mesoporous bio-carbon derived from lignin

The growing global concerns about the increased fossil fuel consumption and related environmental issues have motived scientists to find new, green and sustainable energy resources and technologies. In this work, byproduct lignin biomass was successfully converted into sulfur self-doped carbon via in-situ hydrothermal carbonization followed by thermal annealing. The sulfur surface content in the as-prepared porous carbon is up to 3.2 wt % as indicated by the XPS measurements. Beyond the traditional synthesis methods which employ KOH or ZnCl 2 treatment to activate the carbon surface, the developed synthesis strategy doesn't include such separate activation step. Activation of the as-prepared porous carbons has been conducted in-situ via a calcium ions during the synthesis process. The resulting materials displayed high BET surface areas up to 660 m 2 g -1 along with micro/meso porosity and graphitic/amorphous carbon structure. The as-prepared sulfur self-doped electrode materials displayed high electrochemical activity for supercapacitor applications. The sulfur-doped carbon SC-850 electrode exhibited capacitance of 225 F/g at a current density of 0.5 A/g, and high durability where the electrode capacitance did not change over 10,000 cycles at harsh conditions. Additionally, the as-prepared sulfur-doped carbons are promising catalysts for oxygen reduction reaction with 3.4 electrons transferred per molecule at 0.8 V, which approaches the optimum 4-electron pathway.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Production of graphene-derivatives using organic molecules for supercapacitors and beyond

Graphene is rapidly expanding for applications ranging from nanoelectronics to space exploration. A material with such enormous potential requires a variety of synthesis methods. Here, we report a library of relatively sustainable redox-active organic molecules for the reduction of graphene oxide (GO) namely N,N,N',N'-tetramethyl-p-phenylenediamine (TMPD), 7,7,8,8-tetracyanoquinodimethane (TCNQ), ferrocene (Ferro), and decamethylferrocene (DFerro). Among them, the reduction of GO using TMPD starts even with simple hand-shaking for just a few minutes. By controlling the sonication time under ambient conditions, one can control the electronic properties of the reduced graphene oxide (rGO). The resulting free-standing films delivered a capacitance of 185 F/g when tested them as supercapacitor electrodes. We also demonstrated that TMPD can exfoliate graphite into few-layer graphene sheets with simple sonication. Here, we further show that under mild heating, these molecules can serve as dopants during the reduction process to produce nitrogen-doped graphene. Our results may guide researchers to explore sustainable organic molecules for the large-scale production of graphene-based materials for diverse applications.

36 MATERIALS SCIENCE↗

Anomalous Loss Reduction Below Two‐Level System Saturation in Aluminum Superconducting Resonators

Superconducting resonators are widely used in many applications such as qubit readout for quantum computing, and kinetic inductance detectors. These resonators are susceptible to numerous loss and noise mechanisms, especially the dissipation due to two-level systems (TLS) which become the dominant source of loss in the few-photon and low temperature regime. In this study, capacitively-coupled aluminum half-wavelength coplanar waveguide resonators are investigated. Surprisingly, the loss of the resonators is observed to decrease with a lowering temperature at low excitation powers and temperatures below the TLS saturation. This behavior is attributed to the reduction of the TLS resonant response bandwidth with decreasing temperature and power to below the detuning between the TLS and the resonant photon frequency in a discrete ensemble of TLS. When response bandwidths of TLS are smaller than their detunings from the resonance, the resonant response and thus the loss is reduced. At higher excitation powers, the loss follows a logarithmic power dependence, consistent with predictions from the generalized tunneling model (GTM). A model combining the discrete TLS ensemble with the GTM is proposed and matches the temperature and power dependence of the measured internal loss of the resonator with reasonable parameters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Irradiation damage in graphene on SiO{sub 2} probed by local mobility measurements

Using a method based on scanning capacitance spectroscopy, local measurements of the electron mean free path (l) and mobility (mu) have been carried out on single layers of graphene (SLG) mechanically exfoliated from highly oriented pyrolytic graphite and deposited on SiO{sub 2}/Si. Lateral inhomogeneity of l and mu was found both on pristine and ion irradiated SLG with different C ion fluences (from 10{sup 13} to 10{sup 14} cm{sup -2}), with an increasing spread in the distribution of l and mu for larger fluences. Before irradiation, the spread was explained by the inhomogeneous distribution of charged impurities on SLG surface and/or at the interface with SiO{sub 2}. After irradiation, lattice vacancies cause a local reduction of mu in the damaged regions.

36 MATERIALS SCIENCE↗

Nitrogen and sulfur co-doped porous carbon sheets for energy storage and pH-universal oxygen reduction reaction

Developing efficient electrocatalysts for energy storage and oxygen reduction reaction (ORR) is of great sig-nificance for the utilization of renewable energy. In particular, designing catalysts with both promising activityand long stability for ORR in pH-universal electrolytes still remain as a tremendous challenge. To tackle such aproblem, metal-free nitrogen and sulfur co-doped porous carbon sheet (NSPCS) was rationally designed in thiswork in order to integrate the two reported routes of enhancing the electrocatalytic activity of graphene. The as-prepared NSPCS has an onset potential of 0.89 V vs. RHE, and half-wave potential E1/2 ≈ 0.75 V during ORR inacidic solution, making it as the most active ORR catalyst. Moreover, the resulting NSPCS also shows a 0.03 Vpositive shift of half-wave potential than commercial Pt/C for ORR and excellent charge capacitive performancein alkaline media. Electron microscopy revealed high degree of defects on NSPCS surface. This, coupled withsynergistic doping effects of nitrogen and sulfur, optimized the active sites and charge transfer, rationalized theoutstanding performance in both oxygen reduction reactions and supercapacitors.Developing efficient electrocatalysts for energy storage and oxygen reduction reaction (ORR) is of great significance for the utilization of renewable energy. In particular, designing catalysts with both promising activity and long stability for ORR in pH-universal electrolytes still remain as a tremendous challenge. To tackle such a problem, metal-free nitrogen and sulfur co-doped porous carbon sheet (NSPCS) was rationally designed in this work in order to integrate the two reported routes of enhancing the electrocatalytic activity of graphene. The as-prepared NSPCS has an onset potential of 0.89 V vs. RHE, and half-wave potential E-1/2 approximate to 0.75 V during ORR in acidic solution, making it as the most active ORR catalyst. Moreover, the resulting NSPCS also shows a 0.03 V positive shift of half-wave potential than commercial Pt/C for ORR and excellent charge capacitive performance in alkaline media. Electron microscopy revealed high degree of defects on NSPCS surface. This, coupled with synergistic doping effects of nitrogen and sulfur, optimized the active sites and charge transfer, rationalized the outstanding performance in both oxygen reduction reactions and supercapacitors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elucidating the impact of the ionomer equivalent weight on a platinum group metal-free PEMFC cathode via oxygen limiting current

Leveraging the interactions between ionomer and catalyst can increase the performance of proton exchange membrane fuel cells. The impacts of the equivalent weight (EW) of perfluorosulfonic acid–based ionomers on the platinum group metal-free electrode structure and fuel cell performance have not been fully explored. Four membrane electrode assemblies (MEAs) were prepared by using a commercial Fe–N–C catalyst, two perfluorosulfonic acid ionomers with different EWs, that is, Aquivion 720 (A720) and Nafion 1100 (N1100), and two ionomer-to-catalyst (I/C) ratios. The four MEAs were characterized to understand the impact of the ionomer EW and content on the capacitance, proton conductivity, and mass transport on the cathode. The mass transport resistance was measured for the first time using a new oxygen reduction reaction limiting current method enabling to couple the effects of oxygen diffusion with liquid water generation. Low EW ionomer combined with a moderate I/C results in improved performance due to its enhanced proton conductivity. However, when used at high I/C, it can cause severe water flooding at high current density due to the enhanced liquid water uptake, especially at high relative humidity, resulting in lower catalyst utilization and higher mass transport resistance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of 63 MeV proton irradiation on the performance of MWIR InGaAs/InAsSb nBn photodetectors

An investigation into the effects of 63 MeV proton irradiation on high-sensitivity mid-wave infrared InGaAs/InAsSb nBn devices is performed. Three different structures with various absorber region doping profiles are irradiated and characterized to assess their impact on performance degradation. Minority carrier lifetime is measured using time-resolved photoluminescence and lifetime damage factors are assessed. The majority carrier concentration is determined via capacitance–voltage measurements and dopant introduction rates are calculated. An analysis of dark current density is performed using these material parameters, revealing a reduction in mobility with proton fluence and the emergence of a proton-induced trap energy level. Quantum efficiency is calculated at each proton fluence, and quantum efficiency damage factors show that the graded doping structure exhibits the least reduction of quantum efficiency with dose, attributed to its effective mobility enhancement. Conclusively, detector sensitivity, assessed via shot-noise limited noise-equivalent irradiance, shows that the graded doping structure is the least susceptible to high energy proton irradiation-induced performance degradation.

Physics↗

Planar Transformer With Asymmetric Integrated Leakage Inductance Using Horizontal Air Gap

This article presents a novel planar-based transformer winding and core structure with controllable leakage inductance generation for integrated magnetics applications. As a result of limitations in integrated magnetics from the literature, a new approach is proposed utilizing semi-interleaved windings and controllable leakage via a leakage flux core leg featuring a horizontal air gap. Here, the proposed transformer design is analyzed via detailed reluctance modeling to determine closed-form equations for the magnetizing and asymmetrically distributed leakage inductances. Next, a genetic-algorithm-based multiobjective design optimization problem is developed, seeking to minimize the core and winding losses of the proposed transformer subject to a set of parametric and geometric constraints in a dc-ac dual-active-bridge topology for microinverter applications. The optimization was extended to include other integrated magnetic structures from the literature, where it is determined that the proposed transformer is superior from the perspectives of efficiency, footprint area, and parasitic capacitance. Based on the results of the optimization analysis, two designs with theoretical transformer California Energy Commission (CEC) efficiency drops (i.e., CEC efficiency reduction specifically due to the transformer loss mechanisms) of 1.19% and 0.83% were fabricated and evaluated for electrical and thermal performance in the proposed 40 V, 400 W microinverter.

42 ENGINEERING↗

Damage free Ar ion plasma surface treatment on In{sub 0.53}Ga{sub 0.47}As-on-silicon metal-oxide-semiconductor device

In this paper, we investigated the effect of in-situ Ar ion plasma surface pre-treatment in order to improve the interface properties of In{sub 0.53}Ga{sub 0.47}As for high-κ top-gate oxide deposition. X-ray photoelectron spectroscopy (XPS) and metal-oxide-semiconductor capacitors (MOSCAPs) demonstrate that Ar ion treatment removes the native oxide on In{sub 0.53}Ga{sub 0.47}As. The XPS spectra of Ar treated In{sub 0.53}Ga{sub 0.47}As show a decrease in the AsO{sub x} and GaO{sub x} signal intensities, and the MOSCAPs show higher accumulation capacitance (C{sub acc}), along with reduced frequency dispersion. In addition, Ar treatment is found to suppress the interface trap density (D{sub it}), which thereby led to a reduction in the threshold voltage (V{sub th}) degradation during constant voltage stress and relaxation. These results outline the potential of surface treatment for III-V channel metal-oxide-semiconductor devices and application to non-planar device process.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Inversion Reduction Method for Real and Complex Distribution Feeder Models

We report the proliferation of distributed generation on distribution feeders triggers a large number of integration and planning studies. Further, the complexity of distribution feeder models, short simulation time steps, and long simulation horizons rapidly render studies computational burdensome. To mend this issue, we propose a methodology for reducing the number of nodes, loads, generators, line, and transformers of p-phase distribution feeders with unbalanced loads and generation, non-symmetric wire impedance, mutual coupling, shunt capacitance, and changes in voltage and phase. The methodology is derived on a constant power load assumption and employs a Gaussian elimination inversion technique to design the reduced feeder. Compared to previous work by the authors, the inversion reduction takes half the time and voltage errors after reduction are reduced by an order of magnitude. Using a snapshot simulation the reduction is tested on six additional publicly available feeders with a maximum voltage error 0.0075 p.u. regardless of feeder size or complexity, and typical errors on the order of 1 × 10 -4 p.u. Lastly, for a day long quasi-static time series simulation on the UCSD A feeder, errors are shown to increase with changes in loading when a large number of buses removed, but shows less variation for less than 85% of buses removed.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Distance-dependent dielectric constant at the calcite/electrolyte interface: Implication for surface complexation modeling

Hypothesis: The electrical double layer formed at the mineral/electrolyte interface is often modeled using mean-field approaches based on a continuum description of the solvent whose dielectric constant is assumed to decrease monotonically with decreasing distance to the surface. In contrast, molecular simulations show that the solvent polarizability oscillates near the surface similar to the water density profile - as shown previously, for example, by Bonthuis et al. (D.J. Bonthuis, S. Gekle, R.R. Netz, Dielectric Profile of Interfacial Water and its Effect on Double-Layer Capacitance, Phys Rev Lett 107(16) (2011) 166102). Here, we showed that molecular and mesoscale pictures agree by spatially averaging the dielectric constant obtained from molecular dynamics simulations over the distances relevant to the mean-field representation. In addition, the values of capacitances used to describe the electrical double layer in Surface Complexation Models (SCMs) of the mineral/electrolyte interface can be estimated using molecularly informed spatially averaged dielectric constants and positions of hydration layers. Experiments: First, we used molecular dynamics simulations to model the calcite 101¯4/electrolyte interface. Next, by using atomistic trajectories, we calculated the distance-dependent static dielectric constant and water density in the direction normal to the. Finally, we applied spatial compartmentalization consistent with the model of parallel-plate capacitors connected in series to estimate SCM capacitances. Findings: Computationally expensive simulations are required to determine the dielectric constant profile of interfacial water near the mineral surface. On the other hand, water density profiles are readily assessable from much shorter simulation trajectories. Our simulations confirmed that dielectric and water density oscillations at the interface are correlated. Here, we parametrized linear regression models to estimate the dielectric constant directly from the local water density. This is a significant computational shortcut compared to slowly converging calculations relying on total dipole moment fluctuations. The amplitude of the interfacial dielectric constant oscillation can exceed the dielectric constant of the bulk water, suggesting an ice-like frozen state, but only if there are no electrolyte ions. The interfacial accumulation of electrolyte ions causes a decrease in the dielectric constant due to the reduction of water density and re-orientation of water dipoles in ion hydration shells. Finally, we show how to use the computed dielectric properties to estimate SCM's capacitances.

58 GEOSCIENCES↗

Quasi-Steady-State Polarization Reveals the Interplay of Capacitive and Faradaic Processes in Capacitive Deionization

We employ slow cyclic voltammetry to study the quasi-steady-state capacitive deionization (CDI) of aerated 10 mM NaCl from V cell =-0.2 to 2 V. The method allows for the deconvolution of capacitive and faradaic processes, which are significant even at low voltage, in conjunction with pH, conductivity, dissolved oxygen (DO), and electrode potential measurements. The pH at three locations and effluent DO data identify asymmetric electrosorption in the cell configured with pristine activated carbon electrodes, where charge is irreversibly consumed to produce H + /OH - instead of reversibly adsorbing Cl - /Na + . Implementing a reference electrode resolves ion adsorption as a function of the individual potential at each electrode. Near-electrode pH probes reveal pH environments that diverge by up to 8 units during cell polarization and allow more accurate calculation of faradaic redox potentials in a flow-by CDI cell. In the aerated NaCl solution that will be relevant to industrial-scale water treatment, we find that DO reduction occurs to a greater degree than Na + adsorption at the cathode until DO removal becomes mass transfer limited at <-0.2 V vs. SHE. Two cell architectures – flow-by and flow-through – corroborate our findings. Finally, we reconcile all measurements to generate a map displaying how the potential is partitioned amongst the capacitive and faradaic processes occurring during CDI operation over a 2.2 V window.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Distance preserving machine learning for uncertainty aware accelerator capacitance predictions

Abstract Accurate uncertainty estimations are essential for producing reliable machine learning models, especially in safety-critical applications such as accelerator systems. Gaussian process models are generally regarded as the gold standard for this task; however, they can struggle with large, high-dimensional datasets. Combining deep neural networks with Gaussian process approximation techniques has shown promising results, but dimensionality reduction through standard deep neural network layers is not guaranteed to maintain the distance information necessary for Gaussian process models. We build on previous work by comparing the use of the singular value decomposition against a spectral-normalized dense layer as a feature extractor for a deep neural Gaussian process approximation model and apply it to a capacitance prediction problem for the High Voltage Converter Modulators in the Oak Ridge Spallation Neutron Source. Our model shows improved distance preservation and predicts in-distribution capacitance values with less than 1% error.

43 PARTICLE ACCELERATORS↗

Diffusion of In{sub 0.53}Ga{sub 0.47}As elements through hafnium oxide during post deposition annealing

Diffusion of indium through HfO{sub 2} after post deposition annealing in N{sub 2} or forming gas environments is observed in HfO{sub 2}/In{sub 0.53}Ga{sub 0.47}As stacks by low energy ion scattering and X-ray photo electron spectroscopy and found to be consistent with changes in interface layer thickness observed by transmission electron microscopy. Prior to post processing, arsenic oxide is detected at the surface of atomic layer deposition-grown HfO{sub 2} and is desorbed upon annealing at 350 °C. Reduction of the interfacial layer thickness and potential densification of HfO{sub 2}, resulting from indium diffusion upon annealing, is confirmed by an increase in capacitance.

36 MATERIALS SCIENCE↗

N-Doped Graphene (N-G)/MOF(ZIF-8)-Based/Derived Materials for Electrochemical Energy Applications: Synthesis, Characteristics, and Functionality

In recent years, graphene-type materials originating from metal–organic frameworks (MOFs) or integrated with MOFs have exhibited notable performances across various applications. However, a comprehensive understanding of these complex materials and their functionalities remains obscure. While some studies have reviewed graphene/MOF composites from different perspectives, due to their structural–functional intricacies, it is crucial to conduct more in-depth reviews focusing on specific sets of graphene/MOF composites designed for particular applications. In this review, we thoroughly investigate the syntheses, characteristics, and performances of N-G/MOF(ZIF-8)-based/derived materials employed in electrochemical energy conversion and storage systems. Special attention is given to realizing their fundamental functionalities. The discussions are divided into three segments based on the application of N-G/ZIF-8-based/derived materials as electrode materials for batteries, electrodes for electrochemical capacitors, and electrocatalysts. As electrodes for batteries, N-G/MOF(ZIF-8) materials can mitigate issues like an electrode volume expansion for Li-ion batteries and the ‘shuttle effect’ for Li-S batteries. As electrodes for electrochemical capacitors, these materials can considerably improve the ion transfer rate and electronic conductivity, thereby enhancing the specific capacitance while maintaining the structural stability. Also, it was observed that these materials could occasionally outperform standard platinum-based catalysts for the electrochemical oxygen reduction reaction (ORR). The reported electrochemical performances and structural parameters of these materials were carefully tabulated in uniform units and scales. Through a critical analysis of the present synthesis trends, characteristics, and functionalities of these materials, specific aspects were identified that required further exploration to fully utilize their inherent capabilities.

Electrochemistry↗

Submodule Capacitor Reduction for a 1 MVA SiC-Based Modular Multilevel Converter Motor Drive using High Frequency Common-Mode Voltage Injection

This paper describes a strategy to reduce the size of submodule capacitors of a 1 MVA, 0-1 kHz, 7-level modular multilevel converter (MMC) based medium voltage variable speed drive (MVVSD) using 1.7 kV SiC MOSFETs. Hardware designs of submodules to withstand high dv/dt and capacitor selection based on common mode voltage injection have been presented in literature. The issue with injection is the error in tracking of injected circulation current which results in fundamental frequency fluctuations in the submodule capacitor voltage. This paper presents a strategy for higher frequency sinusoidal common mode voltage based on more accurate tracking of the circulating current; realized through an improved control strategy combined with a higher switching frequency. Using the methods presented in this paper, a smaller submodule capacitance and reduced output current THD of the motor drive is achieved. A loss analysis model is proposed to evaluate the effect of the proposed strategy on the MMC efficiency. This helps balance the reduction in the capacitor against the increase in the losses as a result of increased switching frequency. Simulations and a down-scaled experimental setup are used to demonstrate this concept.

Potty, Karun↗