Search NASA⌕ Search

SEARCH · Search NASA

Results for “carbon phenolic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

One-step transformation of biomass to fuel precursors using a bi-functional combination of Pd/C and water tolerant Lewis acid

Direct one-pot transformation of lignocellulosic biomass has been developed as an effective and sustainable strategy to produce fuel blend stocks and high value chemical building blocks. In this wok, a bi-functional catalyst system consisting of palladium supported on carbon (Pd/C) and metal triflates (i.e., Sm(OTf) 3 , La(OTf) 3 , and Cu(OTf) 2 ) were shown to promote the biomass liquefaction in both hot-compressed water and supercritical ethanol medium, converting fir wood into oxygenated compounds. We report the highest bio-oil yield from hydrothermal liquefaction (HTL) was 10.47 wt% over Pd/C whereas the highest bio-oil yield of 49.71 wt% was achieved from supercritical ethanol liquefaction (SCEL) over the bi-functional catalyst system of Pd/C and La(OTf) 3 . Higher heating values, carbon recovered values and boiling point distributions were further determined for elucidating the physical properties of the bio-oils. Gas chromatography mass spectrometry (GC–MS) analysis of the bio-oils revealed the chemical composition of the bio-oils. Substituted phenols and cyclopentenone/cyclopentanone type compounds consisted of more than 60 area% of the total products from HTL, whereas phenol and esters represented the major products from SCEL. The major reaction pathways are proposed based on the GC–MS results, which include depolymerizaton, isomerization, dehydration, condensation, and hydrogenation.

09 BIOMASS FUELS↗
DOE OSTI2020

Arabidopsis SnRK1 negatively regulates phenylpropanoid metabolism via Kelch domain-containing F-box proteins

Phenylpropanoid metabolism represents a substantial metabolic sink for the photosynthetically fixed carbon. The evolutionarily conserved Sucrose Non-Fermenting Related Kinase 1 (SnRK1) is a major metabolic sensor that reprograms metabolism upon carbon deprivation. However, it is not clear if and how SnRK1-mediated sugar signaling pathway controls phenylpropanoid metabolism. Here, we show that Arabidopsis SnRK1 negatively regulates phenylpropanoid biosynthesis via a group of Kelch domain-containing F-Box (KFB) proteins that are responsible for the ubiquitination and degradation of phenylalanine ammonia lyase (PAL). Down-regulation of AtSnRK1 significantly promoted the accumulation of soluble phenolics and lignin polymers and drastically increased PAL cellular accumulation but only slightly altered its transcription level. Co-expression of SnRK1α with PAL in Nicotiana benthamiana leaves resulted in the severe attenuation of the latter's protein level, but protein interaction assays suggested PAL is not a direct substrate of SnRK1. Furthermore, up- or down-regulation of AtSnRK1 positively affected KFB PALs gene expression, and energy starvation upregulated KFB PAL expression, which partially depends on AtSnRK1. Collectively, our study reveals that SnRK1 negatively regulates phenylpropanoid biosynthesis, and KFB PALs act as regulatory components of the SnRK1 signaling network, transcriptionally regulated by SnRK1 and subsequently mediating proteasomal degradation of PAL in response to the cellular carbon availability.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Multi-strain analysis of Pseudomonas putida reveals the metabolic and genetic diversity of the species

Pseudomonas putida is a gram-negative bacterial species increasingly utilized in biotechnology due to its robust growth, ability to degrade aromatic compounds, solvent tolerance, and genetic tractability. In this study, we report a comprehensive multi-strain analysis of 164 P. putida strains based on the reconstruction of a pan-putida metabolic network and the formulation of strain-specific genome-scale metabolic models (GEMs). We performed whole-genome sequencing and hybrid assembly for 40 strains, contributing a ~8% increase to the available genomic data for P. putida . Furthermore, high-throughput phenotypic profiling using the Biolog phenotype microarray system for 24 strains on 190 unique carbon sources, along with 15 aromatic compounds not present on Biolog plates, yielded 4,920 unique strain-phenotype measurements. These data were leveraged to curate GEMs for 24 representative strains, including a refined model for strain KT2440, which comprised 1,480 genes and 2,191 metabolites, achieving a prediction accuracy of 91.2% in carbon utilization. Systematic comparison of genomes and GEMs revealed both conserved core pathways and significant allelic and functional divergence across strains, highlighting strain-specific variation in aromatic degradation. While pathways for protocatechuate and phenylacetate degradation were widely conserved, metabolic capabilities for compounds such as ferulate, phenol, and cresols varied markedly, suggesting adaptation to distinct ecological niches. Alleleome analysis of enzymes, such as PcaI and PcaJ, revealed distinct, functionally similar clades, indicating possible convergent evolution or horizontal gene transfer. These results provide computable resources and informative models for selecting P. putida strains with desired traits for biomanufacturing and bioremediation and offer insights into the evolution and phylogeny of the P. putida species.

aromatics utilization↗
DOE OSTI2024

Recovery of value-added compounds through fast pyrolysis of apple pomace hydrochar

The environmental challenges associated with food production can be addressed via the thermochemical upcycling of agro-industrial biomass. Two such methods, hydrothermal carbonization (HTC) and pyrolysis, can be coupled to first reduce the water content of wet biomass wastes by producing a hydrochar (HC) via HTC and then a bio-oil via pyrolysis of the HC. However, HTC of biomass results in the formation of secondary char (SC), an amorphous tar-like mixture resulting from organic compounds released into the aqueous phase that adsorb, recondense and polymerize on the parent biomass. This study investigated how HTC temperature impacts the formation of SC from apple pomace and the SC’s subsequent impact on fast pyrolysis products. HCs were produced at temperatures of 175°C, 200°C, and 250°C. Lower HTC temperatures favor the formation of biorefinery platform chemicals such as 5-hydroxymethylfurfural and levulinic acid, while higher temperatures result in increased lignin degradation products (i.e., phenolics). HCs were subjected to fast pyrolysis before and after SC extraction in two analytical pyrolysis instruments. Fast pyrolysis of HC produced compounds similar to those found in SC, but with variations in CO and CO 2 emissions. In conclusion, the combination of SC extraction and fast pyrolysis demonstrates promise for recovering value-added compounds from agro-industrial waste biomass while retaining a solid char for fuel and carbon management.

09 BIOMASS FUELS↗
DOE OSTI2020

Soil aggregate-mediated microbial responses to long-term warming

Soil microbial carbon use efficiency (CUE) is a combination of growth and respiration, which may respond differently to climate change depending on physical protection of soil carbon (C) and its availability to microbes. In a mid-latitude hardwood forest in central Massachusetts, 27 years of soil warming (+5 °C) has resulted in C loss and altered soil organic matter (SOM) quality, yet the underlying mechanisms remain unclear. In this work, we hypothesized that long-term warming reduces physical aggregate protection of SOM, microbial CUE, and its temperature sensitivity. Soil was separated into macroaggregate (250–2000 μm) and microaggregate (<250 μm) fractions, and CUE was measured with 18 O enriched water (H 2 18 O) in samples incubated at 15 and 25 °C for 24 h. We found that long-term warming reduced soil C and nitrogen concentrations and extracellular enzyme activity in macroaggregates, but did not affect physical protection of SOM. Long-term warming showed little effect on CUE or microbial biomass turnover time because it reduced both growth and respiration. However, CUE was less temperature sensitive in macroaggregates from the warmed compared to the control plots. Our findings suggest that microbial thermal responses to long-term warming occur mostly in soil compartments where SOM is less physically protected and thus more vulnerable to microbial degradation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Bacterial diversity dynamics in microbial consortia selected for lignin utilization

Lignin is nature’s largest source of phenolic compounds. Its recalcitrance to enzymatic conversion is still a limiting step to increase the value of lignin. Although bacteria are able to degrade lignin in nature, most studies have focused on lignin degradation by fungi. To understand which bacteria are able to use lignin as the sole carbon source, natural selection over time was used to obtain enriched microbial consortia over a 12-week period. The source of microorganisms to establish these microbial consortia were commercial and backyard compost soils. Cultivation occurred at two different temperatures, 30°C and 37°C, in defined culture media containing either Kraft lignin or alkaline-extracted lignin as carbon source. iTag DNA sequencing of bacterial 16S rDNA gene was performed for each of the consortia at six timepoints (passages). The initial bacterial richness and diversity of backyard compost soil consortia was greater than that of commercial soil consortia, and both parameters decreased after the enrichment protocol, corroborating that selection was occurring. Bacterial consortia composition tended to stabilize from the fourth passage on. After the enrichment protocol, Firmicutes phylum bacteria were predominant when lignin extracted by alkaline method was used as a carbon source, whereas Proteobacteria were predominant when Kraft lignin was used. Bray-Curtis dissimilarity calculations at genus level, visualized using NMDS plots, showed that the type of lignin used as a carbon source contributed more to differentiate the bacterial consortia than the variable temperature. The main known bacterial genera selected to use lignin as a carbon source were Altererythrobacter , Aminobacter , Bacillus , Burkholderia , Lysinibacillus , Microvirga , Mycobacterium , Ochrobactrum , Paenibacillus , Pseudomonas , Pseudoxanthomonas , Rhizobiales and Sphingobium . These selected bacterial genera can be of particular interest for studying lignin degradation and utilization, as well as for lignin-related biotechnology applications.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Cytochrome b 5 : A versatile electron carrier and regulator for plant metabolism

Cytochrome b 5 (CB5) is a small heme-binding protein, known as an electron donor delivering reducing power to the terminal enzymes involved in oxidative reactions. In plants, the CB5 protein family is substantially expanded both in its isoform numbers and cellular functions, compared to its yeast and mammalian counterparts. As an electron carrier, plant CB5 proteins function not only in fatty acid desaturation, hydroxylation and elongation, but also in the formation of specialized metabolites such as flavonoids, phenolic esters, and heteropolymer lignin. Furthermore, plant CB5s are found to interact with different non-catalytic proteins such as ethylene signaling regulator, cell death inhibitor, and sugar transporters, implicating their versatile regulatory roles in coordinating different metabolic and cellular processes, presumably in respect to the cellular redox status and/or carbon availability. Compared to the plentiful studies on biochemistry and cellular functions of mammalian CB5 proteins, the cellular and metabolic roles of plant CB5 proteins have received far less attention. This article summarizes the fragmentary information pertaining to the discovery of plant CB5 proteins, and discusses the conventional and peculiar functions that plant CB5s might play in different metabolic and cellular processes. Gaining comprehensive insight into the biological functions of CB5 proteins could offer effective biotechnological solutions to tailor plant chemodiversity and cellular responses to environment stimuli.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Association between soil organic carbon and calcium in acidic grassland soils from Point Reyes National Seashore, CA

Organo-mineral and organo-metal associations play an important role in the retention and accumulation of soil organic carbon (SOC). Recent studies have demonstrated a positive correlation between calcium (Ca) and SOC content in a range of soil types. However, most of these studies have focused on soils that contain calcium carbonate (pH > 6). To assess the importance of Ca-SOC associations in lower pH soils, we investigated their physical and chemical interaction in the grassland soils of Point Reyes National Seashore (CA, USA) at a range of spatial scales. Multivariate analyses of our bulk soil characterisation dataset showed a strong correlation between exchangeable Ca (Ca Exch ; 5–8.3 c.mol c kg –1 ) and SOC (0.6–4%) content. Additionally, linear combination fitting (LCF) of bulk Ca K-edge X-ray absorption near-edge structure (XANES) spectra revealed that Ca was predominantly associated with organic carbon across all samples. Scanning transmission X-ray microscopy near-edge X-ray absorption fine structure spectroscopy (STXM C/Ca NEXAFS) showed that Ca had a strong spatial correlation with C at the microscale. The STXM C NEXAFS K-edge spectra indicated that SOC had a higher abundance of aromatic/olefinic and phenolic C functional groups when associated with Ca, relative to C associated with Fe. In regions of high Ca-C association, the STXM C NEXAFS spectra were similar to the spectrum from lignin, with moderate changes in peak intensities and positions that are consistent with oxidative C transformation. Through this association, Ca thus seems to be preferentially associated with plant-like organic matter that has undergone some oxidative transformation, at depth in acidic grassland soils of California. Our study highlights the importance of Ca-SOC complexation in acidic grassland soils and provides a conceptual model of its contribution to SOC preservation, a research area that has previously been unexplored.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

A High-Quality Genome-Scale Model for Rhodococcus opacus Metabolism

Rhodococcus opacus is a bacterium that has a high tolerance to aromatic compounds and can produce significant amounts of triacylglycerol (TAG). Here, we present iGR1773, the first genome-scale model (GSM) of R. opacus PD630 metabolism based on its genomic sequence and associated data. The model includes 1773 genes, 3025 reactions, and 1956 metabolites, was developed in a reproducible manner using CarveMe, and was evaluated through Metabolic Model tests (MEMOTE). We combine the model with two Constraint-Based Reconstruction and Analysis (COBRA) methods that use transcriptomics data to predict growth rates and fluxes: E-Flux2 and SPOT (Simplified Pearson Correlation with Transcriptomic data). Growth rates are best predicted by E-Flux2. Flux profiles are more accurately predicted by E-Flux2 than flux balance analysis (FBA) and parsimonious FBA (pFBA), when compared to 44 central carbon fluxes measured by 13C-Metabolic Flux Analysis (13C-MFA). Under glucose-fed conditions, E-Flux2 presents an R2 value of 0.54, while predictions based on pFBA had an inferior R2 of 0.28. We attribute this improved performance to the extra activity information provided by the transcriptomics data. For phenol-fed metabolism, in which the substrate first enters the TCA cycle, E-Flux2’s flux predictions display a high R2 of 0.96 while pFBA showed an R2 of 0.93. We also show that glucose metabolism and phenol metabolism function with similar relative ATP maintenance costs. These findings demonstrate that iGR1773 can help the metabolic engineering community predict aromatic substrate utilization patterns and perform computational strain design.

Roell, Garrett W.↗
DOE OSTI2023

Aromatic Monomer Production from Lignin Through Catalytic Carbon-Carbon Bond Cleavage

The conversion of lignin, the heterogeneous aromatic polymer found in terrestrial plant cell walls, into renewable bio-derived chemicals is critical to enable a viable lignocellulose-based bioeconomy. While lignin finds some limited industrial uses today, cost-effective and robust processes for the depolymerization of lignin to aromatic monomers would substantially expand lignin applications to larger markets, such as sustainable polymers and commodity chemicals. Historically, catalytic lignin depolymerization has focused on aryl-ether bond cleavage. A large fraction of aromatics in lignin, however, is linked by various recalcitrant carbon-carbon (C-C) bonds, which present a challenging substrate for depolymerization to aromatic monomers at high yields. To increase monomer yields above those accessible through aryl-ether bond cleavage alone, here we report that autoxidation catalysis cleaves C-C bonds in various lignin substrates with high atom economy. The catalyzed autoxidations of phenol-protected reductive catalytic fractionation (RCF) oil oligomers and hydrodeoxygenation (HDO) oil are described. The stream oxygenated monomers produced from the various lignin substrates are bioavailable as demonstrated by their bioconversion to cis,cis-muconate by engineered strains of Pseudonomas putida.

autoxidation↗
DOE OSTI2022

Probing elemental speciation in hydrochar produced from hydrothermal liquefaction of anaerobic digestates using quantitative X-ray diffraction

Valorization of hydrochar, a solid byproduct from hydrothermal liquefaction (HTL) of anaerobically-digested agriculture wastes (digestates), requires fundamental knowledge of elemental speciation. This study investigated the effects of reaction temperatures (320–360 °C), digestate pH (3.5–8), and digestate cellulose-to-lignin ratios (0.2–1.8) on the speciation (chemical form) and composition of organics and inorganics in hydrochars produced during hydrothermal treatment. Quantitative X-ray diffraction (XRD) method was the primary technique used to characterize hydrochars. The comprehensive XRD pattern processing including the Rietveld refinement protocols demonstrated that the organic phase was comprised of mostly crystalline monocyclic, heterocyclic, and polycyclic aromatics with diverse aliphatic and aromatic substituents, while the inorganic mineral phase consisted of calcium-phosphates, magnesium-phosphates, calcium-carbonates, and magnesium-carbonates. Further, XRD results were validated by the elemental yields of products and the distribution of chemical functionalities measured using solid-state nuclear magnetic resonance (NMR) spectroscopy. The characterization data were used to evaluate proposed mechanistic pathways using compositional analysis of biocrude and aqueous-phase coproducts. Mechanistic pathways developed in the study suggested that benzoic acids, phenols, benzaldehydes, phenolic aldehydes, α-dicarbonyls, and α-hydroxycarbonyls were responsible for the precipitation of organics through various reactions depending on operating conditions. Meanwhile, the formation of inorganic compounds appeared to be consistently represented by reactions including dehydration, hydrolysis, endergonic reduction, and structure rearrangement of native minerals in the digestates. This study provides basic knowledge needed to create and assess potential elemental speciation pathways. In addition, the results of the study facilitate the specification of process conditions to optimize targeted utilization routes of hydrochar for more economically-feasible and sustainable HTL processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Strategies for solving the excited-state self-consistent-field problem for highly excited and multiply ionized states

The dynamics of molecules exposed to intense x-ray radiation involve a large number of multiply ionized and highly excited electronic configurations. To model these dynamics a reliable and efficient electronic structure model is imperative. Employing the Hartree-Fock-Slater electronic structure model in combination with the maximum overlap method, we quantify the associated convergence failures when calculating electronic states of carbon monoxide with multiple vacancies in the core and valence levels. Here, we characterize these cases and describe strategies to overcome the convergence problems. The described techniques not only eliminate all convergence issues for CO but also result in a significant reduction of convergence failures for simulations of the x-ray-induced multiple ionization dynamics of the phenol molecule.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Flavonoids naringenin chalcone, naringenin, dihydrotricin, and tricin are lignin monomers in papyrus

Recent studies demonstrate that several polyphenolic compounds produced from beyond the canonical monolignol biosynthetic pathways can behave as lignin monomers, participating in radical coupling reactions and being incorporated into lignin polymers. Here, we show various classes of flavonoids, the chalconoid naringenin chalcone, the flavanones naringenin and dihydrotricin, and the flavone tricin, incorporated into the lignin polymer of papyrus (Cyperus papyrus L.) rind. These flavonoids were released from the rind lignin by Derivatization Followed by Reductive Cleavage (DFRC), a chemical degradative method that cleaves the β-ether linkages, indicating that at least a fraction of each was integrated into the lignin as β-ether-linked structures. Due to the particular structure of tricin and dihydrotricin, whose C-3' and C-5' positions at their B-rings are occupied by methoxy groups, these compounds can only be incorporated into the lignin through 4'–O–β bonds. However, naringenin chalcone and naringenin have no substituents at these positions and can therefore form additional carbon–carbon linkages, including 3'– or 5'–β linkages that form phenylcoumaran structures not susceptible to cleavage by DFRC. Furthermore, Nuclear Magnetic Resonance analysis indicated that naringenin chalcone can also form additional linkages through its conjugated double bond. The discovery expands the range of flavonoids incorporated into natural lignins, further broadens the traditional definition of lignin, and enhances the premise that any phenolic compound present at the cell wall during lignification could be oxidized and potentially integrated into the lignin structure, depending only on its chemical compatibility. This study indicates that papyrus lignin has a unique structure, as it is the only lignin known to date that integrates such a diversity of phenolic compounds from different classes of flavonoids. This discovery will open up new ways to engineer and design lignins with specific properties and for enhanced value.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Chemical plasticity in the fine root construct of Quercus spp. varies with root order and drought

ne roots of trees exhibit high plasticity to adapt to environmental stress. Although the morphological and physiological plasticity of roots has been well studied, less explored are the accompanying changes in the chemical plasticity of fine roots, which regulates both root function and soil carbon sequestration. We investigated the changes in quantity, composition and localization of compounds in different fine root orders of Quercus alba and Quercus rubra subjected to drought stress. The total quantity of lignins varied only by root orders where distal (1+2) orders had lower lignin compared to higher orders. However, the 1+2 orders had higher guaiacyl lignin and bound phenolics, which provide greater protection from environmental stress. Unlike lignins, drought altered the quantity and composition of tannins. In Q. alba, the ellagitannins decreased in the 1+2 orders exposed to drought. The lower content of ellagitannins with antimicrobial properties reveals a strategic adaptive response by fine roots to facilitate symbiotic association, as evidenced by the higher colonization of ectomycorrhizal fungi, which help in drought tolerance. Our study revealed that the chemical construct of different heteropolymers varied differently across root orders when exposed to drought, indicating the importance of chemical plasticity of fine roots to adapt to environmental stress

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Alkylation of monomeric, dimeric, and polymeric lignin models through carbon-hydrogen activation using Ru-catalyzed Murai reaction

In this study, we have assessed directed carbon-hydrogen activation (CHA) for alkylation of monomeric, dimeric, and polymeric lignin models using Murai's catalyst [RuH 2 (CO)(PPh 3 ) 3 ]. Based on related work from our laboratory showing that isolated organosolv lignin bears benzylic directing groups ideal for CHA reactions, this approach could offer new methodology for the valorization of biorefinery lignin. Monomeric and dimeric models bearing a keto group at the benzylic position undergo Ru-catalyzed alkylation in good to excellent yield. Similarly, models bearing a benzylic OH group also undergo alkylation via a tandem oxidation/alkylation process enabled by the Ru catalyst. Polymeric models show low levels of functionalization as a result of the poor solubility of the starting polymer. With unsymmetrical models, functionalization occurs first at the least sterically hindered ortho-site, but a subsequent alkylation, leading to disubstituted products can occur at the more sterically hindered site, leading to hexasubstituted arenes. The reaction shows sensitivity to free phenolic OH groups, which appears to reduce the yield in some reactions, and is also a contributing factor to the low yields observed with polymeric lignin models. Finally, combining CHA methodology with lignin isolation technology able to introduce appropriate directing groups for catalytic functionalization will form the basis for improved conversion of lignin to high value chemical products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Technical Lignin Fractionation: A Powerful Tool for Lignin Structure Homogenization and Its Application

Extracted lignin as a by-product of pulping and bio-refining processes is the main available bio-phenolic polymer. The structural complexity, polydispersity, and black color of lignin are the main limiting factors for its application. Preparation of lignin with lower structural complexity and polydispersity through lignin fractionation is one of the primary solutions to engineer lignin into a value-added material. Sequential lignin fractionation was developed based on pH reduction from alkaline to acidic using mineral acids and was recently optimized using carbon dioxide as a pH controller. The partial solubility of lignin in organic solvents is another promising method for lignin fractionation. Organic solvents with different polarity and solubility factors are able to fractionate lignin, yielding a more homogeneous chemical structure. As a modification of the lignin fractionation process, the use of solvents, water/organic solvent mixtures, such as alcohols, and acetic acid from room to high temperature has been proposed as a greener method for lignin fractionation. Using membrane technology is another promising method and current results indicate its good potential for lignin recovery and fractionation.

Sadeghifar, Hasan↗
DOE OSTI2022

Molecular Characterization of Water-Soluble Brown Carbon Chromophores in Snowpack from Northern Xinjiang, China

This study reports molecular-level characterization of brown carbon (BrC) attributed to water-soluble organic carbon in six snowpack samples collected from northern Xinjiang, China. Here, the molecular composition and light-absorbing properties of BrC chromophores were unraveled by application of high-performance liquid chromatography (HPLC) coupled to a photodiode array (PDA) detector and high-resolution mass spectrometry. The chromophores were classified into five major types, that is, (1) phenolic/lignin-derived compounds, (2) flavonoids, (3) nitroaromatics, (4) oxygenated aromatics, and (5) other chromophores. Identified chromophores account for ~23–64% of the total light absorption measured by the PDA detector in the wavelength range of 300–370 nm. In the representative samples from urban and remote areas, oxygenated aromatics and nitroaromatics dominate the absorption in the wavelengths below and above 320 nm, respectively. The highly polluted urban sample shows the most complex HPLC-PDA chromatogram, and more other chromophores contribute to the bulk absorption. Phenolic/ lignin-derived compounds are the most light-absorbing species in the soil-influenced sample. Chromophores in two remote samples exhibit ultraviolet–visible features distinct from other samples, which are attributed to flavonoids. Identification of individual chromophores and quantitative analysis of their optical properties are helpful for elucidating the roles of BrC in snow radiative balance and photochemistry.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Towards functionalized lignin and its derivatives for high-value material applications

In pursuit of low-carbon development, the production of diverse functional materials from renewable resources, especially lignocellulosic biomass, is of vital importance. Lignin is a major component of lignocellulose, and it is nature's only true high-volume aromatic polymer, which has the advantages of biodegradability, biocompatibility, and low acquisition cost. After modification by a variety of physicochemical strategies, it can be applied as an alternative to basic industrial materials, including polyurethanes, phenolic, and epoxy resins, which stands comparably to conventional synthetic polymers in terms of both performance and reduced cost. To further unlock the potential of lignin, an alluring opportunity is the exploitation of lignin for high-value materials, especially nanomaterials, that find extensive applications in energy and environment areas. This review provides a systematic summary and perspective of research that has been devoted to lignin transformation to high-value materials, ranging from industrially well-established engineering materials to the recently emerged nanomaterials that were used for energy and environment applications. Latest cutting-edge innovations on lignin modification, controlled depolymerization, and assembly during the last five years are summarized. Structure-function relationships of lignin materials in terms of their specific applications are analyzed. Furthermore, challenges and future opportunities for lignin conversion to high-value materials are also provided. We wish this review will stimulate further advances in lignin based high-value materials, and promote “waste” into “wealth”.

36 MATERIALS SCIENCE↗